A simple fluorescence quenching method for roxithromycin determination using CdTe quantum dots as probes

A new method for the determination of roxithromycin based on the fluorescence quenching of 3-mercaptopropionic acid-capped CdTe quantum dots (MPA-CdTe QDs) was developed. In ethanol medium, the fluorescence of CdTe quantum dots at 552 nm was quenched in the presence of roxithromycin. Based on this a simple, sensitive, and selective method for rapid determination of roxithromycin was described. Reaction time, interfering substances on the fluorescence quenching, and mechanism of the interaction of CdTe QDs with roxithromycin were investigated. After optimization, the proposed method allows the determination of roxithromycin over the range 25.0-350.0 μg ml⁻¹. The detection limit is 4.6 μg ml⁻¹. The proposed method was successfully applied to commercial capsules and tablets with satisfactory results. The recovery of the method was in the range of 96.8-102.5%.     

Determination of albumins by its quenching effect on the fluorescence of Tb-oxolinic acid complex in presence of sodium dodecyl sulphate

It is found that the fluorescence intensity of Tb³⁺-oxolinic acid (OA) complex can be greatly quenched by albumins in sodium dodecyl sulphate (SLS). Under optimum conditions, the quenched fluorescence intensity is in proportion to the concentration of proteins in the range of 5.0×10⁻⁸-1.0×10⁻⁵ g ml⁻¹ for bovine serum albumin (BSA), 1.0×10⁻⁷-1.0×10⁻⁵ g ml⁻¹ for human serum albumin (HSA) and 4.0×10⁻⁷-1.0×10⁻⁵ g ml⁻¹ for egg albumin (EA). Their detection limits (S/N=3) are 2.1×10⁻⁸, 2.5×10⁻⁸ and 5.0×10⁻⁸ g ml⁻¹, respectively. In addition, the interaction mechanism is also investigated.     

Novel multilayered porous silicon-based immunosensor for determining Hydroxysafflor yellow A

External random factors have a great influence on the fabrication of accurate photonic crystal, especially porous silicon-based photonic crystals. Compared with the binary photonic crystal, polybasic structure photonic crystal shows more stability and smaller effect of the random fluctuation. In this paper, we have fabricated a novel simple porous silicon polybasic Bragg's mirror combined with excellent specific antigen-antibody inmunoreaction as an immunosensor for determining Hydroxysafflor yellow A (HSYA), which is the main chemical component of Carthamus tinctorius L. The binding of HSYA and the polyclonal anti-HSYA antibodies causes red shifts in the reflection spectrum of the sensor, and the red shift was proportional to the HSYA concentration with linear relationship ranging from 1 to 3 μg mL⁻¹ with a detection limit of 0.78 ng mL⁻¹. Importantly, this research offers hope for development of a commercial porous silicon-based immunosensor for component determination of C. tinctorius L. or other antigens.     

Deposition of sputtered iridium oxide—Influence of oxygen flow in the reactor on the film properties

Thin films of iridium oxide have been deposited by reactive magnetron sputtering. The influence of oxygen partial pressure in the sputtering plasma on the composition, surface structure and morphology of the films has been studied by XRD, SEM and AFM analysis. An optimal combination of sputtering parameters yields stable microporous amorphous films with highly extended fractal surface. The electrochemical properties of these films have been investigated in view of their application as catalysts for water splitting, using the electrochemical techniques of cyclovoltammetry, electrochemical impedance spectroscopy, and steady state polarization. The SIROFs have shown an excellent electrochemical reversibility and a high catalytic activity toward the oxygen evolution reaction in 0.5 M H₂SO₄. A current density of 150 mA cm⁻² at potential of 1.7 V (versus Ag/AgCl) has been obtained at catalyst load of only 100 μg cm⁻². These results combined with the established long-term mechanical stability of the sputtered iridium oxide films (SIROFs) proved the advantages of the reactive magnetron sputtering as simple and reliable method for preparation of catalysts with precisely controlled composition, loading, and surface characteristics.     

