Characterization of the synthesis and reactivity behavior of nanostructured vanadia model catalysts using XPS and vibrational spectroscopy

Nanostructured vanadia model catalysts, i.e., highly dispersed vanadium oxide supported on mesoporous silica SBA-15 (VO_x/SBA-15), were prepared. The mechanism for the synthesis of VO_x/SBA-15 was elucidated by detailed characterization of the individual synthesis steps using XPS and vibrational spectroscopy. The resulting surface vanadium oxide species (0-2.3 V/nm²), grafted on the inner pores of the SBA-15 silica matrix, consists of tetrahedrally coordinated vanadia as inferred from UV-VIS- and Raman spectroscopy. The prepared vanadia model catalysts were tested in the partial oxidation of methanol to formaldehyde yielding high formaldehyde selectivities of 94% at 350 °C. XPS and Raman analysis of the catalyst after reaction reveal the presence of methoxy as well as a significant amount of carbonaceous species on the surface. Our results demonstrate that a detailed understanding of partial oxidation reactions requires the combination of complementary spectroscopic techniques ultimately within one experimental set-up.     

Reactivity of monolayer V2O5 films on TiO2(1 1 0) produced via the oxidation of vapor-deposited vanadium

The growth, and reactivity of monolayer V₂O₅ films supported on TiO₂(1 1 0) produced via the oxidation of vapor-deposited vanadium were studied using X-ray photoelectron spectroscopy and temperature programmed desorption (TPD). Oxidation of vapor-deposited vanadium in 10⁻⁷ Torr of O₂ at 600 K produced vanadia films that contained primarily V³⁺, while oxidation in 10⁻³ Torr at 400 K produced films that contained primarily V⁵⁺. The reactivity of the supported vanadia layers for the oxidation of methanol to formaldehyde was studied using TPD. The activity for this reaction was found to be a function of the oxidation state of the vanadium cations in the film.     

Surface and catalytic properties of doped tin oxide nanoparticles

Mixed oxides composed of Zn-Sn, Ti-Sn and V-Sn were prepared by a co-precipitation method and evaluated as catalysts for methanol oxidation in an ambient fixed-bed reactor. Surface analysis by X-ray photoelectron spectroscopy (XPS) revealed an electronic interaction between dopant and Sn atoms in the oxide structure and showed the formation of surface states associated with the dopants. Oxygen vacancies were present on the Zn-doped oxide, and the oxidation of methanol to carbon oxides was favored. The Ti-doped oxide exhibited a favorable selectivity to dimethyl ether, related to the oxygen anions near Ti centers. Vanadium dopants not only dramatically increased the catalytic activity but also promoted the partial oxidation of methanol to formaldehyde. Results demonstrate that the bridging dopant-O-Sn bond acts as active sites and influences product distribution.     

Theoretical study of the influence of cation vacancies on the catalytic properties of vanadium antimonate

We have theoretically studied the influence of antimony and vanadium cation vacancies in the electronic structure and reactivity of vanadium antimonate, using molecular orbital methods. From the analysis of the electronic properties of the VSbO₄ crystal structure, we can infer that both antimony and vanadium vacancies increase the oxidation state of closer V cations. This would indicate that, in the rutile-type VSbO₄ phase the Sb and V cations defects stabilize the V in a higher oxidation state (V⁴⁺). Calculations of the adsorption energy for different toluene adsorption geometries on the VSbO₄(1 1 0) surface have also been performed. The oxidation state of Sb, V and O atoms and the overlap population of metal-oxygen bonds have been evaluated. Our results indicate that the cation defects influence in the toluene adsorption reactions is slight. We have computed different alternatives for the reoxidation of the VSbO₄(1 1 0) surface active sites which were reduced during the oxygenated products formation. These calculations indicate that the V cations in higher oxidation state (V⁴⁺) are the species, which preferentially incorporate lattice oxygen to the reduced Sb cations. Thus, the cation defects would stabilize the V⁴⁺ species in the VSbO₄ structure, determining its ability to provide lattice oxygen as a reactant.     

