Molecular properties of the copolymers of <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-diallyl-<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-dimethylammonium chloride and maleic acid

The hydrodynamic and conformational properties of molecules of poly(N,N-diallyl-N,N-dimethylammonium chloride) and N,N-diallyl-N,N-dimethylammonium chloride-maleic acid copolymers of different compositions in solutions with various ionic-strength and pH values, as well as of the polyelectrolyte complex based on the copolymer with dodecyl sulfate anions in chloroform, are studied. For poly(N,N-diallyl-N,N-dimethylammonium chloride) molecules in a 1 M NaCl solution, the Kuhn segment length and the hydrodynamic diameter of the chain are estimated as A = 3.9 nm and d = 0.48 nm, respectively. In acidic solutions with pH 3.5, the copolymers demonstrate behavior typical for polyelectrolytes. In an alkaline solution with pH 13, when 1 M NaCl is added to the solution of the copolymer containing 29 mol % maleic acid units, there is an antipolyelectrolyte effect that manifests itself as an increase in the intrinsic viscosity of the copolymer and in the hydrodynamic radius of its molecules. It is found that an increase in the fraction of maleic acid units in the copolymer from 12 to 42 mol % brings about a reduction in the equilibrium rigidity of its macromolecules from 4.1 to 2.2 nm. The equilibrium rigidity of polyelectrolyte-complex molecules is higher than that of initial copolymer molecules owing to steric interactions arising between the aliphatic chains of dodecyl sulfate anions. In an electric field, the molecules of the complex are oriented owing to the induced dipole moment resulting from the displacement of dodecyl sulfate anions along the chain contour.     

Copolymer of <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-diallyl-<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-dimethylammonium chloride with maleic acid as drug carrier

A copolymer of N,N-diallyl-N,N-dimethylammonium chloride with maleic acid of constant composition was prepared under the conditions of radical initiation. The possibility of the functionalization of the copolymer with drugs containing amino groups by polymer-analogous transformations was examined. Conditions were found for preparing conjugates of the copolymer with isoniazid. The structures and the quantitative compositions of the conjugates were determined by ¹³С NMR spectroscopy, and the possibility of preparing conjugates with controlled drug content was demonstrated.     

Reactions of 1-nitrocyclohexene with <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-binucleophiles

A modification of 1-nitrocyclohexene synthesis is proposed; its reaction with phenylhydrazine and benzoic acid hydrazide is shown to afford monoadducts, and with hydrazine hydrate, bisaduct. With diphenylguanidine occurs heterocyclization to 1-phenyl-2-N-phenylamino-4,5,6,7-tetrahydrobenzimidazole, whose structure is confirmed by the X-ray diffraction data. The analysis performed for this compound of the electron density distribution function in the crystal made it possible to estimate the charge distribution, π-electrons delocalization nature, and the role of N-H…N, C-H…H-C and C-H…C interactions in the formation of the crystal packing.     

Equilibrium Compositions of HF Solutions in <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-Dimethylformamide

For HF solutions in DMF, concentration-dependent fractions of DMF molecules (α(DMF)) that remain unassociated and that enter heteroassociates (HAs) of 1 : 1, 4 : 1, and 12 : 1 molecular stoichiometries were obtained by two independent methods, namely, from an analysis of IR spectra and by calculating the material balance. The experimental way was shown to be enough exact in determining the ratio between the solvent molecules in four different states up to ~83 mol % HF. The equilibrium compositions of HF–DMF solutions were estimated over the entire range of concentrations. Starting with [HF] of ~25 mol %, more than one-half HF molecules are associated, and at [HF] of ~50–92 mol %, at least 90% of the HF molecules are associated. The equilibrium composition of HF–organic solvent (Solv) solutions in which HAs of 1 : 1, 1 : 4, and 1 : 12 molecular stoichiometries are formed, can be described by a single set of α(HF–Solv) versus concentration plots.     

