A novel salicylate-selective electrode based on a Sn(IV) complex of salicylal-imino acid Schiff base

A novel poly(vinyl chloride) membrane electrode with high selectivity toward salicylate (Sal^–), based on the use of the salicylal-imino acid Schiff base dibenyl complex of Sn(IV) [Sn(IV)-SIADBen] as ionophore is described. The influence of lipophilic charged additives on the performance of the electrode was studied. The results suggested that Sn(IV)-SIADBen according to a positively-charged carrier mechanism. The influence of several other variables was investigated in order to optimize the potentiometric response and selectivity of the electrode. The electrode based on Sn(IV)-SIADBen, with 30.44 wt% PVC, 64.55 wt% plasticizer [dioctyl phthalate (DOP)], 3.81 wt% ionophore, and 1.2 wt% anionic additive exhibited a linear response for the Sal^– ion over the concentration range 1.0×10^–1 to 2.5×10^–6 mol l^–1, and displayed an anti-Hofmeister selectivity sequence as follows: salicylate perchlorate > thiocyanate > benzoate > iodide > nitrate > chloride > nitrite acetate > citrate > sulfate. UV-Visible absorption spectra were used to examine the specific interaction of salicylate with the ionophore. The electrode was applied to clinical medical analysis, and the results obtained were consistent with those obtained by conventional methods.     

以单环有机锡配合物为载体的水杨酸根阴离子选择电极的研究

Two new cyclic pentacoordinative organotin(Ⅳ) complexes, 2,4-dihydroxyacetophenone tribenzyltin(HAPTBT) and 2,4-dihydroxyacetophenone triphenyltin(HAPTPT) were synthesized and used as anion ionophore for PVC membrane electrode. The new electrodes exhibit specificity selectivity for salicylate. The electrode based on HAPTBT as a neutral carrier displays a highly potentiometric response to salicylate and an anti-Hofmeister selectivity sequence in the following order: Sal^- ＞ SCN^- ＞ I^- ＞ NO₂^- ＞ Br^- ＞ Cl^- ＞ ClO₄^- ＞ NO₃^- ＞ SO₄^2-. The electrode has the advantages of fast response, stability and reproducibility, simplicity. The response mechanism is discussed in view of UV spectroscopy technique. The results show that there are close relationship between the potentiometric response characteristics and structure of organotin(Ⅳ) complexes. The electrode was applied to medicine analysis with satisfactory results.     

Highly selective thiocyanate electrode based on bis-[N-(2-hydroxyethyl)salicylaldimino]copper(II) complex as a neutral carrier.

A novel selective thiocyanate electrode of a PVC membrane based on bis-[N-(2-hydroxyethyl)salicylaldimino]copper(II) [Cu(II)-BNSDM] as a neutral carrier is reported. The selectivity sequence of this electrode is as follows: SCN- > ClO4- > I- > Sal- > Br- > NO2- > Cl- > NO3- > H2PO4- > SO4(2-), which is an anti-Hofmeister selectivity sequence. The electrode exhibits a Nernstian potential linear range to thiocyanate from 1.0 x 10(-1) to 6.0 x 10(-6) mol/L with a detection limit of 2.0 x 10(-6) mol/L and a slope of (-59.0+/-0.2)mV/decade in pH 5.0 of a phosphate buffer solution at 25 degrees C. Electrochemical impedance spectroscopy (EIS) and UV spectroscopy techniques were performed to understand the response mechanism of the electrode. The electrode had the advantage of simplicity, high selectivity, fast response and low detection limit compared with the other electrode, which had been reported before. The electrode had been applied to wastewater analysis, and the obtained results were satisfactory.     

A new lead(II)-selective PVC-coated graphite rod electrode based on a Schiff base complex.

A new lead(II)-selective electrode has been developed based on bis(acetylacetone)-p-phenylenediamine-lead(II) [LPb(NO3)2]H2O complex ionophore as a sensing material, dioctylphthalate (DOP) as a solvent mediator and PVC as a matrix. This electrode exhibits a linear Nernstian response over the concentration range of 1 x 10(-5)-1 x 10(-1) mol l(-1) of Pb(II) cation, with a cationic calibration slope of 30.0 +/- 0.2 mV/concentration decade and a detection limit of 2 x 10(-6) mol l(-1) (0.40 ppm). It has a fast response time and can be used for a period of 2 months without any divergence in potentials. The proposed electrode reveals a good selectivity for Pb(II) over a wide variety of other tested cations and could be used in the pH range of 4-8. It was successfully used for direct determination of Pb(II) concentration in some samples. The obtained results show a good agreement with those obtained by an atomic absorption spectrometric method. The average recovery obtained is 96.5 +/- 0.5% with standard deviation of 1.2% (n = 8).     

