A DFT study the solvent effects of H2 adsorption on Cu(h k l) surface

Density functional theory (DFT) combined with conductor-like solvent model (COSMO) have been performed to study the solvent effects of H₂ adsorption on Cu(h k l) surface. The result shows H₂ can not be parallel adsorbed on Cu(h k l) surface in gas phase and only vertical adsorbed. At this moment, the binding energies are small and H₂ orientation with respect to Cu(h k l) surfaces is not a determining parameter. In liquid paraffin, when H₂ adsorbs vertically on Cu(h k l) surface, solvent effects not only influences the adsorptive stability, but also improves the ability of H₂ activation; When H₂ vertical adsorption on Cu(h k l) surface at 1/4 and 1/2 coverage, H-H bond is broken by solvent effects. However, no stable structures at 3/4 and 1 ML coverage are found, indicating that it is impossible to get H₂ parallel adsorption on Cu(h k l) surfaces at 3/4 and 1 ML coverages due to the repulsion between adsorbed H₂ molecules.     

Effective biaxial modulus and strain energy density of ideally (h k l)-fiber-textured cubic polycrystalline films

The effective biaxial modulus (M_eff) and strain energy density (W) of cubic polycrystalline films with ideally (h k l) fiber textures are estimated using Vook-Witt (VW) grain interaction model and the data are compared with those derived from Voigt, Reuss and Voigt-Reuss-Hill (VRH) models. Numerical results show that the VW average of M_eff for ideally (1 0 0)- or (1 1 1)-fiber-textured films is identical to the VRH average of M_eff. For (1 1 0) and (1 1 2) planes, however, the VW average of M_eff for (1 1 0)-fiber-textured film is larger than that of (1 1 2)-fiber-textured film when the Zener anisotropic factor (A_R) is not equal to 1. Furthermore, M_eff and W exhibit incremental tendencies with the increase of the orientation factor (Γ_h k l) for the [h k l] axis when A_R > 1, implying that M_eff and W have the minimums on the (1 0 0) plane. Reversely, M_eff and W decrease with the increasing Γ_h k l when A_R < 1. This means that M_eff and W on (1 1 1) plane have the minimums.     

Anisotropy analysis of the surface energy of hcp (c/a < 1.633) metals

In this paper, anisotropy of the surface energy of 5 hcp metals Be, Hf, Ru, Ti and Y have been analyzed. The surface energies of three kinds of representative surfaces, (h 0 l), (h h l) and (h k 0) belong to [0 1 0], [] and [0 0 1] crystal band, respectively, have been calculated using the modified embedded atom method. For all 5 hcp metals, the (1 1 0) plane has the minimum surface energy in all 35 surfaces studied. Considering surface energy minimization solely, the (1 1 0) texture should be favorable in the hcp films. The fact that the short termination corresponds to much lower surface energy than long one implies the former is more stable for those surfaces having two possible terminations. Such as the prism plane (1 0 0), only the short termination was observed in experiment.     

Facetting and (n × 1) reconstructions of SrTiO3(1 1 0) surfaces

(n × 1) reconstructions and facetting of the (1 1 0) polar surface of SrTiO₃ are studied by means of a combination of shell model and density functional calculations. The polarity compensation can be achieved through the formation of {1 0 0} nano-facets, which play a crucial role in the reconstruction process. The behaviors of various possible terminations (Sr, Ti, and O) are analyzed, as well as their atomic structure and energetics. Their stability in different chemical environments is discussed, with respect to previous formulations and experimental results. The Sr-terminated surface tends to expose large facets, while the TiO and O terminations are marginally stabilized or even destabilized by (n × 1) reconstructions, respectively. Trend to facetting results from a subtle competition between the thermodynamic stability of the ideal non stoichiometric (n × 1) surfaces, and huge atomic relaxations that contribute to the lowering of the surface energy differently for each termination.     

Oxygen-induced nano-faceting of Ir(2 1 0)

The adsorption of oxygen and the nanometer-scale faceting induced by oxygen have been studied on Ir(2 1 0). Oxygen is found to chemisorb dissociatively on Ir(2 1 0) at room temperature. The molecular desorption process is complex, as revealed by a detailed kinetic analysis of desorption spectra. Pyramid-shaped facets with {3 1 1} and (1 1 0) orientations are formed on the oxygen-covered Ir(2 1 0) surface when annealed to T?600 K. The surface remains faceted for substrate temperatures T<850 K. For T>850 K, the substrate structure reverts to the oxygen-covered (2 1 0) planar state and does so reversibly, provided that oxygen is not lost due to desorption or via chemical reactions upon which the planar (2 1 0) structure remains. A clean faceted surface was prepared through the use of low temperature surface cleaning methods: using CO oxidation, or reaction of H₂ to form H₂O, oxygen can be removed from the surface while preserving (“freezing”) the faceted structure. The resulting clean faceted surface remains stable for T<600 K. For temperatures above this value, the surface irreversibly relaxes to the planar state.     