Reactions of <Emphasis Type="Italic">N</Emphasis>-Allyl- and <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-Diallyltrifluoromethanesulfonamides with Carboxylic Acid Amides under Oxidizing Conditions

Reactions of acetamide and benzamide with N-allyltrifluoromethanesulfonamide in the presence of t-BuOCl–NaI afforded exclusively 2,5-bis(chloromethyl)-1,4-bis(trifluoromethanesulfonyl)piperazine. Analogous reaction with N,N-diallyltrifluoromethanesulfonamide gave mixed halogenation product at only one C=C double bond of the substrate.     

Synthesis of amino acid conjugates of glycyrrhizic acid using <Emphasis Type="Italic">N</Emphasis>-hydroxyphthalimide and <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>'-dicyclohexylcarbodiimide

Synthesis of amino acid conjugates of glycyrrhizic acid with the use of N-hydroxyphthalimide, N,N'-dicyclohexylcarbodiimide, and tert-butyl esters of L-amino acids (valine, isoleucine, phenylalanine, and methionine) was performed followed by deprotection with trifluoroacetic acid. The target amino acid conjugates were isolated by column chromatography on silica gel in 40–45% yield. The structure of the prepared compounds was confirmed by IR and ¹³C NMR spectroscopy.     

Conformations and properties of <Emphasis Type="Italic">O</Emphasis>-Alkyl-<Emphasis Type="Italic">S</Emphasis>-(2-<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-dialkylamino)-ethylmethylthiophosphonates

Conformers of the biologically active compounds CH₃P(O)(OR)(SCH₂CH₂NR ₂ ^′ ), where (I) R = i-C₄H₉, R′ = C₂H₅ and (II) R = C₂H₅, R′ = i-C₃H₇, are calculated within the AM1 level of theory. The elongated and twisted forms with maximum and minimum distances between a nitrogen atom and those of a phosphorus tetrahedron, respectively, and bearing a syn and anti oriented alkoxy group relative to a phosphoryl oxygen, are studied. It is found that the differences between the energy, electronic, and geometric parameters of these forms are apparent in differences between their properties, e.g., the ability to participate in complexation and protonation, reactions that to some extent simulate the interaction between a substance and a biological object.     

Synthesis and properties of maleopimaric <Emphasis Type="Italic">N</Emphasis>-(<Emphasis Type="Italic">n</Emphasis>-alkyl)imides

Method of synthesis of maleopimaric N-(n-alkyl)imides by the reaction of maleopimaric acid with primary aliphatic amines in melt was developed. On the basis of the obtained compounds allyl esters were synthesized. Thermal stability of the synthesized compounds was evaluated by the method of derivatography.     

The smallest Hosoya index in (<Emphasis Type="Italic">n</Emphasis>, <Emphasis Type="Italic">n</Emphasis> + 1)-graphs

A (n, n + 1)-graph G is a connected simple graph with n vertices and n + 1 edges. In this paper, we determine the lower bound for the Hosoya index in (n, n + 1)-graphs in terms of the order n, and characterize the (n, n + 1)-graph with the smallest Hosoya index.     

Thiocyanation of <Emphasis Type="Italic">N</Emphasis>-arylsulfonyl-, <Emphasis Type="Italic">N</Emphasis>-aroyl-, and <Emphasis Type="Italic">N</Emphasis>-[(<Emphasis Type="Italic">N</Emphasis>-arylsulfonyl)benzimidoyl]-1,4-benzoquinone imines

Reactions of thiocyanate ion with N-aroyl-, N-arylsulfonyl-, and N-(N-arylsulfonylbenzimidoyl)-1,4-benzoquinone imines follow the 1,4-addition pattern, and the adducts undergo intramolecular cyclization to give the corresponding N-substituted 5-amino-1,3-benzoxathiol-2-ones as final products.     

