Effects of medium oil on electroresponsive characteristics of chitosan suspensions

Biocompatible chitosan particle suspensions in host oils of corn, soybean, and silicone were prepared and their electrorheological (ER) characteristics were examined under the imposition of electric fields. The effects of the weight concentration of particulate chitosan and the strength of the applied electric field on ER response in the various chitosan particle suspensions were investigated via measurements of rheological properties including flow curve, shear viscosity, and yield stress. The yield stresses of the three different chitosan–oil systems showed different values of slope in the electric field, but all data were found to fit well with our previously proposed universal scaling function.     

Correlation of the Dielectric Properties of Dispersed Particles with the Electrorheological Effect

The dc field rheological properties and frequency dependent dielectric properties of a set of electrorheological (ER) fluids composed of oxidized polyacrylonitrile or aluminosilicate materials dispersed in silicone oil were examined in this paper. Our experimental investigations show that there is a complicated relationship between the dielectric properties of dispersed particles and the ER effect. The dielectric loss of dispersed particles, which has not attracted much attention in previous work, was found to play a considerable role in ER response. The large dielectric loss tangent, experimentally around 0.10 at 1000 Hz, is found to be needed for a strong ER effect. A good ER solid material should first have large dielectric loss, and then the higher the dielectric constant, the stronger the ER effect. The large dielectric loss would facilitate the turning of dispersed particles, and the high dielectric constant would maintain the fibrillation structure stable and strong. Two processes, the particle turning process and the particle polarization process, are thought to be involved in ER activity. Our findings, in connection with the Wagner model, can better explain why the strongest ER effect occurs at particle conductivity of 10⁻⁷S/m; why the shear stress of some ER fluids decreases with frequency while with others the shear stress increases with frequency; and why trace water can enhance the ER effect considerably, which would help in understanding the mechanism of the ER effect. Too large a dielectric loss is thought to be unfavorable for the ER effect, and its suitable range is worth further study. The results also present a method of designing high performance ER fluids, which would significantly promote development of electrorheology and its application in industrial areas.     

Synthesis and electrorheological properties of oxalate group-modified amorphous titanium oxide nanoparticles

A kind of titanium oxide nanoparticles modified with varying amounts of oxalate group was prepared using a modified hydrolysis method. The microstructure, dielectric properties, and electrorheological (ER) performance were investigated. The results indicate that the oxalate group can effectively improve the dielectric properties and surface polarizability of the particles, and the ER performance of modified titanium oxide-based ER fluid is much higher than that of pure titanium oxide-based ER fluid. The shear stress of suitable oxalate group-modified amorphous titanium oxide-based ER fluid with a volume fraction of 30% reaches 47.5 kPa at E = 5 kV/mm, and the current density is less than 18 μAcm⁻². The yield stress can be up to 114 kPa at E = 5 kV/mm with a volume fraction of 40%.     

Electrorheology of aniline oligomers

Aniline oligomers were prepared by the oxidation of aniline with p-benzoquinone in aqueous solutions of methanesulfonic acid (MSA) of various concentrations. Their molecular structures were assessed by Fourier transform infrared spectroscopy. The electrorheological (ER) behavior of their silicone oil suspensions under applied electric field has been investigated. Shear stress at a low shear rate, τ _0.9, was used as a criterion of the rigidity of internal structures created by the application of an electric field. It was established from the fitting of the dielectric spectra of the suspensions with the Havriliak–Negami model that dielectric relaxation strength, as a degree of polarization induced by an external field contributing to the enhanced ER effect, increases and relaxation time, i.e., the response of the particle to the application of the field, decreases when a higher molar concentration of MSA is used. The best values were observed for suspensions of the sample prepared in the presence of 0.5 M of MSA. This suspension creates stiff internal structures under an applied electric field strength of 2 kV mm^?1 with τ _0.9 of nearly 50 Pa, which is even slightly of higher value than that obtained for standard polyaniline base ER suspension measured at the same conditions. The concentration of the MSA used in the preparation of oligomers seems to be a crucial factor influencing the conductivity, dielectric properties and, consequently, rheological behavior, and finally ER activity of their suspensions.     

