Fabrication and characterizations of a polymer hybrid OA/MA/St-TiO2

A nano-hybrid composite of octadecyl acrylate/maleic anhydride/styrene (OA/MA/St) encapsulating nano-TiO₂ with an average particle size of 30-60 nm was fabricated based on chemical modification of nanotitania. The polymer hybrid OA/MA/St-TiO₂ and nano-TiO₂ were characterized by infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), static contact angle (CA) as well as transmission electron microscopy (TEM). FT-IR spectra and TGA results suggest that the copolymer OA/MA/St adheres on the surface of nano-TiO₂ through physical adsorption and chemical bonding. The calculated reacted OH surface density is about 0.6 OH/nm², and the modification efficiency is approximately 27.28%. In addition, when the molar ratio of OA/MA/St is 7:2:1, the hybrid shows the strongest hydrophobicity, and its static contact angle reaches as high as 146°. TEM image of the hybrid OA/MA/St-TiO₂ reveals that the modified particles have good dispersibility and compatibility with n-hexane.     

Investigations of solvents and various sulfur sources influence on the shape-controlled synthesis of CuInS2 nanocrystals

CuInS₂ (CIS) nanocrystals were successfully synthesized through a hot-injection technique employing a reaction of copper (I) acetate and indium (III) acetate with tert-dodecanethiol as a source of sulfur, and trioctylphosphine oxide and 1-dodecanethiol were used as ligands. The reaction medium was a mixture of two solvents: oleylamine and 1-octadecene. Varying the ratio between both solvents leads to the formation of wurtzite CuInS₂ particles with shapes ranging from triangular to rod-shaped with length up to 50 nm. Oleylamine turned out to influence the reaction condition in two opposite ways: by leading to monomer depletion before the injection of the sulfur precursor, and at the same time increasing the activity of the monomers remaining in solution. By changing the sulfur source from tert-dodecanethiol to sulfur dissolved in oleylamine, triangular particles with zinc blend structure and a smaller size (~5 nm) were synthesized. The final materials were characterized by powder X-ray diffraction (XRD), transmission electron microscopy (TEM), energy dispersive X-ray analysis (EDX), and absorption spectroscopy (UV?CVis).     

Synthesis and characterization of Cu doped ZnS nanoparticles using TOPO and SHMP as capping agents

Undoped and Cu²⁺ doped (0.2-0.8%) ZnS nanoparticles have been synthesized through chemical precipitation method. Tri-n-octylphosphine oxide (TOPO) and sodium hexametaphosphate (SHMP) were used as capping agents. The synthesized nanoparticles have been analyzed using X-ray diffraction (XRD), transmission electron microscope (TEM), Fourier transform infrared spectrometer (FT-IR), UV-vis spectrometer, photoluminescence (PL) and thermo gravimetric-differential scanning calorimetry (TG-DTA) analysis. The size of the particles is found to be 4-6 nm range. Photoluminescence spectra were recorded for ZnS:Cu²⁺ under the excitation wavelength of 320 nm. The prepared Cu²⁺-doped sample shows efficient PL emission in 470-525 nm region. The capped ZnS:Cu emission intensity is enhanced than the uncapped particles. The doping ions were identified by electron spin resonance (ESR) spectrometer. The phase changes were observed in different temperatures.     

Electrochemical behaviour of nano-sized spinel LiMn2O4 and LiAlxMn2−xO4 (x=Al: 0.00-0.40) synthesized via fumaric acid-assisted sol-gel synthesis for use in lithium rechargeable batteries

Pristine spinel LiMn₂O₄ and LiAl_xMn_2−xO₄ (x=Al: 0.00-0.40) with sub-micron sized particles have been synthesized using fumaric acid as chelating agent by sol-gel method. The synthesized samples were subjected to thermogravimetric analysis (TGA), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and cyclic voltammetry (CV) and galvanostatic cycling studies. The TGA curve of the gel shows several weight-loss regions stepwise amounting to 55% till 800 °C attributed to the decomposition of the precursors. Calcination to higher temperatures (800 °C) yields pure-phase spinel (LiAl_xMn_2−xO₄), as it is evident from the high-intensity XRD reflections matching to the standard pattern. SEM and TEM studies confirm that the synthesized grains are of uniform regular surface morphology. FT-IR studies show stretching and bending vibration bands of Li-O, Li-Al-Mn-O. LiAl_0.1Mn_1.90O₄ spinel was found to deliver discharge capacity of 139 mA h/g during the first cycle with columbic efficiency of 97%. LiAl_0.1Mn_1.90O₄ spinel exhibits the high cathodic peak current indicating better electrochemical performance. Low doping (x=0.1) of Al is found to be beneficial in stabilizing the spinel structure.     

