Computer-aided cooling curve thermal analysis of near eutectic Al–Si–Cu–Fe alloy

The effects of bismuth (Bi), antimony (Sb) and strontium (Sr) additions on the characteristic parameters of the evolution of aluminium dendrites in a near eutectic Al–11.3Si–2Cu–0.4Fe alloy during solidification at different cooling rates (0.6–2 °C) were investigated by computer-aided cooling curve thermal analysis (CA-CCTA). Nucleation temperature ( $ T_{\text{N}}^{{\alpha {\text{ - Al}}}} $ ) is defined with a new approach based on second derivative cooling curve. The results showed that $ T_{\text{N}}^{{\alpha {\text{ - Al}}}} $ increased with increasing cooling rate but both the growth temperature ( $ T_{\text{G}}^{{\alpha {\text{ - Al}}}} $ ) and the coherency temperature (T _DCP) decreased. Increase in the temperature difference for dendrite coherency ( $ T_{\text{N}}^{{\alpha {\text{ - Al}}}} - T_{\text{DCP}} $ ) with increasing cooling rate indicate a wider range of temperature before the dendrite can impinge on each other and higher fraction solid ( $ f_{\text{S}}^{\text{DCP}} $ ). Additions of Bi, Sb and Sr to the base alloy produced only a minor effect on $ T_{\text{N}}^{{\alpha {\text{ - Al}}}} $ . Additions of Bi and Sb resulted in an increase in fraction solid and an increase of 30 % in the value of $ T_{\text{N}}^{{\alpha {\text{ - Al}}}} \, - \,T_{\text{G}}^{{\alpha {\text{ - Al}}}} $ to almost 13 °C.     

Thermal analysis, phase transitions and molecular reorientations in [Sr(OS(CH3)2)6](ClO4)2

Thermal analysis (TG/DTG/QMS), performed for [Sr(OS(CH₃)₂)₆](ClO₄)₂ in a flow of argon and in temperature range of 295–585 K, indicated that the compound is completely stable up to ca. 363 K, and next starts to decompose slowly, and in the temperature at ca. 492 K looses four (CH₃)₂SO molecules per one formula unit. During further heating [Sr(DMSO)₂](ClO₄)₂ melts and simultaneously decomposes with explosion. Differential scanning calorimetry (DSC) measurements performed in the temperature range of 93–370 K for [Sr(DMSO)₆](ClO₄)₂ revealed existence of the following phase transitions: glass ? crystal phase Cr5 at T _g  ≈ 164 K (235 K), phase Cr5 → phase Cr4 at $ T_{\text{c6}}^{\text{h}} $  ≈ 241 K, phase Cr4 → phase Cr3 at $ T_{\text{c5}}^{\text{h}} $  ≈ 255 K, phase Cr3 → phase Cr2 at $ T_{\text{c4}}^{\text{h}} $  ≈ 277 K, phase Cr2 ? phase Cr1 at $ T_{\text{c3}}^{\text{h}} $  ≈ 322 K and $ T_{\text{c3}}^{\text{c}} $  ≈ 314 K, phase Cr1 ? phase Rot2 at $ T_{\text{c2}}^{\text{h}} $  ≈ 327 K and $ T_{\text{c2}}^{\text{c}} $  ≈ 321 K and phase Rot2 ? phase Rot1 at $ T_{\text{c1}}^{\text{h}} $  ≈ 358 K and $ T_{\text{c1}}^{\text{c}} $  ≈ 347 K. Entropy changes values of the phase transitions at $ T_{\text{c1}}^{\text{h}} $ and $ T_{\text{c2}}^{\text{h}} $ (?S ≈ 79 and 24 J mol^?1 K^?1, respectively) indicated that phases Rot1 and Rot2 are substantially orientationally disordered. The solid phases (Cr1–Cr5) are more or less ordered phases (?S ≈ 7, 10, 4 and 3 J mol^?1 K^?1, respectively). Phase transitions in [Sr(DMSO)₆](ClO₄)₂ were also examined by Fourier transform middle infrared spectroscopy (FT-MIR). The characteristic changes in the FT-MIR absorption spectra of the low- and high-temperature phases observed at the phase transition temperatures discovered by DSC allowed us to relate these phase transitions to the changes of the reorientational motions of DMSO ligands and/or to the crystal structure changes.     

