Synthesis and photochemistry of 3-(o-stilbeneyl)-4-H/Me/Ph-sydnones; intramolecular cyclization to 1,2-benzodiazepines and/or quinolines

Stilbeneylsydnone derivatives were synthesized by a sequence of reactions in good yields. Irradiation of 3-stilbeneyl-4-methylsydnone 4 gives 1H-1,2-benzodiazepine derivative 7 as the main product along with 2-methylquinoline derivative 20. Irradiation of 3-stilbeneyl-4-phenylsydnone 5 afforded only 1H-1,2-benzodiazepine derivative 8 whereas on irradiation of 4-unsubstituted 3-stilbeneylsydnone 3 no benzodiazepine derivative was detected. An efficient novel photochemical approach to 1H-1,2-benzodiazepines has been found from the new 3-(o-stilbeneyl)-4-substituted-sydnones via intramolecular 1,7-electrocyclization reaction of the photogenerated nitrile imines.     

Synthesis of methylene- and difluoromethylenephosphonate analogues of uridine-4-phosphate and 3-deazauridine-4-phosphate

Cytidine triphosphate synthetase (CTPS) catalyzes the formation of cytidine triphosphate from glutamine, uridine-5'-triphosphate (UTP), and adenosine-5'-triphosphate. Inhibitors of CTPS are of interest because of their potential as therapeutic agents. One approach to potent enzyme inhibitors is to use analogues of high energy intermediates formed during the reaction. The CTPS reaction proceeds via the high energy intermediate UTP-4-phosphate (UTP-4-P). Four novel analogues of uridine-4-phosphate (U-4-P) and 3-deazauridine-4-phosphate (3-deazaU-4-P) were synthesized in which the labile phosphate ester oxygen was replaced with a methylene and difluoromethylene group. The methylene analogue of U-4-P, compound 1, was prepared by a reaction of the sodium salt of tert-butyl diethylphosphonoacetate with protected, 4-O-activated uridine followed by acetate deprotection and decarboxylation. It was found that this compound undergoes relatively facile dephosphonylation presumably via a metaphosphate intermediate. The difluoromethylene derivative, compound 2, was prepared by electrophilic fluorination of protected 1. This compound was stable and did not undergo dephosphonylation. Synthesis of the methylene analogue of 3-deazaU-4-P, compound 3, was achieved by ribosylation of protected 4-(phosphonomethyl)-2-hydroxypyridine. Electrophilic fluorination was also employed in the preparation of protected 4-(phosphonodifluoromethyl)-2-hydroxypyridine which was used as the key building block in the synthesis of difluoro derivative 4. These compounds represent the first examples of a nucleoside in which the base has been chemically modified with a methylene or difluormethylenephosphonate group.     

Partial Synthesis of 3′-Hydroxy-2′-deoxy-2″,3″,4″,5″-tetrahydroverrucarin A. Verrucarins and roridins, 38th Communication [1]

The macrocyclic trichothecene triester 3′-hydroxy-2′-deoxy-2",3",4",5"-tetrahydroverrucarin A ( 37 ), has been synthesized starting from the sesquiterpene alcohol verrucarol ( 3 ), adipic acid and a derivative of mevalonic acid ( 14 ). The latter has been prepared from 4-(tetrahydro-2-pyranyloxy)-2-butanone ( 9 ).     

Claisen-Umlagerung von 2-Propinyl-(3-pyridyl)-und Allyl-(3-pyridyl)äthern

Claisen Rearrangement of 2-Propinyl (3-Pyridyl) and Allyl (3-Pyridyl) Ethers

1 Verbindungen vom Typ 1 werden mit Ausnahme von 17 und 25 als Äther benannt. Der systematische Name von 1 ist: 3-(2-Propinyl)oxy-pyridin.

