Fast ion chromatography using short anion exchange columns

A fast ion chromatographic system is described which uses shorter column lengths and compares various eluent profiles in order to maximise the performance without sacrificing the chromatographic resolution. Both isocratic and gradient elution profiles were considered to find the most efficient mode of separation. The separation and determination of seven target anions (chloride, chlorate, nitrate, chromate, sulfate, thiocyanate and perchlorate) was achieved using a short (4 mm ID, 50 mm long) column packed with Dionex AS20 high-capacity anion exchange material. A hydroxide eluent was used at an initial concentration of 25 mM (at a flow-rate of 1.0 mL/min) and two performance maxima were found. The maximum efficiency occurred at a normalised gradient ramp rate of 5 mM/t₀, resulting in a peak capacity of 16, while the fastest separation (<3 min) occurred at a normalised ramp rate of 30 mM/t₀. The retention time, peak width and resolution using the different eluent profiles on varying column lengths is also compared. Further investigations in this study determined that the highest peak capacity separation under gradient conditions could be approximated using an isocratic separation. The advantage of using this novel approach to approximate the maximum efficiency separation removes the need for column re-equilibration that is required for gradient elution resulting in faster analyses and enhanced sample throughput, with benefits in particular for multidimensional chromatography.     

Analysis of alkyl sulfonates and carboxylates using high performance ion chromatography

Summary A simple and general method for the determination of both C₁−C₁₀ alkyl sulfonates and alkyl carboxylates using the same basic methodology, based on High Performance ion Chromatography, using relatively simple eluent systems allowing fast analysis with both high sensitivity and accuracy is presented.     

The effect of temperature on the resolution of racemates on a chiral bonded packing incorporating N-formylphenylalanine

Summary The effect of temperature on the resolution of racemates was investigated with respect to the resolution of racemic mixtures of aminoacid esters and 2,2,2-trifluoro-1-(9 anthryl) ethanol. Generally the capacity factor (k′) was found to increase with decreasing temperature. The values of the difference in the standard change of molar Gibbs energy, (ΔΔG), between the more retained and the less retained enantiomer do not appear to vary in a particular fashion. The sign of the enthalpic (ΔΔH) and the entropic, (ΔΔS) quantities for all the mixtures also depend upon the nature of the solute mixture.     

The chromatographic behavior of arsenic compounds on anion exchange columns with binary organic acids as mobile phases

Summary Identification and quantification of arsenic compunds was performed with high- performance liquid chromatography (HPLC) and flame atomic absorption spectrometry (FAAS) as element-specific detector. Arsenous acid, methylarsonic acid, dimethylarsinic acid, arsenic acid, arsenobetaine, and arsenocholine were separated on two anion-exchange columns (Synchropak Q 300 and PRP-X 100) with different binary organic acids as mobile phases. The infleunce of chromatographic parameters, such as pH and the concentration of the mobile phase were investigated. An unusual chromatographic behavior of arsenous acid was observed when tartaric acid was used as mobile phase.     

Refolding human lysozyme produced as an inclusion body by urea concentration and pH gradient ion exchange chromatography

Summary A new dual-gradient ion exchange chromatographic method was developed to improve the refolding yield of human lysozyme produced inEscherichia coli as an inclusion body. The dissolved and stretched polypeptide chain in a concentrated non-ionic denaturant was adsorbed onto an ion exchange column and induced to refold by gradually decreasing the denaturant concentration and increasing pH in the flowing buffer. The dual gradients of denaturant concentration and pH provided a gradual change of the solution environment along the chromatographic column for the protein to refold, resulting in enhanced activity yield and purity. A post-separation was also studied using size-exclusion chromatography to remove protein aggregates and mis-folded proteins after the refolding step.     

Behaviour of selenium and tellurium species and their determination by ion chromatography

Summary An ion chromatographic method has been developed for the separation of Te (IV) and Se(IV) in hydrochloric acid mobile phases; the method has been used to determine tellurium in a high-purity non-stoichiometric semiconducting ZnCdTe-based material. Different cation-exchange columns (IonPac CS2, CS3, CS10), a mixed bed ion-exchange column (IonPac CS5), a multi-mode cation-exchange column (OmniPac PCX-500), anion-exchange columns (IonPac AS4, AS4A, AS5, AS5A, AS10, AS11) and a multi-mode anion-exchange column (OmniPac PAX-500) were evaluated for ion chromatographic separation of Se and Te and to study the chemical forms in which the analytes were eluted. The chromatographic data obtained enabled the calculation of both the sign and the chaarge of the eluting species.     