Volumetric Properties of the Nucleoside Thymidine in Aqueous Solution at T = 298.15 K and p = (10 to 100) MPa

Sound speeds have been measured for aqueous solutions of the nucleoside thymidine at T = 298.15 K and at the pressures p = (10, 20, 40, 60, 80, and 100) MPa. The partial molar volumes at infinite dilution, $ V_{2}^{\text{o}} $ , the partial molar isentropic compressions at infinite dilution, $ K_{S,2}^{\text{o}} $ , and the partial molar isothermal compressions at infinite dilution, $ K_{T,2}^{\text{o}} $ $ \{ K_{T,2}^{\text{o}} = - (\partial V_{2}^{\text{o}} /\partial p)_{T} \} $ , have been derived from the sound speeds at elevated pressures using methods described in our previous work. The $ V_{2}^{\text{o}} $ and $ K_{T,2}^{\text{o}} $ results were rationalized in terms of the likely interactions between thymidine and the aqueous solvent. The $ V_{2}^{\text{o}} $ results were also compared with those calculated using the revised Helgeson–Kirkham–Flowers (HKF) equation of state.     

Synergistic extraction of europium and americium into nitrobenzene by using hydrogen dicarbollylcobaltate and bis(diphenylphosphino)methane dioxide

Extraction of microamounts of europium and americium by a nitrobenzene solution of hydrogen dicarbollylcobaltate (H⁺B^?) in the presence of bis(diphenylphosphino)methane dioxide (DPPMDO, L) has been investigated. The equilibrium data have been explained assuming that the species $ {\text{HL}}^{ + } $ , $ {\text{HL}}_{2}^{ + } $ , $ {\text{ML}}_{2}^{3 + } $ , $ {\text{ML}}_{3}^{3 + } $ and $ {\text{ML}}_{4}^{3 + } $ (M³⁺ = Eu³⁺, Am³⁺) are extracted into the organic phase. The values of extraction and stability constants of the species in nitrobenzene saturated with water have been determined. It was found that the stability constants of the corresponding complexes $ {\text{EuL}}_{n}^{3 + } $ and $ {\text{AmL}}_{n}^{3 + } $ , where n = 2, 3 and L is DPPMDO, in water–saturated nitrobenzene are comparable, whereas in this medium the stability of the cationic species $ {\text{AmL}}_{4}^{3 + } $ (L = DPPMDO) is somewhat higher than that of $ {\text{EuL}}_{4}^{3 + } $ with the same ligand L.     

Isothermal crystallization kinetics of poly(trimethylene terephthalate)/multiwall carbon nanotubes composites

The isothermal crystallization kinetics of poly(trimethylene terephthalate) (PTT) in the presence of varying amounts of multiwall carbon nanotubes (MWCNT) have been investigated using differential scanning calorimetry (DSC) and analyzed using Avrami and secondary nucleation theory. Polarized light microscopy (PLM) was used to study the crystal morphology of PTT/MWCNT composites. The results showed that the presence of MWCNTs in PTT acted as an effective nucleating agents and lead to the spherulitic morphology. The decrease in the spherulites size on MWCNT addition was observed by polarized light microscopy. Using values of transport parameters ( $ U* = 1500{\text{ cal mol}}^{ - 1} , \, \Updelta T =T_{\text{g}} - 30\, $ °C) together with experimentally determined values of equilibrium melting temperature [ $ T^{\text{o}}_{\text{m}} $ (245.2 °C)] and glass transition temperature [ $ T_{\text{g}} $ (45 °C)], the nucleation parameter, $ K_{\text{g}} $ and $ \sigma_{\text{e}} $ were determined for PTT and PTT/MWCNT composites according to Lauritzen–Hoffman theory. The decrease in the values of these parameters on MWCNT addition is in agreement with the fact that the rate of crystallization of PTT increased in the presence of MWCNTs.     

