Preparation and characterization of PES/TiO2 composite membranes

Polyethersulfone (PES)/TiO₂ composite membranes were prepared by phase inversion method with nano-TiO₂ as additive. The influence of TiO₂ on the morphologies and the performances of PES/TiO₂ membranes were investigated through the methods of SEM, XRD, TGA, contact angle goniometer, mechanical strength tests and filtration experiments. The results showed that the structure of membrane was not obviously affected by addition of TiO₂, and the performances such as hydrophilicity, thermal stability, mechanical strength and anti-fouling ability of membrane were enhanced through adding TiO₂ nanoparticles. At 0.5 wt.% TiO₂ content, the composite membrane has an excellent performance, however higher TiO₂ content (than 0.5 wt.%) resulted in defective pore structure of the membranes and decline of the performances, such as permeability and mechanical strength. TGA and mechanical strength analyses indicated good compatibility between polymers and TiO₂ nanoparticles.     

Effect of TiO2 nanoparticles on the surface morphology and performance of microporous PES membrane

PES-TiO₂ composite membranes were prepared via phase inversion by dispersing TiO₂ nanopaticles in PES casting solutions. The crystal structure, thermal stability, morphology, hydrophilicity, permeation performance, and mechanical properties of the composite membranes were characterized in detail. XRD, DSC and TGA results showed that the interaction existed between TiO₂ nanopaticles and PES and the thermal stability of the composite membrane had been improved by the addition of TiO₂ nanopaticles. As shown in the SEM images, the composite membrane had a top surface with high porosity at low loading amount of TiO₂, which was caused by the mass transfer acceleration in exposure time due to the addition of TiO₂ nanopaticles. At high loading amount of TiO₂, the skinlayer became much looser for a significant aggregation of TiO₂ nanopaticles, which could be observed in the composite membranes. EDX analysis also revealed that the nanoparticles distributed in membrane more uniformly at low loading amount. Dynamic contact angles indicated that the hydrophilicity of the composite membranes was enhanced by the addition of TiO₂ nanopaticles. The permeation properties of the composite membranes were significantly superior to the pure PES membrane and the mean pore size also increased with the addition amount of TiO₂ nanopaticles increased. When the TiO₂ content was 4%, the flux reached the maximum at 3711 L m⁻² h⁻¹, about 29.3% higher than that of the pure PES membrane. Mechanical test also revealed that the mechanical strength of composite membranes enhanced as the addition of TiO₂ nanopaticles.     

Effect of TiO2 nanoparticle size on the performance of PVDF membrane

The comparison of the performance and morphology was carried out between neat PVDF membrane and PVDF composite membranes with nanosized TiO₂ particles of different size. The results of permeability and instrumental analysis illustrated that nanometer size obviously affected the performance and structure of the PVDF membranes. The smaller nanoparticles could improve the antifouling property of the PVDF membrane more remarkably. The surface and cross-section of the membranes were observed with an atomic force microscopy (AFM), a scanning electron microscope (SEM). The TiO₂/PVDF membrane with smaller nanoparticles had smaller mean pore size on its surface and more apertures inside the membrane. X-ray diffraction (XRD) experiments also suggested that smaller TiO₂ nanoparticles had stronger effect on the crystallization of PVDF molecules.     

Ag/TiO2 sol prepared by a sol–gel method and its photocatalytic activity

Ag/TiO₂ sol with narrow particle size distribution was synthesized using TiCl₄ as the starting material. TiCl₄ was converted to Ti(OH)₄ gel. The Ag/TiO₂ sol was prepared by a process where H₂O₂ was added and then heated at 90–97 °C. After condensation reaction and crystallization, a transparent sol with suspended Ag/TiO₂ was formed. Ag/TiO₂ was characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, contact angle analysis, and X-ray photoelectron spectroscopy. The photocatalytic properties of Ag/TiO₂ film were evaluated by degradation of methylene blue in aqueous solution under UV light irradiation. The suspended Ag/TiO₂ particles were rhombus primary particles with the major axis ca. 40 nm and the minor axis ca. 10 nm. Ag nanoparticles were well dispersed on TiO₂ and the particle size was only 1–2 nm. Ag could restrain the recombination of photo-generated electrons and holes effectively. Transparent thin films could be obtained through dip-coating glass substrate in the sol. The thin film had strong hydrophilicity after being illuminated by UV light. Ag/TiO₂ film showed a significant increase in photocatalytic activity compared to the TiO₂ film. The high amount of surface hydroxyls on Ag/TiO₂ film also played an important role in its photocatalytic activity.     