Electrorheological Response and Structure Growth of Colloidal Silica Suspensions

The electrorheological response and structure growth of colloidal silica suspension was studied with in situ measurements of the shear stress, electric conductivity, and dielectric permittivity of the suspension. The measurements were carried out under steady and sweep shears after the application of an electric field of alternative current (100 Hz) using silica particles with a diameter of 630 nm and a water content of 4.5 wt%. The measurements of the conductivity enabled the detection of structure growth formed by particle aggregation and clarified that the development of the particle aggregation enlarged the dielectric permittivity and the shear stress. Hysteretic behavior observed in the electrorheological response was explained by considering structure growth of the particle aggregation. The correlation equation for the shear stress and the dielectric permittivity obtained in our previous work (1) was found to be applicable to the present results. Copyright 2001 Academic Press.     

Electrorheological properties of suspensions of hollow globular titanium oxide/polypyrrole particles

Hollow globular clusters of titanium oxide (TiO₂) nanoparticles were synthesized by a simple hydrothermal method. The prepared particles were consequently coated by in situ polymerization of conductive polymer polypyrrole (PPy) to obtain novel core–shell structured particles as a dispersed phase in electrorheological (ER) suspensions. The X-ray diffraction analysis and scanning electron microscopy provided information on particle composition and morphology. It appeared that PPy coating improved the compatibility of dispersed particles with silicone oil which results in higher sedimentation stability compared to that of mere TiO₂ particles-based ER suspension. The ER properties were investigated under both steady and oscillatory shears. It was found that TiO₂/PPy particles-based suspension showed higher ER activity than that of mere TiO₂ hollow globular clusters. These observations were elucidated well in view of their dielectric spectra analysis; a larger dielectric loss enhancement and faster interfacial polarization were responsible for a higher ER activity of core–shell structured TiO₂/PPy-based suspensions. Investigation of changes in ER properties of prepared suspensions as a function of particles concentration, viscosity of silicone oil used as a suspension medium, and electric field strength applied was also performed.     

Microwave dielectric properties of aqueous potassium iodide solutions as a function of temperature

The complex dielectric permittivity of aqueous KI solutions was studied for molalities of 0.50–4.01 m and temperatures of 288–323 K in the region of water dielectric permittivity dispersion. The values of high-frequency of dielectric permittivity (ε) and dielectric losses (ε″) were obtained at seven frequencies ranging between 7.5 and 25 GHz. The low-frequency electrical conductivity of the aforementioned solutions was measured for calculating ionic losses. A single relaxation process is observed in these solutions, fitted by the Debye or Cole-Cole equation with small distribution parameters. The static dielectric constant and dielectric relaxation time were studied as functions of temperature and concentration; the activation enthalpy of dielectric relaxation was calculated. The temperature dependence of the static dielectric constant was found to disappear in highly concentrated solutions. The structure-breaking effect on water caused by K⁺ and I⁻ ions was affirmed, this effect disappearing in going to elevated temperatures.     

Synthesis and electrorheology of camphorsulfonic acid doped polyaniline suspensions

 Semiconducting camphorsulfonic acid doped polyaniline (PANI–CSA) particles were synthesized by chemical oxidation polymerization, and their chemical structure and particle size were examined via Fourier transform IR spectroscopy and scanning electron microscopy, respectively. Electrorheological (ER) fluids were prepared by dispersing the PANI–CSA particles in silicone oil, and their steady-shear rheological properties under electric fields were investigated using a rotational rheometer with a high-voltage generator. The PANI–CSA synthesized in this study possesses typical ER behavior:shear stress increases with increasing electric field strengths. Received: 31 August 2000 Accepted: 6 April 2001     

Dielectric properties of sols of silver nanoparticles capped by alkyl carboxylate ligands