Densities and Volumetric Properties of Butyl Acrylate + 1-Butanol, or +2-Butanol, or +2-Methyl-1-propanol, or +2-Methyl-2-propanol Binary Mixtures at Temperatures from 288.15 to 318.15 K

The densities, ρ, of binary mixtures of butyl acrylate with 1-butanol, 2-butanol, 2-methyl-1-propanol, and 2-methyl-2-propanol, including those of the pure liquids, were measured over the entire composition range at temperatures of (288.15, 293.15, 298.15, 303.15, 308.15, 313.15, and 318.15) K and atmospheric pressure. From the experimental data, the excess molar volume $ V_{\text{m}}^{\text{E}} $ V m E , partial molar volumes $ \overline{V}_{\text{m,1}} $ V ¯ m,1 and $ \overline{V}_{\text{m,2}} $ V ¯ m,2 , and excess partial molar volumes $ \overline{V}_{\text{m,1}}^{\text{E}} $ V ¯ m,1 E and $ \overline{V}_{\text{m,2}}^{\text{E}} $ V ¯ m,2 E , were calculated over the whole composition range as were the partial molar volumes $ \overline{V}_{\text{m,1}}^{^\circ } $ V ¯ m,1 ° and $ \overline{V}_{\text{m,2}}^{^\circ } $ V ¯ m,2 ° , and excess partial molar volumes $ \overline{V}_{\text{m,1}}^{{^\circ {\text{E}}}} $ V ¯ m,1 ° E and $ \overline{V}_{\text{m,2}}^{{^\circ {\text{E}}}} $ V ¯ m,2 ° E , at infinite dilution,. The $ V_{\text{m}}^{\text{E}} $ V m E values were found to be positive over the whole composition range for all the mixtures and at each temperature studied, indicating the presence of weak (non-specific) interactions between butyl acrylate and alkanol molecules. The deviations in $ V_{\text{m}}^{\text{E}} $ V m E values follow the order: 1-butanol < 2-butanol < 2-methyl-1-propanol < 2-methyl-2-propanol. It is observed that the $ V_{\text{m}}^{\text{E}} $ V m E values depend upon the position of alkyl groups in alkanol molecules and the interactions between butyl acrylate and isomeric butanols decrease with increase in the number of alkyl groups at α-carbon atom in the alkanol molecules.     

Transport of Water by Group 1 and 2 Ions with t-Butyl Alcohol as Reference Substance: Comparison with Raffinose and Dioxan

Measurement of the transport of water with respect to the second solvent component in a binary aqueous mixture gives the Washburn number, $ w_{\text{W}} = (n_{\text{W}} )_{ + } t_{ + } - (n_{\text{W}} )_{ - } t_{ - } $ , in a transport number determination, where the ions move in opposite directions, and give the Erdey–Grúz number, $ \Upsigma n_{\text{W}} = (n_{\text{W}} )_{ + } + (n_{\text{W}} )_{ - } $ , in a diffusion experiment, where the ions move in the same direction. Here n _W and t are the number of water molecules and transport number, respectively, of the anion or cation. Combination of the results of these two experiments allows unambiguous determination of values for the solvent transport numbers, $ n_{\text{W}} $ , of the individual ions. While the values of $ n_{\text{W}} $ depend on the cosolvent, at high dilutions of the second component the highest value of $ n_{\text{W}} $ found, $ N_{\text{W}} $ , should approach the number of water molecules transported by the ion in pure water, $ N_{\text{W}}^{0} $ . New data for alkali-metal, alkaline-earth metal, hydrogen and halide ions in dilute mixtures of t-butyl alcohol with water are presented. Values of $ N_{\text{W}} $ rounded to whole numbers thus found are: 12 (Li⁺), 10 (Na⁺), 6 (K⁺), 5 (Rb⁺), 5 (Cs⁺), 1 (H⁺), 13 (Ca²⁺), 16 (Sr²⁺) and 15 (Ba²⁺). Factors influencing preferential solvation are briefly discussed. Detailed recalculations of $ n_{\text{W}} $ in the raffinose–water system from literature data also allows resolution of a problem with the Onsager Relations.     