A synchrotron XPS study of the vanadia–titania system as a model for monolayer oxide catalysts

The deposition of vanadium metal onto stoichiometric TiO₂(110) has been studied with photoelectron spectroscopy from low to high coverages of vanadium. A synchrotron source was employed in XPS experiments for the study of submonolayer coverages of vanadium in order to determine the oxidation state of the vanadia species formed at submonolayer coverages. The exposure of the titania surface to vanadium metal results in charge-transfer from vanadium to titania at the interface. At low doses of the metal vigorous interaction between the metal and titania surface yields reduction of the Ti⁴⁺ species to Ti³⁺ at the interface, as evidenced by both changes in the lineshape of the Ti 2p XPS spectra and Ti LIII-edge spectra. Concurrent with this surface reduction vanadium metal is oxidized. At higher vanadium doses the vanadium 2p binding energy indicates the formation of metallic vanadium. When metallic vanadium deposition is followed by exposure of the surface to oxygen, only one vanadium species remains on the surface, the binding energy of which corresponds to that of the oxide present initially at low doses of vanadium metal. By comparison of the V 2p binding energies to those of bulk oxides, it appears that the oxidation state of the vanadium in the oxide species is +3, suggesting the formation of V₂O₃ on the surface. Vanadium LIII-edge data also suggest that V₂O₅ is not formed by the oxidation of predosed vanadium metal.     

Surface nature of nanoparticle zinc-titanium oxide aerogel catalysts

Nanoparticle zinc-titanium oxide materials were prepared by the aerogel approach. Their structure, surface state and reactivity were investigated. Zinc titanate powders formed at higher zinc loadings possessed a higher surface area and smaller particle size. X-ray photoelectron spectroscopy (XPS) revealed a stronger electronic interaction between Zn and Ti atoms in the mixed oxide structure and showed the formation of oxygen vacancy due to zinc doping into titania or zinc titanate matrices. The 8-45 nm aerogel particles were evaluated as catalysts for methanol oxidation in an ambient flow reactor. Carbon dioxide was favorably produced on the oxides with anion defects. Titanium based oxides exhibited a high selectivity to dimethyl ether, so that a strong Lewis acidic character suggested for the catalysts was associated primarily with the Ti⁴⁺ center. Both methanol conversion and dimethyl ether formation rates increased with increasing the zinc content added to the oxide support. Results demonstrate that cubic zinc titanate phases produce new Lewis acid sites having also a higher reactivity and that the nature of the catalytic surface transforms from Lewis acidic to basic characters due to the presence of reactive oxygen vacancies.     

多金属氧酸盐TBA3[VW5O19]及TBA4[PVW11O40]的固体核磁共振研究

多金属氧酸盐（简称多酸,Polyoxometalates,POMs)是由处于d⁰电子构型的前过渡金属元素通过共边或共角缩聚而成的金属-氧簇类化合物．由于其具有丰富的分子结构和独特的物理化学性质,已经被广泛应用于功能材料、催化化学和药物化学等领域．其中钒取代的多酸阴离子具有很好的催化活性,特别是对烃类的氧化,它的活性主要受钒取代的数目和钒中心的阴离子环境这两个因素影响．该文利用固体核磁技术分析了一取代钒的两类典型结构中⁵¹V的局域结构和化学环境,以及有机阳离子对多酸阴离子结构的影响,特别是对⁵¹V的化学环境的影响,为研究多酸的催化活性和催化机理提供基本的结构信息．     

脉冲溅射V2O5薄膜结构和性能研究

V2O5薄膜具有很好的离子注入/退出可逆性,是最有潜力的锂离子储存层的候选材料之一,它的电学特性与制备方法、化学计量比、结构和取向等有直接关系,仔细控制工艺参量是制备出在锂电池上应用的V2O5薄膜关键。研究中采用脉冲磁控反应溅射方法,通过精确地控制氧分压、基底温度等关键工艺参量,在石英玻璃和硅片上制备V2O5薄膜。利用X射线衍射和X射线光电子谱,分析了薄膜的成分、相结构、结晶和价态情况,用原子力显微镜表征了薄膜的微观结构,用分光光度计测量从200—2500nm波段V2O5薄膜纯度高、相结构单一、结晶度好。高低温电阻变化2个量级,薄膜的光学能隙为2.46eV。     

Characterization and catalytic performance of Zr-Mo-oxide catalysts for selective oxidation of methane to formaldehyde