One-step aqueous synthesis of CdS nanoparticles as a novel fluorescence probe for the ultrasensitive detection of DNA

One-step aqueous synthesis of CdS nanoparticles as a novel fluorescence probe for sensitive and selective determination of DNA with synchronous fluorescence spectrometric method has been developed. Different from the traditional organometallic route, in which toxic precursors or solvents might be used, the wet chemical approach demonstrated in this paper is superior in terms of simplicity, using of nontoxic materials, mild synthetic condition and good reproducibility. When Δλ=255 nm, maximum synchronous fluorescence is produced at 264 nm, the synchronous fluorescence intensity of the composite nanoparticles is significantly decreased in the presence of trace DNA at PH 0.91. Under optimal conditions, the linear ranges of the calibration curves are 0.08-30.0 μg mL⁻¹ for ctDNA and 0.05-35.0 μg mL⁻¹ for hsDNA, respectively. The detection limits are 1.5 ng mL⁻¹ for ctDNA and 2.2 ng mL⁻¹ for hsDNA, respectively. Furthermore, the method is successfully applied to the quantification of DNA in synthetic samples. The results show that this proposed method is stable, sensitive and practical for the determination of trace DNA.     

Colorimetric microdetermination of captopril in pure form and in pharmaceutical formulations

A simple, rapid, accurate, precise and sensitive colorimetric method for the determination of captopril (CAP) in bulk sample and in dosage forms is described. The method is based on oxidation of the drug by potassium permanganate in acidic medium and determination of the unreacted oxidant by measuring the decrease in absorbance for five different dyes; methylene blue (MB); acid blue 74 (AB), acid red 73 (AR), amaranth dye (AM) and acid orange 7 (AO) at a suitable λ_max (660, 610, 510, 520, and 485 nm), respectively. Regression analysis of Beer's plots showed good correlation in the concentration ranges (0.4-12.5, 0.3-10, 0.5-11, 0.4-8.3 and 0.5-9.3 μg ml⁻¹), respectively. The apparent molar absorbtivity, Sandell sensitivity, detection and quantitation limits were calculated. For more accurate results, Ringbom optimum concentration ranges were 0.5-12, 0.5-9.6, 0.6-10.5, 0.5-8.0 and 0.7-9.0 μg ml⁻¹, respectively. The validity of the proposed method was tested by analyzing in pure and dosage forms containing CAP whether alone or in combination with hydrochlorothiazide. Statistical analysis of the results reflects that the proposed procedures are precise, accurate and easily applicable for the determination of CAP in pure form and in pharmaceutical preparations. Also, the stability constant was determined and the free energy change was calculated potentiometrically.     

Synthesis, characterization and cytotoxicity of surface amino-functionalized water-dispersible multi-walled carbon nanotubes

Surface functionalization of multi-walled carbon nanotubes (MWCNTs), with amino groups via chemical modification of carboxyl groups introduced on the nanotube surface, using O-(7-azabenzotriazol-1-yl)-N,N,N′,N′-tetramethyluronium hexafluorophosphate (N-HATU) and N,N-diisopropylethylamine (DIEA) is reported. The N-HATU coupling agent provides faster reaction rate and the reaction occurs at lower temperature compared to amidation and acylation-amidation chemistry. The amines, 1,6-hexanediamine (HDA), diethylenetriamine (DETA), triethylenetetramine (TETA) and 1,4-phenylenediamine (PDA) were used. The resulting materials were characterized with different techniques such as FTIR, XRD, elemental analysis, TGA, TEM, UV-vis spectroscopy and cyclic voltammetry. MWCNTs functionalized with PDA posses the best dispersibility and electron transfer properties in comparison to the others amines. Functionalized MWCNTs, at the concentrations between 1 and 50 μg ml⁻¹, were not cytotoxic for the fibroblast L929 cell line. However, the concentrations of MWCNTs higher of 10 μg ml⁻¹ reduced cell growth and this effect correlated positively with the degree of their uptake by L929 cells.     

Deposition and electrostatic removal of gaseous organic contaminants on substrate surfaces

The adhesion behavior of di-n-butyl phthalate (DBP) onto different substrates (quartz, glass, and silicon) used as wafer surfaces was studied by using an in situ UV spectrophotometric technique. The results from the closed cell experiments revealed that greatest extent of DBP adhesion occurred on the quartz chip (0.154 μg cm⁻²), followed in the order by the glass (0.054 μg cm⁻²) and silicon (0.039 μg cm⁻²). By means of the in situ spectrophotometric observation, application of an electrical field at 290 V cm⁻¹ in the cell proved to be effective in inducing charging of DBP aerosols, which were consequently attracted towards the electrodes. This method can be applied to wafer storage and transport equipments to prevent wafer contamination from material outgassing representative by DBP.     

