Adsorption of methylene blue onto sonicated sepiolite from aqueous solutions

The aim of the present study is to enhance the methylene blue (MB) adsorption of sepiolite by ultrasonic treatment. The natural sepiolite was pretreated by sonication to improve the surface characteristics and enhance the dye uptake capacity. Sonication process resulted in a significant increase in the specific surface area (SSA) of sepiolite. The FTIR spectrum of the sonicated sepiolite indicates that the tetrahedral sheet is probably distorted after sonication process. The effect of various parameters such as sonication, pH, initial dye concentration and temperature on dye adsorption has been investigated. The adsorbed amount of MB on sepiolite increased after sonication as well as with increasing pH and temperature. The experimental data were evaluated by applying the pseudo-first- and second-order, and the intraparticle diffusion adsorption kinetic models. Adsorption process of MB onto sepiolite followed the pseudo-second-order rate expression. The experimental data were analyzed by Langmuir and Freundlich isotherms, and found that the isotherm data were reasonably well correlated by Langmuir isotherm. Maximum monolayer adsorption capacity of sepiolite for MB increased from 79.37 to 128.21 mg/g after the sonication. Various thermodynamic parameters, such as ΔG⁰, ΔH⁰ and ΔS⁰ were calculated. The thermodynamics of MB/sepiolite system indicated spontaneous and endothermic nature of the process. Adsorption measurements showed that the process was very fast and physical in nature.     

Equilibrium and kinetic modeling of adsorptive sulfur removal from gasoline by synthesized Ce-Y zeolite

In this research, the adsorption of a model sulfur compound, thiophene, from a simulated gasoline onto Ce-Y zeolite in pellet and powder forms was investigated. For this purpose, zeolite Na-Y was synthesized, and Ce-Y zeolite was prepared via solid-state ion-exchanged (SSIE) method. Adsorptive desulfurization of model gasoline was conducted in a batch reactor at ambient conditions to evaluate the equilibrium and kinetics of thiophene adsorption onto Ce-Y zeolite. The equilibrium data were fitted to Langmuire and Toth models. Pseudo-n-order and modified n-order models, LDF-base model, and intra-particle diffusion model were evaluated to fit the kinetic of the adsorption process and to determine the mechanism of it. The corresponding parameters and/or correlation coefficients of each model were reported. The LDF-base model was used also to fit the mass transfer coefficient for both powder and pellet forms of the adsorbent. The best fit estimates for the mass transfer coefficient were obtained 4 × 10⁻¹¹ m/s and k = 3.1 × 10⁻¹²[exp( − t/τ) + 1/(t + 10⁻⁴)], for powder and pellet form adsorbents, respectively.     

Thermodynamic and kinetic parameters of ciprofloxacin adsorption onto modified coal fly ash from aqueous solution

Batch adsorption experiments were carried out for the removal of ciprofloxacin from aqueous solution using modified coal fly ash as adsorbent. The effects of various parameters such as contact time, initial solution concentration and temperature on the adsorption system were investigated. The optimum contact time was found to be 100 min. The isotherm adsorption data fit well with the Langmuir model, and the kinetic data fit well with the pseudo-second order and the intra-particle diffusion model. Intra-particle diffusion analysis demonstrates that ciprofloxacin diffuses quickly among the particles at the beginning of the adsorption process, and then the diffusion slows down and stabilizes. Thermodynamic parameters such as ΔG, ΔH and ΔS were also calculated. The negative Gibbs free energy change and the positive enthalpy change indicated the spontaneous and endothermic nature of the adsorption, and the positive entropy change indicated that the adsorption process was aided by increased randomness.     