The selective oxidation of methane to formaldehyde has been investigated over a series of Zr-Mo-oxide catalysts. Comparative characterization of these catalysts has been carried out by BET specific surface area (BET), X-ray diffraction (XRD), laser Raman spectroscopy (LRS), temperature programmed reduction of hydrogen (H₂-TPR), and X-ray photoelectron spectroscopy (XPS). The Zr-Mo-oxide catalyst with 12 wt% Mo is found to be highly selective and yields formaldehyde by selective oxidation of methane. The interaction between Mo and Zr induces changes of physicochemical properties such as structure, crystal size, reducible properties, charge of ion and molybdenum oxide species etc., which in turn determines the catalytic performance. These effects are a function of Mo content. Zr(MoO₄)₂in these catalysts might be responsible for selective oxidation of methane to formaldehyde.     

Structural, compositional and magnetic characterization of bulk V2O5 doped ZnO system

This paper investigates the structural, compositional and magnetic properties of vanadium doped ZnO bulk samples prepared by solid state reaction technique. The Rietveld refinement analysis for XRD results of samples showed small change in lattice parameters for 3 and 5% vanadium doped ZnO samples indicating the substitution of Zn²⁺ ions by vanadium ions in ZnO lattice. Raman spectroscopy reveals the change in ZnO modes positions due to vanadium doping. The appearance of E₁ and E₂ modes showed that the wurtzite structure of ZnO is still maintained after doping of vanadium oxide. XPS analysis confirms the presence of the different elements and oxidation states of vanadium ions. M-H curves obtained from VSM showed weak ferromagnetism in the samples. The observation of ferromagnetic behavior indicates the formation of ZnVO phase with V²⁺ ion substitution in the ZnO lattice. XPS scans of the etched bulk samples confirmed the 2+ oxidation state of vanadium ions in our samples explaining the origin of ferromagnetism.     

Surface oxidation of liquid Sn

We report the results of an X-ray scattering study that reveals oxidation kinetics and formation of a previously unreported crystalline phase of SnO at the liquid-vapour interface of Sn. Our experiments reveal that the pure liquid Sn surface does not react with molecular oxygen below an activation pressure of ∼5.0 × 10⁻⁶ Torr. Above that pressure a rough solid Sn oxide grows over the liquid metal surface. Once the activation pressure has been exceeded the oxidation proceeds at pressures below the oxidation pressure threshold. The observed diffraction pattern associated with the surface oxidation does not match any of the known Sn oxide phases. The data have an explicit signature of the face-centred cubic structure, however it requires lattice parameters that are about 9% smaller than those reported for cubic structures of high-pressure phases of Sn oxides.     

Growth and characterization of model oxide catalysts

Oxide catalysts are frequently used to convert toxic species to environmentally benign molecules, and to prevent the formation of toxic species in the first place. In this paper, growth and characterization of model oxide systems employed in both approaches is discussed. An example of the former approach is the selective catalytic reduction (SCR) of NO emitted from power plants by NH₃, which employs tungsten and vanadium oxides supported on the anatase polymorph of TiO₂. To model SCR catalysts, epitaxial titanium, vanadium and tungsten oxide films were grown using molecular beam epitaxy and magnetron sputtering. Two different anatase orientations were grown on LaAlO₃ substrates and their interactions with vanadia were characterized. On LaAlO₃ (0 0 1), anatase exposed a (4 × 1) reconstructed (0 0 1) surface. Vanadia lifted the reconstruction and at 1 ML a (1 × 1) surface with mostly V⁵⁺ was observed. Continued V₂O₅ growth led to loss of order, but at high temperatures epitaxial VO₂ could be grown; vanadia behaved similarly on anatase films on LaAlO₃ (1 1 0). Results suggested that the monolayer is pseudomorphic with O adsorption oxidizing the surface V to 5+, since the anatase structure cannot accommodate more bulk oxygen, only a monolayer can be pseudomorphic and have only V⁵⁺. Thus the vanadia monolayer has unique structural and chemical properties that can help explain why vanadia monolayers on TiO₂ are much more active than bulk V₂O₅. For WO₃, a series of added row reconstructions were observed as the epitaxial films were reduced. The effect of these structures on surface chemistry was characterized by studying 1-propanol adsorption. The results indicated that the structure of the WO₃ surface did not alter its catalytic function but had a strong effect on reaction kinetics. As an example of a system where catalysts prevent the formation of toxic species, the reactivity of oxidized Pd surfaces used in CH₄ catalytic combustion were studied. An ordered PdO-like monolayer was found to be less reactive towards CO than adsorbed O on Pd. On the other hand, the PdO layer favored a lower activation energy C₃H₆ oxidation pathway. The results indicated that Pd oxidation reduces the sticking coefficient of reactive species but once molecules adsorb, the oxide surface can reduce the activation energy for subsequent reaction.     