Sols of silver nanoparticles in toluene were studied by broadband dielectric spectroscopy (10⁻³–10⁵ Hz). The frequency dependences of the specific alternating current (ac) conductivity and the complex electric modulus were used to estimate the temperature/frequency intervals of long- and short-range charge transfer occurs, respectively. A considerable increase (by more than 30 °C) in the Vogel temperature T ₀ and the glass transition temperature T _g in sols compared with the pure solvent was found. It can be hypothesized that these cooperative effects reflect the initial stage of the superlattice formation. Although the dielectric characteristics of sols are generally controlled by the conductivity relaxation, the dielectric response was observed in the high-frequency range (1–10³ Hz) at low temperatures (from −50 to +10 °C). This response results from the presence of nanoparticles in solution. It is supposed that the relaxation is caused by the motion of ion impurities on the Ag nanoparticle surface within the carboxylate ligands shell. The dielectric properties of films strongly depend on both the characteristics of nanoparticles and the conditions of the film preparation. Like in sols, the direct current (dc) conductivity and the dielectric response of Ag nanoparticles in films are due to ion impurities.     

Direct Differentiation of the Types of Polarization Responsible for the Electrorheological Effect By a Dielectric Method

Debye polarization, ionic displacement polarization, and Maxwell-Wagner (interfacial) polarization are discussed in this paper, because they would most likely take place in an electrorheological (ER) suspension. The temperature dependences of the dielectric loss tangent maximums governed by these three types of polarization are theoretically found to be quite different. Given this fact, a method that can directly distinguish the polarization type and clarify which polarization would be mainly responsible for the ER effect is proposed. Two kinds of typical ER suspensions, heterogeneous particle type and homogeneous liquid crystalline polymer type, are studied using our method. It is found that Maxwell-Wagner polarization would be responsible for the ER effect both in a heterogeneous and in a homogeneous ER system. These findings present direct experimental evidence for the previous assumption that the Maxwell-Wagner polarization would dominate in the heterogeneous ER system and also shed light on the ER mechanism in a liquid crystalline polymer-type ER system. Copyright 2001 Academic Press.     

Synthesis and electrorheological behavior of sterically stabilized polypyrrole-silica-methylcellulose nanocomposite suspension

Various polypyrrole (PPy)-silica-methylcellulose nanocomposite particles were synthesized by suspension polymerization in the presence of silica nanoparticles controlling the ratio of pyrrole, silica, and methylcellulose during the polymerization. The electrorheological (ER) and dielectric properties of the sterically stabilized PPy-silica-methylcellulose nanocomposite suspensions were investigated. The ER response increases with the increase in the silica/pyrrole ratio. The ER behavior also depends on the methylcellulose amount during the polymerization. The yield stress initially increases with the methylcellulose amount, passes through a maximum, and then decreases with the methylcellulose amount. The dielectric constants and dc conductivities of the PPy-silica-methylcellulose nanocomposite particles and the dielectric properties of their suspensions indicate that the increased ER response arises from the enhanced interfacial and particle polarization which depends on the silica/pyrrole ratio and the methylcellulose amount during the polymerization.     

A dependence of electrical conductivity and some properties of paramagnetic centers on the doping level of poly(4-aminoazobenzene) with iodine

The dependences of the electrical conductivity, ESR spectral linewidths, spin concentrations, and g-factor on the level of iodine doping of poly(4-aminoazobenzene), synthesized by the oxidative polymerization of 4-aminoazobenzene with iodine, were studied for the first time. The polymers were studied by ESR and UV spectroscopy. With an increase in the level of iodine doping, the electrical conductivity of the polymers increases from 3·10⁻¹⁰ to 4·10⁻¹ S m⁻¹, the ESR linewidth increases from 0.96 to 1.94 mT, and the g-factor increases from 2.004 to 2.007. The spin concentration changes ambiguously, depending on the doping level. In the iodine-doped polymers, spins are mainly localized on two nitrogen atoms of the azo groups.     

