Ni/MgO-Al2O3催化剂上高温焦油组分的催化转化

采用分步浸渍法制备了MgO-Al2O3负载的Ni基催化剂, 并运用N2吸附、载射线衍射(XRD)、透射电子显微镜(TEM)等手段进行表征. 该催化剂用于甲苯或萘为焦油模拟化合物的高温焦炉煤气(COG)的常压加氢裂解反应, 并考察了H2浓度、H2S对催化剂活性的影响. 结果表明: 催化剂还原后, 表面形成均匀分散、直径为8-14 nm的金属Ni纳米颗粒; 在较低的水碳摩尔比(nH2O/nC=0.28)时, 甲苯就能完全转化并选择性地加氢裂解形成CH4, 测试的时间内(480 min), 催化剂没有明显的失活和积炭现象, 显示出好的反应活性、稳定性和耐硫能力. 制得的Ni/MgO-Al2O3催化剂有望应用于较低水含量(10%-15%(φ, 体积分数))的高温焦炉煤气中焦油的直接转化.     

Ni/Ce-ZrO2/γ-Al2O3催化剂上高温焦炉煤气中焦油组分的常压加氢裂解

采用分步浸渍法制备了Ni/Ce-ZrO2/γ-Al2O3催化剂,并采用X射线衍射、透射电子显微镜、N2物理吸附和程序升温还原等方法对其进行了表征.该催化剂在以甲苯和萘为焦油模拟化合物的高温焦炉煤气常压加氢裂解反应中表现出良好的催化性能和一定的耐硫能力.在较低的水/碳摩尔比(S/C=0.44)条件下,甲苯和萘能够完全转化为小分子气体.向Ni/γ-Al2O3催化剂中加入适量的铈锆氧化物,能促使催化剂表面形成尺寸更小的镍纳米晶粒,并有效地抑制镍晶粒烧结,从而显著提高催化剂的稳定性.该类催化剂有望应用于具有较低水/碳摩尔比的高温焦炉煤气中焦油的直接除去.     

Ni/MgO/Al2O3催化剂上以1-甲基萘为模型化合物高温焦炉煤气焦油的催化转化

采用共浸渍薄水铝石(AlOOH)方法制备了一系列Ni/MgO/Al₂O₃催化剂, 并采用N₂气吸附及Ｘ射线衍射等手段进行了表征. 选择1-甲基萘作为焦油模型化合物, 研究了该催化剂催化转化具有较低水蒸气/碳摩尔比(n_H2O/n_C) 的高温焦炉煤气(COG)中焦油催化反应性能. 考察了催化剂中MgO含量及反应条件等对催化剂性能的影响. 实验结果表明, 在775 ℃和n_H2O/n_C=0.7条件下, MgO改性的Ni/MgO/Al₂O₃催化剂对1-甲基萘催化转化为小分子气体反应具有较好的催化活性和稳定性; 热重分析表明, MgO的加入能显著提高催化剂的抗积炭能力. 在Ni/MgO/Al₂O₃催化剂上, 反应气中高浓度H₂S气体(0.25%, 体积分数)能够促进焦油催化转化为小分子气体, 这可能是由于H₂S在Ni表面的可逆吸附形成更适合于重整反应的活性位, 同时抑制了烷烃裂解吸附形成的碳在金属中的溶解、扩散并最终形成积炭过程.     

NiO/MgxSi1-xOy 催化剂的制备及其在高温焦炉煤气中焦油组分催化裂解中的应用

采用溶胶-凝胶法制备了MgO和SiO2的二元复合氧化物载体,通过浸渍法制得NiO/MgxSi1-xOy催化剂,并使用Brunauer-Emmett-Teller(BET)吸附、X射线衍射(XRD)、透射电子显微镜(TEM)等时其进行表征.以甲苯和萘的混合物作为高温焦炉煤气中焦油组分的模型化合物,在固定床反应器中进行高温焦炉煤气中焦油组分催化裂解的研究.结果表明,催化剂的焙烧温度、反应空速以及载体中Mg和Si的原子比对反应活性有很大的影响.在反应温度800℃、水碳摩尔比为0.7的条件下,10%(w)NiO/Mg0.80Si0.20Oy催化剂能将甲苯和萘完全转化为CO、CH4等小分子气体,显示出很好的催化活性、稳定性以及好的抗积炭性能.     