2-Propinyl (3-pyridyl) ether ( 1 ), synthesized from the corresponding 3-pyridinol, was heated in DMF or decane at 208° in a sealed tube. In this way the furopyridines 2 and 3 were formed, and furthermore the pyranopyridine 4 if decane was used as solvent (Scheme 1). The same reactions took place with (2-methyl-3-pyridyl) 2-propinyl ether ( 14 ). In DMF only 15 , and in decane 16 as well as 15 were formed (Scheme 3). The rearrangement of the pyridine derivative 17 , which is substituted in both O-positions to the ether moiety, gave in both DMF and decane the diastereoisomeric tetracyclic compounds 18 and 19 . The same kind of reaction took place with 25 (Scheme 4). In the thermolysis of the allyl 3-pyridyl ether ( 27 ) cyclization was observed, too. The isolated product has the structure of the dihydrofuropyridine 28 (Scheme 6). The substituted allyl 3-pyridyl ether 30 reacted in the same way to the dihydrofuropyridine 31 (Scheme 6).     

Pyridazine Derivatives and Related Compounds,Part 1. Some Reactions with 4-Cyano-5,6-Diphenyl-2,3-Dihydropyridazine-3-One

4-Cyano-5,6-diphenyl-2,3-dihydropyridazine-3-onc 1 reacts with phosphorous oxychloride to give 70% of the corresponding 3-chloro derivative 2. Treating 2 with anthranilic acid in butanol, 4-cyano-2,3-diphenyl-10H-pyridazino[6,1-b]quinoxaline-10-one, 3 was obtained. Compound 1 reacts with phosphorous pentasulphide to give 3-mercapto derivative 4, which was converted by acrylonitrile to S-(2-cyanoethyl)pyridazine derivative 5. Compound 4 reacts with ethyl bromoacetate and with phenacyl bromide gave the corresponding thieno[2,3-c] pyridazine derivatives 8, 9, Alkylation of 1 with ethyl chloroacetate afforded 3-0-carbethoxymethyl derivative 10. Compound 10 reacts with amines (aniline, hydrazine) to give the corresponding amide and acid hydrazide 13, 12 respectively. Hydrolysis of 10 with sodium hydroxide gave the corresponding acid derivative 11. Treating 1 with methyl iodide, 3-0-methyl derivative 14 was obtained, which was converted by ammonium acetate/acetic acid to 3-amino-4-cyano-5,6-diphenyl pyridazine 15. Compound 1 reacts with methyl magnesium iodide gave 4-acetyl derivative 16, which was reacted with hydrazine, phenyl hydrazine and with hydroxylamine to give the substituted I H pyrazolo [3,4-c] pyridazine 17 a,b and isoxazolo [5,4-c] pyridazine 18 derivatives respectively.     

Biomimetic Mussel Adhesive Inspired Clickable Anchors Applied to the Functionalization of Fe3O4 Nanoparticles

The functionalization of magnetite (Fe₃O₄) nanoparticles with dopamine‐derived clickable biomimetic anchors is reported. Herein, an alkyne‐modified catechol‐derivative is employed as the anchor, as i) the catechol‐functional anchor groups possess irreversible covalent binding affinity to Fe₃O₄ nanoparticles, and ii) the alkyne terminus enables further functionalization of the nanoparticles by the grafting‐onto approach with various possibilities offered by ‘click’ chemistry. In the present work, azido‐end group functionalized Rhodamine and poly(ethylene glycol) (PEG) are utilized to coat the iron oxide nanoparticles to make them fluorescent and water soluble.