Adsorption behavior of a textile dye of Reactive Blue 19 from aqueous solutions onto modified bentonite

The aim of this study is to evaluate adsorption kinetics, isotherms and thermodynamic parameters of Reactive Blue 19 (RB19) onto modified bentonite from aqueous solutions. The effects of pH, contact time, initial dye concentration and temperature were investigated in the experimentally. Natural bentonite was modified by using 1,6-diamino hexane (DAH) as a modifying agent. The characterization of modified bentonite (DAH-bentonite) was accomplished by using FTIR, TGA, BET and elemental analysis techniques. The optimum pH value for the adsorption experiments was found to be 1.5 and all the experiments were carried out at this pH value. The pseudo-second-order kinetic model agrees very well with the experimental results. Equilibrium data were also fitted well to the Langmuir isotherm model in the studied concentration range of RB19 at 20 °C. The results indicate that DAH-modified bentonite is a suitable adsorbent for the adsorption of textile dyes.     

Adsorption of Zn(II) and Cd(II) ions onto magnesium and activated carbon composite in aqueous solution

Magnesium and coconuts shell activated carbon composite was prepared to selectively remove heavy metals ions in aqueous solution. Zinc(II) and cadmium(II) ions were used to clarify the adsorption capacity of the composite in comparison with no magnesium containing activated carbon. Influence of the initial heavy metal concentration, time course and solution temperature on the adsorption amounts were examined for the two adsorbents, and surface chemistry of the adsorbents was also characterized using Boehm titration. The magnesium composite adsorbed greater amount of Zn(II) and Cd(II) ions than the no magnesium counterpart. The adsorption amount of Cd(II) was not influenced with rise in solution temperature for the composite, whereas decrease in adsorption was observed for the counterpart. The loaded magnesium was estimated to be combined with carbon surface via oxygen bridge. Cadmium(II) was adsorbed onto the composite surface by ion exchange process with releasing equivalent amount of Mg(II) from the carbon surface, while Zn(II) would adsorb onto the composite by not only the ion exchange, but also the electrostatic interaction with the Cπ electrons on the graphite surface from the experimental results.     

Adsorptive removal of congo red dye from aqueous solution using bael shell carbon

This study investigates the potential use of bael shell carbon (BSC) as an adsorbent for the removal of congo red (CR) dye from aqueous solution. The effect of various operational parameters such as contact time, temperature, pH, and dye concentration were studied. The adsorption kinetics was modeled by first-order reversible kinetics, pseudo-first-order kinetics, and pseudo-second-order kinetics. The dye uptake process obeyed the pseudo-second-order kinetic expression at pH 5.7, 7 and 8 whereas the pseudo-first-order kinetic model was fitted well at pH 9. Langmuir, Freundlich and Temkin adsorption models were applied to fit adsorption equilibrium data. The best-fitted data was obtained with the Freundlich model. Thermodynamic study showed that adsorption of CR onto BSC was endothermic in nature and favorable with the positive ΔH° value of 13.613 kJ/mol.     

Effect of oxygen surface groups on adsorption of benzene derivatives from aqueous solutions onto active carbon samples

The process of adsorption of selected benzene derivatives from aqueous solution is investigated on two carbonaceous materials of differentiated surface properties - quantity of oxygen functional groups. Carbon samples were prepared by removal of external layers from granules of unmodified and oxidized active carbon. The surface and structure characteristics of carbon samples were estimated by various methods. The experimental isotherms of organics adsorption from liquid phase were measured and interpreted in terms of the theory of adsorption on heterogeneous solid surfaces. The influence of differences in adsorbate and adsorbent properties on adsorption uptake was analyzed. The adsorption effectiveness was regarded as a result of the differences in adsorbate hydrophobicities and the effect of specific interactions of its functional groups with active sites on carbon surface.     