NiO/MgxSi1-xOy催化剂的制备及其在高温焦炉煤气中焦油组分催化裂解中的应用

采用溶胶-凝胶法制备了MgO和SiO2的二元复合氧化物载体, 通过浸渍法制得NiO/MgxSi1-xOy催化剂, 并使用Brunauer-Emmett-Teller(BET)吸附、载射线衍射(XRD)、透射电子显微镜(TEM)等对其进行表征. 以甲苯和萘的混合物作为高温焦炉煤气中焦油组分的模型化合物, 在固定床反应器中进行高温焦炉煤气中焦油组分催化裂解的研究. 结果表明, 催化剂的焙烧温度、反应空速以及载体中Mg和Si的原子比对反应活性有很大的影响. 在反应温度800 益、水碳摩尔比为0.7的条件下, 10%(w)NiO/Mg0.80Si0.20Oy催化剂能将甲苯和萘完全转化为CO、CH4等小分子气体, 显示出很好的催化活性、稳定性以及好的抗积炭性能.     

不同催化剂条件下高温煤气中焦油组分的催化裂解

高温煤气净化技术是正在开发的煤气化联合循环发电(ＩＧＣＣ)和煤气化燃料电池(ＭＣＦＣ)的关键技术之一。高温煤气中焦油蒸汽通过催化裂解方法去除,不但可以排除焦油堵塞管道,腐蚀设备,而且可以提高发电效率。Ｂａｋｅｒ等[1]对模拟煤气中焦油催化裂解研究得出:在450～690℃和1010～1818ｋＰａ的条件下,ＹＺ-Ｙ82催化剂最好,焦油转化率达74%,同时催化剂积炭最高达055ｇｇ焦油。Ａｚｎａｒ等[2]研究了Ｎｉ基催化剂对生物质气化气体中焦油的催化裂解得出:在780～830℃的温度下,所有催化剂对焦油的脱除都显示出很高的活性,反应时间48ｈ内催化…     

生物质焦油组分甲苯在镍/凹凸棒石上的二氧化碳催化重整

 以大比表面积的天然纳米矿物材料凹凸棒石 (PG) 为载体, 采用等体积浸渍法制备了 Ni/PG 催化剂. 运用 X 射线衍射、透射电镜和 CO₂ 程序升温脱附对 Ni/PG 催化剂进行了表征, 并用于以甲苯为生物质焦油模型化合物的 CO₂ 催化重整反应. 考察了反应温度、CO₂ 浓度以及催化剂中 Ni 负载量对甲苯与 CO₂ 重整性能的影响. 结果表明, 吸附在催化剂表面的 CO₂ 存在三个脱附峰, 其中高温脱附 CO₂ 与反应密切相关; 随着 CO₂ 浓度、Ni 负载量和反应温度的增加, 甲苯转化率和 H₂ 产率升高. 在 800 ^oC, CO₂/PhCH₃ 摩尔比为 0.2~0.26 时, 甲苯转化率达最高; 而在 CO₂/PhCH₃ 摩尔比为 0.2 时, H₂ 产率最高. 催化剂上积炭量随 CO₂ 浓度的增加和反应温度的升高而显著降低.     

焙烧温度对Ni/MgO催化剂结构及其在甲苯二氧化碳重整反应中催化性能的影响(英文)

考察了焙烧温度对 Ni/MgO 催化剂结构及其在甲苯二氧化碳重整反应中催化性能的影响. 由于 NiO-MgO 固溶体的形成,样品的 X 射线衍射谱中没有出现明显的 NiO 衍射峰, 而在拉曼光谱中出现明显的散射信号. X 射线光电子能谱、氢气程序升温还原和 H2脉冲吸附结果表明, 高温焙烧过程中 Ni 向催化剂体相扩散, 与 MgO 发生强互相互作用, 使得 Ni 物种难以还原,但部分位于催化剂表面的 Ni 物种能够还原; 高温焙烧后催化剂表面活性 Ni 物种明显减少, 致使催化剂重整活性降低. 重整反应后, 催化剂表面存在少量多核芳烃类积炭, 这很可能是高温焙烧催化剂稳定性差的原因.     