Synthesis, characterization and analytical applications of Ni(II)-ion imprinted polymer

Ion recognition-based separation techniques have received much attention because of their high selectivity for target ions. In this study, we have prepared a novel ion imprinted polymer (IIP) to remove nickel ions with high selectivity. The imprinted polymer was prepared by copolymerization of 2-hydroxy ethyl methacrylate (HEMA) with nickel vinylbenzoate complex in the presence of ethylene glycol dimethacrylate (EGDMA) as a crosslinker. The polymerization was carried out in bulk with free radical initiation using 2-methoxy ethanol as a solvent and porogen. The adsorbed nickel was completely eluted with 15 mL of 1 M HCl. Control polymer was also prepared by similar experimental conditions without using imprint ion. The above synthesized polymers were characterized by surface area measurements, FT-IR, microanalysis and SEM analysis. The adsorption capacity of IIP and CP was found to be 1.51 and 0.65 mmol g⁻¹, respectively. The optimal pH for quantitative enrichment was 6.5. Nature of eluent, eluent concentration and eluent volume were also studied. The relative selectivity factor (α_r) values of Ni(II)/Zn(II), Ni(II)/Cu(II) and Ni(II)/Co(II) were 78.6, 111.1 and 91.6, respectively. Five replicate determinations of 30 μg L⁻¹ of Ni(II) gave a mean absorbance of 0.067 with a relative standard deviation of 1.06%. The lowest concentration determined by GTA-AAS below which the recovery becomes non-quantitative is 6 μg L⁻¹. IIP was tested for removal of Ni(II) from sea water sample.     

Preconcentration of middle oxyethylated nonylphenols from water samples on magnetic solid phase

Magnetic solid phase extraction (MSPE) is proposed as a simple and fast method for the preconcentration of free middle oxyethylated nonylphenols (NPs) from water. Middle oxyethylated NPs were extracted by MSPE from different water samples (10 and 500 ml samples of distilled, potable, well, river and pond water in concentrations of 30 and 0.6 μg ml⁻¹) using magnetically modified polyphenyleneoxide, Tenax TA and Tenax GR as magnetic adsorbents. Recoveries were 80–100% and relative standard deviations were less than 10%.     

Lithium ion transport and ion-polymer interaction in PEO based polymer electrolyte plasticized with ionic liquid

The polyethylene oxide (PEO) based lithium ion conducting polymer electrolytes complexed with lithium trifluoromethanesulfonate (LiCF₃SO₃ or LiTf) plasticized with an ionic liquid 1-ethyl 3-methyl imidazolium trifluoromethanesulfonate (EMITf) have been reported. Morphological, spectroscopic, thermal and electrochemical investigations demonstrate promising characteristics of the polymer films, suitable as electrolyte in various energy storage/conversion devices. Significant structural changes have been observed in the polymer electrolyte due to the ionic liquid addition, investigated by X-ray diffraction (XRD) and optical microscopy. The ion-polymer interaction, particularly the interaction of imidazolium cation with PEO chains, has been evidenced by IR and Raman spectroscopic studies. The optimized composition of the polymer electrolyte i.e. PEO_25.LiTf + 40 wt.% EMITf offer room temperature ionic conductivity of ~ 3 × 10^− 4 S cm^− 1 with wide electrochemical stability window and excellent thermal stability. The ‘σ versus 1/T’ curves show apparent Arrhenius behavior below and above melting temperature. The ionic conductivity has been observed due to Li⁺ ions, as confirmed from ⁷Li-NMR studies, though the component ions of ionic liquid and anions also contribute significantly to the overall conductivity.     

Fluorescence enhancement effect for the determination of curcumin with yttrium(III)—curcumin—sodium dodecyl benzene sulfonate system

It is found that the fluorescence of curcumin is greatly enhanced by yttrium(III) (Y³⁺) in the presence of sodium dodecyl benzene sulfonate. Based on this, a sensitive fluorimetric method for the determination of curcumin in aqueous solution is proposed. In the potassium hydrogen phthalate (KHP) buffer, the fluorescence intensity of curcumin is proportional to the concentration of curcumin in the range of 7.37×10⁻⁴-0.18, 0.18-2.95 μg mL⁻¹ and the detection limit is 0.1583 ng mL⁻¹. The actual samples are satisfactorily determined. In addition, the interaction mechanism is also studied.     