Surface-induced structural modification in ZnO nanoparticles

Cobalt?Ccobalt carbide [Co _x C (x?=?2 or 3)] and cobalt (FCC-Co) microwires have been synthesized using a polyol method in the presence of a high external magnetic field of 4.3?kOe. It was reported before that the synthesis of these particles in the absence of magnetic field leads to the formation of spherical particles. Analysis of the X-ray diffraction (XRD) scans indicates that the synthesized Co _x C wires consist of four phases?? ??-Co, ??-Co, Co₃C, and Co₂C. The percent composition of these phases was 53.3?% Co₃C, 26.8?% Co₂C, 12.5?% ??-Co, and 7.4?% ??-Co. XRD analysis of the as-synthesized cobalt wires shows that it consists of single-phase FCC-Co. Based on Scherrer analysis of the XRD data, the average crystallite sizes of the cobalt carbide and the cobalt particles are 18.5 and 16.3?nm, respectively. Scanning electron microscopy (SEM) studies show that the diameter of Co _x C wires is in the range of 1.6(±0.2)???m with their length varying between 18 and 30???m while the diameter of the cobalt wires is 1.65(±0.1). The SEM results infer that the morphology of the growing particles was controlled by the magnetic field with the applied field directs the growth of the particles into wires. The magnetic measurements indicate a superparamagnetic character of the cobalt wires and a soft ferromagnetic nature of the synthesized Co _x C chains. The degree and field range of the interactions between magnetic domains have been investigated using a Henkel plot.     

Preparation of poly(styrene-glucidylmethacrylate)/Fe3O4 composite microspheres with high magnetite contents

Magnetic polymer composite microspheres with high magnetite contents were prepared by dispersion polymerization of styrene (St) and glucidylmethacrylate (GMA), in which Fe₃O₄ nanoparticles were co-stabilized by oleic acid and silane surfactants. The microstructure of the composite microspheres was characterized by Fourier transform infrared (FTIR) spectrometry, X-ray diffraction (XRD) and transmission electron microscopy (TEM). Results demonstrated the presence of a hybrid morphology with organic polymer-encapsulated inorganic particles. Subsequently, thermogravimetric analysis (TGA) and vibrating sample magnetometry (VSM) were used to evaluate the magnetite content of the microspheres. It was found that an accordant magnetite content of about 70 wt%, could be obtained for the magnetic polymer microspheres, a value significantly higher than those reported thus far. The possible mechanism for the formation of the microspheres was proposed.     

Elaboration and characterization of TiO2 nanoparticles incorporated in SiO2 host matrix

Nanometer-scale TiO₂ particles have been synthesized by sol-gel method. It was incorporated in a glass-based silica aerogel. The composite was characterized by various techniques such as particle size analysis, scanning electron microscopy (SEM), atomic force microscopy (AFM), transmission electron microscopy (TEM), X-ray diffraction (XRD), infrared spectroscopy (IR) and photoluminescence (PL). The bulk glass presents a strong luminescence at wavelengths ranging from 750 to 950 nm. This PL was attributed to various non-bridging oxygen hole centers (NBOHCs) defects resulting from thermal treatment and crystallization of TiO₂ at the interface between titania nanoparticles and silica host matrix.     

