The Role of Halogens in the Plasma Polymerization of Hydrocarbons

Vinyl chloride, vinyl fluoride, and tetrafluoroethylene were polymerized in a radio frequency electric glow discharge. It was found that when compared with the unhalogenated simple hydrocarbons, the rates of polymer deposition are in the order vinyl chloride, acetylene, tetrafluoroethylene, vinyl fluoride, ethylene. This observation can be rationalized by considering the ease with which free radical and unsaturated species can be formed in the plasma. IR spectra show that the structures of plasma-polymerized vinyl chloride and vinyl fluoride are in many respects similar to the plasma-polymerized hydrocarbon. The spectrum of plasma-polymerized tetrafluoroethylene, however, does not resemble that of conventional polytetrafluoroethylene. Addition of dichlorodifluoromethane to the monomer stream dramatically increased the polymer deposition rate; the effect is more subdued for chloromethane and is negligible for tetrafluoromethane. Elemental analysis indicates that little of the added halogens is present in the resultant polymers. Thus the halogenated compounds appear to act as a gas phase catalyst for the plasma polymerization of hydrocarbons.     

Solvent selection for matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometric analysis of synthetic polymers employing solubility parameters

The principle relating to the selection of a proper matrix, cationization reagent, and solvent for matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry (MALDI‐TOF MS) of synthetic polymers is still a topic of research. In this work we focused on the selection of a suitable MALDI solvent. Polystyrene PS7600 and poly(ethylene glycol) PEG4820 were analyzed by MALDI‐TOF MS using various solvents which were selected based on the Hansen solubility parameter system. For polystyrene (PS), dithranol was used as the matrix and silver trifluoroacetate as the cationization reagent whereas, for poly(ethylene glycol) (PEG), the combination of 2,5‐dihydroxybenzoic acid and sodium trifluoroacetate was used for all experiments. When employing solvents which dissolve PS and PEG, reliable MALDI mass spectra were obtained while samples in non‐solvents (solvents which are not able to dissolve the polymer) failed to provide spectra. It seems that the solubility of the matrix and the cationization reagent are less important than the polymer solubility. Copyright © 2010 John Wiley & Sons, Ltd.     

Mass spectrometric analysis of chain end functionalization in ab initio cationic polymerization

Matrix assisted laser desorption ionization time of flight mass spectrometry (MALDI-TOF MS) and LC-ESI MS was applied in the analysis of ab initio chain end functionalization in cationic polymerization of isobutyl vinyl ether. Well-resolved mass spectra of vinyl ether oligomers were obtained. The MALDI spectra give information on polymerization and functionalization process, as well as chain end functionality and side reactions occurred in the system.     

Characterization of low-fouling ethylene glycol containing plasma polymer films

Low-protein-fouling poly(ethylene glycol) (PEG-like) plasma polymer films were prepared using radio frequency glow discharge polymerization of diethylene glycol dimethyl ether (DGpp) on top of a heptylamine plasma polymer primer layer. By varying the plasma deposition conditions, the chemistry of the DGpp film was influenced, especially in regard to the level of ether content, which in turn influenced the relative levels of bovine serum albumin and lysozyme protein fouling. Surface potential measurements indicated that these surfaces carried a net negative charge. While protein fouling remained low ( approximately 10 ng/cm2), there was a slightly higher level of the positively charged protein adsorbed on these films than the negative protein. The interaction forces measured between a silica spherical surface on both "high"- and "low"-protein-fouling DGpp films were all repulsive and short ranged (2-3 nm). There was no correlation between the surface forces measured for high- and low-protein-fouling DGpp films. Thus, it appears that enthalpic effects are very important in reducing protein adsorption. We therefore conclude that it is the concentration of residual, ethylene glycol containing species that are the crucial parameter determining protein resistance due to a combination of both entropic and enthalpic effects.     

Control of polymer topology through transition-metal catalysis: synthesis of hyperbranched polymers by cobalt-mediated free radical polymerization

A novel approach was demonstrated for the synthesis of hyperbranched polymers by direct free radical polymerization of divinyl monomers controlled by a cobalt chain transfer catalyst (1). By controlling the competition between propagation and chain transfer with 1, the free radical polymerization of ethylene glycol dimethacrylate (3) afforded soluble hyperbranched polymers in one pot. The structure of the hyperbranched polymers was confirmed by (1)H and (13)C NMR. The molecular weight and intrinsic viscosity of the hyperbranched polymers were measured by matrix-assisted laser desorption ionization (MALDI) mass spectrometry and size exclusion chromatography (SEC) equipped with triple detectors. The intrinsic viscosities of the hyperbranched polymers are much lower than those of their linear analogues and do not show molecular weight dependence. The unique structure and properties of these hyperbranched polymers combined with the commercial availability of many divinyl monomers and the robustness of free radical polymerization make this new approach attractive for the preparation of new functional materials.     