     

Calix[4]arene derivatives monosubstituted at all four methylene bridges

The scope of the reaction of the tetrabromocalixarene derivative 2b with alcohols under solvolytic conditions in trifluoroethanol (TFE) or hexafluoroisopropanol (HFIP) was explored. The reaction proceeded readily with MeOH, EtOH, n-PrOH, ethylene glycol and i-PrOH affording preferentially the rccc isomer of the tetrasubstituted product. The methoxy derivative 6a undergoes isomerization upon attempted recrystallization from CHCl3/MeOH and its rcct and rctt forms were characterized by X-ray crystallography. Incorporation of hydroxy groups on the bridges was accomplished via solvolysis in AcOH, followed by LiAlH4 reduction of the acetoxy groups. Reaction of the tetra-(2-methylfuranyl)calixarene derivative 11 with benzyne followed by deoxygenation with Me3SiCl/NaI afforded in low yield the tetra-(4-methylnaphthyl)calix[4]arene derivative 12. Reaction of de-tert-butylated tetrabromo derivative 2a with m-xylene in HFIP followed by methylation of the crude product afforded the tetraxylyl derivative 14.     

Discovery of 2-aminothiazole-4-carboxamides, a novel class of muscarinic M(3) selective antagonists, through solution-phase parallel synthesis

Synthesis and structure-activity relationship of a new class of muscarinic M(3) selective antagonists were described. In the course of searching for a muscarinic M(3) antagonist with a structure distinct from those of the 2-(4,4-difluorocyclopentyl)-2-phenylacetamide derivatives, we identified a thiazole-4-carboxamide derivative (1) as a lead compound in our in-house chemical collection. Since this compound (1) showed relatively low binding affinity (K(i)=140 nM) for M(3) receptors in the human binding assays, we tried to improve its potency and selectivity for M(3) over M(1) and M(2) receptors by derivatization of 1 through a combinatorial approach. A solution-phase parallel synthesis effectively contributed to the optimization of each segment of 1. Thus, we have identified a cyclooctenylmethyl derivative (3e) and a cyclononenylmethyl derivative (3f) as representative M(3) selective antagonists in this class.     

Synthesis and Chemical Behaviour of 4, 5-Dideoxy-4, 5-Epithio-2, 3-DI-0-Methanesulfonyl-L-Xylose Dimethyl Acetal

ABSTRACT

Selective substitution of the primary sulfonate group in 2, 3, 4, 5-tetra-0-methanesulfonyl-D-arabinose dimethyl acetal (1) gives 5-S-acetyl-2, 3, 4-tri-0-methanesulfonyl--5-thio-D-arabinose dimethyl acetal (2) which is further converted into the title compound (3). Reductive desul-furization of 3 afforded deoxy dimethyl acetal derivatives 5 and 6 in a low yield. Unsaturated monosaccharide derivative 7 was obtained as the only reaction product from 3 with triphenylphosphine. Catalytic hydrogenation of 7 gave dideoxy-sugar 6 in a satisfactory yield. Finally, epi-sulfide 3 with acetyl chloride afforded 4-chloro-4-deoxy derivative 4, which can be recycled into the starting 3.     

Stereoselective synthesis of the nonproteinogenic amino acid (2S,3R)-3-amino-2-hydroxydecanoic acid from (4S,5S)-4-formyl-5-vinyl-2-oxazolidinone

(4S,5S)-4-Formyl-5-vinyl-2-oxazolidinone (4b), which is readily obtained via a zinc-silver-mediated reductive elimination of alpha-d-lyxofuranosyl phenyl sulfone (3b), is successfully converted to the naturally occurring, nonproteinogenic amino acid (2S,3R)-3-amino-2-hydroxydecanoic acid (2). Also in this study, a facile "oxazolidinone rearrangement" reaction is uncovered during the attempted formation of the (methylthio)thiocarbonate derivative of the oxazolidinone alcohol 7.     