Determination of salicylate in blood serum using an amperometric biosensor based on salicylate hydroxylase immobilized in a polypyrrole-glutaraldehyde matrix

The use of an amperometric biosensor for the salicylate determination in blood serum is described. The biosensor is based on salicylate hydroxylase (EC 1.14.13.1) electropolymerized onto a glassy carbon-working electrode with polypyrrole and glutaraldehyde, to improve the biosensor lifetime. The hexacyanoferrate (II) was also incorporated to work as a redox mediator to minimize possible interferences. The salicylate is enzymatically converted to catechol, which is monitored amperometrically by its electrooxidation at+0.170 V versus SCE (saturated calomel electrode). Salicylate determination was carried out maintaining the ratio between beta-NADH and salicylate at 4:1 (30 degrees C). The amperometric response of the biosensor was linearly proportional to the salicylate concentration between 2.3x10(-6) and 1.4x10(-5) mol l(-1), in 0.1 mol l(-1) phosphate buffer (pH 7.8), containing 0.1 mol l(-1) KCl and 5.0x10(-4) mol l(-1) Na(2)H(2)EDTA, as supporting electrolyte. The recovery studies, in the presence of several interfering compounds, showed recoveries between 96.4 and 104.8%. The useful lifetime of the biosensor in the concentration range evaluated was at least 40 days, in continuous use. Blood serum samples analyzed by this biosensor showed a good correlation compared to the spectrophotometric method (Trinder) used as reference, presenting relative deviations lower than 7.0%.     

Binuclear Schiff base complex of manganese(III) as a neutral carrier for a highly selective iodide electrode.

A new highly selective iodide electrode incorporating a binuclear manganese(III) complex, bis(salicylaldehyde-aminopropanol)dichloroaceticdimanganese(III) [Mn(III)(2)-BSAPDCA], as a neutral carrier is described. The electrode displays an anti-Hofmeister selectivity sequence: iodide > perchlorate > salicylate > thiocyanate > nitrate > bromide > nitrite > chloride > sulfate. The excellent selectivity for iodide is related to a direct interaction between the central Mn(III) atom and iodide and a steric effect associated with the structure of the carrier, which is supported by UV spectroscopy and AC impedance techniques. The electrode exhibits a near-Nernstian potentiometric linear response range to iodide from 1.0 x 10(-1) to 2.0 x 10(-5) mol/L with a detection limit of 8.0 x 10(-6) mol/L and a slope of -60.3 mV/decade in pH 3.0 of phosphate buffer solutions at 20 degrees C. From a comparison of the potentiometric response characteristics between a binuclear manganese(III) complex, Mn(III)(2)-BSAPDCA, and a mononuclear manganese(III) complex, Mn(III)-BSAPB, an enhanced response towards iodide from a binuclear metallic complex-based electrode was observed. The electrode, based on binuclear manganese(III) complex, was successfully applied to the determination of inorganic total iodine in iodized table salt with satisfactory results.     

Salicylate ion-selective electrode based on new tetranuclear copper complexes of O-vannlin-methionine as neutral carriers.

A new salicylate-selective PVC membrane electrode based on a new Schiff base tetranuclear copper complex of O-vannlin-methionine (Cu(II)(4)-TVM) as a neutral carrier is described. This electrode displays a preferential potentiometric response to salicylate and an anti-Hofmeister selectivity sequence in the following order: Sal(-) > ClO(4)(-) > SCN(-) > I(-) > NO(2)(-) > NO(3)(-) > Br(-) > Cl(-) > SO(3)(2-) > SO(4)(2-) > H(2)PO(4)(-). The electrode exhibits near-Nernstian potential linear range of 1.5 x 10(-6)-1.0 x 10(-1) M with a detection limit of 8.0 x 10(-7) M and a slope of -56.3 mV/decade in pH 3.0-8.0 of phosphorate buffer solution at 20 degrees C. Thanks to the tetranuclear copper(II) in the carrier, the electrode has the advantages of simplicity, fast response, fair stability and reproducibility and low detection limit. The response mechanism to the electrodes is discussed by the a.c. impedance technique and the UV spectroscopy technique. The electrode can be applied to analyses of medicine and the results obtained are in fair agreement with the results given by a standard method.     