Oxygen induced facet formation on Rh(2 1 0) surface

Oxygen induced nanometer-scale faceting of the atomically rough Rh(2 1 0) surface has been studied using Auger electron spectroscopy (AES), low energy electron diffraction (LEED), and scanning tunneling microscopy (STM). The Rh(2 1 0) surface completely covered with nanometer-scale facets when annealed at ≥550 K in the presence of oxygen. LEED studies reveal that the pyramidal faceted surface is characterized by three-sided nanoscale pyramids exposing (7 3 1), (7 3 −1) and (1 1 0) faces. A clean faceted surface was prepared through the use of low temperature surface cleaning method using the reaction with H₂ while preserving (“freezing”) the pyramidal facet structure. The resulting clean faceted surface remains stable for T ∼ 600 K and for higher temperatures; the faceted surface irreversibly relaxes to the planar surface. STM measurements confirms the formation of nanopyramids with average pyramid size ranging from 12 to 21 nm depending upon the annealing temperature. The nanopyramidal faceted Rh surface may be used as a potential template for the growth of metallic nanoclusters and for structure sensitive reactions.     

Influence of Co doping content on its valence state in Zn1−xCoxO (0 ≤ x ≤ 0.15) thin films

Zn_1−xCo_xO (0 ≤ x ≤ 0.15) thin films grown on Si (1 0 0) substrates were prepared by a sol-gel technique. The effects of Co doped on the structural, optical properties and surface chemical valence states of the Zn_1−xCo_xO (0 ≤ x ≤ 0.15) films were investigated by X-ray diffraction (XRD), ultraviolet-visible spectrometer and X-ray photoelectron spectroscopy (XPS). XRD results show that the Zn_1−xCo_xO films retained a hexagonal crystal structure of ZnO with better c-axis preferred orientation compared to the undoped ZnO films. The optical absorption spectra suggest that the optical band-gap of the Zn_1−xCo_xO thin films varied from 3.26 to 2.79 eV with increasing Co content from x = 0 to x = 0.15. XPS studies show the possible oxidation states of Co in Zn_1−xCo_xO (0 ≤ x ≤ 0.05), Zn_0.90Co_0.10O and Zn_0.85Co_0.15O are CoO, Co₃O₄ and Co₂O₃, with an increase of Co content, respectively.     

The Lamb-dip spectrum of the J + 1 ← J (J = 0, 1, 3-8) transitions of HCN: The nuclear hyperfine structure due to H, C, and N

The pure rotational J + 1 ← J transitions, with J = 0, 1, 3-8, of H¹³CN have been observed in the millimeter- and submillimeter-wave region using the Lamb-dip technique to resolve the hyperfine structure due to H, ¹³C, and ¹⁴N. The present observations allow us to provide for the first time the spin-rotation constant of ¹³C and the spin-spin interaction constant S₁₂ (between H and ¹³C) as well as to remarkably improve the quadrupole coupling and spin-rotation constants of ¹⁴N. In addition, a good empirical estimation of C_I(H), based on ab initio calculations, has also been provided. Furthermore, our frequencies together with previous data permit to determine the most accurate ground state rotational parameters known up to now.     

CoPt alloy grown on the WSe2(0 0 0 1) van der Waals surface

The structural and magnetic properties of 3-nm-thick CoPt alloys grown on WSe₂(0 0 0 1) at various temperature are investigated. Deposition at room temperature leads to the formation of a chemically disordered fcc CoPt alloy with [1 1 1] orientation. Growth at elevated temperatures induces L1₀ chemical order starting at 470 K accompanied with an increase in grain size and a change in grain morphology. As a consequence of the [1 1 1] growth direction, the CoPt grains can adopt one of the three possible variants of the L1₀ phase with tetragonal c-axis tilted from the normal to the film plane direction at 54°. The average long-range order parameter is found to be 0.35(±0.05) and does not change with the increase in the deposition temperature from 570 to 730 K. This behavior might be related to Se segregation towards the growing facets and surface disorder effects promoted by a high surface-to-volume ratio. Magnetic studies reveal a superparamagnetic behavior for the films grown at 570 and 730 K in agreement with the film morphology and degree of chemical order. The measurements at 10 K reveal the orientation of the easy axis of the magnetization lying basically in the film plane.     

