Investigation into ramie whisker reinforced arylated soy protein composites

Whiskers were prepared from ramie fibers and were characterized using atomic force microscopy to evaluate their dimensions. SPI/whiskers composites (SW) were prepared by incorporating different weight contents (wt.%) of the whiskers into soy protein isolate (SPI). Thiodiglycol was used as a plasticizer for the preparation of SW composites. The SW composites were arylated with 2,2-diphenyl-2-hydroxyethanoic acid through the process of “dip-coating” and coded as SW-B. In this paper, the characterization of SW and SW-B composites, such as their morphologies, mechanical properties, thermal stability, optical transmittance, and water uptake, are discussed. The results indicated substantial improvement in the water resistance, thermal stability, and the modulus of the SW-B composites after arylation due to the formation of hydrophobic diphenylhydroxymethane (DPHM) microparticles on the surface. This work provides a novel method to increase the water resistance of protein based composites.     

Banana fiber-reinforced biodegradable soy protein composites

Banana fiber, a waste product of banana cultivation, has been used to prepare banana fiber reinforced soy protein composites. Alkali modified banana fibers were characterized in terms of density, denier and crystallinity index. Fourier transformed infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and thermogravimetric analysis (TGA) were also performed on the fibers. Soy protein composites were prepared by incorporating different volume fractions of alkali-treated and untreated fibers into soy protein isolate (SPI) with different amounts of glycerol (25%–50%) as plasticizer. Composites thus prepared were characterized in terms of mechanical properties, SEM and water resistance. The results indicate that at 0.3 volume fraction, tensile strength and modulus of alkali treated fiber reinforced soy protein composites increased to 82% and 963%, respectively, compared to soy protein film without fibers. Water resistance of the composites increased significantly with the addition of glutaraldehyde which acts as cross-linking agent. Biodegradability of the composites has also been tested in the contaminated environment and the composites were found to be 100% biodegradable.     

Mechanical properties of rigid polyurethane composites reinforced with surface treated ultrahigh molecular weight polyethylene fibers

The mechanical properties of ultrahigh molecular weight polyethylene (UHMWPE) fibers reinforced rigid polyurethane (PU) composites were studied, and the effects of the fiber surface treatment and the mass fraction were discussed. Chromic acid was used to treat the UHMWPE fibers, and polyurethane composites were prepared with 0.1 to 0.6 wt% as‐received and treated UHMWPE fibers. Attenuated total reflection Fourier transform infrared demonstrated that oxygen‐containing functional groups were efficiently grafted to the fiber surface. The mechanical performance tests of the UHMWPE fibers/PU composites were conducted, and the results revealed that the treated UHMWPE fibers/PU composites had better tensile, compression, and bending properties than as‐received UHMWPE fibers/PU composites. Thermal gravimetric analyzer showed that the thermal stability of the treated fiber composites were improved. The interface bonding of PU composites were investigated by scanning electron microscopy and dynamic mechanical analysis, and the results indicated that the surface modification of UHMWPE fiber could improve the interaction between fiber and PU, which played a positive role in mechanical properties of composites.     

Effects of cellulose whiskers on properties of soy protein thermoplastics

Environmentally-friendly SPI/cellulose whisker composites were successfully prepared using a colloidal suspension of cellulose whiskers, to reinforce soy protein isolate (SPI) plastics. The cellulose whiskers, having an average length of 1.2 microm and diameter of 90 nm, respectively, were prepared from cotton linter pulp by hydrolyzing with sulfuric acid aqueous solution. The effects of the whisker content on the morphology and properties of the glycerol-plasticized SPI composites were investigated by scanning electron microscopy, dynamic mechanical thermal analysis, differential scanning calorimetry, ultraviolet-visible spectroscopy, water-resistivity testing and tensile testing. The results indicated that, with the addition of 0 to 30 wt.-% of cellulose whiskers, strong interactions occurred both between the whiskers and between the filler and the SPI matrix, reinforcing the composites and preserving their biodegradability. Both the tensile strength and Young's modulus of the SPI/cellulose whisker composites increased from 5.8 to 8.1 MPa and from 44.7 to 133.2 MPa, respectively, at a relative humidity of 43%, following an increase of the whisker content from 0 to 30 wt.-%. Furthermore, the incorporation of the cellulose whiskers into the SPI matrix led to an improvement in the water resistance for the SPI-based composites.     