Comparison of self-cleaning properties of three titania coatings on float glass

This work compares the self-cleaning properties of experimental TiO₂ and TiO₂-Ag coatings on float glass with a commercial self-cleaning glass. In the experimental surfaces, TiO₂ coating was applied to float glass via the sol-gel route, while TiO₂-Ag coating was applied by the liquid flame spray method, which deposits TiO₂-Ag composite nanoparticles on the surface. The effect of the coatings on the surface wettability and the activation time for achieving hydrophilicity was studied through water contact angle as a function of exposure time to UV light. The surface morphology was investigated by using scanning electron microscopy (SEM) and confocal optical microscopy. The photocatalytic activity of the coatings was examined with methylene blue and stearic acid degradation tests. Finally, the soil attachment to the surfaces was tested with a sebum-based model soil. The sol-gel TiO₂ coating became superhydrophilic within a few hours, while the activation time needed for the commercial titania coated glass was several days. The surface with the TiO₂-Ag nanoparticles did not show any marked changes in the water contact angle. The commercial titania coated and the sol-gel TiO₂ surfaces showed self-cleaning properties and clearly lower attachment of soil than the uncoated and TiO₂-Ag coated surfaces. The difference in the interaction of the surfaces with the organic contaminants was assumed to depend mainly on differences in the thickness of the coatings.     

Plasma surface modification of nanofiltration (NF) thin-film composite (TFC) membranes to improve anti organic fouling

Commercial nanofiltration (NF) thin-film composite (TFC) membranes were treated by low-pressure NH₃ plasma, and the effects of the plasma treatment were investigated in terms of the membrane hydrophilicity, pure water flux, salt rejection, protein adsorption, and humic acid fouling. Experimental results indicated that the membrane surface hydrophilicity was increased by the plasma treatment, and changes in the hydrophilicity as well as membrane performance including permeate flux and fouling varied with the original membrane characteristics (e.g., roughness and hydrophilicity). Water flux of plasma treated membranes was the highest with 10 min and 90 W of plasma treatment, and salt rejection was mainly affected by the intensity of the plasma power. Results of bovine serum albumin (BSA) adsorption demonstrated that the protein adsorption decreased with increasing plasma treatment time. The plasma treatment that resulted in more negatively charged surfaces could also better prevent Aldrich humic acid (AHA) attachment on the membrane surface.     

Fabrication of Fe-doped TiO2 nanoparticles and investigation of photocatalytic decolorization of reactive red 198 under visible light irradiation

In this research, Fe-doped TiO₂ nanoparticles with various Fe concentrations (0. 0.1, 1, 5 and 10 wt%) were prepared by a sol–gel method. Then, nanoparticles were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), energy-dispersive X-ray analysis (EDX), BET surface area, photoluminescence (PL) spectroscopy and UV–vis diffuse reflectance spectroscopy (DRS). The photocatalytic activity of the nano-particles was evaluated through degradation of reactive red 198 (RR 198) under UV and visible light irradiations. XRD results revealed that all samples contained only anatase phase. DRS showed that the Fe doping in the titania induced a significant red shift of the absorption edge and then the band gap energy decreased from 3 to 2.1 eV. Photocatalytic results indicated that TiO₂ had a highest photocatalytic decolorization of the RR 198 under UV irradiation whereas photocatalytic decolorization of the RR 198 under visible irradiation increased in the presence of Fe-doped TiO₂ nanoparticles. Among the samples, Fe-1 wt% doped TiO₂ nanoparticles showed the highest photocatalytic decolorization of RR198 under visible light irradiation.     

In situ Radical Copolymerization in Presence of Surface‐Modified TiO2 Nanoparticles: Influence of a Double Modification on Properties of Unsaturated Polyester (UP) Nanocomposites