Ultrathin film growth and spectroscopic characterization of VOx (0.8x1.3) on Pt(1 1 1)

VO_x ultrathin epitaxial films (0.8x1.3) have been grown on Pt(1 1 1) by evaporating vanadium in a low and well-controlled water background (1×10⁻⁷ Pa). X-ray photoelectron spectroscopy, ultraviolet photoelectron spectroscopy and X-ray excited auger electron spectroscopy data strongly indicate that vanadium(II) in the predominant oxidation state. Angle-scanned photoelectron diffraction data are compatible with a single domain film, bearing a rock-salt VO structure and exposing the (1 1 1) plane. Such films evolve toward more oxidized species within hours, probably due to oxidation by residual water in the chamber.     

An XPS study on the surface reduction of V2O5(0 0 1) induced by Ar ion bombardment

The effect of the irradiation with Al Kα X-rays during an XPS measurement upon the surface vanadium oxidation state of a fresh in vacuum cleaved V₂O₅(0 0 1) crystal was examined. Afterwards, the surface reduction of the V₂O₅(0 0 1) surface under Ar⁺ bombardment was studied. The degree of reduction of the vanadium oxide was determined by means of a combined analysis of the O1s and V2p photoelectron lines. Asymmetric line shapes were needed to fit the V³⁺2p photolines, due to the metallic character of V₂O₃ at ambient temperature. Under Ar⁺ bombardment, the V₂O₅(0 0 1) crystal surface reduces rather fast towards the V₂O₃ stoichiometry, after which a much slower reduction of the vanadium oxide occurs.     

Photoemission and LEED study of the Sn/Rh(111) surface--early oxidation steps and thermal stability

We have deposited two monolayers of Sn onto Rh(111) single crystal. After the deposition, no ordered structure was revealed by low energy electron diffraction (LEED). We oxidized the obtained system in a low-pressure oxygen atmosphere at 420 K. The oxidized sample was then gradually heated to study the thermal stability of the oxide layer. We characterized the system by synchrotron radiation stimulated photoelectron spectroscopy and LEED. Valence band and core level photoelectron spectra of rhodium, tin and oxygen were used to study the oxidation of the Sn-Rh(111) surface and its behaviour upon annealing. A low stoichiometric oxide of Sn was created on the surface. The oxidation process did not continue towards creation of SnO(2) with higher oxygen dose. The annealing at 970 K caused decomposition of the surface oxide of Sn and creation of an ordered (√3 × √3)R30° Sn-Rh(111) surface alloy.     

Influence of the geometric structure on the V L3 near edge X-ray absorption fine structure from vanadium phosphorus oxide catalysts

We present the V L₃ near edge X-ray absorption fine structure (NEXAFS) of a vanadium phosphorus oxide (VPO) catalyst. The spectrum is related to the V3d–O2p hybridised unoccupied states. The overall peak position at the V L₃-absorption edge is determined by the formal oxidation state of the absorbing vanadium atom. Details of the absorption fine structure are influenced by the geometric structure of the compound. Empirically we found a linear relationship between the energy position of several absorption resonances and the V–O bond length of the participating atoms. This allows identification of the contribution of specific V–O bonds to the near edge X-ray absorption fine structure. The bond length/resonance position relationship will be discussed under consideration of relations between geometric structure and NEXAFS features observed in X-ray absorption experiments and theory.     