Sonocrystallization of a novel ZIF/zeolite composite adsorbent with high chemical stability for removal of the pharmaceutical pollutant azithromycin from contaminated water

Water pollution management, reduction, and elimination are critical challenges of the current era that threaten millions of lives. By spreading the coronavirus in December 2019, the use of antibiotics, such as azithromycin increased. This drug was not metabolized, and entered the surface waters. ZIF-8/Zeolit composite was made by the sonochemical method. Furthermore, the effect of pH, the regeneration of adsorbents, kinetics, isotherms, and thermodynamics were attended. The adsorption capacity of zeolite, ZIF-8, and the composite ZIF-8/Zeolite were 22.37, 235.3, and 131 mg/g, respectively. The adsorbent reaches the equilibrium in 60 min, and at pH = 8. The adsorption process was spontaneous, endothermic associated with increased entropy. The results of the experiment were analyzed using Langmuir isotherms and pseudo-second order kinetic models with a R2 of 0.99, and successfully removing the composite by 85% in 10 cycles. It indicated that the maximum amount of drug could be removed with a small amount of composite.     

Adsorption of phenolic compounds from aqueous solutions using carbon nanoporous adsorbent coated with polymer

Phenolic compounds are a widespread class of water pollutants that are known to cause serious human health problems; and the demand for effective adsorbents for the removal of toxic compounds is increasing.In this work adsorption of phenol, resorcinol and p-cresol on mesoporous carbon material (CMK-1) and modified with polyaniline polymer (CMK-1/PANI) has been investigated in attempt to explore the possibility of using nanoporous carbon as an efficient adsorbent for pollutants. It was found that CMK-1/PANI exhibits significant adsorption for phenolic derivatives. Batch adsorption studies were carried out to study the effect of various parameters like adsorbent dose, pH, initial concentration and contact time. From the sorption studies it was observed that the uptake of resorcinol was higher than other phenolic derivatives. Freundlich and Langmuir adsorption isotherms were used to model the equilibrium adsorption data for phenolic compounds.     

Surface heterogeneity effects of activated carbons on the kinetics of paracetamol removal from aqueous solution

The removal of a compound with therapeutic activity (paracetamol) from aqueous solutions using chemically modified activated carbons has been investigated. The chemical nature of the activated carbon material was modified by wet oxidation, so as to study the effect of the carbon surface chemistry and composition on the removal of paracetamol. The surface heterogeneity of the carbon created upon oxidation was found to be a determinant in the adsorption capability of the modified adsorbents, as well as in the rate of paracetamol removal. The experimental kinetic data were fitted to the pseudo-second order and intraparticle diffusion models. The parameters obtained were linked to the textural and chemical features of the activated carbons. After oxidation the wettability of the carbon is enhanced, which favors the transfer of paracetamol molecules to the carbon pores (smaller boundary layer thickness). At the same time the overall adsorption rate and removal efficiency are reduced in the oxidized carbon due to the competitive effect of water molecules.     

Kinetics and thermodynamics of Pb(II) adsorption onto modified spent grain from aqueous solutions

Spent grain, a main by-product of the brewing industry, is available in large quantities, but its main application has been limited to animal feeding. Nevertheless, in this study, spent grain modified with 1 M NaCl solution as a novel adsorbent has been used for the adsorption of Pb(II) in aqueous solutions. Isotherms, kinetics and thermodynamics of Pb(II) adsorption onto modified spent grain were studied. The equilibrium data were well fitted with Langmuir, Freundlich and Dubinin-Radushkevick (D-R) isotherm models. The kinetics of Pb(II) adsorption followed pseudo-second-order model, using the rate constants of pseudo-second-order model, the activation energy (E_a) of Pb(II) adsorption was determined as 12.33 kJ mol⁻¹ according to the Arrhenius equation. Various thermodynamic parameters such as ΔG^ads, ΔH^ads and ΔS^ads were also calculated. Thermodynamic results indicate that Pb(II) adsorption onto modified spent grain is a spontaneous and endothermic process. Therefore, it can be concluded that modified spent grain as a new effective adsorbent has potential for Pb(II) removal from aqueous solutions.     