A perturbation theory study of H2 on LiF(0 0 1)

In response to recent helium atom scattering (HAS) results, Monte Carlo (MC) simulations and perturbation theory have been performed for H₂ on LiF(0 0 1). MC simulations predict that H₂ molecules form a series of structures, p(2 × 2), p(8 × 2), p(4 × 2) with coverages Θ = 0.5, 0.625 and 0.75, respectively, that are stable up to 8 K. This is in partial agreement with the HAS results that report c(2 × 2) and c(8 × 2) structures; they agree in terms of coverage and stability, but disagree in terms of symmetry. To reconcile the results of the simulations and experiments, the orientation of the adsorbed H₂ molecules was studied using perturbation theory. These calculations show that the adsorbed H₂ molecules are azimuthally delocalized and that the structures are c-type rather then p-type. The calculations also indicate that p-H₂ and helicoptering o-H₂ prefer cationic sites, while cartwheeling o-H₂ prefers anionic sites.     

RAIRS studies of CO adsorption on Pd/CeO2−x(1 1 1)/Pt(1 1 1)

Reflection absorption infrared spectroscopy (RAIRS) has been used to investigate the adsorption of CO on CeO_2−x-supported Pd nanoparticles at room temperature. The results show that when CeO_2−x is initially grown on Pt(1 1 1), a small proportion of the surface remains as bare Pt sites. However, when Pd is deposited onto CeO_2−x/Pt(1 1 1), most of the Pd grows directly on top of the CeO_2−x(1 1 1). RAIR spectra of CO adsorption on 1 ML Pd/CeO_2−x/Pt(1 1 1) show a broad CO-Pd band, which is inconsistent with a single crystal Pd surface. However, the 5 ML and 10 ML Pd/CeO_2−x/Pt(1 1 1) spectra show vibrational bands consistent with the presence of Pd(1 1 1) and (1 0 0) faces, suggesting the growth of Pd nanostructures with well defined facets.     

Linear scaling of the interlayer relaxations of the vicinal Cu(p,p,p − 2) surfaces with the number of atom-rows in the terraces

We investigate the multilayer relaxation trends in the vicinal Cu(p,p,p − 2) surfaces employing the all-electron full-potential linearized augmented plane-wave method. Calculations are performed for the (3 3 1), (2 2 1), (5 5 3), (3 3 2), (7 7 5), and (4 4 3) surfaces, which have 3, 4, 5, 6, 7, and 8 atom-rows in the terrace, respectively. The following trends are identified: (i) The interlayer relaxations perpendicular to the surface scale almost linearly with the number of atom-rows in the terraces. (ii) The nearest-neighbor distances do not depend on the surface termination, but only on the local coordination. (iii) For Cu(p,p,p − 2) in which the topmost n surface layers have nearest-neighbor coordination smaller than the bulk Cu (calculated for the unrelaxed surfaces), the topmost (n − 1) interlayer spacings (d₁₂, … , d_n−1,n) contract compared with the unrelaxed spacing, while the nth interlayer spacing (d_n,n+1) expands. The next (n − 2) interlayer spacings (d_n+1,n+2, … , d_{2n−2,2n−1}) contract, while the interlayer spacing indicated by d_2n−1,2n expands. A similar rule was found for the relaxations parallel to the surfaces. These trends provide a better understanding of the atomic structure of vicinal Cu surfaces.     

Adsorption and reaction of bicyclic hydrocarbons at Pt(1 1 1) and Sn/Pt(1 1 1) surface alloys: trans-decahydronaphthalene (C10H18) and bicyclohexane (C12H22)