Temperature-responsive swelling and deswelling of the copolymers from vinyl ether of ethylene glycol and butyl vinyl ether

Linear and crosslinked copolymers of a vinyl ether of ethylene glycol (2-hydroxyethyl vinyl ether, ( 1 )) and butyl vinyl ether ( 2 ) are synthesized by α-irradiation polymerization. It is shown that the linear copolymers exhibit a phase separation phenomenon in dependence of the temperature due to the destruction of hydrogen bonds and the enhancement of hydrophobic interaction in aqueous solution. The processes of reversible swelling or shrinking upon temperature change are demonstrated for polymer networks.     

Copolymerization of butyl vinyl ether and methyl methacrylate by combination of radical and radical promoted cationic mechanisms

Butyl vinyl ether (BVE) and methyl methacrylate (MMA) mixtures were polymerized by using free radical initiators in conjunction with a cationic initiator such as diphenyl iodonium salt. Polymerization mechanism involves free radical polymerization of MMA which is switched to cationic polymerization of BVE by addition of growing poly(MMA) radicals to BVE and subsequent oxidation of electron donating polymeric radicals to the corresponding cations by iodonium ions. Two representative bifunctional monomers, ethylene glycol divinyl ether (EGDVE) and ethylene glycol dimethacrylate (EGDMA) were also used together with MMA and BVE, respectively, in photo and thermal crosslinking polymerizations. Vinyl ether and methacrylate type monomers can successfully be copolymerized by this double-mode polymerization under photochemical conditions.     

The influence of electrospray deposition in matrix-assisted laser desorption/ionization mass spectrometry sample preparation for synthetic polymers

Although electrospray sample deposition in matrix-assisted laser desorption/ionization (MALDI) mass spectrometry (MS) sample preparation increases the repeatability of both the MALDI signal intensity and the measured molecular mass distribution (MMD), the electrospray sample deposition method may influence the apparent MMD of a synthetic polymer. The MMDs of three polymers of differing thermal stability, polystyrene (PS), poly(ethylene glycol) (PEG), and poly(propylene glycol) (PPG), were studied by MALDI time-of-flight (TOF) MS as the electrospray deposition voltage was varied. The MMDs obtained using the electrospray deposition method were compared with those obtained for hand-spotted samples. No change was observed in the measured polymer MMD when the electrospray deposition voltage was varied in the analysis of PS, but those of PEG and PPG changed at higher electrospray voltages due to increased ion fragmentation. It was also shown that the fragmentation in the hand-spotted samples is dependent on the matrix used in sample preparation.     

Novel synthesis of photocrosslinkable polymers

A new preparative route to photocrosslinkable polymers in which the polymers are produced directly from the polymerization of vinyl monomers having photocrosslinkable groups has been investigated. The photosensitive resins thus produced have higher sensitivity and resolution than conventional photosensitive resins. The monomers were synthesized from the esterification of vinylphenols or vinyl β-chloroethyl ether with cinnamic acid, β-styrylacrylic acid, and their homologs, and from the etherification of vinyl β-chloroethyl ether with hydroxychalcones. Homopolymerizations of these monomers and their copolymerizations with other comonomers were investigated with the use of both radical and ionic initiators. It is shown that radical polymerization of the monomers gave soluble polymers only at low conversion. Anionic initiators did not initiate polymerization. Cationic polymerization imparted soluble polymers in high yield, except for the monomers bearing cyano groups, which generally gave insoluble polymers. Infrared and NMR spectroscopic investigation of the cationically obtained soluble polymers and comparative investigation by cationic polymerization of model compounds indicated that polymerization of the monomers proceeds through the vinyl double bond without affecting the photosensitive unsaturated bond. Thus, linear photocrosslinkable polymers with an intact photoreactive group may be produced by cationic polymerization. In general, these polymers have uniform structure and modifiable physical properties depending on the monomer used. The polymer thus obtained from β-vinyloxyethyl cinnamate has been shown to have excellent properties for use as a photo-resist.     