New cesium ion-selective electrodes based on anilino-(1,3-dioxo-2-indanylidene) acetonitrile derivatives

Cesium ion-selective PVC membrane electrodes based on anilino-(1,3-dioxo-2-indanylidene) acetonitrile derivatives as a novel class of neutral ionophores were examined. The ionophores were p-methoxyanilino-(1,3-dioxo-2-indanylidene) acetonitrile, p-methylanilino-(1,3-dioxo-2-indanylidene) acetonitrile and p-N,N-dimethylanilino-(1,3-dioxo-2-indanylidene) acetonitrile. The anilino-(1,3-dioxo-2-indanylidene) acetonitrile proved to work well with cesium, the corresponding electrodes display a response to this ion. The most favourable ionophore was p-methoxyanilino-(1,3-dioxo-2-indanylidene) acetonitrile, especially when the secondary ion exchanger potassium tetrakis (4-chlorophenyl) borate was incorporated in 2-nitrophenyl octyl ether for ion-selective electrode membrane construction. The response function was linear within the concentration range 10(-1)-2.5x10(-5) mol l(-1) and the slope was 52 mV decade(-1). The detection limit remained at 6.3x10(-6) mol(-1). The selectivity and response time of the electrode was studied and it was found that the electrode exhibited good selectivity for cesium over alkali, alkaline earth and some transition metal ions. The electrode response was stable over a wide pH range. The lifetime of the electrode was about 1 month.     

Nitrate-selective membrane electrode based on bis(2-hydroxyanil)acetylacetone lead(II) neutral carrier.

A nitrate-selective electrode based on a recently synthesized bis(2-hydroxyanil)acetylacetone lead(II) complex [(haacac)Pb] has been developed. Among different compositions studied, a membrane containing 30.7% poly(vinyl chloride) (PVC), 61.3% dibutyl phthalate (DBP) as a plasticizer, 3% methyltrioctylammonium chloride (MTOAC) as a cationic additive and 5% ionophore (all w/w) exhibited the best potentiometric response toward nitrate ion in aqueous solutions. The potentiometric response of the electrode was linear with a Nernstian slope of -58.8 mV decade(-1) within the NO3- concentration range of 2 x 10(-5)-1 x 10(-1) mol dm(-3). The response time of the electrode was < or =10 s over the entire linear concentration range of the calibration plot. The electrode is suitable for use within the pH range of 5.3-11. The selectivity coefficients for the proposed electrode were improved for some interferences, when compared with those of commercially available nitrate-selective electrodes.     

Highly selective PVC-membrane electrodes based on Co(II)-Salen for determination of nitrite ion.

A cobalt(II) derivative was used as a suitable ionophore for the preparation of a polymeric membrane nitrite-selective electrode. The electrode reveals a Nemstian behavior over a very wide NO2- ion concentration range (1.0 x 10(-6)-1.0 x 10(-1) M) and a very low detection limit (5.0 x 10(-7) M). The potentiometric response is independent of the pH of solution in the pH range 4.0-9.5. The electrode shows advantages such as low resistance, fast response and, most importantly, good selectivity relative to a wide variety of inorganic and organic anions. In fact, the selectivity behavior of the proposed NO2- ion-selective electrode shows great improvements compared to the previously reported electrodes for nitrite ion. The proposed electrodes could be used for at least 2 months without any significant changes in potentials. The electrode was successfully applied to the determination of nitrate ion concentrations in sausage and milk samples.     