The equilibrium melting temperature and isothermal crystallisation kinetics of cyclic poly(butylene terephthalate) and styrene maleimide (c-PBT/SMI) blends

The equilibrium melting point ( $ T_{\text{m}}^{0} $ ) and isothermal crystallisation kinetics of cyclic poly(butylene terephthalate) (c-PBT) and styrene maleimide (SMI) blends prepared by solid dispersion and in situ polymerisation of cyclic butylene terephthalate oligomers (CBT) within SMI were investigated. This c-PBT/SMI blend is a miscible semicrystalline–amorphous blend system. The $ T_{\text{m}}^{0} $ of c-PBT/SMI blends was determined using the Hoffman and Weeks method, while Avrami crystallisation kinetic model have been applied to study their isothermal crystallisation kinetics. It was found that $ T_{\text{m}}^{0} $ decreased with increasing SMI content in the blend compositions. All the crystallisation exotherms were obtained from differential scanning calorimetry under isothermal experimental conditions. The average value of Avrami exponent, n, is in the range of 2.4–2.8 for the primary crystallisation process for c-PBT and its blends, which suggest that heterogeneous nucleation of spherulites occurred and growth of spherulites was between two-dimensional and three-dimensional.     

Chemical Transfer Energies of Some Homologous Amino Acids and the –CH2– Group in Aqueous DMF: Solvent Effect on Hydrophobic Hydration and Three Dimensional Solvent Structure

Standard transfer Gibbs energies, $ \Updelta_{\text{tr}} G^{^\circ } $ , of a series of homologues α-amino acids have been evaluated by determining the solubility of glycine, alanine, amino butyric acid and norvaline gravimetrically at 298.15 K. Standard entropies of transfer, $ \Updelta_{\text{tr}} S^{^\circ } $ , of the amino acids have also been evaluated by extending the solubility measurement to five equidistant temperatures ranging from 288.15 to 308.15 K. The chemical contributions $ \Updelta_{\text{tr,ch}} G^{^\circ } (i) $ of α-amino acids, as obtained by subtracting theoretically computed contributions to $ \Updelta_{\text{tr}} G^{ \circ } $ due to cavity and dipole–dipole interaction effects from the corresponding experimental $ \Updelta_{\text{tr}} G^{ \circ } $ , are indicative of the superimposed effect of increased basicity and dispersion and decreased hydrophobic hydration (hbh) in DMF–water solvent mixtures as compared to those in water, while, in addition, $ T\Updelta_{\text{tr,ch}} S^{^\circ } (i) $ is guided by structural effects. The computed chemical transfer energies of the –CH₂– group, $ \Updelta_{\text{tr,ch}} P^{^\circ } $ (–CH₂–) [P = G or S] as obtained by subtracting the value of lower homologue from that of immediately higher homologue, are found to change with composition indicating involvement of several opposing factors in the calculation of the chemical interactions. The $ \Updelta_{\text{tr,ch}} G^{^\circ } $ (–CH₂–) values are found to be guided by the decreased hydrophobic effect in DMF–water mixtures, and are indicative of the nature of the three dimensional structure of the aquo-organic solvent system around each solute.     