Solution Thermodynamics of <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis><Superscript>/</Superscript>-Ethylenebis-(salicylideneiminato)-diaquochromium(III) Chloride in Aqueous Dimethylsulphoxide

The densities, viscosities and refractive indices of N,N ^/-ethylene-bis(salicylideneiminato)-diaquochromium(III) chloride, [Cr(salen)(H₂O)₂]Cl, in aqueous dimethylsulfoxide (DMSO) with different mass fractions (w ₂ = 0.20, 0.40, 0.60, 0.80 and 1.00) of DMSO were determined at 298.15, 308.15 and 318.15 K under atmospheric pressure. From measured densities, viscosities and refractive indices the apparent molar volumes (V _φ ), standard partial molar volume (V _φ ⁰ ), the slope (S _V ^* ), standard isobaric partial molar expansibility (φ _E ⁰ ) and its temperature dependence (?φ _E ⁰ /?T) _p , the viscosity B-coefficient, its temperature dependence (?B/?T), solvation number (S _n ) and apparent molar refractivity (R _D ^φ ), etc., were calculated and discussed on the basis of ion–ion and ion–solvent interactions. These results revealed that the solutions are characterized by ion–solvent interactions rather than by ion–ion interactions and the complex behaves as a long range structure maker. Thermodynamics of viscous flow was discussed in terms of transition state theory.     

<Emphasis Type="Italic">Z</Emphasis>-and <Emphasis Type="Italic">E</Emphasis>-conformers of <Emphasis Type="Italic">N</Emphasis>-chloroacetylcytisine

N-Chloroacetylcytisine was synthesized by acylation of (–)-cytisine. Stable Z- and E-conformers with respect to rotational isomerism around the N-12–CO bond were found in PMR spectra at room temperature. The point at which PMR resonances of the Z- and E-conformers coalesced upon heating was measured. The transition barrier between the conformers was estimated.     

Speciation studies of nitric acid and U(VI) third phases in <Emphasis Type="Italic">n</Emphasis>,<Emphasis Type="Italic">n</Emphasis>-dialkyl amides/<Emphasis Type="Italic">n</Emphasis>-dodecane systems

Conventionally composition of the actinide-extractant solvate is assumed to be the same in the unpartitioned organic phase and the formed third phase. For example, if a m:n solvate has formed during extraction, the solvate is expected to be in the same state even during the third phase condition. However contemporary analysis, based on the spectroscopy measurements and empirical observations, has indicated the presence of an extended solvate. In this article, the proposed speciation in nitric acid and U(VI) third phase formation in n–n dialkyl amide/dodecane-nitric acid systems has been modeled with empirical correlations.     

Renium(V) complexation with <Emphasis Type="Italic">N</Emphasis>-ethylthiourea

The stepwise complexation of rhenium(V) with N-ethylthiourea has been studied by the potentiometric method in 6 mol/L HCI at 298 K. It has been found that rhenium(V) forms five complex species with this ligand of the following compositions: [ReOLCl₄]^?, [ReOL₂Cl₃], [ReOL₃Cl₂]⁺, [ReOL₄Cl]²⁺, and [ReOL₅]³⁺. The calculated logarithms of stepwise formation constants of the complexes are the following: logK₁ = 4.10 ± 0.05, logK₂ = 3.16 ± 0.02, logK₃ = 2.61 ± 0.02, logK₄ = 2.26 ± 0.02, and logK₅ = 1.80 ± 0.02. It has been shown that the introduction of the ethyl radical into the thiourea molecule leads to an increase in the stability of rhenium(V) complexes.     

<Emphasis Type="Italic">N</Emphasis>-halohexamethyldisilazanes

The review is devoted to N-halohexamethyldisilazanes, perspective but scantily studied halogenating agents. Methods of preparation, physiochemical characteristics, and synthetic potential are considered. Mechanisms of a number of reactions are presented.     