Ion-selective electrode for aluminum determination in pharmaceutical substances, tea leaves and water samples

A novel ion-selective PVC membrane sensor for Al(III) ions based on 6-(4-nitrophenyl)-2-phenyl-4-(thiophen-2-yl)-3,5-diaza-bicyclo[3.1.0]hex-2-ene (NTDH) as a new ionophore has been prepared and studied. The electrode exhibit a good response for aluminum ion over concentration range of 1.0x10(-6) to 1.0x10(-1) mol L(-1) with a Nernstian slope of 19.6+/-0.4 mV per decade and low detection limit of 6.3x10(-7) mol L(-1). The best performance was obtained with membrane composition 30% poly(vinyl chloride), 62% acetophenone, 5% oleic acid, 3% ionophore and 2 ml tetrahydrofuran. NTDH-based electrode was suitable for aqueous solutions of pH 3. It has relatively fast response time (approximately 10 s) and can be used at least for 3 months without any considerable divergence in potentials. The proposed membrane electrode revealed good selectivity for Al(III) ions over a wide variety of other cations. The standard electrode potentials were determined at different temperatures and used to calculate the isothermal coefficient of the electrode. The formation constant and stoichiometry ratio of ionophore-Al(III) complex were calculated at 25 degrees C by using segmented sandwich membrane method. It was used in non-aqueous solvents and also as indicator electrode in potentiometric determination of Al(III) ions in some real samples.     

The synthesis and membrane transport characteristics of macrocyclic polyether ligands composed of 1,10-phenanthroline as carriers for primary amine species

Four macrocyclic polyether derivatives of o-phenanthroline were synthesized and used as neutral carriers for preparing poly(vinyl chloride) (PVC) membrane electrodes to sense primary amine species. The potentiometric response characteristics of the electrodes prepared were investigated. The electrode sensitive to benzyl amine as model analyte showed a linear response range of 8.0 x 10(-6)-0.1 mol/l with a detection limit of 8.9 x 10(-7) mol/l and a slope of 56.5 mV/decade. The linear potentiometric response of the mexiletine-sensitive electrode was 4.7 x 10(-6)-0.1 mol/l, and the detection limit was 5.0 x 10(-7)1 mol/l with a slope of 59.0 mV/decade. The transfer behavior of amines and ammonium ions through an organic phase was investigated by means of the bulk liquid membrane transport experiment. The effects of pH, counter anions and other factors on the transfer of the amine and ammonium species were studied. The mass transfer rates of the test species facilitated by macrocyclic polyether derivatives of o-phenanthroline were determined and the following sequence was found: benzyl amine > ethyl amine > tetramethyl ammonium > triethyl amine > diethyl amine > K(+) > ammonium > Na(+) > Ca(2+) > Mg(2+). This was exactly the potentiometric selectivity sequence of the membrane electrodes prepared by using these carriers. The mechanism of transfer of benzyl amine through a membrane phase induced by the carriers has been elucidated on the basis of experimental observations.     

Use of Tin (IV) Porhyrins as Ionophores for the Construction of Phthalate‐Selective Electrodes: Influence of the Structure and Membrane Composition on their Response Properties

Tin(IV) porphyrins derivatives were used as ionophores for phthalate selective electrodes preparation. The influence of ionophore structure and membrane composition (amount of incorporated ionic sites) on the electrode response, selectivity and long‐term stability were studied. Poly(vinyl chloride) polymeric membranes plasticized with o‐NPOE (o‐nitrophenyloctylether) and containing Sn(IV)‐tetraphenylporphyrin (TPP) dichloride (Sn(IV)[TPP]Cl₂) or Sn(IV)‐octaethylporphyrin (OEP) dichloride (Sn(IV)[OEP]Cl₂), and in some cases incorporating lipophilic cationic (tetraocthylammonium bromide ‐ TOABr) and anionic (sodium tetraphenylborate – NaTPB and potassium tetrakis[3,5‐bis(trifluoromethyl)phenyl]borate‐KTFPB) additives, were prepared and their potentiometric characteristics compared. Both ionophores are shown to operate via a neutral mechanism, and the addition of 10 mol % of lipophilic quaternary ammonium salt derivative to the membrane is required to achieve optimal electrode performance. The potentiometric units prepared, with Sn(IV)[TPP]Cl₂ (Type A) or Sn(IV)[OEP]Cl₂ (Type B) without additives, presented a slope of ?52.8 mV dec^?1 and ?58.8 mV dec^?1 and LLLR of 9.9×10^?5 mol L^?1 and 9.9×10^?6 mol L^?1, respectively. The units prepared using the same metalloporphyrins and incorporating 10% mol TOABr presented a slope of ?55.0 mV dec^?1 and ?57.8 mV dec^?1 and LLLR of 5.0×10^?7 mol L^?1 and 3.0×10^?7 mol L^?1. Their analytical usefulness was assessed by potentiometric determinations of phthalate in water and industrial products providing results that presented recoveries of about 100%.     