Composite proton-conducting membranes based on poly(ethylene glycol vinyl glycidyl ether)

Composite proton-conducting membranes in the form of interpolymer films are prepared in an aqueous medium from sulfo-acid-modified poly(ethylene glycol vinyl glycidyl ether) and poly(vinyl alcohol). The initial poly(hydroxysulfo acid) is synthesized through the radical polymerization of ethylene glycol vinyl glycidyl ether followed by modification with sodium sulfite via epoxy groups and treatment with a cationite in the H form. The proton-conducting membranes feature improved thermal stability (200–250°C), a breaking strength of 1.0–8.9 MPa, elasticity (a relative elongation at break of 1.0–8.2%), chemical resistance, and specific proton conductivity attaining 10^?1 S/cm after doping with orthophosphoric acid.     

Ultrasonic energy as a tool in the sample treatment for polymer characterization through matrix-assisted laser desorption ionization time-of-flight mass spectrometry

Different ultrasonic devices including ultrasonic bath with dual frequency, sonoreactor and ultrasonic probe, were tested for their viability in the sample treatment for polymer characterization by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry analysis. The effect of sonication frequency (35 kHz, 40 kHz and 130 kHz), sonication amplitude, and sonication time on the polymer's number-average molecular weight (M_n) and weight-average molecular weight (M_w) were investigated. The effect of those variables in the molecular mass distribution of three polymer standards, poly(styrene) 2000 Da and 10,000 Da and poly(ethylene glycol) 1000 Da, was evaluated. In addition, the influence of ultrasonic energy on the sample treatment as a function of the matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI) matrix was also studied through two common standard matrices, dithranol and 2,5-dihydroxybenzoic acid. The results obtained show that the ultrasonic bath at 35 kHz is the best option for the purpose of fast sample treatment for polymer characterization. The M_n and M_w values obtained for this ultrasonic device and for the three polymers tested using dithranol as MALDI matrix, were not statistically different from the ones acquired with vortex mixing and also were in concordance with the values recommended by the polymer manufacturers.     

Polymerization of allyl(vinyl phenyl) ethers and reactions of the resulting polymers

Solution polymerizations of allyl(o-vinyl phenyl)ether and allyl(p-vinyl phenyl)ether with cationic and radical initiators were investigated. Soluble polymers were formed in polymerizations with boron trifluoride etherate and with benzoyl peroxide. In polymerization with azobisisobutyronitrile the polymerization in dilute solution gave a soluble polymer, whereas that in concentrated solution gave a crosslinked, insoluble one. For informationon the polymerization behavior some infrared and ultraviolet spectroscopic investigations of the soluble polymers were made. From these results it appears that polymers with pendant allyl groups are formed in polymerization with boron trifluoride etherate at low temperature, and polymers containing pendant vinyl groups and allyl groups are obtained with the two types of radical initiator. Copolymerizations of these monomers with ethyl vinyl ether and styrene with the use of boron trifluoride etherate were sucessfully effected. Such reactions as Claisen rearrangement, crosslinking induced with radical initiators, and epoxidation with perbenzoic acid were examined for the polymers prepared in the polymerization with boron trifluoride etherate. Good results were obtained for the former two reactions. However, the latter was unsuccessful.     

Living cationic polymerization of vinyl ethers with a naphthyl group: Decisive effect of the substituted position on naphthalene ring

Living cationic polymerization of a vinyl ether with a naphthyl group [2‐(2‐naphthoxy)ethyl vinyl ether, βNpOVE] was achieved using base‐assisting initiating systems with a Lewis acid. The Et_1.5AlCl_1.5/1,4‐dioxane or ethyl acetate system induced the living cationic polymerization of βNpOVE in toluene at 0 °C. The living nature of this reaction was confirmed by a monomer addition experiment, followed by ¹H NMR and matrix‐assisted laser desorption ionization time‐of‐flight mass spectrometry (MALDI‐TOF‐MS) analyses. In contrast, the polymerization of αNpOVE was not fully controlled; under similar conditions, it produced polymers with broad molecular weight distributions. The ¹H NMR and MALDI‐TOF‐MS spectra of the resultant poly(αNpOVE) revealed that the products had undesirable structures derived from Friedel–Crafts alkylation. The higher reactivity of αNpOVE in electrophilic substitution reactions, such as the Friedel–Crafts reaction, was attributable to the greater electron density of the naphthyl ring, which was calculated based on frontier orbital theory. The naphthyl groups significantly affected the properties of the resultant polymer. For example, the glass transition temperatures (T_g) of poly(NpOVE)s are higher by approximately 40 °C than that of poly(2‐phenoxyethyl vinyl ether). © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Evaluating Atmospheric pressure Solids Analysis Probe (ASAP) mass spectrometry for the analysis of low molecular weight synthetic polymers