In situ preparation,characterization and performance of magnesium carbonate whiskers/cellulose fibers hybrid paper

Magnesium carbonate whiskers/cellulose fibers hybrid paper was successfully prepared via in situ synthesis process, and the flame retardancy and tensile strength properties were investigated. The effects of magnesium salt type, initial magnesium salt concentration, temperature, time and pH value were also detected. The hybrid paper was characterized by X-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy with energy dispersive X-ray spectroscopy and thermogravimetry-derivative thermogravimetry techniques, respectively. The results showed that the same whiskers/fibers hybrid paper could be prepared from different magnesium salts. If the pH was above 9.4, hydrated basic magnesium carbonate would be created, which would lead to the decrease of oxygen index (OI). Reaction time had no effect on the OI and tensile strength of the hybrid paper. Under the optimized conditions, the OI of the hybrid paper reached 28 %. The in situ synthesis process was much better than the direct addition process.     

氯化聚丙撑碳酸酯增容聚丙撑碳酸酯/秸秆粉复合材料的制备及性能

聚丙撑碳酸酯(PPC)是一种新型热塑性生物降解材料,但其热性能及力学性能较差,应用受到限制。以秸秆粉这种农作物副产品作为增强体改性PPC,既可以提高PPC的力学性能同时又可开发利用秸秆资源。氯化聚丙撑碳酸酯(CPPC)是聚丙撑碳酸酯(PPC)经过氯化得到的,对天然纤维表面具有良好的浸润性和粘结性。本文以CPPC为增容剂,通过熔融共混法制备了PPC/秸秆粉复合材料。采用扫描电子显微镜(SEM)、拉伸实验、动态力学性能测试(DMA)及转矩流变仪对复合材料的结构及性能进行了表征,重点考察了CPPC的添加量对复合材料力学和流变性能的影响。结果表明,当CPPC质量分数为1.8%时,可使添加质量分数为30%秸秆粉的PPC复合材料拉伸强度提高38%,模量提高30%。同时,CPPC的引入使复合材料的粘度下降,改善了PPC/秸秆粉复合材料的加工性能。因此,作为增容剂的CPPC为制备高性能PPC/天然纤维复合材料提供了新的解决办法。     

Morphology and interphase formation in epoxy/PMMA/glass fiber composites: effect of the molecular weight of the PMMA

In this work ternary composites based on an epoxy thermoset modified with a thermoplastic polymer and reinforced with glass fibers were prepared. The aim of this study is to analyze the influence of the molecular weight of the thermoplastic polymer on the final morphologies. To obtain tailor made interphases four poly(methylmethacrylate), PMMA, which differ in their molecular weight (34,000, 65,000, 76,000 and 360,000 g/mol) were chosen to modify the epoxy resin. The amount of PMMA in the composites was fixed to 5 wt.%. Neat polymer matrices (epoxy-PMMA without fibers) were also prepared for comparison. To study all systems dynamic mechanical analysis (DMA), atomic force microscopy (AFM) and scanning electron microscopy (SEM) were used. Although all the systems showed the typical phase separation in the epoxy/PMMA blend, DMA experiments revealed a new phase with more restricted mobility when the glass fibers are present. The amount of this phase increases as molecular weight of PMMA does. The morphologies as well as the fracture surface in the immediate surroundings of the fibers were found to be different from those observed further away from the surface of the fiber, suggesting therefore that, in this case, different fracture mechanism operates. These observations allow us to conclude that an interphase with specific properties is formed. This interphase is based on a polymer or a polymer blend (epoxy-PMMA) enriched in the component with lower mobility.     