Study of cerium doped magnetite (Fe3O4:Ce)/PMMA nanocomposites

The paper presents the synthesis and properties of polymer nanocomposite material based on cerium doped magnetite (Fe₃O₄) as filler material and poly methyl methacrylate (PMMA) as host matrix. The magnetite (Fe₃O₄) particles were synthesized by co-precipitation route using stable ferrous and ferric salts with ammonium hydroxide as precipitating agent. Further, they doped by cerium oxide (CeO₂) non-stoichiometrically. The composite material was fabricated by solvent evaporation method. Here 2.4 GHz microwaves were used to study the effect of microwaves heating on polymerization. The phase and crystal structure is determined by X-ray diffraction (XRD). The average crystallite size of the composites varies from 28 to 35 nm. The chemical structure is confirmed by Fourier transform infrared (FTIR) spectroscopy. The magnetic and thermal properties are investigated by vibrating sample magnetometer (VSM) and differential scanning calorimetry (DSC). The thermal study shows that the microwave heated samples possess higher glass transition temperature (T_g). The magnetic results suggest that coercivity (H_C) and squareness (M_r/M_s) of the loop increases with increasing doping percent of cerium.     

A novel precursor for synthesis of metallic copper nanocrystals by thermal decomposition approach

[Bis(2-hydroxy-1-naphthaldehydato)copper(II)] complex, as a novel precursor, was employed in thermal decomposition process to synthesize metallic copper nanoparticles using oleylamine (C₁₈H₃₇N) as capping agent. The products were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared (FT-IR) spectroscopy, thermogravimetric analysis (TGA), X-ray photoelectron spectroscopy (XPS) and ultraviolet-visible (UV-vis) spectroscopy. The synthesized copper nanoparticles have a fcc structure with average size 20-35 nm.     

Dye doped Eosin yellowish silica nanoparticles as novel fluorophore for a peroxyoxalate chemiluminescence system

In this work, we report the preparation and characterization of novel dye doped fluorophore Eosin yellowish silica nanoparticles (ESNPs). We synthesized ESNPs by the St?ber method via encapsulation of Eosin Yellowish in silica particles by the condensation of tetraethyl orthosilicate under alkaline condition at room temperature. The resulted ESNPs were characterized by transmission electron microscopy, atomic force microscopy; UV–Visible, fluorescence and Fourier transform infrared spectroscopy. The sizes of the nanoparticles have been found to be 300.0 (±1.0), 400.0 (±1.1) and 500.0 (±5.2) nm depending the reaction conditions under which they were synthesized. Furthermore, because of intense light emission, the ESNPs were used as fluorophore in a peroxyoxalate chemiluminescence system. The effect of solvent and concentrations of necessary reagents, bis(2,4,6-trichlorophenyl)oxalate, sodium salicylate, hydrogen peroxide and the effects of size of the ESNP and temperature on the luminescence efficiency of the system were examined. The activation kinetic parameters of the system were also evaluated from the temperature investigation.     

Deposition of silver nanoparticles on carbon nanotube by chemical reduction method: Evaluation of surface,thermal and optical properties

Silver was stabilized on multi-walled carbon nanotubes (MWCNTs) by chemical-reduction technique using N,N-dimethylformamide (DMF) as a reducing agent. The influence of silver on the performance of carbon nanotubes (CNTs) was investigated by employing Fourier-transform infrared spectra (FTIR), Raman spectroscopy (RAS), thermal gravimetric analysis (TGA), zeta potential measurement, scanning electron microscope (SEM), electron dispersive X-ray spectrometer (EDX), transmission electron microscopy (TEM), and reflectance spectroscopy (RS). FTIR as well as RS methods evidenced the synthesis procedure using chemical reduction method was successful. Performing TGA of the samples under oxygen atmosphere demonstrated that the silver nanoparticles (Ag NPs) generated on MWCNTs surface can decrease the thermal stability of the particles by the catalytic oxidation of CNTs. In contrary, the thermal stability of the MWCNTs has improved under nitrogen atmosphere. EDX results showed the presence of Ag, Au and Co on the surface of deposited sample. The synthesised silver multi-walled carbon nanotubes (Ag–MWCNTs) were found to have higher UV reflection activity compared with untreated particles. The Ag–CNTs can be used in producing anti-UV composites.     