Volumetric and Viscometric Studies in Binary Liquid Mixtures of 2-Methyl-2-propanol with Some Ketones at Different Temperatures

Densities, ??, and viscosities, ??, of binary mixtures of 2-methyl-2-propanol with acetone (AC), ethyl methyl ketone (EMK) and acetophenone (AP), including those of the pure liquids, were measured over the entire composition range at 298.15, 303.15 and 308.15?K. From these experimental data, the excess molar volume $V_{\mathrm{m}}^{\mathrm{E}}$ , deviation in viscosity ????, partial and apparent molar volumes ( $\overline{V}_{\mathrm{m},1}^{\,\circ }$ , $\overline{V}_{\mathrm{m},2}^{\,\circ }$ , $\overline{V}_{\phi ,1}^{\,\circ}$ and $\overline{V}_{\phi,2}^{\,\circ} $ ), and their excess values ( $\overline{V}_{\mathrm{m},1}^{\,\circ \mathrm{E}}$ , $\overline{V}_{\mathrm{m,2}}^{\,\circ \mathrm{ E}}$ , $\overline {V}_{\phi \mathrm{,1}}^{\,\circ \mathrm{ E}}$ and $\overline{V}_{\phi \mathrm{,2}}^{\,\circ \mathrm{ E}}$ ) of the components at infinite dilution were calculated. The interaction between the component molecules follows the order of AP > AC > EMK.     

A thermodynamic study of complexation of 18-crown-6 with Zn2+, Tl+, Hg2+ and {\text{UO}}^{{{\text{2 + }}}}_{{\text{2}}} cations in acetonitrile-dimethylformamide binary media and study the effect of anion on the stability constant of (18C6-Na+) complex in methanol solutions

The equilibrium constants and thermodynamic parameters for complex formation of 18-crown-6(18C6) with Zn²⁺, Tl⁺, Hg²⁺ and $ {\text{UO}}^{{{\text{2 + }}}}_{{\text{2}}} $ cations have been determined by conductivity measurements in acetonitrile(AN)-dimethylformamide(DMF) binary solutions. 18-crown-6 forms 1:1 complexes [M:L] with Zn²⁺, Hg²⁺ and $ {\text{UO}}^{{{\text{2 + }}}}_{{\text{2}}} $ cations, but in the case of Tl⁺ cation, a 1:2 [M:L₂] complex is formed in most binary solutions. The thermodynamic parameters ( $ \Delta {\text{H}}^{ \circ }_{{\text{c}}} $ and $ \Delta {\text{S}}^{ \circ }_{{\text{c}}} $ ) which were obtained from temperature dependence of the equilibrium constants show that in most cases, the complexes are enthalpy destabilized but entropy stabilized and a non-monotonic behaviour is observed for variations of standard enthalpy and entropy changes versus the composition of AN/DMF binary mixed solvents. The obtained results show that the order of selectivity of 18C6 ligand for these cations changes with the composition of the mixed solvent. A non-linear relationship was observed between the stability constants (logK_f) of these complexes with the composition of AN/DMF binary solutions. The influence of the $ {\text{ClO}}^{ - }_{{\text{4}}} $ , $ {\text{NO}}^{ - }_{{\text{3}}} $ and $ {\text{Cl}}^{ - } $ anions on the stability constant of (18C6-Na⁺) complex in methanol (MeOH) solutions was also studied by potentiometry method. The results show that the stability of (18C6-Na⁺) complex in the presence of the anions increases in order: $ {\text{ClO}}^{ - }_{{\text{4}}} $  >  $ {\text{NO}}^{ - }_{{\text{3}}} $  >  $ {\text{Cl}}^{ - } $ .     

The dissolution properties of N-guanylurea-dinitramide (FOX-12) in dimethyl sulfoxide (DMSO)

The enthalpy of dissolution of FOX-12 in dimethyl sulfoxide (DMSO) was measured by means of a RD496-III Calvet microcalorimeter at 298.15 K. Empirical formulae for the calculation of the enthalpy of dissolution ( $ \Updelta_{\text{diss}} H $ ), relative partial molar enthalpy ( $ \Updelta_{\text{diss}} H_{\text{partial}} $ ), and relative apparent molar enthalpy ( $ \Updelta_{\text{diss}} H_{\text{apparent}} $ ) were obtained from the experimental data of the enthalpies of dissolution of FOX-12 in DMSO. The kinetic equation that describes the dissolution process of FOX-12 in DMSO at 298.15 K is determined as $ \frac{{{\text{d}}\alpha }}{{{\text{d}}t}} = 8.5 \times 10^{ - 3} (1 - \alpha )^{0.59} $ .     