Ionic conductivity and electrochemical stability of poly(methylmethacrylate)-poly(ethylene oxide) blend-ceramic fillers composites

The role of inorganic ceramic fillers namely nanosized Al₂O₃ (15-25 nm) and TiO₂ (10-14 nm) and ferroelectric filler SrBi₄Ti₄O₁₅ (SBT CIT) (0.5 μm) synthesized by citrate gel technique (CIT) on the ionic conductivity and electrochemical properties of polymer blend 15 wt% PMMA+PEO₈:LiClO₄+2 wt% EC/PC electrolytes were investigated. Enhancement in conductivity was obtained with a maximum of 0.72×10⁻⁵ S cm⁻¹ at 21 °C for 2 wt% of SrBi₄Ti₄O₁₅ (SBT CIT) composite polymer electrolyte. The lithium-ion transport number and the electrochemical stability of the composite polymer electrolytes at ambient temperature were analyzed. An enhancement in electrochemical stability was observed for polymer composites containing 2 wt% of SrBi₄Ti₄O₁₅ (SBT CIT) as fillers.     

Preparation of a novel fluorescence probe of terbium-europium co-luminescence composite nanoparticles and its application in the determination of proteins

Terbium-europium Tb-Eu/acetylacetone(acac)/poly(acrylamide) (PAM) co-luminescence composite nanoparticles were successfully prepared using the ultrasonic approach. The as-prepared composite nanoparticles show the characteristic emission spectra of Tb³⁺, located at 496 and 549 nm. Furthermore, the nanoparticles are water soluble, stable and have extremely narrow emission bands and high internal fluorescence quantum yield due to the co-luminescence effect. Further studies indicate that proteins can interact with the nanoparticles and induce the fluorescence quenching of the nanoparticles. Based on the fluorescence quenching of nanopaticles in the presence of proteins, a novel method for the sensitive determination of trace amounts of proteins was proposed. Under the optimal experimental conditions, the linear ranges of calibration curves are 0-3.5 μg mL⁻¹ for human serum albumin (HSA) and 0-4.0 μg mL⁻¹ for γ-globulin (γ−IgG), respectively. The limits of detection are 7.1 for HSA and 6.7ng mL⁻¹ for γ−IgG, respectively. The method was applied to the quantification of proteins in synthetic samples and actual human serum samples with satisfactory results. This proposed method is sensitive, simple and has potential application in the clinical assay of proteins.     

Designing of endlessly single mode polarization maintaining highly birefringent nonlinear micro-structure fiber at telecommunication window by FV-FEM

An endlessly single mode highly polarization maintaining nonlinear microstructure fiber at telecommunication window is reported via full-vector finite element method. By taking three ring hexagonal PCF with suitable fiber parameter such as air hole diameter in cladding region d = 0.8 μm, pitch 2.3 μm and introducing four symmetrical large air holes near core region d′ = 2 μm, single mode (V_eff ≤ π), small effective mode area 2.7 μm², nonlinear co-efficient 44.39 W⁻¹ km⁻¹, high phase birefringence of the order of 10⁻³ and group birefringence of the order of 10⁻⁴ with beat length 0.3 μm at wavelength 1.55 μm are achieved.     

Analysis of semibatch emulsion polymerization: role of ultrasound and initiator

In this work semibatch miniemulsion was carried out wherein the effect of free radicals produced by ultrasound and an external addition of initiator was examined. Influence of different variables on polymerization rate and polymer particle size has also been investigated. Over a range of 0-4% (by wt) initiator, the polymerization rate was found to increase over a range of 0.56-1.33 g L⁻¹ min⁻¹. Similarly monomer concentration range (7.2-15 wt.%) changed the polymerization rate from 1.33 to 2.61 g L⁻¹ min⁻¹. Under optimum parametric conditions polymer particle size 50 nm were obtained with a narrow size distribution. Syndiotactic phase of PMMA was observed by controlling the formulation recipe. Although, number of reports could be found in the literature [9], [13], [17], [18], [20] and [22] related to batch emulsion polymerization, this experimental data could be useful for the production of large scale monodispersed PMMA latex as all of the scale-up and design parameters have been qualitatively addressed.     