SnO2-Nb2O5/MgAl2O4/α-Al2O3催化环氧乙烷水合制乙二醇

采用水热稳定的MgAl2O4尖晶石对-αAl2O3载体表面进行修饰,采用具有较强亲水性能的SnO2对活性组分Nb2O5进行修饰,制备了SnO2-Nb2O5/MgAl2O4/-αAl2O3催化剂,并用于环氧乙烷水合制乙二醇反应.采用X射线衍射、红外光谱和程序升温脱附研究了Sn/Nb摩尔比对催化剂酸性、环氧乙烷在催化剂表面的吸附状态和吸附强度以及催化剂性能的影响.结果表明,Sn/Nb摩尔比明显影响催化剂的组成和结构;催化剂的结构不同,环氧乙烷在催化剂表面的吸附强度存在明显差别,催化剂的催化性能明显不同.     

水蒸气对Ni/Ce-Zr-Al-Ox催化剂上CO2重整CH4瓜的影响

采用水热合成-负载法制备了Ni/Ce-Zr-Al-Ox催化剂,测试了该催化剂上CO2重整CH4反应的活性和稳定性,并考察了添加少量水蒸气对CO2重整CH4反应的影响.结果表明,在不含水蒸气的反应气中反应198 h后CH4和CO2的转化率分别为89%和98%,H2/CO摩尔比约为1.00,且没有任何失活.添加3.2%的水蒸气后,CH4转化率提高到94%,CO2转化率不变,H2/CO摩尔比约提高0.06,同时稳定性也很好.计算结果表明,添加少量水蒸气后,CO2重整CH4被促进,逆水煤气反应被抑制,而水蒸气重整CH4没有明显变化.     

Hydrocracking of Tar Components from Hot Coke Oven Gas over a Ni/Ce-ZrO2/γ-Al2O3 Catalyst at Atmospheric Pressure

Ni/Ce-ZrO₂/γ-Al₂O₃ catalysts with different Ce-ZrO₂ contents and Ni loadings were prepared by a two step impregnation method and characterized by X-ray diffraction, transmission electron microscopy, N₂ adsorption, and temperature-programmed reduction. The catalysts were used for the hydrocracking of toluene and naphthalene, which were model tar compounds in hot coke oven gas, under atmospheric pressure at 800 °C. They showed excellent catalytic activity, stability, and some sulfur tolerance. Both toluene and naphthalene was converted into light fuel gases even at a low mole ratio of steam to carbon (S/C = 0.44). During the testing period of 7 h, no coke deposition was observed on the surface of the catalysts. The results indicated that the addition of Ce-ZrO₂ limited the sintering of Ni particles and enhanced the catalytic activity. The Ni/Ce-ZrO₂/γ-Al₂O₃ catalyst is promising for the direct removal of tar compounds in hot coke oven gas with low S/C ratios.     

Hydrogen production from simulated hot coke oven gas by catalytic reforming over Ni/Mg（Al）O catalysts

Hydrogen production by catalytic reforming of simulated hot coke oven gas (HCOG) with toluene as a model tar compound was investigated in a fixed bed reactor over Ni/Mg(Al)O catalysts. The catalysts were prepared by a homogeneous precipitation method using urea hydrolysis and characterized by ICP, BET, XRD, TPR, TEM and TG. XRD showed that the hydrotalcite type precursor after calcination formed (Ni, Mg)Al₂O₄ spinel and Ni-Mg-O solid solution structure. TPR results suggested that the increase in Ni/Mg molar ratio gave rise to the decrease in the reduction temperature of Ni²⁺ to Ni⁰ on Ni/Mg(Al)O catalysts. The reaction results indicated that toluene and CH₄ could completely be converted to H₂ and CO in the catalytic reforming of the simulated HCOG under atmospheric pressure and the amount of H₂ in the reaction effluent gas was about 4 times more than that in original HCOG. The catalysts with lower Ni/Mg molar ratio showed better catalytic activity and resistance to coking, which may become promising catalysts in the catalytic reforming of HCOG.     