锐钛矿型氧化物XO2（X=Ti,Sn,Zr,Ir）表面氧化性对NH3气体光学气敏传感特性的影响

摘要 金属氧化物气敏传感材料一直是当今的热门研究课题,锐钛矿相金属氧化物XO2（X=Ti,Sn,Zr,Ir）是具有传感特性的常见材料。光学气敏效应是指气体分子吸附在气敏传感材料上,与表面氧空位发生氧化还原反应,由于光学性质发生改变而检测出气体的成分和浓度,因此,氧化还原反应的强弱是反应传感性能的核心原因。本文采用密度泛函理论(DFT)体系下广义梯度近似(GGA)第一性原理平面波超软赝势方法,分析和计算了含氧空位的锐钛矿相XO2（X=Ti,Sn,Zr,Ir）表面特性。通过以NH3为目标分子,研究分子表面吸附引起的氧化还原反应的机理,分析不相同的氧化物表面的几何结构、吸附能、态密度、差分电荷密度、电荷布居、电荷转移、光学性质等。研究发现：目标分子稳定吸附在氧化物表面后改变材料光学性质。SnO2表面对分子的吸附能最大,IrO2表面与分子的吸附距离最小。NH3分子与表面间存在电荷转移,其转移电子数目大小为:IrO2＞TiO2＞ZrO2＞SnO2,氧化物表面氧化性的大小为:IrO2氧空位＞TiO2氧空位＞ZrO2氧空位＞SnO2氧空位;比较吸收谱和反射谱发生变化最为明显的是TiO2表面。结论,在可见光范围内,波长在400~530nm时,SnO2表面光学气敏传感效应更好。而在530~760nm范围TiO2表面光学气敏传感效应更好。     

Influence of surface modification by vanadium oxide and carbon on the electrochemical performance of LiFePO4/C

Surface modification with metal oxides is an efficient method to improve the performance of LiFePO₄. Carbon and V₂O₃ co-coated LiFePO₄ is synthesized by carbothermal reduction method combined with star-balling technique, and vanadium oxide is produced in situ. The structure and pattern of LiFePO₄/C modified with different amounts of vanadium oxide (0–5 mol%) were studied by X-ray diffraction, field-emission scanning electron microscopy, transmission electron microscopy, and micro-Raman spectroscopy. The electrochemical performance of material electrodes was analyzed by constant current charge–discharge and electrochemical impedance spectra (EIS). Electrochemical test results show that sample B (1.0 mol%) exhibits the best electrochemical performance, whose discharge capacity is up to 160.1, 127.2, and 88.4 mAh?g^?1 at 1, 5, and 10 °C, respectively. It indicates that V₂O₃ modification efficiently improves specific capacity and rate capability. The EIS experiment demonstrates that catalytic activity and reversibility of the cathode electrode are obviously increased by the surface modification of vanadium oxide.     

New counter electrode prepared as vanadium oxide and V/Ce oxide films: preparation and characterization

Vanadium oxide and mixed V/Ce-oxide films at 78, 55, 38, 32 atomic % of V were prepared via the sol-gel route from an aqueous colloidal solution of inorganic precursors. The influence of the added cerium precursor on their electrochemical, optical and structural properties was investigated by cyclic voltammetry (CV), X-ray analysis, IR spectroscopy and UV-VIS techniques. The electrochemical stability of films was tested by CV measurements in 1 M LiClO₄ in propylene carbonate electrolyte. The addition of CeO₂ improved the poor stability of vanadium oxide films and enhanced their ion-charge capacity up to 30 mC/cm² for thicknesses about 300 nm. The intercalation of Li⁺ ions in vanadium oxide and V/Ce-oxide films was followed by FT-IR spectroscopy performed at near-grazing incidence angle (NGIA) conditions in combination with CV measurements at potentials of −1.5 V and +2.0 V (vs. Ag/AgCl). The observed shift of V–O_v vibrations in the IR spectra confirmed the intercalation of Li⁺ ions.     

Oxidation of vanadium nitride and titanium nitride coatings

The oxidation of vanadium nitride (VN) and titanium nitride (TiN) coatings in ultra-high vacuum has been investigated in situ by X-ray photoelectron spectroscopy. On the VN coatings mixed oxide layers containing V³⁺ and V⁴⁺ species form at elevated temperatures (?600°C) and at high oxygen exposures, which cover completely the VN surface. Under similar oxidation conditions the TiN surface oxidises partially to a mixture of TiO₂ and Ti oxynitride (TiO_xN_y) phases. This oxidation behaviour has been correlated to the tribological properties of the VN and TiN coatings investigated recently.