Potentiometric detection in ion chromatography using a metallic copper indicator electrode

Summary A metallic copper electrode housed in a suitable flowcell is shown to be a sensitive and versatile potentiometric detector for ion chromatography. This electrode may be used for direct or indirect detection of many inorganic anions and cations and also for organic acids. In the direct detection mode, electrode response is based on either complexation of copper ions at the electrode surface by eluted species, or on oxidation and reduction reactions for eluted species which are strong oxidants or reductants. Direct detection is therefore applicable to such species as amino acids, organic acids, chloride, bromide, iodide, chlorate, bromate and iodate. Indirect detection is possible for anions which do not complex copper ions, provided a copper complexing ligand (such as phthalate) is used in the eluent; cations which complex this ligand are also detectable. Indirect detection may be used for species such as nitrite, nitrate, acetate, formate, succinate, benzoate, alkaline earth ions and transition metal ions. Electrode calibration relationships are discussed and sample separations are presented, together with some typical detection limits attainable in the direct and indirect detection modes.Presented in part at a National Symposium on Ion Chromatography, held at the University of New South Wales, Kensington, Australia, Nov. 21, 1984.     

Preparation of silica-based cation-exchangers for use in ion chromatography

Summary A low exchange-capacity, silica-based cation-exchanger for use in ion chromatography has been synthesized. (p-Trimethylsilyl)benzyl-dimethylchlorosilane (TBDCS) reacts with trimethylsilyl chlorosulfonate (TMCS) to produce a compound sulfonated in the para position of the type ArSO₂OSi (CH₃)₃, which is bonded to 5 μm porous silica beads and hydrolysed to the corresponding arylsulfonic acid. The product is hydrophilic and has a high degree of sulfonation, efficiencies of packed columns reaching about 40,000–50,000 plates per meter for the separation of the Mn²⁺ ion. The new stationary phase has been applied to the ion chromatography of some organic and inorganic ions. It is notable that 14 lanthanides can be separated by isocratic elution about one hour on a 150×4·6 mm column, with 4 mM ethylenediamine and 6 mM α-hydroxyl-isobutanoic acid (pH 3.67) as mobile phase. The work was supported by the National Science Foundation of China.     

Analysis of selected ionic liquid cations by ion exchange chromatography and reversed-phase high performance liquid chromatography

The chromatographic behavior of 8 ionic liquids - 7 homologues of 1-alkyl-3-methylimidazolium and 4-methyl-N-butylpyridinium - has been investigated with a strong cation exchange adsorbent. In particular, the dependence of the retention properties of these solutes on mobile phase composition, pH, and buffer concentration was evaluated with the aim of optimizing and improving the selectivity and retention of solute separation. While using the SCX stationary phase, several interactions occurred with varying strengths, depending on the mobile phase composition. Cation exchange, nonspecific hydrophobic interactions, and adsorption chromatography behavior were observed. Reversed phase chromatography occurred at low concentrations of acetonitrile, electrostatic and adsorption interactions at higher organic modifier concentrations. Elevated buffer concentrations lowered the retention factors without affecting the selectivity of ionic liquids. Obtained results were further compared to the chromatographic behaviour of ionic liquids in the reversed phase system. All analyzed ionic liquids follow reversed-phase behavior while being separated. Much lower selectivity in the range of highly hydrophilic compounds is obtained. This suggests preferred use of ion chromatography for separation and analysis of compounds below 4 carbon atoms in the alkyl side chain.     