Zintl-Verbindungen mit Gold: M3AuSn4 mit M = K,Rb, Cs und M3AuPb4 mit M = Rb,Cs

Zintl-Compounds with Gold: M₃AuSn₄ with M = K, Rb, Cs and M₃AuPb₄ with M = Rb, Cs Silver coloured, brittle single crystals of the compounds M₃AuSn₄ with M = K, Rb, Cs and M₃AuPb₄ with M = Rb, Cs were synthesized by reactions of alkali metal azides (MN₃) with gold sponge and tin (lead) powder at T = 923 K. The structures of the isotypic compounds (space group Pmmn, Z = 2) were determined from X-ray single-crystal diffractometry data (see ‘‘Inhaltsübersicht”︁”︁). The Zintl-compounds M₃AuE(14)₄ with E(14) = Sn, Pb contain [AuE(14)₄]-chains with P₄-analogous E(14)₄-tetrahedra which are connected by μ₂-bridging gold atoms.     

MP2 and DFT calculations on circulenes and an attempt to prepare the second lowest benzolog, [4]circulene

MP2 and DFT calculations have been carried out for [n]circulenes for n=3 to 20 in order to predict the strain energy and topology of these cyclically condensed aromatic systems. To synthesise [4]circulene (2), 1,5,7,8-tetrakis(bromomethyl)biphenylene (14) was prepared from the corresponding tetramethyl derivative (8) and subjected to various dehalogenation reactions; all attempts to obtain [2.2]biphenylenophane (7) as a precursor for 2 by this route failed. Treatment of 14 with sodium sulfide furnished the thiaphanes 16 and 17, thermal and photochemical desulfurization of which also failed to provide 7. In a second approach [2.2]paracyclophane was converted to the pseudo-geminal dithiol 23, which was subsequently bridged to the thiaphanes 22 and 24. On flash vacuum pyrolysis at 800 degrees C these were converted exclusively into phenanthrene (30). An approach to dehydrochlorinate the commercial product PARYLENE C to the tetrahydro[4]circulene 7 led only to polymerisation. The X-ray structures of the intermediates 8, 14, 17, 23, 24, 26, and 35 are reported.     

Acetals of lactams and acid amides. 47. Investigation of the behavior of substituted 6-(Β-dimethylamino) vinyl-4-pyrimidinones in acidic media. Synthesis of 3-cyano-4-anilino-5-formyl-2-pyridone and 3-chloro-4-cyanobenzo[b] [1,6]-naphthyridine

The hydrolysis of 1-substituted 5-cyano-6-(-dimethylamino)vinyl-4-pyrimidinones in acidic media was studied. It was shown that the 1-benzyl derivative is converted to a mixture of -cyano--benzylamino-crotonamide and 3-cyano- and 3-carbamido-4-benzyl-amino-2-pyridones. The principal product in the hydrolysis of the 1-phenyl derivative is 3-cyano-4-anilino-5-formyl-2-pyridone. Cyclization of the latter by heating in phosphorus oxychloride leads to 3-chloro-4-cyanobenzo[b] [1, 6]naphthyr idine.See [1] for Communication 46.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 8, pp. 1118–1123, August, 1986.     

Structure and reactivity of 3- and 4-[(4′-chlorophenyl)sulfamoyl]-1-diazoalkan-2-ones

Conclusions Under the conditions of the acidic cyclization reaction of homologous 3- and 4-[(4-chlorophenyl)sulfamoyl]-1-diazoalkan-2-ones, the formation of the five-membered heterocycle, a pyrrolidin-3-one derivative, is more convenient than the formation of the four-membered heterocycle- an azetidin-3-one derivative. These results are in agreement with the differences in conformations of diazoalkane molecules in the crystalline state.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 1, pp. 134–138, January, 1986.     