In the preparation of nanocomposites, there is competition between the dispersion of nanoparticles and the formation of agglomerates. In this study, radical copolymerization of ethyl acrylate and methyl methacrylate initiated by 2,2‐azobis (isobutyro) nitrile (AIBN) was performed, in the presence of titanium oxide (TiO₂) nanoparticles modified in a new approach; a good dispersion of the nanoparticles in the unsaturated polyester (UP) matrix was obtained. The TiO₂ nanoparticles were exposed to 3‐(methacryloxy) propyl trimethoxy silane as the coupling agent. The presence of coupling agent‐grafted TiO₂ nanoparticles in the copolymerization process resulted in the formation of a polymeric layer on the surface of the TiO₂ nanoparticles (doubly modified‐TiO₂). The grafting of coupling agent molecules and consequently copolymer macromolecular chains onto the surface of TiO₂ nanoparticles was investigated using Fourier transform infrared (FTIR) analysis. It found that the formation of an acrylate layer on the surface of nanoparticles was successful. Then, unsaturated polyester (UP)/TiO₂ nanocomposites were prepared. The morphology was studied using transmission electron microscopy (TEM). Mechanical properties and ultraviolet visible (UV/VIS) spectroscopy of various samples, including the doubly modified‐TiO₂ nanoparticles, with different nanoparticle inclusions and the unmodified‐TiO₂ nanoparticles, were also investigated. The results showed the doubly modified‐TiO₂ nanoparticles, compared to those of unmodified‐TiO₂, had better nanoparticle dispersion causing improvement in the mechanical properties and UV shielding.     

Investigation on a novel ZnO/TiO2–B photocatalyst with enhanced visible photocatalytic activity

A new type of composite photocatalysts (ZnO/TiO₂–B) with Zinc oxide nanoparticles dispersed on boron doped titanium dioxide was prepared via a sol–gel method. The as-prepared powders were characterized by HRTEM, XRD, XPS, UV–vis DRS, and PL techniques. The results reveal that B³⁺ ions are doped into the TiO₂ lattice in interstitial mode, while ZnO nanoparticles are dispersed on the surface of TiO₂. The absorption of photocatalysts was extended into visible light region and the photogenerated electrons and holes were separated efficiently. Hence, ZnO/TiO₂–B composite photocatalyst exhibits much better photocatalytic activity than those of pure TiO₂ and TiO₂–B on photodegradation of 4-chlorophenol under visible light irradiation.     

Photoelectrocatalytic degradation of organic contaminants at Bi2O3/TiO2 nanotube array electrode

In the current work, TiO₂ nanotube array was prepared via electrochemical anode method. Then the Bi₂O₃ nanoparticles were deposited onto the TiO₂ nanotube array via dip-coating method from an amorphous complex precursor. The crystal structures were characterized via X-ray diffraction analysis. Their surface textures were observed via electron-scanning microscope. The prepared composite array electrode exhibited high photoelectrocatalytic activities towards degrading organic contaminants under visible light irradiation. High photoelectrocatalytic activities were also exhibited under UV light irradiation. The catalytic mechanism was discussed based on the analysis of electrochemical and degradation kinetics results. It is suggested a P (Bi₂O₃)-N (TiO₂) junction was formed to increase the catalytic activates. The stability of the electrode materials was confirmed finally.     

Surface modification of PMMA/O-MMT composite microfibers by TiO2 coating

In the present work, poly(methyl methacrylate) (PMMA)/organically modified montmorillonite (O-MMT) composite microfibers were firstly prepared by emulsion polymerization combined with electrospinning, and then coated by nanosize titanium dioxide (TiO₂) using RF magnetron sputter technique. The modified surfaces of PMMA/O-MMT composite microfibers were characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscope (SEM), transmission electron microscope (TEM), X-ray diffraction (XRD), UV-vis spectroscopy and drop shape analyzer. Finally, the photocatalytic properties of TiO₂ coated PMMA/O-MMT composite microfiber membranes were evaluated by degradation of methylene blue(MB) under UV illumination. The experimental results revealed that anatase-TiO₂ and rutile-TiO₂ nanoparticles were well spread and physically deposited on the surface of PMMA/O-MMT microfibers, and the wettability of the PMMA/O-MMT composite microfibers was improved after surface modification by sputter coating. Furthermore, the PMMA/O-MMT microfibers membrane coated with TiO₂ performed well in photocatalytic degradation of MB.     

Hydrophilic modification of polyethersulfone porous membranes via a thermal-induced surface crosslinking approach

A thermal-induced surface crosslinking process was employed to perform a hydrophilic surface modification of PES porous membranes. Difunctional poly(ethylene glycol) diacrylate (PEGDA) was used as the main crosslinking modifier. The addition of trifunctional trimethylolpropane trimethylacrylate (TMPTMA) into the reaction solutions accelerated the crosslinking progress of PEGDA on PES membranes. The membrane surface morphology and chemical composition were characterized by scanning electron microscopy (SEM) and FTIR-ATR spectroscopy. The mass gains (MG) of the modified membranes could be conveniently modulated by varying the PEGDA concentration and crosslinking time. The measurements of water contact angle showed that the hydrophilicity of PES membranes was remarkably enhanced by the coating of crosslinked PEGDA layer. When a moderate mass gain of about 150 μg/cm² was reached, both the permeability and anti-fouling ability of PES membranes could be significantly improved. Excessive mass gain not only contributed little to the anti-fouling ability, but also brought a deteriorated permeability to PES membranes.     