Conductivity of flowing polyaniline suspensions in electric field

The formation of chain structures by polarized polyaniline (PANI) particles suspended in silicone oil in the electric field has been monitored by recording suspension conductivity in the course of time. For that purpose, three types of PANI particles differing in the conductivity (3.1 × 10⁻³, 1.7 × 10⁻¹, and 2.0 × 10⁻¹ S cm⁻¹) have been chosen out of a series of nine samples prepared by controlled protonation of PANI base in orthophosphoric acid solutions. Relaxation times reflecting this process and characterizing the rate of the response to the electric field decreased with particle conductivity, indicating a higher polarizability of particles. At the same time, the maximum conductivity of suspension increased as a consequence of the electric and shear forces acting on the particles. In the shear fields, shorter relaxation times appeared than at rest. The simultaneous measurement of the shear stress confirmed that the conductivity investigation can reliably characterize the development of electrorheological structures.     

Synthesis and electrorheological characterization of emulsion polymerized SAN‐clay nanocomposite suspensions

Styrene‐acrylonitrile (SAN) copolymer‐clay nanocomposite was synthesized by emulsion polymerization, which is the easiest method of intercalation (e.g., melt or solution intercalation). Existence of the intercalated polymer was verified by Fourier transform‐infrared spectroscopy and X‐ray diffraction (XRD) analysis. From XRD, we confirmed the insertion of styrene‐acrylonitrile copolymer between the interlayers of clay, whose separation consequently becomes larger than that of the polymer‐free clay. Thermogravimetric analysis showed that the thermal stability of the organic polymers was sustained. Using electrorheological (ER) fluids composed of intercalated particles and silicone oil, we observed typical ER behavior, such as higher shear stress in the presence of an electric field and increasing yield stress with particle concentration. We further observed the critical shear rate at which the ER fluids exhibit pseudo‐Newtonian behavior.     

Effect of temperature and dopant concentration on the conductivity of samaria-doped ceria electrolyte

The conductivity, σ, of a samaria-doped ceria electrolyte is studied as a function of temperature and dopant concentration, x, which was from 5 to 30 mol%. It is shown that a maximum in σ versus x corresponds to a minimum in activation energy. It is found that the conductivity is completely due to oxygen vacancy conduction. The conductivity increases with increasing samaria doping and reaches a maximum for (CeO₂)_0.8(SmO_1.5)_0.2, which has a conductivity of 5.6×10^–1 S/cm at 800 °C. A curvature at T=T _c, the critical temperature, has been observed in the Arrhenius plot. This phenomenon may be explained by a model which proposed that, below T _c, nucleation of mobile oxygen vacancies into ordered clusters occurs, and, above T _c, all oxygen vacancies appear to be mobile without interaction with dopant cation. In addition, the composition dependences of both the critical temperature and the trapping energy are consistent with that of the activation energy. Electronic Publication     

压力驱动膜过程中浓差极化的介电模型

提出了电导率呈指数型分布的浓差极化层的介电模型. 利用传递方程研究了压力驱动膜过程的介电谱, 并导出层内电导率分布与宏观测量的电容和电导之间定量关系的理论表达式, 得到介电谱高低频特征值与浓差极化模数之间的关系. 计算结果表明, 较之线性分布电导率, 指数型分布电导率能更好地描述浓差极化层的介电谱. 研究表明, 介电谱及其特征值和弛豫强度随浓差极化模数和层厚度显著变化. 对由分离膜、主体溶液和浓差极化层组成的复合体系的介电谱进行了数值模拟, 发现电导较之电容其频率依存关系对浓差极化模数的变化更为敏感, 上述研究为利用介电谱在线监测膜分离过程提供了有价值的理论参考.     