Investigations on Fe doped polyvinyl alcohol films with and without gamma (γ)-irradiation

This paper deals with the preparation of pure and ferric chloride (FeCl₃) doped polyvinyl alcohol (PVA) films by solution casting method. Optical and electrical properties were systematically investigated. We have found the decrease in optical band gap energy of PVA films on doping FeCl₃. The optical band gap energy values in the present work are found to be 3.10 eV for pure PVA, 2 eV for PVA:Fe³⁺ (5 mol%), 1.91 eV for PVA:Fe³⁺(15 mol%) and 1.8 eV for PVA:Fe³⁺(25 mol%). Direct current electrical conductivity (σ) of pure, FeCl₃ doped PVA films in the temperature range 70-127 °C has been studied. At 387 K dc electrical conductivity of pure PVA film is 5.5795 μ Ω⁻¹ cm⁻¹, PVA:Fe³⁺ (5 mol%) film is 10.0936 μ Ω⁻¹ cm⁻¹ and γ-Irradiated PVA:Fe³⁺ (5 mol%) film for 900 CGY/min is 22.1950 μ Ω⁻¹ cm⁻¹. The result reveals the enhancement of the electrical conductivity with γ-irradiation. FT-IR study signifies the intermolecular hydrogen bonding between Fe³⁺ ions of FeCl₃ with OH group of PVA.     

Study of La0.8Sr0.2Co0.2Cr0.8O3 − δ as a candidate coating material for the positive current collector in Na/S battery

Perovskite La_0.8Sr_0.2Co_0.2Cr_0.8O_3 − δ (LSCC) ceramic synthesized by the conventional ceramic processing technique was studied as a novel coating material for the cathode current collector in Na/S battery. Its structure, electrical conductivity, density and thermal expansion coefficient (TEC) were investigated. The corrosion performance of LSCC was in particular evaluated by electrochemical techniques in combination with long-term dip-immersion tests. The results indicated that LSCC exhibited excellent corrosion resistance in molten sodium tetrasulfide at 350 °C. The corrosion current density i_corr (0.081 mA cm^− 2) was much lower than that of 316 L stainless steel by approximately two orders of magnitude. The corrosion rate of LSCC deduced from immersion test was as low as about 12 μm year^− 1.     

A nanogravimmetric investigation of the charging processes on ruthenium oxide thin films and their effect on methanol oxidation

The charging processes and methanol oxidation that occur during the oxidation-reduction cycles in a ruthenium oxide thin film electrode (deposited by the sol-gel method on Pt covered quartz crystals) were investigated by using cyclic voltammetry, chronoamperometry and electrochemical quartz crystal nanobalance techniques. The ruthenium oxide rutile phase structure was determined by X-ray diffraction analysis. The results obtained during the charging of rutile ruthenium oxide films indicate that in the anodic sweep the transition from Ru(II) to Ru(VI) occurs followed by proton de-intercalation. In the cathodic sweep, electron injection occurs followed by proton intercalation, leading to Ru(II). The proton intercalation/de-intercalation processes can be inferred from the mass/charge relationship which gives a slope close to 1 g mol⁻¹ (multiplied by the Faraday constant) corresponding to the molar mass of hydrogen. From the chronoamperometric measurements, charge and mass saturation of the RuO₂ thin films was observed (440 ng cm⁻²) during the charging processes, which is related to the total number of active sites in these films. Using the electrochemical quartz crystal nanobalance technique to study the methanol oxidation reaction at these films was possible to demonstrate that bulk oxidation occurs without the formation of strongly adsorbed intermediates such as CO_ads, demonstrating that Pt electrodes modified by ruthenium oxide particles can be promising catalysts for the methanol oxidation as already shown in the literature.     

Collective dynamics of supercritical water

Inelastic X-ray scattering experiments on sub- and supercritical water were performed to investigate collective dynamics of this unique solvent. Analysis within a generalized Langevin formalism shows that the positive dispersion of the sound velocity, as compared to the hydrodynamic value, first decreases (1.0<ρ<0.8 g cm⁻³) at all measured momentum transfers (1.3-10.7 nm⁻¹), and then increases (0.7<ρ<0.26 g cm⁻³) again only at higher momentum transfers. We suggest the initial decrease is due to approaching the percolation limit in the number of hydrogen bonds, and the subsequent increase is due to the formation of rigid dimers in sub- and supercritical water.