The effect of the deposition parameters on size, distribution and antimicrobial properties of photoinduced silver nanoparticles on titania coatings

Controlled photodeposition of silver nanoparticles (AgNP) on titania coatings using two different sources of UV light is described. Titania (anatase) thin films were prepared by the sol-gel dip-coating method on silicon wafers. AgNPs were grown on the titania surface as a result of UV illumination of titania films immersed in aqueous solutions of silver nitrate. UV xenon lamp or excimer laser, both operating at the wavelength 351 ± 5 nm, was used as illumination sources. The AFM topography of AgNP/TiO₂ nanocomposites revealed that silver nanoparticles could be synthesized by both sources of illumination, however the photocatalysis carried out by UV light from xenon lamp illumination leads to larger AgNP than those synthesized using the laser beam. It was found that the increasing concentration of silver ions in the initial solution increases the number of Ag nanoparticles on the titania surface, while longer time of irradiation results the growth of larger size nanoparticles. Antibacterial tests performed on TiO₂ covered by Ag nanoparticles revealed that increasing density of nanoparticles enhances the inhibition of bacterial growth. It was also found that antibacterial activity drops by only 10-15% after 6 cycles compared to the initial use.     

Novel nanocomposite membranes based on polybenzimidazole and Fe<Subscript>2</Subscript>TiO<Subscript>5</Subscript> nanoparticles for proton exchange membrane fuel cells

In this work, Fe₂TiO₅ nanoparticles were used for improving the proton conductivity, and water and acid uptake of polybenzimidazole (PBI)-based proton exchange membranes. The nanocomposite membranes have been prepared using different amounts of Fe₂TiO₅ nanoparticles and dispersed into a PBI membrane with the solution-casting method. The prepared membranes were then physico-chemically and electrochemically characterized for use as electrolytes in high-temperature PEMFCs. The PBI/Fe₂TiO₅ membranes (PFT) showed a higher acid uptake and proton conductivity compared with the pure PBI membranes. The highest acid uptake (156 %) and proton conductivity (78 mS/cm at 180 °C) were observed for the PBI nanocomposite membranes containing 4 wt% of Fe₂TiO₅ nanoparticles (PFT₄). The PFT₄ composite membrane showed 380 mW/cm² power density and 760 mA/cm² current density in 0.5 V at 180 °C at dry condition. The above results indicated that the PFT₄ nanocomposite membranes could be utilized as proton exchange membranes for high-temperature fuel cells.     

Preparation and Characterization of Poly(Methyl Methacrylate) Coated TiO2 Nanoparticles

Titanium dioxide (TiO₂) nanoparticles were modified with poly(methyl methacrylate) (PMMA) to improve the dispersion stability of the nanoparticles in a dielectric medium and to reduce the density mismatch between TiO₂ and a dielectric medium for a microcapsule‐type electrophoretic display application. Nanoparticles were coated with PMMA by in situ dispersion polymerization. The PMMA‐coated TiO₂ nanoparticles were characterized by fourier transform‐infrared spectrometrey (FT‐IR), electrophoretic light scattering (ELS), and scanning electron microscopy (SEM). Density of PMMA‐coated TiO₂ nanoparticles was found to be dependent on the thickness of the PMMA coating on the nanoparticles. An increase of thermal stability of the PMMA layer and the contents of PMMA on the surface of the nanoparticles were measured via thermogravimetric analysis (TGA).     

Hydrothermal synthesis of well-dispersed ultrafine N-doped TiO2 nanoparticles with enhanced photocatalytic activity under visible light

Ultrafine nitrogen-doped TiO₂ nanoparticles with narrow particle size distribution, good dispersion, and high surface area were synthesized in the presence of urea and PEG-4000 via a hydrothermal procedure. TEM observation, N₂ adsorption, XRD, UV-vis spectroscopy, the Raman spectroscopy and XPS analysis were conducted to characterize the synthesized TiO₂ particles. The synthesized TiO₂ particles were a mixture of 49.5% anatase and 50.5% rutile with a size of around 5 nm. The photocatalytic activities were tested in the degradation of an aqueous solution of a reactive Brilliant Blue KN-R under both UV and visible light. The synthesized TiO₂ particles showed much higher photocatalytic activity than a commercial P25 TiO₂ powder under both UV and visible light irradiations. The high performance is associated to N doping, the reduced particle size, good dispersion, high surface area, and a quantum size effect.     