Atmospheric pressure Solids Analysis Probe (ASAP) mass spectrometry has facilitated the ionisation of oligomers from low molecular weight synthetic polymers, poly(ethylene glycol) (PEG: M(n) = 1430) and poly(styrene) (PS: M(n) = 1770), directly from solids, providing a fast and efficient method of identification. Ion source conditions were evaluated and it was found that the key instrument parameter was the ion source desolvation temperature which, when set to 600 °C was sufficient to vapourise the heavier oligomers for ionisation. PS, a non-polar polymer that is very challenging to analyse by MALDI or ESI without the aid of metal salts to promote cationisation, was ionised promptly by ASAP resulting in the production of radical cations. A small degree of in-source dissociation could be eliminated by control of the instrument ion source voltages. The fragmentation observed through in-source dissociation could be duplicated in a controlled manner through Collision-Induced Dissociation (CID) of the radical cations. PEG, which preferentially ionises through adduction with alkali metal cations in MALDI and ESI, was observed as a protonated molecular ion by ASAP. In-source dissociation could not be eliminated entirely and the fragmentation observed resulted from cleavage of the C-C and C-O backbone bonds, as opposed to only C-O bond cleavage observed from tandem mass spectrometry.     

Rodlike macromolecules through spatial overlapping of thiophene dendrons

Two novel dendritic macromonomers 7 and 8 functionalized with electroactive conjugated thiophene oligomers were synthesized by stepwise cross‐coupling reactions and the introduction of a vinyl group at the focal point. Both macromonomers were polymerized into dendronized polymers 9 and 10 by using a radical polymerization method. The photophysical and redox behaviors of dendronized polymers 9 and 10 are significantly different from those of the corresponding macromonomers. This difference may result from the spatial overlapping of thiophene dendrons through π–π interactions when the dendrons are connected to a polymer backbone. The dendronized polymers can organize into large‐area two‐dimensional sheets with a thickness of 4.8 nm. Polymer 9 , which has all‐dendritic thiophene side chains, exhibited enhanced conductivity by partial doping with iodine or nitrosonium tetrafluoroborate (NOBF₄). The novel amphiphilic dendronized polymer 15 was synthesized by the atom‐transfer radical polymerization of macromonomer 7 from a poly(ethylene glycol) (PEG) macroinitiator and was found to have a self‐organized structure in water.     

Solvent-free MALDI investigation of the cationization of linear polyethers with alkali metals

The MALDI technique with solvent-free sample preparation has been applied to evaluate relative gas-phase affinities of polyether chain polymers with alkali metal cations. The study is performed on poly(ethylene glycol) and poly(propylene glycol) polymers of different lengths (PEG600, PEG1000, PPG425, PPG750) and the alkali metal cations Li(+), Na(+), K(+), and Cs(+). The experiments show that the lattice energy of the alkali metal salts employed as cation precursors can have a strong influence on the outcome of conventional MALDI measurements. With the solvent-free method, these crystal binding effects can be made negligible by combining in the same sample alkali metal salts with different counterions. The recorded MALDI spectra show that the polyether-cation aggregation efficiencies decrease systematically with growing cation size. This cation size selectivity is considerably enhanced for the polymers with the shorter chains, which can be attributed to the reduced ability of the polymer to build a coordination shell around the larger cations. The steric effects introduced by the side CH3 group of propylene glycol with respect to ethylene glycol also enhance the preference for cationization of the polymer by the smaller cations. These observations correct some qualitative trends derived from previous studies, which did not account for lattice energy effects of the cation precursors.     