A chitosan-multiwall carbon nanotube modified electrode for simultaneous detection of dopamine and ascorbic acid.

A chemically modified electrode based on a chitosan-multiwall carbon nanotube (MWNT) coated glassy carbon electrode (GCE) is described, which exhibits an attractive ability to determine dopamine (DA) and ascorbic acid (AA) simultaneously. The modified electrode exhibited a high differential pulse voltammetry (DPV) current response to DA at 0.144 V and AA at -0.029 V (vs. SCE) in a 0.1 mol l(-1) phosphate buffer solution (pH = 7.2). The properties and behaviors of the chitosan-multiwall carbon nanotube modified electrode (MC/GCE) were characterized using cyclic voltammetry (CV) and DPV methods. The mechanism for the discrimination of dopamine from ascorbic acid at MC/GCE is discussed. The linear calibration range for DA and AA were 5 x 10(-7) mol l(-1) to 1 x 10(-4) mol l(-1) (r = 0.997), and 5 x 10(-6) mol l(-1) to 1 x 10(-3) mol l(-1) (r = 0.996), respectively. The MC/GCE showed good sensitivity, selectivity and stability.     

A coated wire-type lead(II) ion-selective electrode based on a phosphorylated calix[4]arene derivative.

The preparation of a lead-selective electrode based on 5,11,17,23-tetra-tert-butyl-25,26,27,28-tetrakis-(diphenylphosphinoylmethoxy)calix[4]arene (1) as an ionophore is reported. The plasticized PVC membrane containing 30% PVC, 57% ortho-nitrophenyloctylether (NPOE), 4% sodium tetraphenylborate (NaTPB) and 9% ionophore 1 was directly coated on a graphite electrode. It exhibits a nearly Nernstian slope of 28.0 +/- 0.2 mV decade(-1) over a concentration range of 1 x 10(-5) - 1 x 10(-2) mol dm(-3) with a detection limit of 1.4 x 10(-6) mol dm(-3). The response time of the electrode was found to be ca. 17 s. The potential of the sensor was independent of the pH variation in the range 3.5 - 5.0. The selectivity of the electrode performance towards lead ions over Th4+, La3+, Sm3+, Dy3+, Y3+, Ca2+, Sr2+, Cd2+, Mn2+, Zn2+, Ni2+, Co2+, NH4+ Ag+, Li+, Na+ and K+ ions was investigated. The prepared electrode was used successfully as an indicator electrode for a potentiometric titration of a lead solution using a standard solution of EDTA. The applicability of the sensor for Pb2+ measurements in various synthetic water samples spiked with lead nitrate was also checked.     

Novel Membrane Potentiometric Thiocyanate Sensor Based on Tribenzyltin(IV) Dithiocarbamate

A novel PVC membrane ion‐selective electrode based on tribenzyltin(IV) dithiocarbamate [Sn(IV)–TBDTB] as neutral carrier was developed for thiocyanate (SCN^?) determination. The electrode exhibits a near‐Nernstian response for SCN^? with a slope of 62.8±2.0 mV per decade over a wide concentration range 1.0×10^?1–2.0×10^?6 mol L^?1 and a detection limit of 1.0×10^?6 mol L^?1 in MES–NaOH buffer, pH 6.0, at 25 °C. The electrode prepared with 1.5 wt.% Sn(IV)–TBDTB, 32.5 wt.% PVC and 66.0 wt.% 2‐nitrophenyloctyl ether (o‐NPOE) shows optimal response characteristics. Anti‐Hofmeister selectivity sequence for a series of anions shown by the electrode was as follows: SCN^?>Sal^?>I^?>ClO >phCOO^?>CH₃COO^?>Br^?>Cl^?>NO >NO >Citrate>SO₄^2?. The useful pH range for the electrode was found to be 3–7 with a response time 30–40 s. The electrode has been used for direct determination of thiocyanate in wastewater with satisfactory results.     

Salicylate-selective electrode based on lipophilic tin(IV)phthalocyanine

A new PVC membrane electrode based on lipophilic (2,9,16,23-tetra-tert-butylphthalocyanine)tin(IV) dichloride which demonstrates excellent selectivity and fast response toward the salicylate ion is described. The membrane electrode displayed a linear response for salicylate in the concentration range 10(-5)-0.1 M and exhibited an antiHofmeister pattern, with high selectivity for salicylate compared with lipophilic inorganic and biologically important organic anions. The electrode was successfully applied to the determination of salicylate in pharmaceutical preparations and biological samples.     