Thermochemical Properties of n-Undecylammonium Bromide Monohydrate C11H28BrNO(s)

The crystal structure of n-undecylammonium bromide monohydrate was determined by X-ray crystallography. The crystal system of the compound is monoclinic, and the space group is P2₁/c. Molar enthalpies of dissolution of the compound at different concentrations m/(mol·kg^?1) were measured with an isoperibol solution–reaction calorimeter at T = 298.15 K. According to the Pitzer’s electrolyte solution model, the molar enthalpy of dissolution of the compound at infinite dilution ( $ \Updelta_{\text{sol}} H_{\text{m}}^{\infty } $ ) and Pitzer parameters ( $ \beta_{\text{MX}}^{(0)L} $ and $ \beta_{\text{MX}}^{(1)L} $ ) were obtained. Values of the apparent relative molar enthalpies ( $ {}^{\Upphi }L $ ) of the title compound and relative partial molar enthalpies ( $ \bar{L}_{2} $ and $ \bar{L}_{1} $ ) of the solute and the solvent at different concentrations were derived from experimental values of the enthalpies of dissolution.     

Thermodynamic study of metal corrosion and inhibitor adsorption processes in copper/N-1-naphthylethylenediamine dihydrochloride monomethanolate/nitric acid system: part 2

N-1-Naphthylethylenediamine dihydrochloride monomethanolate (N-NEDHME) was tested as a corrosion inhibitor for copper in 2 M HNO₃ solution using the standard gravimetric technique at 303–343 K. N-NEDHME acts as an inhibitor for copper in an acidic medium. Inhibition efficiency increases with increase in concentration of N-NEDHME but decreases with a rise in temperature. Thermodynamic parameters such as adsorption heat ( $ \Updelta H_{\text{ads}}^\circ $ ), adsorption entropy ( $ \Updelta S_{\text{ads}}^\circ $ ) and adsorption free energy ( $ \Updelta G_{\text{ads}}^\circ $ ) were obtained from experimental data of the temperature studies of the inhibition process at five temperatures ranging from 303 to 343 K. Kinetic parameters activation such as $ E_{a} $ , $ \Updelta H_{\text{a}}^\circ $ , $ \Updelta S_{\text{a}}^\circ $ and pre-exponential factors have been calculated and are discussed. Adsorption of N-NEDHME on the copper surface in 2 M HNO₃ follows the Langmuir isotherm model.     

To determine the half-life for gemcitabine hydrochloride using microcalorimetry

The enthalpies of dissolution of gemcitabine hydrochloride in 0.9 % normal saline (medical) and citric acid solution were measured using a microcalorimeter at 309.65 K under atmospheric pressure. The differential enthalpy $ \left( {\Updelta_{\text{dif}} H_{\text{m}}^{{{\theta}}} } \right) $ and molar enthalpy $ \left( {\Updelta_{\text{sol}} H_{\text{m}}^{{{\theta}}} } \right) $ of dissolution were determined, respectively. The corresponding kinetic equation described the dissolution were elucidated to be da/dt = 10^?3.84(1 ? a)^0.92 and da/dt = 10^?3.80(1 ? a)^1.21. Besides, the half-life, $ \Updelta_{\text{sol}} H_{\text{m}}^{{{\theta}}} ,\;\Updelta_{\text{sol}} G_{\text{m}}^{{{\theta}}} $ and $ \Updelta_{\text{sol}} S_{\text{m}}^{{{\theta}}} $ of the dissolution were also obtained. Obviously, it will provide a simple and reliable method for the clinical application of gemcitabine hydrochloride.     