Preparation and properties of graphene oxide nanosheets/cyanate ester resin composites

Graphene oxide nanosheets (GONSs)/cyanate ester (CE) resin composites were prepared via a solution intercalation method. The structures of the GONSs and the composites were studied using Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), transmission electron microscopy (TEM) and scanning electron microscopy (SEM). The mechanical and tribological properties of the composites were investigated. In addition, the thermal behavior of the composites was characterized by thermogravimetric analysis (TGA). Results show that the GONSs/CE resin composites were successfully prepared. The addition of GONSs is beneficial to improve the mechanical and tribological properties of the composites. Moreover, the composites exhibit better thermal stability in comparison with the CE resin matrix.     

Effect of Ionizing Radiation on the Characteristics of EPDM/UHMW-PE Composites

Ultra high molecular weight polyethylene (UHMW-PE) fibers were used in a chopped form and at different concentrations as a reinforcing material in ethylene–propylene–diene terpolymers (EPDM). The effect of radiation dose and fiber concentration on the mechanical properties of the vulcanized rubber composites obtained was measured. It was found that γ-irradiation improves the interfacial adhesion between UHMW-PE fiber (Spectra 1000) and EPDM matrix which was detected by scanning electron microscopy (SEM). In addition, the Young modulus of the composites increases as the irradiation dose increases. Increasing the concentration of the fibers up to 40 phr leads to an enhancement in mechanical properties and swelling resistance of obtained composites, especially in the absence of carbon black. The absolute value of the modulus increased by a factor of at least two with the addition of carbon black. Moreover the tear strength of reinforced and filled EPDM was improved with respect to reinforced rubber. © 1997 John Wiley & Sons, Ltd.     

Preparation of starch-based biocomposites reinforced with mercerized lignocellulosic fibers: Evaluation of their thermal,morphological, mechanical,and biodegradable properties

In the present paper, starch-based biocomposites have been prepared by reinforcing corn starch matrix with mercerized Abelmoschus esculentus lignocellulosic fibers. The effect of fiber content on mechanical properties of composite was investigated and found that tensile strength, compressive strength, and flexural strength at optimum fiber content were 69.1%, 93.7% and 105.1% increased to that of cross-linked corn starch matrix, respectively. The corn starch matrix and its composites were characterized by Fourier transform infrared spectroscopy (FT-IR), Scanning electron microscopy (SEM), X-ray diffraction (XRD) and thermogravimetric (TGA) analysis. The fiber reinforced composites were found to be highly thermal stable as compared to natural corn starch and cross-linked corn starch matrix. Further, water uptake and biodegradation studies of matrix and composites have also been studied.     

Effect of gamma radiation on the physico mechanical properties of recycled HDPE/modified sugarcane bagasse composite

In this work, the sugarcane bagasse (SCB) fibers were used as reinforcing filler for recycled high density polyethylene (rHDPE) to form eco-friendly composite. The SCB surface was chemically modified to improve the compatibility with rHDPE matrix. The SCB fibers were alkali modified using 10% sodium hydroxide (SCBm) and acetylated using acetic anhydride (SCBac). The chemically modified SCB fibers were characterized using Fourier transform infrared (FTIR) and scanning electronic microscopy (SEM). The composites were prepared by mixing of rHDPE with 15 phr (parts per hundred parts rHDPE) of different SCB samples. Neat rHDPE and its composites with SCB were irradiated by gamma radiation dose of 50–250 kGy. The Effect of gamma radiation on the water up-take, mechanical properties and the thermal stability of (rHDPE) and its composites was studied. The effect of gamma radiation on the compatibility between rHDPE and SCB was also investigated. The results showed that the combination between the chemical modification of fibers and the irradiation of polymer composites were more effective in compatibility improvement than chemical modification alone. The irradiated (at 100 kGy) composite containing of SCBac gave the best mechanical properties, lowest water up-take and the highest thermal stability.     