Synthesis of some new pyrazoloquinazolinone and quinazolinone derivatives

The benzoxazinone derivative 2‐(6,8‐dibromo‐4‐oxo‐4H‐benzo[d]‐1,3‐oxazin‐2‐yl)‐3‐(4‐methoxyphenyl) acrylonitrile ( 1 ) has been used as a starting material for preparation of the hitherto unknown pyrazoloquinazolinone and quinazolinone derivatives. Under different conditions the benzoxazinone ( 1 ) was reacted with hydrazine hydrate to provide the pyrazolocarbonitrile derivative ( 2 ) and the azine derivative ( 3 ) and/or the pyrazoloquinazoline derivative ( 4 ). When ( 4 ) was conducted to react either with EAA (ethyl acetoacetate) or Ac₂O/AcOH (acetic anhydride/acetic acid) mixture or phthalic anhydride/acetic acid mixture, the pyrazoloquinazoline carbonitrile ( 5 ), pyrazolo‐quinazoline acetic acid ( 6 ) or the pyrazoloquinazolinone derivative ( 7 ) were formed respectively. When ( 1 ) was reacted with phenylhydrazine, a mixture of the quinazolinone derivative ( 8 ) and the hydrazone derivative ( 9 ) were obtained. The benzoxazinone derivative ( 1 ) was found also to react with benzylamine in ethanol or without solvent to give the quinazolinone derivative ( 10 ) or the quinazolindione ( 11 ) respectively. Fusion of ( 1 ) with ammonium acetate yielded the quinazolinone ( 12 ), which was methylated to give ( 13 ) and thiated to the thioxyquinazoline derivative ( 14 ), while reaction of ( 1 ) with formamide gave the N‐formylquinazoline derivative ( 15 ).     

Synthesis and characterization of imidocubanes with exocube Ge(IV) and Sn(IV) substituents: [M(mu3-NGeMe3)]4 (M = Sn, Ge, Pb); [Sn(mu3-NSnMe3)]4

The heteroleptic lithium amide, [(Me3Sn)(Me3Ge)NLi.(Et2O)]2 (2), reacts with MCl(2) (M = Sn, Ge, Pb) to yield the corresponding cubane complexes [M(mu3-NGeMe3)]4 [M = Sn (3), Ge (4), Pb (5)]. In an analogous reaction with SnCl2, the lithium stannylamide, [(Me3Sn)2NLi.(Et2O)]2 (1), produces the mixed-valent Sn congener [Sn(mu3-NSnMe3)]4 (6). All imidocubanes contain both di- and tetravalent group 14 metals that are bridged by N. These structures are comprised of M4N4 (M = Sn, Pb, Ge) cores that possess varying distortion from perfect cube geometry. The Pb derivative (5) exhibits enhanced volatility and vapor-phase integrity.     

Synthesis of (±)-4′-ethynyl-5′,5′-difluoro-2′,3′-dehydro-3′-deoxy- carbocyclic thymidine: a difluoromethylidene analogue of promising anti-HIV agent Ed4T

Synthesis of (±)-4′-ethynyl-5′,5′-difluoro-2′,3′-dehydro-3′-deoxy-carbocyclic-thymidine (8) was carried out. The difluoromethylylidene group of 8 was constructed by the electrophilic fluorination to the cyclopentenone 11 by using Selectfluor^®. Introduction of thymine base was investigated based on the Mitsunobu reaction by employing cyclopentenyl allyl alcohols variously substituted at the 4-position. It was found the 4-methoxycarbonyl derivative 14 gave the highest selectivity both in terms of regio- and stereochemistry.     

Two new structurally related strontium gallium nitrides: Sr4GaN3O and Sr4GaN3(CN2)

The strontium gallium oxynitride Sr(4)GaN(3)O and nitride-carbodiimide Sr(4)GaN(3)(CN(2)) are reported, synthesized as single crystals from molten sodium at 900 degrees C. Red Sr(4)GaN(3)O crystallizes in space group Pbca (No. 61) with a = 7.4002(1) Angstroms, b = 24.3378(5) Angstroms, c = 7.4038(1) Angstroms, and Z = 8, as determined from single-crystal X-ray diffraction measurements at 150 K. The structure may be viewed as consisting of slabs [Sr(4)GaN(3)](2+) containing double layers of isolated [GaN(3)](6-) triangular anions arranged in a "herringbone" fashion, and these slabs are separated by O(2-) anions. Brown Sr(4)GaN(3)(CN(2)) has a closely related structure in which the oxide anions in the Sr(4)GaN(3)O structure are replaced by almost linear carbodiimide [CN(2)](2-) anions [Sr(4)GaN(3)(CN(2)): space group P2(1)/c (No. 14), a = 13.4778(2) Angstroms, b = 7.4140(1) Angstroms, c = 7.4440(1) Angstroms, beta = 98.233(1) degrees, and Z = 4].     