Synthesis and properties of polymer brushes composed of poly(diphenylacetylene) main chain and poly(ethylene glycol) side chains

Novel cylindrical polymer brushes consisting of poly(diphenylacetylene) main chain and poly(poly(ethylene glycol) methyl ether monomethacrylate) (PPEGMA) side chains were synthesized by the diphenylacetylene macromonomer or side chain initiated atom transfer radical polymerization (ATRP) of poly(ethylene glycol) methyl ether monomethacrylate (PEGMA) from an bromo isobutyryl-bearing poly(diphenylacetylene) (poly(BrDPA)) method. The diphenylacetylene macromonomer, namely, DPA-PPEGMA, were prepared by the ATRP of PEGMA from bromo isobutyryl-bearing diphenylacetylene. DPA-PPEGMA was polymerized successfully with WCl₆-Ph₄Sn catalyst to give high molecular weight polymer brushes poly(DPA-PPEGMA). Meanwhile, polymer brushes (PDPA-g-PPEGMA) were obtained by ATRP of PEGMA from poly(BrDPA). The molecular weight of the side chains of PPEGMA could be controlled simply by modulating the ATRP time. The macromonomer and polymer brushes are soluble in nonpolar solvents such as toluene and chloroform. The polymers of poly(BrDPA) and poly(DPA-PPEGMA) absorb in the longer wavelength region, with two peaks at around 370 and 414 nm. The polymers are thermally stable and exhibit double crystallization and melting peaks during the cooling and heating scans.     

Influence of chain end groups on the matrix-assisted laser desorption/ionization spectra of polymer blends

The positive ion matrix-assisted laser desorption/ionization (MALDI) spectrum of an equimolar blend of Nylon 6 (Ny6) and hydroxyl-terminated polybutyleneterephthalate (PBT) shows a surprisingly strong imbalance between the two components. Since the average molar masses and the polydispersions of the two polymers are comparable, it follows that the efficiency of MALDI is quite different for the two components of the blend. This finding prompted us to a more detailed study, and to synthesize Ny6 and PBT samples terminated with different end groups, in order to analyze their blends by MALDI. The negative ion MALDI spectra of the mixtures investigated show that PBT samples do not yield signals, so that only Ny6 peaks appear in these spectra. By comparing positive and negative ion MALDI spectra of mixtures of Ny6 terminated with various end groups, it was found that the peak intensity depends on the nature of the end groups. The results reported in the present study may help to clarify some fundamental aspects of the mechanisms of ion formation, when MALDI mass spectrometry is applied to macromolecules. End group ionization efficiency appears to be the most important parameter in determining the relative intensity of peaks in the MALDI spectra of the polymer blends investigated. End-group-dependent ionization is the key to the rationalization of the relative peak intensities in MALDI spectra of polymer mixtures.     

Trapping of Thiol Terminated Acrylate Polymers with Divinyl Sulfone to Generate Well-Defined Semi-Telechelic Michael Acceptor Polymers

Herein we report the synthesis of vinyl sulfone end functionalized PEGylated polymers by reversible addition-fragmentation chain transfer (RAFT) polymerization for conjugation to proteins. Poly(ethylene glycol) methyl ether acrylate (PEGA) was polymerized in the presence of 1-phenylethyl dithiobenzoate with 2,2'-azobis(2-methylpropionitrile) as the initiator to generate well-defined polyPEGAs with number-average molecular weights (M(n)) by gel permeation chromatography (GPC) of 6.7 kDa, 11.8 kDa and 16.1 kDa. Post-polymerization, the majority of polymer chains contained the dithioester functional group at the omega chain end, and the polydispersity indexes (PDI) of the polymers ranged from 1.08 to 1.24. The dithioester was subsequently reduced via aminolysis, and the resulting thiol was trapped with a divinyl sulfone in situ to produce semi-telechelic, vinyl sulfone polyPEGAs with efficiencies ranging between 85% and 99%. It was determined that the retention of vinyl sulfone was directly related to reaction time, with the maximum dithioester being transformed into a vinyl sulfone within 30 minutes. Longer reaction times resulted in slow decomposition of the vinyl sulfone end group. The resulting semi-telechelic vinyl sulfone polymers were then conjugated to a protein containing a free cysteine, bovine serum albumin (BSA). Gel electrophoresis demonstrated that the reaction was highly efficient and that conjugates of increasing size were readily prepared. After polymer attachment, the activity of the BSA was 92% of the unmodified biomolecule.     

Synthesis and Characterization of Uncharged Water‐Soluble Star Polymers Containing a Porphyrin Core

Uncharged water‐soluble porphyrins were prepared by reaction between tetrakis(p‐hydroxyphenyl)porphyrin and chlorinated poly(ethylene glycol) methyl ethers of different molecular weights. Water‐solubility was achieved by binding four poly(ethylene glycol) branches to a porphyrin core to give star polymers with molecular weights in the range 2000–21 000 Da. Structural characterization of these star polymers was performed by means of gel permeation chromatography, NMR spectroscopy, and MALDI‐TOF analysis.