A CASPT2//CASSCF study of the quartet excited state \tilde{a}^{4}A^{\prime\prime} of the HCNN radical

Complete active space self-consistent field and second-order multiconfigurational perturbation theory methods have been performed to investigate the quartet excited state ${\tilde{a}}^{4}{A^{\prime\prime}}$ potential energy surface of HCNN radical. Two located minima with respective cis and trans structures could easily dissociate to CH $({\tilde{a}}^{4}\Sigma^{-})$ and $N_{2} ({\tilde{X}}^{1}\Sigma_{\rm g}^{+})$ products with similar barrier of about 16.0 kcal/mol. In addition, four minimum energy crossing points on a surface of intersection between ${\tilde{a}}^{4}A^{\prime\prime}$ and X ( $X={\tilde{X}}^{2}A^{\prime\prime}$ and ${\tilde{A}}^{2}A^{\prime}$ ) states are located near to the minima. However, the intersystem crossing ${\tilde{a}}^{4}A^{\prime\prime} \rightarrow X$ is weak due to the vanishingly small spin–orbit interactions. It further indicates that the direct dissociation on the ${\tilde{a}}^{4}{A^{\prime\prime}}$ state is more favored. This information combined with the comparison with isoelectronic HCCO provides an indirect support to the recent experimental proposal of photodissociation mechanism of HCNN.     

Spectroscopic Studies on the Thermodynamics of the Complexation of Trivalent Curium with Propionate in the Temperature Range from 20 to 90 °C

The thermodynamics of the stepwise complexation reaction of Cm(III) with propionate was studied by time resolved laser fluorescence spectroscopy (TRLFS) and UV/Vis absorption spectroscopy as a function of the ligand concentration, the ionic strength and temperature (20–90 °C). The molar fractions of the 1:1 and 1:2 complexes were quantified by peak deconvolution of the emission spectra at each temperature, yielding the log₁₀ $ K_{n}^{\prime } $ values. Using the specific ion interaction theory (SIT), the thermodynamic stability constants log₁₀ $ K_{n}^{0} (T) $ were determined. The log₁₀ $ K_{n}^{0} (T) $ values show a distinct increase by 0.15 (n = 1) and 1.0 (n = 2) orders of magnitude in the studied temperature range, respectively. The temperature dependency of the log₁₀ $ K_{n}^{0} (T) $ values is well described by the integrated van’t Hoff equation, assuming a constant enthalpy of reaction and $ \Updelta_{\text{r}} C^\circ_{{p,{\text{m}}}} = 0, $ yielding the thermodynamic standard state $ \left( {\Updelta_{\text{r}} H^\circ_{\text{m}} ,\Updelta_{\text{r}} S^\circ_{\text{m}} ,\Updelta_{\text{r}} G^\circ_{\text{m}} } \right) $ values for the formation of the $ {\text{Cm(Prop)}}_{n}^{3 - n} $ , n = (1, 2) species.     

Excess Molar Volumes and Excess Isentropic Compressibilities of o-Toluidine + Tetrahydropyran with Pyridine or Benzene or Toluene Ternary Mixtures at 298.15, 303.15 and 308.15 K

The densities, ρ ₁₂₃, and speeds of sound, u ₁₂₃, of ternary o-toluidine (OT, 1) + tetrahydropyran (THP, 2) + pyridine (Py) or benzene or toluene (3) mixtures have been measured as a function of composition at 298.15, 303.15 and 308.15 K. Values of the excess molar volumes, $ V_{123}^{\text{E}} , $ and excess isentropic compressibilities, $ (\kappa_{\text{S}}^{\text{E}} )_{123} , $ of the studied mixtures have been determined by employing the measured experimental data. The observed thermodynamic properties were fitted with the Redlich–Kister equation to determine adjustable ternary parameters and standard deviations. The $ V_{123}^{\text{E}} $ and $ (\kappa_{\text{S}}^{\text{E}} )_{123} $ values were also analyzed in terms of Graph theory. It was observed that Graph theory correctly predicts the sign as well as magnitude of $ V_{123}^{\text{E}} $ and $ (\kappa_{\text{S}}^{\text{E}} )_{123} $ values of the investigated mixtures. Analysis of the data suggests strong interactions and a more close packed arrangement in OT (1) + THP (2) + Py (3) mixtures as compared to those of the OT (1) + THP (2) + benzene (3) or toluene (3) mixtures. This may be due to the presence of a nitrogen atom in Py which results in stronger interactions for the OT:THP molecular entity as compared to those with benzene or toluene.     