Interfacial effects on stress distribution in model composites

Raman mechanical spectroscopy was used to examine interfacial effects on the stress distribution in model polydiacetylene fiber/epoxy composites. Epoxy release agents were coated on fiber surfaces to modify the interfacial adhesion properties. The modified fiber surfaces were then characterized by scanning electron microscopy and x-ray photoelectron spectroscopy as well as optical microscopy. No difference in the maximum stress value or stress distribution was observed for the two types of fibers, coated or uncoated, used in composites. This suggests that adhesion properties at the composite interface do not affect tensile stress transfer efficiency nor, therefore, the composite tensile modulus along the fiber axis direction in uniaxial composites. Experimental data were also compared with theoretical calculations assuming perfect bonding between fiber and matrix, and idealized frictional force transfer mechanism at the fiber–matrix interface.     

Hydrophobic Silica Aerogels Strengthened with Nonwoven Fibers

Hydrophobic silica aerogels were prepared via a sol‐gel process by surface modification at ambient pressure. Nonwoven fibers were distributed inside the silica aerogels as a composite to act as a supporting skeleton which increased the mechanical property of the silica aerogels. The morphology and pore structure of the composites were characterized by scanning electron microscopy (SEM) and N₂ adsorption analyzer. The contact angle and the adsorption capacities of the composites were also determined. The results show that silica aerogels dispersed uniformly and maintained high porosity in the aerogel‐fiber composites. They have excellent hydrophobic properties and are excellent adsorptive materials.     

Property correlations for composites based on ethylene propylene diene rubber reinforced with flax fibers

EPDM composites filled with short flax fibers were prepared by melt blending procedure. The effects of fiber loading on the mechanical, thermal and water uptake characteristics were studied. The physico-mechanical, morphological thermal properties and water absorption behavior were discussed using tensile testing, differential scanning calorimetry, thermogravimetrical analysis and scanning electron microscopy. Scanning electron microscopy revealed that the flax fibers were well dispersed in the polymer matrix. The tensile strength and hardness of the composites were found to be improved at higher fiber loading. The water absorption pattern of EPDM/fiber composites at room temperature follows a Fickian behavior for composites with 10, 15 and 20 phr flax fiber.     

Thermal conductivity and properties of cyanate Ester/nanodiamond composites

The aim of this study was to improve thermal conductivity, thermal stability, and mechanical properties of bisphenol A dicyanate ester with the addition of nanodiamond. Cyanate ester/nanodiamond composites containing various ratios of nanodiamond were prepared. Thermal stability and thermal conductivity of the samples were evaluated by thermogravimetric analysis, differential scanning calorimetry, and laser flash method, respectively. The samples were characterized with the analysis such as gel content, water absorption capacity, and stress–strain test. Hydrophobicity of the samples was determined by contact angle measurements. Moreover, the surface morphology of the samples was investigated by a scanning electron microscopy. The obtained results prove that the cyanate ester/nanodiamond composites have good thermal and mechanical properties and can be used in many applications such as the electronic devices, materials engineering, and other emergent. Copyright © 2014 John Wiley & Sons, Ltd.     

The effect of silica morphology on properties of PVA/silica nano-composites

Two kinds of poly(vinyl alcohol)(PVA)-silica composites were prepared with different methods. One composite was prepared by directly mixing PVA with 80 nm silica nano-particles which were made from tetraethoxysilane(TEOS). The another was obtained by the mixing PVA and hydrolyzed TEOS in the presence of acid-catalyst. The properties of the two PVA/silica hybrids were characterized by means of scanning electron microscopy(SEM), UV-Visible spectroscopy,solubility tests, limiting oxygen index(LOI) test, tensile test and dynamical mechanical analysis(DMA), respectively. The results indicate that PVA-TEOS composites(PT for short) display more transparency than PVA-silica nano-particles hybrids(PS for short). At the same time, The PT composites presented more excellent performance than PS in water resistance, fire resistance and mechanical properties. Moreover, the Tg of PT increased with increasing TEOS content, while that of PS decreased.     