Adsorption and desorption of trans-decahydronaphthalene (C₁₀H₁₈) and bicyclohexane (C₁₂H₂₂) can be used to probe important aspects of non-specific dehydrogenation leading to surface carbon accumulation and establish better estimates of activation energies for C-H bond cleavage at Pt-Sn alloys. This chemistry was studied on Pt(1 1 1) and the (2 × 2)-Sn/Pt(1 1 1) and (√3 × √3)R30°-Sn/Pt(1 1 1) surface alloys by using temperature programmed desorption (TPD) mass spectroscopy and Auger electron spectroscopy (AES). These hydrocarbons are reactive on Pt(1 1 1) surfaces and fully dehydrogenate at low coverages to produce H₂ and surface carbon during TPD. At monolayer coverage, 87% of adsorbed C₁₀H₁₈ and 75% C₁₂H₂₂ on Pt(1 1 1) desorb with activation energies of 70 and 75 kJ/mol, respectively. Decomposition of C₁₀H₁₈ is totally inhibited during TPD on these Sn/Pt(1 1 1) alloys and decomposition of C₁₂H₂₂ is reduced to 10% of the monolayer coverage on the (2 × 2)-Sn/Pt(1 1 1) alloy and totally inhibited on the (√3 × √3)R30°-Sn/Pt(1 1 1) alloy. C₁₀H₁₈ and C₁₂H₂₂ are more weakly chemsorbed on these two alloys compared to Pt(1 1 1) and these molecules desorb in narrow peaks characteristic of each surface with activation energies of 65 and 73 kJ/mol on the (2 × 2) alloy and 60 and 70 kJ/mol on the (√3 × √3)R30°-Sn/Pt(1 1 1) alloy, respectively. Alloyed Sn has little influence on the monolayer saturation coverage of these two molecules, and this is decreased only slightly on these two Sn/Pt(1 1 1) alloys. The use of these two probe molecules enables an improved estimate of the activation energy barriers E* to break aliphatic C-H bonds in alkanes on Sn/Pt alloys; E* = 65-73 kJ/mol on the (2 × 2)-Sn/Pt(1 1 1) alloy and E* ? 70 kJ/mol on the (√3 × √3)R30°-Sn/Pt(1 1 1) alloy.     

Adsorption of water on thin V2O3(0 0 0 1) films

V₂O₃(0 0 0 1) films have been grown epitaxially on Au(1 1 1) and W(1 1 0). Under typical UHV conditions these films are terminated by a layer of vanadyl groups as has been shown previously [A.-C. Dupuis, M. Abu Haija, B. Richter, H. Kuhlenbeck, H.-J. Freund, V₂O₃(0 0 0 1) on Au(1 1 1) and W(1 1 0): growth, termination and electronic structure, Surf. Sci. 539 (2003) 99]. Electron irradiation may remove the oxygen atoms of this layer. H₂O adsorption on the vanadyl terminated surface and on the reduced surface has been studied with thermal desorption spectroscopy (TDS), vibrational spectroscopy (IRAS) and electron spectroscopy (XPS) using light from the BESSY II electron storage ring in Berlin. It is shown that water molecules interact only weakly with the vanadyl terminated surface: water is adsorbed molecularly and desorbs below room temperature. On the reduced surface water partially dissociates and forms a layer of hydroxyl groups which may be detected on the surface up to T ∼ 600 K. Below ∼330 K also co-adsorbed molecular water is detected. The water dissociation products desorb as molecular water which means that they recombine before desorption. No sign of surface re-oxidation could be detected after desorption, indicating that the dissociation products desorb completely.     

Observation of a (√3 × √3)-R30° reconstruction on GaN(0 0 0 1) by RHEED and LEED

A new reconstruction of √3 × √3-R30° has been observed on a GaN film grown on a 6H-SiC (0 0 0 1)-√3 × √3 surface using RHEED and LEED experimental techniques. The experimental LEED PF shows that the GaN film is Ga-terminated hexagonal. The surface is a mixture of two structures with a single bilayer height difference between them. One is a √3 × √3-R30° reconstruction with Ga-adatoms occupying the T4 sites. Another is a Ga-terminated 1 × 1 with no extra Ga on top. The area ratio of the √3 × √3 part to the 1 × 1 part is slightly larger than 1. The first principle total energy calculations and Tensor-LEED I-V curves simulations further confirm this structure model.     

Exorcising w < −1

We show that the combined dimming of Type Ia supernovae induced by both a cosmological constant and the conversion of photons into axions in extra-galactic magnetic fields can impersonate dark energy with an equation of state w < −1. An observer unaware of the presence of photon-axion conversion would interpret the additional dimming as cosmic acceleration faster than that induced by a cosmological constant alone. We find that this mechanism can mimic equations of state as negative as w ? −1.5. Our model does not have any ghosts, phantoms, and the like. It is fully consistent with the conventional effective field theory in curved space, and all existing observational constraints on the axions are obeyed.     