Photocatalytic degradation of azo dyes using Zn-doped and undoped TiO2 nanoparticles

Undoped and Zn-doped TiO₂ nanoparticles were synthesized by the sol gel method. The dopant (Zn) was taken at 0.1, 0.2, 0.5, 0.7, and 1.0 mol%. The initial precursors were titanium tetraisopropoxide and zinc acetate. The samples were characterized by X-ray powder diffraction, Fourier transform infrared spectroscopy, transmission electron microscopy, and UV–vis diffuse reflectance. The photocatalytic activity of the prepared nanoparticles was studied by observing their role in degradation of two azo dyes, i.e., Eriochrome Black T and Methyl Red under UV–visible light. The results revealed that Zn-doped TiO₂ nanoparticles exhibited better degradation as compared to undoped TiO₂ nanoparticles. In this study, 0.7 mol% Zn-doped TiO₂ showed highest photocatalytic activity. Doping of Zn allowed better separation of electron–hole pairs which results in increased oxidation and reduction reactions.     

Preparation and characterization of modified nano-porous PVDF membrane with high antifouling property using UV photo-grafting

In this study, the poly(vinylidene fluoride) (PVDF) membrane was prepared via immersion precipitation technique and modified by UV photo-grafting of hydrophilic monomers on the top membrane surface. Acrylic acid (AA) and 2-hydroxyethylmethacrylate (HEMA) as acrylic monomers and 2,4-phenylenediamine (PDA) and ethylene diamine (EDA) as amino monomers were used at different concentrations to modify the membrane and improve the hydrophilicity with less fouling tendency. Moreover the presence of benzophenon as photo-initiator for grafting the hydrophilic monomers onto PVDF membrane surface was elucidated. The virgin and modified PVDF membranes were characterized by contact angle, ATR-FTIR, SEM and cross-flow filtration. The contact angle measurements demonstrated that the hydrophilicities of the membranes were significantly enhanced by UV photo-grafting of hydrophilic monomers onto the membrane surface. The ATR-FTIR confirmed the occurrence of modification on PVDF membrane by UV photo-grafting. The pure water flux of membranes was declined by UV photo-grafting but the milk water permeation and protein rejection were slightly improved. Moreover the antifouling properties and flux recovery of PVDF membrane were improved by UV photo-grafting of hydrophilic monomers.     

Titanium dioxide-coated nanofibers for advanced filters

This article reports on titanium dioxide (TiO₂)-coated nanofibers deposited on a filter surface by the electrospinning process. After depositing a micrometer-thick film of polyamide 11 nanofibers on polypropylene fabric, TiO₂ nanoparticles can be directly electrosprayed onto the nanofibers. X-ray diffraction and Raman spectroscopy showed minimal change in the phase composition (anatase and rutile) and no change in the particle size of nanocrystalline TiO₂ after coating. Scanning electron microscopy demonstrated that nanofibers were uniformly coated by titanium dioxide nanoparticles without agglomeration. TiO₂-coated filters showed excellent photocatalytic-bactericidal activity and photo-induced hydrophilicity.     

Enhanced visible light photocatalytic properties of Fe-doped TiO2 nanorod clusters and monodispersed nanoparticles

In order to get photocatalysts with desired morphologies and enhanced visible light responses, the Fe-doped TiO₂ nanorod clusters and monodispersed nanoparticles were prepared by modified hydrothermal and solvothermal method, respectively. The microstructures and morphologies of TiO₂ crystals can be controlled by restraining the hydrolytic reaction rates. The Fe-doped photocatalysts were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), UV-vis absorption spectroscopy (UV-vis), N₂ adsorption-desorption measurement (BET), and photoluminescence spectroscopy (PL). The refinements of the microstructures and morphologies result in the enhancement of the specific surface areas. The Fe³⁺-dopants in TiO₂ lattices not only lead to the significantly extending of the optical responses from UV to visible region but also diminish the recombination rates of the electrons and holes. The photocatalytic activities were evaluated by photocatalytic decomposition of formaldehyde in air under visible light illumination. Compared with P25 (TiO₂) and N-doped TiO₂ nanoparticles, the Fe-doped photocatalysts show high photocatalytic activities under visible light.