析相光度法测定铜（Ⅱ）的研究

本文研究了Ｃｕ－ＰＥＧ－ＤＤＴＣ（铜试剂）（ＮＨ４）２ＳＯ４体系的析相光度法并应用于测定Ｃｕ。最宜酸度为３．６－９．０（ＮａＡｃ－ＨＡｃ，ＮＨ４Ｃｌ－ＮＨ３．Ｈ２Ｏ）缓冲溶液，其络合物的最大吸收位于４５０ｎｍ，表观摩尔吸光系数为９．０５×１０＾３Ｌ．ｍｏｌ＾－１．ｃｍ＾－１，Ｃｕ浓度在０－３０μｇ／Ｌ范围内服从比耳定律，铜与ＤＤＴＣ形成组成为１：２的稳定络合物。该方法用于铝合金中铜的测定，获得了满     

富电子膦硫混配钴簇合物Co6S8[P（OCH3）3]6的电化学研究

利用循环伏安法研究了膦硫混配原子簇化合物Ｃｏ６Ｓ８「Ｐ（ＯＣＨ３）３」６的电化学行为,结果表明Ｃｏ６Ｓ８「Ｐ（ＯＣＨ３）３」６在ＣＨ２Ｃｌ２训可观察到三个可逆氧化还原过程,其电子转移过程为;Ｃｏ６Ｓ８「ｐ（ｏｃｈ３）３」６－＝＾（－Ｅ,＋Ｅ）Ｃｏ６Ｓ８「Ｐ（ＣＯＨ３０３」６ｙ０＝（＾－ｅ,＋ｅ）Ｃｏ６Ｓ８「Ｐ（ＯＣＨ３）３」６＾＋＝＾（－ｅ,＋ｅ）Ｃｏ６Ｓ８「Ｐ（ＯＣＨ３）３」６＾２＋并探讨了其电     

高温超导薄膜(Y0.6Ho0.4)Ba2Cu3O7-δ/SAT/MgO的制备

用脉冲激光沉积法在先在ＭｇＯ衬底上制备一层Ｓｒ２（ＡｌＴａ）Ｏ６薄膜作为过渡层,再制备（Ｙ０．６Ｈｏ０．４）Ｂａ２Ｃｕ３Ｏ７－δ超导薄膜,新超导薄膜的零电阻温度Ｔｃ０为８９Ｋ,临界电流密度Ｊｃ为２．３＊１０＾６Ａ／ｃｍ＾２（７７Ｋ）,用Ｘ射线衍射仪及扫描电子显微镜分析了薄膜特性。     

La2O3—BaO系复氧化物的现场拉曼光谱研究

对于Ｌａ０．２Ｂａ０．８－ｘＣａｘ（Ｏ，ＣＯ３）其中ｘ＝０．０、０．２、０．４、０．６氧化物在９７３Ｋ及甲烷氧化偶联（ＯＣＭ）条件下，无Ｃａ＾２＋的样品可用表面ＢａＣＯ３和（ＬａＯ）２ＣＯ３的Ｒａｍａｎ谱及８１０ｃｍ＾－１附近的Ｏ２＾２－特征峰来表征；含Ｃａ＾２＋的样品，则表现了混合碳酸盐（Ｃａ，Ｂａ）ＣＯ３的特征，还有位于１１３５ｃｍ＾－１（ｗ）和８１０ｃｍ＾－１（ｗ）的Ｏ２＾－、Ｏ２＾２－瞬时     

在He和Ne的流动余辉中POCl3的解离动力学

本文利用流动余辉技术研究了亚稳态原子Ｈｅ（２＾３ｓ）和Ｎｅ（＾３ｐ０．２）与ＰＯＣｌ３分子的传能反应，获得了激发态碎片ＰＯ（Ａ）和ＰＯ（Ｂ）的发射光谱，测定了Ｈｅ（２＾３ｓ）与ＰＯＣｌ３反应中ＰＯ（Ａ）和ＰＯ（Ｂ）的形成速率常数，其数值分别为：ＫＰＯ（Ａ）＝３．６８×１０＾－１１ｃｍ＾３·ｍｏｌｅｃｕｌｅ＾－１Ｓ＾－１和ＫＰＯ（Ｂ）＝９．４０×１０＾－１１ｃｍ＾３·ｍｏｌｅｃｕｌｅ＾－１·Ｓ＾－１     

偶氮基染料掺杂薄膜的双光子图象存储

研究了偶氮基染料掺杂薄膜ＭＯ－ＰＶＡ和ＥＯ－ＰＶＡ的双光子存储特性。在对薄膜用Ａｒ＾＋激光作预激发下实现了Ｈｅ－Ｎｅ激光的红光存储。获得了实时和短时存储照片。光电记录存储曲线，分析了双光四能级系统的存储机制。实现确定了最佳预激发功率约为０．２８Ｗ／ｃｍ＾２，最小Ｈｅ－Ｎｅ光可存储功率密度低于０．２Ｗ／ｃｍ＾２。     