Determination of epoxides by high-performance liquid chromatography following derivatization with <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-diethyldithiocarbamate

A reversed-phase, high-performance liquid chromatography (RP-HPLC) method that allows quantitation of low levels of epoxides has been described. The method involved derivatization of epoxides using 100- to 1,000-fold excess N,N-diethyldithiocarbamate (DTC) at 60 °C for 20 min at neutral pH. The unreacted DTC was then decomposed to CS₂ and diethyl amine by acidification of the reaction mixture to pH 2 using orthophosphoric acid. The first two steps could be performed in the same reaction vessel by sequential addition of reagents. In the final step, an aliquot (20 μL) of the derivatized sample was analyzed for the presence of stable esters of DTC by RP-HPLC using a Supelcosil LC-18-S (150 × 4.6-mm) column and a mobile phase consisting of 40% (v/v) acetonitrile in water at a flow of 1 mL min⁻¹. Using UV detection at 278 nm, the epoxides gave linear responses in the concentration range of 0.25 to 50 μM. The method is robust, and as low as 5 pmol of the analyte could be successfully detected and quantified with recoveries of ≥94%. Following a minimal pretreatment such as ultrafiltration (molecular weight cutoff 5,000 Da), the method is suitable for analysis of epoxides in complex physiological fluids (e.g., fetal bovine serum). The method has been rigorously evaluated and adapted in our laboratory for routine analysis and determination of stability of epoxides of 1,3-butadiene and other alkenes added to cell cultures.     

Effects of ionization on the phase behavior of poly(<Emphasis Type="Italic">N</Emphasis>-isopropylacrylamide-co-acrylic acid) and poly(<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-diethylacrylamide-co-acrylic acid) in water

Phase transitions of poly(N-isopropylacrylamide-co-acrylic acid) (PiPA-AA) and poly(N,N- diethylacrylamide-co-acrylic acid) (PdEA-AA) in water have been investigated by means of turbidimetry, Fourier transform infrared (FTIR) spectroscopy and differential scanning calorimetry (DSC). The phase transition temperatures (T_p) of these copolymers increase with the degree of ionization () of the acrylic acid (AA) units, which in turn is dependent on the pH of the solutions. Apparent values of pK_a for the AA units, determined from the pH dependencies of T_p, are 4.7 and 5.4 for PiPA-AA and PdEA-AA, respectively. Differences between T_p for PiPA-AA and T_p for PiPA homopolymer (T_p) are +1.5 and –0.2 °C/mol% of AA at =1 and 0, respectively. The values of T_p for PdEA-AA are +2.6 (ionic) and –0.5 (nonionic)°C/mol%, indicating that the incorporated AA units have a larger effect on PdEA than on PiPA. DSC measurements performed with each of these copolymers at different pH values show a linear relationship between T_p and the enthalpy of transition (H). IR measurements of PiPA-AA show that the profiles of IR bands from both iPA and AA units exhibit critical changes at T_p of the copolymer. Heating the solution above T_p leads to shifts of the amide II, C–H stretch, and C–H bend bands from the iPA units toward lower wavenumbers, as well as a shift of the amide I band from the iPA units toward higher wavenumbers. A decrease in the intensity of the symmetric C=O stretch IR band from carboxylate anions (1560 cm^–1), and an increase in the intensity of the C=O stretch band from COOH groups (1705 cm^–1) suggest that a partial protonation of the carboxylate groups (COO^–+H⁺COOH) takes place upon the phase transition.     

Viscosities and Surface Tensions of Phenetole with <Emphasis Type="Italic">N</Emphasis>-Methyl-2-pyrrolidone, <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-Dimethylformamide and Tetrahydrofuran Binary Systems at Three Temperatures

Viscosities, η, and surface tensions, σ, of binary systems of phenetole (ethoxy benzene or ethyl phenyl ether) with N-methyl-2-pyrrolidone, N,N-dimethylformamide or with tetrahydrofuran were measured over the entire mole fraction range and at (298, 303 and 308) K. The experimental data was used to compute the deviations in viscosity, Δη, and surface tension, Δσ. Values of the excess Gibbs energy of activation G*^E, surface entropy S _σ and surface enthalpy H _σ were calculated. Viscosity data of the binary systems were calculated using the Grunberg and Nissan and the three-body and four-body McAllister correlations. The Redlich–Kister method was used for evaluation of coefficients and standard deviations for Δη, Δσ and G*^E. The results were interpreted in terms of the probable effect of molecular interactions between components as well as polarity.