Phosphaniminate von Alkalimetallen: Die Kristallstrukturen von [KNPCy3]4, [KNPCy3]4·2OPCy3, [CsNPCy3]4·4OPCy3 und [Li4(NPPh3)(OSiMe2NPPh3)3(DME)]

The alkalimetal phosphoraneiminates [KNPCy₃]₄, ( 1 ) [KNPCy₃]₄·2OPCy₃ ( 2 ) and [CsNPCy₃]₄·4OPCy₃ ( 3 ) (Cy = cyclohexyl) which are obtainable by the reaction of pottassium amide or cesium amide with Cy₃PI₂ or Cy₃PBr₂ in liquid ammonia, as well as the lithium derivative [Li₄(NPPh₃)(OSiMe₂NPPh₃)₃(DME)] ( 4 ) have been characterized by crystal structure determinations. 4 has been formed by the insertion reaction of silicon greaze (‐OSiMe₂)n into the LiN bonds of [LiNPPh₃]₆ in DME solution (DME = 1, 2‐dimethoxyethane). 1 : Space group P&1macr;, Z = 2, lattice dimensions at 193 K: a = 1389.8(1); b = 1408.1(1); c = 2205.2(2) pm; α = 78.952(10)?; β = 81.215(10)?; γ = 66.232(8)?; R1 = 0.0418. 2 : Space group Pbcn, Z = 4, lattice constants at 193 K: a = 2943.6(2); b = 2048.2(1); c = 1893.8(1) pm; R1 = 0.0428. 3 : Space group Cmc2₁, Z = 4, lattice dimensions at 193 K: a = 2881.6(2); b = 2990.2(2); c = 1883.7(2) pm; R1 = 0.0586. 4 ·1/2DME: Space group R&3macr;c, Z = 12, lattice dimensions at 193 K: a = b = 1583.5(1); c = 11755.3(5) pm; R1 = 0.0495. All complexes have heterocubane structures. In 1‐3 they are formed by four alkali metal atoms and by the nitrogen atoms of the (μ₃‐NPCy₃^‐) groups, whereas 4 forms a "heteroleptic" Li₄NO₃ heterocubane.     

3,6-Thioanhydro sugar derivatives. An enantiospecific synthesis of (2R,3R,4S)-3-benzyloxy-4-hydroxy-2-[(R)-1-benzyloxy-4-hydroxybutyl]thiolane as the key intermediate for thioswainsonine

Methyl 2-O-benzyl-3,6-thioanhydro-α-D-mannopyranoside ( 9 ) was obtained in eight steps from the commercially available methyl α-D-glucopyranoside. Compound 9 was transformed into (2R,3R,4S)-3-benzyloxy-4-hydroxy-2-[(R)-1-benzyloxy-4-hydroxybutyl]thiolane ( 14 ) by acid hydrolysis of its 2,4-di-O-benzyl derivative 10 followed by reaction of the not isolated 2,4-di-O-benzyl-3,6-thioanhydro-D-mannose ( 11 ) with ethoxycarbonylmethylenetriphenylphosphorane to give an = 1:1 E/Z mixture of the corresponding α,β-unsaturated ester ( 12 ). Finally, catalytic hydrogenation of 12 to ethyl (R)-4-benzyloxy-4-[(2′R)3′R,4′S)-3′-benzyloxy-4′-hydroxythiolan-2′-yl]butanoate ( 13 ) and subsequent reduction with lithium aluminum hydride gave the title compound 14 .