对Bi-2212超导体中的Raman谱指认

本文对Ｂｉ２－ｘＰｂｘＳｒ２ＣａＣｕ２Ｑδ（ｘ＝０￣０．５）系列样吕以及在真空下不同温度退火的Ｂｉ１．６Ｐｂ０．４Ｓｒ２ＣａＣＵ２Ｏδ样品进行了Ｘ射线衍射和Ｒａｍａｎ谱实验研究。测量表明,随着退火温度的升高,ａ,ｂ,ｃ轴晶格常数增加,与Ｏ（１）ＣｕＢｇ模式相关的２９４ｃｍ＾－１的峰强减少,峰位红移。研究结果进一步表明,４６４ｃｍ＾－１和６３０ｃｍ＾－１峰分别与Ｏ（３）ＢｉＡ１ｇ和Ｏ（２）ＳｒＡ１ｇ     

在Ar和Xe低温基体中Fe（CO）3与CO扩散控制反应研究

本文用２８０ｎｍ脉冲激光光解被Ａｒ和Ｘｅ基体隔离的Ｆｅ（ＣＯ）５以产生配位不饱和的Ｆｅ（ＣＯ）３。用傅里衰变换红外光谱仪实时监察光解停止后Ｆｅ（ＣＯ）３和ＣＤ的复合，并以Ｓｍｏｌｕｃｈｏｗｓｋｉ扩散控制反应动力学理论模型求得Ｆｅ（ＣＯ）３与ＣＯ的反应半径为４．０×１０＾－１０ｍ，ＣＯ在１０Ｋ的Ａｒ和Ｘｅ基体中的扩散系数分别为２．２×１０＾－２３ｍ＾２／ｓ和４．５×±∩＾－２３ｍ＾２／ｓ。     

氯化钙—聚乙二醇配位聚合物的配位数研究

ＣａＣｌ２与ＰＥＧ在无水乙醇中发生反应制得的试样,以ＸＰＳ和ＩＲ测试的结果,表明该试样中存在Ｏ－Ｃａ配位键。通过溶液电导率的测量,发现１个Ｃａ＾２＋与ＰＥＧ４个链节单元的氧形成配位结构,又以电导率手段测得ＣｕＣｌ２－ＰＡＡｍ配位聚合物的配位数,其结果与利用Ｃｕ＾２＋２ｐＸＰＳ谱上的Ｓｈａｋｅ－ｕｐ效应研究所得该配位聚合物的配侠数一致,间接地验证以电导率手段测得ＣａＣｌ２－ＰＥＧ配侠聚合物配位数的可     

Tl—1223超导体及其复Ag带的制备

研究了用产中分熔化法制备Ｔｌ－１２２３超导体的工艺。样品的名义组成为（Ｔｌ０．５Ｐｂ０．５）（Ｓｒ０．８Ｂａ０．２）Ｃａ２Ｃｕ３Ｏｙ。经熔化退火的样品，其磁化电流的７７Ｋ和１Ｔ下大于２×１０＾４／ｃｍ＾２。用熔化－退火的超导粉作原料制得的复Ａｇ带短样，Ｊｃ达１．６－１．７×１０＾４Ａ／ｃｍ＾２（７７ｋ，０Ｔ）。采用烧结后的超导粉作原料，在制备复Ａｇ带的工艺中，如用熔化－退火的热处理制度，可以免除…     

GH39不锈钢和LFM铝的热脱附

本文用线性升温热脱附法研究GH39不锈钢及LFM铝的脱附现象。得到它们的主要脱附气体的脱附速率的温度特性,即热脱附谱,脱附反应级数和脱附激活能。可为聚变装置真空室的选材和清洗提供参考。     

超声波在树脂再生中的应用

本文阐述了超声波用于树脂再生的最新技术，超声脱附以及它的原理一超声场聚能效应。该方法和传统的化学方法相比较：不仅具有操作简单，化学药品消耗少，排污量少等优点。而且还能增加树脂的脱附速率，减少脱附时间，增加解吸平衡物的浓度。本文综述了在这一领域的最近研究进展，各种不同频率和功率对树脂再生效果的影响，为该领域的研究工作提供参考。     

Desorption kinetics and surface diffusion of potassium,rubidium and cesium on a silicon(111)7 × 7-surface

Using pulsed atomic beam technique and a surface ionization ion microscope, the desorption kinetics and the surface diffusion of the alkalis potassium, rubidium and cesium were investigated on a Si(111)7 × 7-surface at extremely low alkali coverages. In the temperature range 1120 … 800 K, the mean adsorption lifetime τ(T) = τ₀ · exp(E_desⁱ/kT) and the mean diffusion length x(T) - defined in the equilibrium between adsorption, diffusion and desorption - were measured. From these data the diffusion constant D(T) = D₀ · exp(-E_diff/kT) was obtained as D = x^?2/τ. For temperatures T ? 750 K, the diffusion constant was calculated from nonstationary alkali concentration profiles using the Boltzmann-Matano method. From the temperature dependence of these quantities the parameters of desorption (E_des,ⁱ τ₀) and surface diffusion (E_diff, D₀) for K, Rb and Cs on Si(111) were obtained. The values of E_diff and D₀ are comparably high and may be interpreted by non-localized diffusion according to a model proposed by Bonzel (Surf. Sci. 21 (1970) 45).     