Synthesis of Fe2O3 concentrations and sintering temperature on FTIR and magnetic susceptibility measured from 4 to 300 K of monolith silica gel prepared by sol–gel technique

Nano-crystalline ferric oxide was synthesized inside an amorphous silica matrix by the sol–gel method. The formation of ferric oxide can be detected, giving fine particles around 5–10 nm crystallite sizes calculated from win-fit program. This is associated with a specific role of the silica matrix, which facilitates the diffusion of the reacting cations, enhancing the ferric oxide formation. γ- to α- and/or ε-Fe₂O₃ transformations take place by increasing the Fe₂O₃ concentration for samples sintering at constant-heat treatment temperature. The dried monolith gel materials were characterized by X-ray diffraction (XRD), Fourier transform infrared (FTIR), as well as by scanning electron microscopy (SEM). The magnetic susceptibility at zero-field cooling (M_ZFC) of the prepared samples was evaluated using superconducting quantum interference device (SQUID) magnetometer in temperature range from 4 to 300 K at 1 T.     

Fabrication and characterization of thermo-sensitive magnetic polymer composite nanoparticles

Novel dual-functional nanospheres composed of Fe₃O₄ nanoparticles embedded in a thermo-sensitive polymer were synthesized by emulsifier-free emulsion polymerization. The Fe₃O₄ nanoparticles were prepared by chemical precipitation. The surface of these particles was modified by oleic acid to achieve stability against agglomeration. These stable particles were then polymerized using N-isopropylacrylamide as the main monomer, divinylbenzene as the crosslinker and potassium persulfate as the initiator. The nanospheres were characterized by Fourier-transform infrared spectrum, transmission electron microscopy, thermogravimetric analysis, vibrating sample magnetometer and dynamic light scattering. The results show that the lower critical solution temperature of thermo-sensitive magnetic immunomicrospheres was between 40 and 45 °C.     

Polystyrene/magnesium hydroxide nanocomposite particles prepared by surface-initiated in-situ polymerization

In order to avoid their agglomeration and incompatibility with hydrophobic polystyrene substrate, magnesium hydroxide nanoparticles were encapsulated by surface-initiated in-situ polymerization of styrene. The process contained two steps: electrostatic adsorption of initiator and polymerization of monomer on the surface of magnesium hydroxide. It was found that high adsorption ratio in the electrostatic adsorption of initiator could be attained only in acidic region, and the adsorption belonged to typical physical process. Compared to traditional in-situ polymerization, higher grafting ratio was obtained in surface-initiated in-situ polymerization, which can be attributed to weaker steric hindrance. Both Fourier transform infrared spectroscopy (FTIR) and transmission electron microscopy (TEM) indicated that polystyrene/magnesium hydroxide nanocomposite particles had been successfully prepared by surface-initiated in-situ polymerization. The resulting samples were also analyzed and characterized by means of contact angle testing, dispersibility evaluation and thermogravimetric analysis.     

Study on the synthesis of ε-Fe3N-based magnetic fluid

In this work, stable high-saturation magnetization ε-Fe₃N magnetic fluid was synthesized successfully by the chemical reaction of iron carbonyl (Fe(CO)₅) and ammonia gas (NH₃). The experiment results have shown that the reactive conditions, such as the nitriding temperature, the gas flux ratio of Ar1:Ar2:NH₃, the reactive time, the content of surfactant and the hole size of the porous plate used, have important effects on the phase composition, the size of magnetic particles, the magnetic properties and the stability of ε-Fe₃N magnetic fluid. Also it was found that the synthetic time of stable high saturation magnetization ε-Fe₃N magnetic fluid could be shortened by adding n-heptane into the carrier, and the size of ε-Fe₃N magnetic particles could be decreased by decreasing the pore size of the porous plate used in our experiment. Finally, stable ε-Fe₃N magnetic fluid with the saturation magnetization 1663 Gs and the mean particle size 12 nm was synthesized successfully.     

Characterization, sintering and dielectric properties of nanocrystalline zinc oxide prepared by a citric acid-based combustion route

Nanosized zinc oxide has been synthesized through a novel single step solution combustion route using citric acid as fuel. The X-ray diffraction (XRD) analysis revealed that the synthesized ZnO nanopowder has the pure wurtzite structure. The phase purity of the nanopowder has been confirmed using differential thermal analysis (DTA), thermogravimetric analysis (TGA) and Fourier transform infrared spectroscopy (FT-IR). The morphology and crystalline size of the as-prepared nanopowder characterized by scanning electron microscopy (SEM) and transmission electron microscopy (TEM) revealed that the powder consisted of a mixture of nanoparticles and nanorods. The nanocrystalline ZnO could be sintered to ∼97% of the theoretical density at 1200 °C in 4 h. The dielectric constant (ε_r) and dielectric loss (ε_i) of sintered ZnO pellets at 5 MHz were 1.38 and 9×10⁻², respectively, at room temperature.     