Ion-selective electrodes for anionic surfactants using a cyclam derivative as ionophore

The cyclam derivative 1,4,8,11-tetra(n-octyl)-1,4,8,11-tetraazacyclotetradecane (L) has been used as carrier for the preparation of PVC-based membrane ion-selective electrodes for anionic surfactants. Different membranes were prepared using L as ionophore, tetra-n-octylammonium bromide (TOAB) as cationic additive and dibutyl phthalate (DBP) or o-nitrophenyl octyl ether (NPOE) as plasticizers. The final used electrode contained a membrane of the following composition: 56% DBP, 3.4% ionophore, 3.8% TOAB and 36.8% PVC. This electrode displays a Nernstian slope of -60.0+/-0.9 mV/decade in a 2.0 x 10(-3) to 7.9 x 10(-6) mol dm(-3) concentration range and a limit of detection of 4.0 x 10(-6) mol dm(-3). The electrode can be used for 144 days without showing significant changes in the value of slope or working range. The electrode shows a selective response to dodecyl sulfate (DS-) and a poor response to common inorganic cations and anions. The selective sequence found was DS->ClO4->HCO3->SCN->NO3- approximately CH3COO- approximately I->Cl->Br->IO3- approximately NO2- approximately SO3(2-)>HPO4(2-)>C2O4(2-)>SO4(2-), i.e. basically following the Hoffmeister series except for the hydrophilic anion bicarbonate. Most of the potentiometric coefficients determined are relatively low indicating that common anions would not interfere in the DS- determination. A complete study of the response of the electrode to a family of surfactant was also carried out. The electrode showed a clear anionic response to DS- and to Na-LAS and a much poorer response to other anionic surfactants and to non-ionic surfactants. Also the electrode shows certain non-linear cationic response in the presence of cationic and zwitterionic surfactants. The electrode was used for the determination of anionic surfactants in several mixtures, and the results obtained were compared to those found using a commercially available sensor.     

Tetrabenzyl pyrophosphate as a new class of neutral carrier responsive to lead ion

Tetrabenzyl pyrophosphate and diphenylphosphinic anhydride, with two phosphoryl groups (PO) as ligating sites, can be used as novel ionophores to make Pb(2+)-selective membrane electrodes. A good result was obtained with tetrabenzyl pyrophosphate, and the electrode based on this ionophore and bis(1-butylpentyl) adipate as a solvent mediator in a poly(vinyl chloride) membrane matrix exhibited a near-Nernstian response to Pb(2+) in the concentration range of 1x10(-5)-1x10(-2) M with a slope of 28.7 mV per concentration decade in a solution containing 0.1 M Mg(NO(3))(2). The limit of detection was 3x10(-6) M. The selectivity of this electrode to other metal cations was comparable to the best case in many Pb(2+)-selective electrodes so far developed. Addition of potassium tetrakis(p-chlorophenyl)borate (40 mol% relative to tetrabenzyl pyrophosphate) caused a drastic change in the response slope (53.3 mV per concentration decade), probably due to the formation of PbA(+), where A stands for anions present in the sample solution, and decreased significantly the electrode selectivity to other metal cations.     

Potentiometric performance of silver ion-selective electrodes based on tridentate Schiff base derivatives.

To examine the directivity for improving the silver ion discrimination ability of a Schiff base, three kinds of tridentate ligands were synthesized and compared with the similar quadridentate ligand as the silver ionophore. Among the Schiff base derivatives tested, 3-(2-pyridylethylimino)-2-butanoneoxime, having one oxime and a pyridine substituent, was found to be the best ionophore for a silver-ion electrode. The electrode based on this derivative exhibited good silver-ion selectivity, -log Kpot(Ag+,K+) = 3.8, comparable to that of a quadridentate Schiff base, N,N'-bis(2'-hydroxyimino-1'-phenylpropyleden)-1,3-propanediamine, reported previously, except for a pseudo Nernstian response (35.6 mV decade(-1)) with a wide silver-ion activity change in the activity change from 5.0 x 10(-7) to 7.9 x 10(-2) mol dm(-3).