Desorption of polymers: role of the stagnant layer

The desorption of polymers is studied theoretically and with Monte Carlo simulations. Two regimes can be distinguished: in one regime the detachment of the polymer from the surface is the slowest process, and in the other it is the diffusion of the polymer away from the surface. In both regimes the desorption rate depends on the thickness H of the stagnant layer, i.e. the layer in which the polymer movement is dominated by diffusion. In the diffusion-limited regime the desorption rate scales as H ^{? 2}, as expected for diffusive processes. In the detachment-limited regime the desorption rate scales as H ^{? 1}. The importance of the thickness of the stagnant layer in the detachment-limited regime is due to the fact that the polymer, after it has detached, will most likely readsorb soon after: the probability that the polymer does not readsorb, but crosses the stagnant layer, is inversely proportional to the thickness of the stagnant layer.     

分子筛在真空低温下水汽吸附脱附性实验研究

空间遥感仪器红外通道的信号衰减,入轨初期的主要原因是由于材料释放的水汽在低温光学窗口表面沉积,导致红外透射率降低所致。主动吸附是控制低温沉积污染的措施之一。分子筛对包括水汽在内的多种污染物具有良好的吸附作用,可以作为控制污染物的吸附材料。目前对于分子筛吸附特性的研究集中在常压环境。通过试验测试了13x型分子筛在高真空低温环境下,对水汽的吸附特性。     

A study of the kinetics of isothermal nicotine desorption from silicon dioxide

The isothermal kinetics of nicotine desorption from silicon dioxide (SiO₂) was investigated. The isothermal thermogravimetric curves of nicotine at temperatures of 115 °C, 130 °C and 152 °C were recorded. The kinetic parameters (E_a, ln A) of desorption of nicotine were calculated using various methods (stationary point, model constants and differential isoconversion method). By applying the “model-fitting” method, it was found that the kinetic model of nicotine desorption from silicon dioxide was a phase boundary controlled reaction (contracting volume). The values of the kinetic parameters, E_a,α and ln A_α, complexly change with changing degree of desorption and a compensation effect exists. A new mechanism of activation for the desorption of the absorbed molecules of nicotine was suggested in agreement with model of selective energy transfer.     

Desorption of dimethylformamide from Zn4O(C8H4O4)3 framework

Both dimethylformamide (DMF) and diethylformamide (DEF) are important solvents for the synthesis of Zn₄O(C₈H₄O₄)₃ framework (MOF-5). It is generally recognized that DMF molecules can be completely displaced by CH₂Cl₂ during the synthesis of MOF-5. Herein, however, it was found that the DMF molecules inside the pores of the MOF-5 framework cannot be displaced by CH₂Cl₂. The desorption of the DMF molecules from the pores, which requires a temperature of 100 °C or above, is the first order with activation energy of 56.38 kJ/mol. In contrast, DEF molecules can be completely displaced by CH₂Cl₂ during the synthesis of MOF-5, because DEF molecules cannot penetrate into the pores of the MOF-5 paste.     

Optical second-harmonic investigations of the isothermal desorption of SiO from the Si(100) and Si(111) surfaces

The isothermal desorption of SiO from the Si(100) and Si(111) surfaces was investigated by means of optical second-harmonic generation (SHG). Due to the high adsorbate sensitivity of this method, desorption rates could be measured over a wide range from 10⁻¹ to 10⁻⁶ ML s⁻¹. From their temperature dependence between 780 and 1000 K, activation energies of E_A=3.4±0.2 eV and E_A=4.0±0.3 eV and pre-exponential factors of ν₀=10^16±1 s⁻¹ and ν₀=10^20±1 s⁻¹ for SiO desorption were obtained for Si(100) and Si(111), respectively. In the case of the Si(100) surface, a pronounced decrease of the first-order rate constants was observed upon increasing the initial coverage from 0.02 to 0.6 ML. The results are interpreted in terms of coverage-dependent oxygen-binding configurations, which influence the stability of the oxide layer.     

热解吸气相色谱法测定皮鞋厂室内的苯含量

采用热解吸气相色谱法分别测定皮鞋厂成型车间、缝制车间和配料车间空气中的苯含量.用活性炭吸附管采集样品,并放入热解吸仪中加热,通氮气解吸出苯,用气相色谱仪FID检测器分析.结果表明,采样量为10L时,热解吸气相色谱法的平均解吸效率为97.5％,精密度和灵敏度均较高,适用于工作场所中苯浓度的测定.检测数据显示3个场所的苯浓度均符合国家标准.