On the cΠ (v = 0) state of carbon monoxide

A full analysis of the near infrared c³Π-b³Σ⁺ (0-0) band is given and term values for both states determined. The c³Π (v = 0) state was jointly analysed with the perturbing k³Π (v = 2) state and data from the c³Π-X¹Σ⁺ (0-0) transition and 3A band system were included. It is shown that the available data are consistent with the c³Π (v = 0) state having near Hund’s case b coupling with a spin-orbit constant of A = 0.45 ± 0.02 cm⁻¹, a homogeneous perturbation with the k³Π (v = 2) state, and Λ-type doubling arising predominantly from its interaction with the j³Σ⁺ state. A discrepancy with a more recent report of the 3A band system is identified and discussed. The perturbed b³Σ⁺ state term values are consistent with a previously reported five state interaction model.     

Epitaxial growth of cobalt clusters on the bare and the oxide film grown on NiAl(1 0 0) surfaces

The structure of the nano-sized cobalt clusters on bare NiAl(1 0 0) and an oxidized NiAl(1 0 0) surfaces have been investigated by AES, LEED and RHEED. The deposition of Co onto bare NiAl(1 0 0) at room temperature led to small crystalline Co grains and surface asperities of substrate. The latter is likely induced by replacement of surface Al, Ni atoms by Co deposit. At 800 K Co particles aggregate to form clusters, but incorporation of Co into bulk NiAl(1 0 0) could occur upon annealing at 900 K. On the other hand, pure face-centered cubic (fcc) phase of Co crystallites of ≈1 nm in diameter with inclusion of smaller-sized particles (D < 1 nm) are observed on Θ-Al₂O₃ after Co deposition at room temperature. After annealing the Co nano-clusters grow larger at expense of small particles (D ≈ 3 nm), where the [1 1 0] and [−1 1 0] axis of the Co(0 0 1) facets are parallel to the [1 0 0] and [0 1 0] directions of (0 0 1)oxide, respectively. The in-plane lattice constant of Co clusters is ca. 4% larger than that of bulk Co, yielding less strain at the Co/oxide interface. A 15° ± 10% random orientation of the normal to (0 0 1) facet of Co clusters with respect to (0 0 1)oxide surface was deduced from the “arc”-shape reflection spots in RHEED. These results suggest that both orientation and phase of Co clusters are strongly affected by the nature and structure of oxide surface.     

CH4 dissociation on NiCo (1 1 1) surface: A first-principles study

A density-functional theory method has been conducted to investigate the adsorption of CH_x (x = 0-4) as well as the dissociation of CH_x (x = 1-4) on (1 1 1) facets of ordered NiCo alloy. The results have been compared with those obtained on pure Ni (1 1 1) surface. It shows that the adsorption energies of C and CH are decreased while it is increased for CH₃ on NiCo (1 1 1) compared to those on pure Ni (1 1 1). Furthermore, on NiCo (1 1 1), dissociation of CH_x prefers not to the top of Ni, but to the top of Co. The rate-determining step for CH₄ dissociation is considered as the first step of dehydrogenation on NiCo (1 1 1), while it is the fourth step of dehydrogenation on Ni (1 1 1). Furthermore, the activation barrier in rate-determining step is slightly higher by 0.07 eV on Ni (1 1 1) than that on NiCo (1 1 1). From above results, it is important to point out that carbon is easy to form on NiCo (1 1 1) although the adsorption energy of C atom is slightly decreased compared to that on Ni (1 1 1).     

Surface morphology of epitaxial lattice-matched Ba0.7Sr0.3O on Si(0 0 1) and vicinal Si(0 0 1)-4°[1 1 0] substrates

Exploring ways for self-organized structuring of insulating thin films, we investigated the possibility to produce replicas of step trains, given by a vicinal Si(0 0 1)-4°[1 1 0] surface, in layers of crystalline and perfectly lattice-matched Ba_0.7Sr_0.3O. For this purpose, we carried out high-resolution spot profile analyses in low-energy electron diffraction (SPA-LEED) both on flat Si(0 0 1) and on Si(0 0 1)-4°[1 1 0]. Oxide layers were generated by evaporating the metals in oxygen ambient pressure with the sample at room temperature. Our G(S) analysis of these mixed oxide layers reveals a strong influence of local compositional fluctuations of Sr and Ba ions and their respective scattering phases, which appears as an unphysically large variation of layer distances. Nevertheless, we are able to show that quite smooth and closed oxide films are obtained with an rms roughness of about 1 ML. These Ba_0.7Sr_0.3O films directly follow the step train of Sr-modified vicinal Si surfaces that form (1 1 3) oriented facets after adsorption of a monolayer of Sr. This proves that self-organized structuring of insulating films can indeed be an effective method.