磁性碳纳米管吸附去除水中甲基橙的研究

采用高温催化裂解法制备碳纳米管,对其用浓硝酸氧化法进行纯化处理,并用化学共沉淀方法制备了磁性碳纳米管(简称磁性管)。利用场发射扫描电子显微镜对磁性管进行了表征。将磁分离技术应用于碳纳米管吸附性能研究,探索碳纳米管负载磁性颗粒后对甲基橙的吸附性能,寻找最佳实验条件,对吸附质溶液进行紫外-可见吸收光谱分析。同时,进行了磁性管的脱附和再吸附性能研究。     

Adsorption and solid phase extraction of 8-hydroxyquinoline from aqueous solutions by using natural bentonite

The nitrogen-heterocyclic compound 8-hydroxyquinoline (8HQ) is one of the components of coal tar and has a wide variety of uses in industry. Because of its toxicity for aquatic organisms and harmful effects for human health, the removal of 8HQ from aqueous solutions by adsorption onto natural bentonite was investigated in the present work. The experimental results show that the optimum pH value of 2.5 is favourable for the 8HQ adsorption. The experimental data were fitted well with the pseudo-second-order kinetic and Langmuir adsorption isotherm models at all studied temperatures. The maximum adsorption capacity obtained from the Langmuir isotherm model at 20 °C was 120.6 mg g⁻¹. The calculated thermodynamic results such as ΔG° (−24.3 kJ mol⁻¹) and ΔH° (−9.56 kJ mol⁻¹) indicate that the adsorption process is spontaneous and exothermic in nature. Solid phase extraction of 8HQ was also performed. The X-ray diffractometry (XRD), Fourier Transform Infrared (FTIR) and thermogravimetric (TG) analyses were carried out in order to confirm the 8HQ adsorption onto bentonite. According to the obtained results, natural bentonite can be a reusable and effective adsorbent for the removal of 8HQ.     

Removal of organic contaminants from aqueous solution by cattle manure compost (CMC) derived activated carbons

The activated carbons (ACs) prepared from cattle manure compost (CMC) with various pore structure and surface chemistry were used to remove phenol and methylene blue (MB) from aqueous solutions. The adsorption equilibrium and kinetics of two organic contaminants onto the ACs were investigated and the schematic models for the adsorptive processes were proposed. The result shows that the removal of functional groups from ACs surface leads to decreasing both rate constants for phenol and MB adsorption. It also causes the decrement of MB adsorption capacity. However, the decrease of surface functional groups was found to result in the increase of phenol adsorption capacity. In our schematic model for adsorptive processes, the presence of acidic functional groups on the surface of carbon is assumed to act as channels for diffusion of adsorbate molecules onto small pores, therefore, promotes the adsorption rate of both phenol and MB. In phenol solution, water molecules firstly adsorb on surface oxygen groups by H-bonding and subsequently form water clusters, which cause partial blockage of the micropores, deduce electrons from the π-electron system of the carbon basal planes, hence, impede or prevent phenol adsorption. On the contrary, in MB solution, the oxygen groups prefer to combine with MB⁺ cations than water molecules, which lead to the increase of MB adsorption capacity.     

Adsorptive removal and kinetics of methylene blue from aqueous solution using NiO/MCM-41 composite

Highly ordered mesoporous material MCM-41 was synthesized from tetraethylorthosilicate (TEOS) as Si source and cetyltrimethylammonium bromide (CTAB) as template. Well-dispersed NiO nanoparticles were introduced into the highly ordered mesoporous MCM-41 by chemical precipitation method to prepare the highly ordered mesoporous NiO/MCM-41 composite. X-ray diffraction (XRD) analysis, transmission electron microscopy (TEM) and high-resolution TEM (HRTEM), and nitrogen adsorption–desorption measurement were used to examine the morphology and the microstructure of the obtained composite. The morphological study clearly revealed that the synthesized NiO/MCM-41 composite has a highly ordered mesoporous structure with a specific surface area of 435.9 m² g⁻¹. A possible formation mechanism is preliminary proposed for the formation of the nanostructure. The adsorption performance of NiO/MCM-41 composite as an adsorbent was further demonstrated in the removal azo dyes of methyl orange (MO), Congo red (CR), methylene blue (MB) and rhodaming B (RB) under visible light irradiation and dark, respectively. The kinetics and mechanism of removal methylene blue were studied. The results show that NiO/MCM-41 composite has a good removal capacity for organic pollutant MB from the wastewater under the room temperature. Compared with MCM-41 and NiO nanoparticles, 54.2% and 100% higher removal rate were obtained by the NiO/MCM-41 composite.     