Hydrogen production from simulated hot coke oven gas by catalytic reforming over Ni/Mg(A1)O catalysts

Hydrogen production by catalytic reforming of simulated hot coke oven gas (HCOG) with toluene as a model tar compound was investigated in a fixed bed reactor over Ni/Mg(Al)O catalysts. The catalysts were prepared by a homogeneous precipitation method using urea hydrolysis and characterized by ICP,BET, XRD, TPR, TEM and TG. XRD showed that the hydrotalcite type precursor after calcination formed (Ni,Mg)Al2O4 spinel and Ni-Mg-O solid solution structure. TPR results suggested that the increase in Ni/Mg molar ratio gave rise to the decrease in the reduction temperature of Ni2+ to Ni0 on Ni/Mg(Al)O catalysts. The reaction results indicated that toluene and CH4 could completely be converted to H2 and CO in the catalytic reforming of the simulated HCOG under atmospheric pressure and the amount of H2 in the reaction effluent gas was about 4 times more than that in original HCOG. The catalysts with lower Ni/Mg molar ratio showed better catalytic activity and resistance to ceking, which may become promising catalysts in the catalytic reforming of HCOG.     

Partial oxidation of simulated hot coke oven gas to syngas over Ru-Ni/Mg（Al）O catalyst in a ceramic membrane reactor

Hydrogen amplification from simulated hot coke oven gas (HCOG) was investigated in a BaCo0.7Fe0.2Nb0.1O3−δ (BCFNO) membrane reactor combined with a Ru-Ni/Mg(Al)O catalyst by the partial oxidation of hydrocarbon compounds under atmospheric pressure. Under optimized reaction conditions, the dense oxygen permeable membrane had an oxygen permeation flux around 13.3 ml/(cm2·min). By reforming of the toluene and methane, the amount of H2 in the reaction effluent gas was about 2 times more than that of original H2 in simulated HCOG. The Ru-Ni/Mg(Al)O catalyst used in the membrane reactor possessed good catalytic activity and resistance to coking. After the activity test, a small amount of whisker carbon was observed on the used catalyst, and most of them could be removed in the hydrogen-rich atmosphere, implying that the carbon deposition formed on the catalyst might be a reversible process.     

透氧膜反应器内NiO/MgO催化焦炉煤气重整反应途径

对透氧膜反应器内焦炉煤气(COG)重整反应模型进行分析.通过H2+N2、CH4+N2、CO+N2和H2+CH4+N2混合气在透氧膜反应器内重整反应,以及有无催化剂下重整反应和催化剂床层厚度重整反应实验,推测焦炉煤气重整反应模型:首先焦炉煤气中H2在催化剂活性金属镍颗粒上吸附解离,解离后的氢向高活性位迁移"(三相界面")并与膜表面侧晶格氧(或O2-)反应生成H2O.同时CH4也可能在活性镍颗粒上裂解生成CH3*和H*,反应生成的H2O与膜表面催化剂上裂解的碳反应生成H2和CO.未反应完的H2O在催化剂床层内与剩余CH4反应生成H2和CO.     

助剂对镍基催化剂催化裂解生物质气化焦油性能的影响

 采用等体积浸渍法制备了不同助剂 (Fe, Mg, Mn 和 Ce) 修饰的镍-凹凸棒石粘土基催化剂 (Ni/PG), 并用于催化裂解生物质气化焦油反应. 采用 X 射线衍射和透射电子显微镜对 Ni/PG 催化剂进行了表征, 并用总碳分析仪测定了催化剂上的积炭. 结果表明, 助剂的种类及其含量对催化剂性能的影响显著, 在所选用的助剂中, Fe 助剂入最有利于提高 Ni/PG 催化剂上焦油的去除率和 H2 的收率, 且随助剂 Fe 含量的增加, 催化剂活性逐渐提高.