Packing and performance of microbore columns for adsorption and partition chromatography

Summary Microbore columns of 1 mm i.d. have turned out to be very suitable for the achievement of efficient columns.The packing procedure for stainless steel 1 mm i.d. columns from 5 to 100 cm in length was studied. Stationary phases used were: pure silica gel, octyl, octadecyl and amino bonded silicas. The main parameters (slurry composition, packing system, choice of materials) are discussed.Short columns packed with 3 or 5m particles allow high speed separations. A separation in 18 seconds is described.Very high plate numbers can be obtained with long columns. With 7–8m particles, a 1 m column can produce 50,000 plates (h=3). Columns can be joined without loss of efficiency. 270 000 theoretical plates were obtained on a 6 m adsorption column with a test mixture. In reversed-phase chromatography, bile acid sodium salts can be separated on a 1 m column. In adsorption chromatography, details are given of the separation of a polystyrene oligomer sample, as well as a light and a heavy petroleum distillate samples on a 2 m column with refractive index detection in the last-case.     

Optimization of stepwise gradient elution in columns chromatography

Summary A general equation for the final retention of a solute chromatographed under conditions of stepwise gradient elution has been derived. The elution process and the distances travelled by solutes as a function of eluent volume were simulated by computer for the optimization of stepwise gradient prorams from isocratic HPLC data. The validity of the equations was experimentally veritied.     

A new procedure, based on combustion to sulphate and ion chromatography for the analysis of elemental sulphur in sediments

Summary A procedure exploiting the bomb preparation method for the analysis of total sulphur in organic materials has been developed for the determination of zero-valent sulphur (S^o) in sediments. Sediment samples were dried over magnesium oxide and sonicated in the presence of toluene to extract S^o. Toluene solutions were directly oxidized by combustion in a bomb containing sodium carbonate-bicarbonate buffer, which trapped sulphur species generated from S^o as sulphate ions. These were in turn analysed by suppressed anion chromatography with ion-conductivity detection. The method was used to determine the distribution of S^o in saltmarsh sediment cores.     

Preparation and chromatographic performance of polymer-based anion exchangers for ion chromatography: A review

In the last decade the developments in the field of ion chromatography (IC) were aimed at increasing the efficiency, sensitivity and rapidity of analysis, as well as on improving separation selectivity. Since selectivity and efficiency to the large extent depend on the surface chemistry of the stationary phase, the development of novel anion exchangers remains one of the priority tasks in modern IC. The exact chemistry of commercially available resins is not known and not many literature data devoted to the procedures of preparing anion exchangers for IC have become available in the last 10–15 years. However, the knowledge about the surface chemistry of anion exchangers can provide understanding of the trends in selectivity and efficiency changes, as well as help with the choice of the stationary phase type suitable for solving a particular analytical task. The current review is devoted to the methods of preparing anion exchangers based on polystyrene-divinylbenzene (PS-DVB) and ethylvinylbenzene-divinylbenzene (EVB-DVB) for IC of inorganic and small organic anions and is aimed at demonstrating the improvement of their performance over the years, which was brought by the development of the new types of stationary phase architecture.     

Determination of short chain aliphatic acids in silage effluents by ion exclusion chromatography

Summary Short chain aliphatic acids are important components of the dissolved organic matter in silage effluents. Although ion exclusion chromatography offers some advantages for the analysis of these compounds, no attempt has yet been made to prove the suitability of this method for silage effluent analysis. In order to gain experience in this field, the separation characteristics of a Dionex ion exclusion column (IonPac-ICE As5) have been evaluated, the separation conditions have been improved, and several sample clean-up methods have been checked.Ten effluents generated during silaging of five different crops were collected from Bavarian farms and analyzed. Lactic and acetic acids were the predominant aliphatic acids. Pyruvic, formic, propionic, and succinic acid were detected in all samples, whereas glyceric and iso-citric acid were found in a few samples only.If some restrictions of substance specificity and separation efficiency can be accepted, the analytical method presented will be a reliable tool for the analysis of carboxylic acids in silage effluents.     