Thermal decomposition kinetics,flammability, and mechanical property study of wood polymer nanocomposite

Melamine formaldehyde-furfuryl alcohol copolymer was impregnated into softwood in combination with 1,3-dimethylol-4,5-dihydroxy ethyleneurea, a crosslinking agent, nanoclay, and a renewable polymer, collected as gum from a local plant (Moringa oleifera) under vacuum condition and polymerized by catalyst heat treatment. Fourier-transform infrared spectroscopy, X-ray diffractometry, and scanning electron microscopy were used to characterize the nanocomposites. Transmission electron microscopy showed uniform distribution of nanoclay in the composites. The mechanical properties were improved after the addition of plant polymer. The plant polymer had a marked influence on the flammability and thermal stability of the prepared composites. The apparent activation energy was determined by Ozawa-Flynn-Wall’s and Vyazovkin methods. The activation energy of the composites decreased up to a certain decomposed fraction thereafter it remained constant. Higher the plant polymer content higher was the activation energy of the prepared composites which indicated a better interfacial adhesion and thermal stability.     

Design and characterization of cellulose fibers with hierarchical structure for polymer reinforcement

This paper describes an approach to manufacture hierarchical composites from environmentally friendly materials by grafting cellulose whiskers onto regenerated cellulose fibers (Cordenka 700). Fourier Transform Infrared spectroscopy, Scanning Electron Microscopy and X-ray diffraction analysis were performed to verify the degree of modification. The mechanical properties of the unmodified and modified fibers were analyzed using fiber bundle tensile static and loading–unloading tests. To show the effect of cellulose whiskers grafting on the Cordenka fibers, epoxy based composites were manufactured and tensile tests done on transverse uni-directional specimens. The mechanical properties were significantly increased by fiber modification and addition of the nano-phase into composite reinforced with micro-sized fibers.     

A biocompatible composite based on poly(ε‐caprolactone fumarate) and hydroxyapatite

Fabrication of biodegradable composites applicable as hard tissue substitutes consisting of poly(ε‐caprolactone fumarate) (PCLF), methacrylic acid (MAA), and hydroxyapatite (HA) was investigated. PCLF macromers were synthesized by reaction of PCL diol with fumaryl chloride in the presence of propylene oxide and characterized by gel permeation chromatography, FTIR, and ¹H NMR spectroscopy. Composites were fabricated by incorporating HA as inorganic filler in PCLF matrix which followed by thermal curing of the composition using benzoyl peroxide and MAA as a free radical initiator and reactive diluent, respectively. Uniform distribution of the fine ceramic phase in the polymer matrix was elucidated by scanning electron microscopy. The effects of the initial macromer molecular weight and the filler volume fraction on mechanical properties and cytotoxicity of the composites were also examined. Significant enhancement in the mechanical properties was observed upon increasing HA content and/or initial PCLF molecular weight. The biocompatibility of the specimens was also improved with increasing ceramic phase. Copyright © 2010 John Wiley & Sons, Ltd.     

Effect of Chemical Treatment and Fiber Loading on Mechanical Properties of Borassus (Toddy Palm) Fiber/Epoxy Composites

The aim of the present study was to investigate and compare the mechanical properties of untreated and chemically modified Borassus fiber–reinforced epoxy composites. Composites were prepared by the hand lay-up process by reinforcing Borassus fibers with epoxy matrix. To improve the fiber-matrix adhesion properties, alkali (NaOH) and alkali combined with silane (3-aminopropyltriethoxysilane) treatment of the fiber surface was carried out. Examinations through Fourier transform-infrared spectroscopy and scanning electron microscopy (SEM) were conducted to investigate the structural and physical properties of the Borassus fibers. Tensile properties such as modulus and strength of the composites made with chemically modified and untreated Borassus fibers were studied using a universal testing machine. Based on the experimental results, it was found that the tensile properties of the Borassus-reinforced epoxy composites were significantly improved as compared with the neat epoxy. It was also found that the fiber treated with a combination of alkali and silane exhibited superior mechanical properties to alkali-treated and untreated fiber composites. The nature of the fiber/matrix interface was examined through SEM of cryo-fractured samples. Chemical resistance of composites was also found to be improved with chemically modified fiber composites.