Dissociation Enthalpies and Thermodynamic Constants of Sildenafil Citrate by the Regression of Multiwavelength pH-spectrophotometric Titration Data

pH-spectrophotometric titration data were used to determine the mixed dissociation constants of sildenafil citrate at different ionic strengths I at temperatures of 288.15, 298.15 and 310.15?K, with the use of two different multiwavelength and multivariate treatments of spectral data, SPECFIT32 and SQUAD(84) nonlinear regression analyses, and INDICES factor analysis. The reliability of the dissociation constants of this drug was proven with goodness-of-fit tests of the pH-spectra. The thermodynamic dissociation constants $ {\text{p}}K_{{{\text{a}},i}}^{\text{T}} $ were estimated by a nonlinear regression of (pK _a , I) data using the Debye-Hückel equation: $ {\text{p}}K_{{{\text{a}}, 1}}^{\text{T}} $ ?=?2.79 (1), 3.03 (3) and 3.53 (1); $ {\text{p}}K_{{{\text{a}}, 2}}^{\text{T}} $ ?=?4.97 (2), 5.23 (2) and 5.34 (1); $ {\text{p}}K_{{{\text{a}}, 3}}^{\text{T}} $ ?=?8.14 (2), 7.93 (1) and 7.47 (1); $ {\text{p}}K_{{{\text{a}}, 4}}^{\text{T}} $ ?=?9.47 (2), 9.30 (1) and 9.13 (4); and $ {\text{p}}K_{{{\text{a}}, 5}}^{\text{T}} $ ?=?10.73 (5), 10.75 (3) and 10.79 (5) at T?=?288.15, 298.15 and 310.15?K, respectively, where the numbers in parentheses are the standard deviations in the last significant digits. Concurrently, the experimentally determined five thermodynamic dissociation constants are in a good agreement with their computational prediction of the SPARC program based on knowledge of the chemical structures. The factor analysis of spectra in the INDICES program predicts the correct number of light-absorbing components when the instrumental error is known and when the signal-to-error ratio SER is higher than 10. A rough estimation of the dissociation enthalpies ??H ⁰ (kJ·mol^?1) and entropies ??S ⁰ (J·K^?1·mol^?1) has been obtained from the temperature variation of the thermodynamic dissociation constants by means of the van??t Hoff equation.     

Spectroscopic Studies of the Complexation of Iodine with Antihistamine Drugs in Solvents of Varying Relative Permittivity

The interaction of oxatomide (OXA), azacyclonol (AZA) and chloropheniramine (ClPA) antihistamine drugs with iodine was studied spectrophotometrically in different solvents and at three different temperatures. The electronic, FT-IR, far-IR, and mass spectra of the resulting charge-transfer (CT) complexes were recorded, in addition to thermal analysis. The results obtained show that the stoichiometries of the reactions are all 1:1. The observed time dependence of the CT band and subsequent formation of $ {\text{I}}_{3}^{ - } $ in solution were related to the slow transformation of the initially formed 1:1 (donor: I₂) outer complex to an inner complex (electron donor?Cacceptor), followed by a fast reaction of the inner complex with iodine to form a triiodide ion. The characteristic strong absorptions of $ {\text{I}}_{3}^{ - } $ are observed around 360?nm. The CT-complexes have the formulae [(OXA)I]⁺ $ {\text{I}}_{3}^{ - } $ , [(AZA)I]⁺ $ {\text{I}}_{3}^{ - } $ and [(ClPA)I]⁺ $ {\text{I}}_{3}^{ - } $ . The formation constants (K), molar absorption coefficients (?? _CT), and thermodynamic parameters ??H ^#, ??S ^# and ??G ^# of these interaction have been determined and discussed.