Separation of acid whey proteins on the preparative scale by hyperdiffusive anion exchange chromatography

Summary The eluent flow through a fixed bed of a strong anion-exchanger Q Hyper D/F packing has been characterized by mean of the residence time distribution and the separation conditions of acid whey proteins have been established. Myoglobin under non-retaining conditions was used as a test protein because its molecular weight was close to that of α-lactalbumin, the target protein of this study. In the interstitial velocity range of 44–350 cm h⁻¹ a constant reduced height equivalent to a theoretical plate of 13 was observed. Nearly pure fractions of the five main acid whey proteins were obtained on the preparative scale for a gradient slope of NaCl 1 mM mL⁻¹, in the pH range of 6–8 and an interstitial velocity of 127 cm h⁻¹ (flow rate of 2 mL min⁻¹). A separation focused on a pure fraction of α-lactalbumin was achieved at pH 7.5 and was effective up to an interstitial velocity of 500 cm h⁻¹ (flow rate of 8 mL min⁻¹). An indepth characterization of α-lactalbumin by electrospray ionization—mass spectrometry showed that 15% of α-lactalbumin was lactosylated both in the collected fraction and in the acid whey protein concentrate used as feed.     

Salt effects in anion exchange displacement chromatography: Comparison of pentosan polysulfate and dextran sulfate displacers

Summary Experimental studies were carried out to investigate the utility of pentosan polysulfate as a low molecular weight polyelectrolyte displacer for the purification of proteins in anion-exchange displacement systems. In addition, the influence of mobile phase salt concentration on displacer efficacy, protein-protein resolution, and displacement development were studied for several anionic displacers. It was found that while large polyelectrolytes (50 kd dextran sulfate) were efficient displacers for a wide range of salt concentrations, relatively small polyelectrolytes (3 kd pentosan polysulfate) were seen to act as an efficient displacer only under conditions of high salt micro-environments. In addition, for proteins exhibiting similar affinities, zone mixing at the protein-protein boundary was found to be quite sensitive to the salt concentration. Finally, displacement chromatography was successfully implemented for the separation of proteins from milk whey.     

Potentiometric detection of monovalent anions separated by ion chromatography using all solid-state contact PVC matrix membrane electrode

Summary An all solid-state contact tubular PVC-matrix membrane electrode has been applied for potentiometric detection of inorganic and organic monovalent anions using phosphate and hydrogen phosphate eluents at low concentrations. This is a “monovalent detection method” as the selectivity of the electrode towards monovalent anions results in some other anions being undetected unless the concentration of those other anions is higher than 10⁻³ mol dm⁻³ in the sample solution injected. It takes only eight minutes to complete the separation with a good resolution. Theoretical and practical considerations are discussed, and in particular, sensitivity, linearity, detection limit and dynamic behaviour are presented. The use of an all solid-state contact bromide-selective electrode as a detector offers so far the best simultaneous sensitivity toward all anions when compared with other detection methods. Determination of Cl⁻ and NO₃ ⁻ ions in river, rain and drinking water samples without any further sample preconcentration has been successfully achieved. The detection limit is sub-ppb for most of anions in a 20 μL injection volume.     

Simultaneous determination of inorganic and organic acids in air by use of annular denuders and ion chromatography

Summary The performance of KOH-coated annular denuders for simultaneous collection of gas-phase atmospheric organic and inorganic acids has been evaluated by ion chromatography (IC) with an NaOH−H₂O gradient. Sampling efficiency was tested for formic and acetic acids under dry and humid air conditions. With this method several mono- and dicarboxylic acids, nitric acid, and hydrogen chloride can be detected. Laboratory and field measurements confirmed the reliability of the denuder method and its superior versatility compared with other techniques (scrubbing by means of a nebulizer, cryogenic trapping) which cannot be used to determine termine gaseous inorganic acids.     

Separation of aliphatic and aromatic amines by the ion interaction reagent RP-HPLC technique

Summary Ion interaction reagent RP-HPLC has been employed for the separation of some typical aliphatic and aromatic amines. The effects on retention of the alkyl chain length of the eluent, and of the eluent flow-rate have been studied. The use of solutions of hexylaminium-, octylaminium-and decylaminium-salicylate has been tested and compared, employing both conductometric and spectrophotometric detection. On the basis of the results obtained, the optimal experimental conditions can be chosen for each separation. Aliphatic and aromatic mono and diamines can be separated and detected, with an average sensitivity of the order of 40 ng without any pretreatment or derivatization. The retention data obtained for amines, compared with those obtained with the same ion interaction reagents for anions, help in the interpretation of the mechanism involved in the technique.