Optimization of nickel adsorption from aqueous solution by using activated carbon prepared from waste apricot by chemical activation

Waste apricot supplied by Malatya apricot plant (Turkey) was activated by using chemical activation method and K₂CO₃ was chosen for this purpose. Activation temperature was varied over the temperature range of 400-900 °C and N₂ atmosphere was used with 10 °C/min heat rate. The maximum surface area (1214 m²/g) and micropore volume (0.355 cm³/g) were obtained at 900 °C, but activated carbon was predominantly microporous at 700 °C. The resulting activated carbons were used for removal of Ni(II) ions from aqueous solution and adsorption properties have been investigated under various conditions such as pH, activation temperature, adsorbent dosage and nickel concentration. Adsorption parameters were determined by using Langmuir model. Optimal condition was determined as; pH 5, 0.7 g/10 ml adsorbent dosage, 10 mg/l Ni(II) concentration and 60 min contact time. The results indicate that the effective uptake of Ni(II) ions was obtained by activating the carbon at 900 °C.     

Heat of adsorption and density distribution in slit pores with defective walls: GCMC simulation studies and comparison with experimental data

The adsorption behavior (capacity, density distribution and packing density) and the isosteric heat versus loading in a slit pore whose walls contain defective graphene layers are investigated in this paper. The defective wall is characterized by the extent and size of the defect. Simulation results obtained with the Grand Canonical Monte Carlo method reveal complex patterns of isosteric heat, and this complex behavior is a result of the interplay between three factors: (i) the surface heterogeneity (solid-fluid interaction, sites with varying degree of affinity), (ii) fluid-fluid interaction and (iii) the overlapping of potentials exerted by the two defective walls. We illustrate this with argon adsorption in pores of various sizes, and results obtained from the simulation agree qualitatively with the experimental data at 77 K on Saran microporous S600H and micro-mesoporous S84 charcoals of Beebe et al. [R.A. Beebe, B. Millard, J. Cynarski, J. Am. Chem. Soc. 75 (1953) 839]. The S600H was found to contain pores predominantly in the neighborhood of 7 Å with 30% of defect and a defective size of 2.84 Å. This is consistent with the argument made by Beebe et al. that this sample is a microporous solid and most pores can accommodate only one layer. The other sample, S84, has larger pores than S600H, and it is found that it has a wider pore size distribution and the pore width is centered at about 12 Å.     

Nanofibrous membrane of polyacrylonitrile with efficient adsorption capacity for cadmium ions from aqueous solution: Isotherm and kinetic studies

The nanofibrous membrane of polyacrylonitrile (NMP) was successfully synthesized after NaOH and NaHCO₃ treatment aiming its functionalization using electrospinning for cadmium ion (Cd²⁺) adsorption. Field emission scanning electron microscopy (FE-SEM) revealed that small particles attached to the surface of functionalized PAN nanofibers. Equilibrium was attained after 60 min following a rapid uptake of Cd²⁺ with maximum adsorption capacity and percentage removal at an optimum solution pH of 7.0. The adsorbent dose of 0.3 g and 90 mg L⁻¹ of initial Cd²⁺ concentration yielded the maximum adsorption capacity. The pseudo-second-order kinetic model was the best fitted to the adsorption data, indicating that the chemisorption is the controlling mechanism of adsorption. The physisorption was proposed based on the calculated values of the mean free energy of adsorption from the D–R isotherm (E < 8 kJ mol⁻¹). Furthermore, three-parameter isotherm models indicated the homogeneous and heterogeneous Cd²⁺ adsorption onto NMP adsorbent.