Electrorheological properties of polyaniline suspensions: field-induced liquid to solid transition and residual gel structure

Polyaniline (PANI) was synthesized via oxidative coupling polymerization in acid conditions and de-doped in solution of ammonia. The electrorheological (ER) properties of the PANI/silicone oil suspensions were investigated in oscillatory shear as functions of electric field strength, particle concentration, and host fluid viscosity. Consistent with literature, the PANI ER fluid exhibits viscoelastic behavior under the applied electric field and the ER response is strongly enhanced with increasing electric field strength and particle concentration. The dynamic moduli, G' and G' increase dramatically, by 5 orders of magnitude, as the electric field strength is increased to 2 kV/mm. A viscoelastic liquid to solid transition occurs at a critical electric field strength, in the range Ec = 50-200 V/mm, whose value depends on particle concentration and host fluid viscosity. The fibrillar structure formed in the presence of the applied field has a static yield strength tau(y), whose value scales with electric field strength as tau(y) approximately E(1.88). When the field is switched off a residual structure remains, whose yield stress increases with the strength of the applied field and particle concentration. When the applied stress exceeds the yield stress of the residual structure, fast, fully reversible switching of the ER response is obtained.     

Domain reorientation dynamics of sol–gel derived strontium doped PLZT (8/65/35)

Polycrystalline samples of PLSZT with the composition Pb_0.92−x La_0.08Sr _x (Zr_0.65Ti_0.35)O₃ (where x = 0, 0.02, 0.04, 0.06, 0.08, and 0.10) have been synthesized by sol–gel technique. DTA analysis confirms that all the organic constituents get decomposed and final PLZT is formed at 545 °C. The XRD analysis suggests the formation of single rhombohedral perovskite phase with decreasing unit cell parameter. Crystallite size calculated, using Scherrer’s equation, was found to decrease with Sr doping due to smaller ionic radii of Sr than Pb. Compact uniform grain distribution was observed from SEM micrographs. The ferroelectric to paraelectric phase transition temperature, maximum dielectric constant and remanent polarization (P _r) were found to decrease with Sr doping along with increasing diffuse nature of phase transformation. Detailed domain reorientation dynamics study suggests that Sr doping increases the percentage backswitching and decreases the normalized coercivity by decreasing the viscous nature of composition.     

Electrorheological characterization of polyaniline-coated poly(methyl methacrylate) suspensions

Surface-conductive particles consisting of a poly(methyl methacrylate) (PMMA) core and a polyaniline (PA)-coated shell were synthesized and adopted as suspended particles for electrorheological (ER) fluids. The PA-PMMA composite particles synthesized were monodisperse and spherical in shape. The PA-PMMA suspensions in silicone oil showed typical ER characteristics under an applied electric field. The PA-PMMA composite particles possess a higher dielectric constant and conductivity than the pure PA particle, within an acceptable conductivity range for ER fluids, but the PA-based ER fluid showed larger shear-stress enhancement than the PA-PMMA-based systems. This phenomena can be explained by the interfacial polarizability of PA-based ER fluids, which is the difference between the ER fluid's dielectric constant and loss factor - this polarizability was higher than that of PA-PMMA-based ER fluids, as shown by the dielectric spectrum of each fluid. The insulating PMMA core suppressed the interfacial polarization in ER fluids, resulting in reduced interaction among particles under an imposed electric field.     

Dilectric and thermal properties of PEO doped with cadimium chloride salt

The main aim of this research is to investigate the effect of salt concentration on the dielectric properties(AC (σ_AC),permittivity（ε′）,dielectric loss（ε″）,and dielectric relaxation process) and melting behavior of polyethylene oxide （PEO）/CdCl₂ complexes.The dielectric study was carried out over a frequency range 10-335 kHz and a temperature range 25-45℃.The AC conductivity,permittivity and dielectric loss of the PEO/CdCl₂ complexes increase with increasing salt concentration and temperature.Also,it was found that the addition of CdCl₂ salt to PEO host reduced the melting temperature of PEO host.Dielectric results reveal that the relaxation process of these complexes is due to viscoelastic relaxation or non-Debye relaxation at room temperature.Additionally,it was found that relaxation behavior remained viscoelastic at different temperatures and salt concentrations.