Direct synthesis and characterization of phenyl-functionalized SBA-15

Phenyl-functionalized SBA-15 materials (Ph-SBA-15) were directly synthesized by using tri-block copolymer Pluronic P123 as templating agent under acidic conditions. The samples were characterized by Fourier transform infrared (FT-IR) spectra, X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), thermogravimetry analysis (TGA) and N₂ adsorption-desorption. The results show that the phenyl groups are covalently attached to the pore wall of SBA-15 after modification. The functionalized materials still preserve a desirable two-dimensional P6mm hexagonal structure and have large specific surface area and pore volume although the molar ratio of phenyltrimethoxysilane in total silica precursors is as high as 23.0%.     

Synthesis and properties of Sn<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>Fe<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>O<Subscript>2</Subscript> nanoparticles obtained by a proteic sol–gel method

Iron-doped SnO₂ nanoparticles with chemical formula Sn_1?xFe_xO_2?y (x =?0.02, 0.05 and 0.10 at%) were successfully produced by a proteic sol–gel method. Thermogravimetric analysis and differential scanning calorimetry were performed to investigate the thermal behavior of the precursor powders as well as to select the appropriate calcination temperatures for oxide formation. X-ray absorption near-edge spectroscopy studies were carried out to determine the valence state of the transition metal used as dopant. Structural, morphological, and optical properties of the synthesized materials were studied by X-ray diffraction, Mössbauer spectroscopy, transmission electron microscopy, Fourier-transform infrared spectroscopy, and ultraviolet-visible spectroscopy. The results confirmed the formation of nanometric spherical particles of single-phased SnO₂ with rutile-type tetragonal structure. Iron doping was accomplished in the form of Fe³⁺ substituting for Sn⁴⁺ in the SnO₂ matrix, with the creation of oxygen vacancies to achieve charge balance. Band gaps of SnO₂ were found to be unaffected by the introduction of iron.     

Preparation of Halloysite Nanotubes/Polystyrene (HNTs/PS) Core‐shell Particles via Soap‐less Microemulsion Polymerization

Halloysite nanotubes/polystyrene (HNTs/PS) inorganic/organic core‐shell particles were prepared via a convenient soap‐less microemulsion polymerization. The inorganic cores were pre‐treated with allyl alcohol (AA) and the polymer shells were prepared successfully by the facile soap‐less microemulsion polymerization of styrene (St) with the allyl alcohol‐modified halloysite nanotube (AA‐HNT) nanoparticles as seeds, and potassium persulfate (KPS) as initiator in water. The products were characterized by Fourier transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA). The morphologies of the HNTs/PS core‐shell particles were characterized by transmission electron microscopy (TEM). The mechanism of the nucleation is also mentioned.     

Core–corona PSt/P(BA–AA) composite particles by two-stage emulsion polymerization

Raspberry-shaped composite particles with polystyrene (PSt) as core and poly(n-butyl acrylate-co-acrylic acid) (P(BA–AA)) as corona were synthesized via emulsion polymerization. The random copolymer, P(BA–AA), was pre-prepared and used as a polymeric surfactant, its emulsifying properties adjusted by changing the mass ratio of BA and AA. The morphology of the resulting core–corona composite particles, P(St/P(BA–AA)), could be regulated and controlled by varying the concentrations of P(BA–AA) or the mass ratio of BA:AA in P(BA–AA). The experimental results indicate that 3.0–6.0 wt% of P(BA–AA) is required to obtain stable composite emulsions, and P(BA–AA) with a mass ratio of BA:AA = 1:2 is able to generate distinct core–corona structures. A mechanism of composite particle formation is proposed based on the high affinity between the PSt core and the hydrophobic segments of P(BA–A). The regular morphology of the colloidal film is expected to facilitate potential application of core–corona particles in the field of light scattering. Furthermore, the diversity of core–corona particles can be expanded by replacing P(BA–AA) corona particles with other amphiphilic particles.