Voltammetric Behavior of MoS$\rm{ {_{4}^{2-}}}$ and SbS$\rm{ {_{4}^{3-}}}$ as Possible Components of “Dissolved Sulfide” in Oxic Natural Waters

Nanomolar concentrations of dissolved sulfide have been observed in O₂‐ bearing natural waters. The sulfide consists of oxidation‐resistant, unknown chemical components that might include metal‐sulfide complexes, elemental sulfur in various forms or organic sulfur compounds. Here we show that thioanions are also plausible components. Tetrathiomolybdate and tetrathioantimonate ions deposit respectively 3 and 4 equivalents of HgS at mercury electrodes. In cathodic stripping voltammetry, a common method to quantify nanomolar sulfide in nature, MoS and SbS would therefore contribute to “total dissolved sulfide.” Limited evidence suggests that thioanions may be powerful complexing agents that would be capable of affecting trace metal speciation and bioavailability in natural waters.     

Electrogenerated Chemiluminescence of Tris(2,2′‐bipyridyl)ruthenium(II) Immobilized in Humic Acid‐Silica‐Poly(vinyl alcohol) Composite Films

In this paper, we report the first attempt to use humic acid (HA) as modifiers to prepare the organic‐inorganic hybrid modified glassy carbon electrodes based on HA‐silica‐PVA (poly(vinyl alcohol)) sol‐gel composite. Electroactive species of tris(2,2′‐bipyridyl)ruthenium(II) (Ru(bpy) ) can easily incorporate into the HA‐silica‐PVA films to form Ru(bpy) modified electrodes. The amount of Ru(bpy) incorporated in the composite films strongly depends on the amount of HA in the hybrid sol. Electrochemical and electrogenerated chemiluminescence (ECL) of Ru(bpy) immobilized in HA‐silica composite films coated on a glassy carbon electrode have been studied with tripropylamine (TPA) as the coreactant. The analytical performance of this modified electrode was evaluated in a flow injection analysis (FIA) system with a homemade flow cell. The as‐prepared electrode showed good stability and high sensitivity. The detection limits (S/N=3) were 0.050 μmol L^?1 for TPA and 0.20 μmol L^?1 for oxalate, and the linear ranges were from 0.10 μmol L^?1 to 1.0 mmol L^?1 for TPA and from 1.0 μmol L^?1 to 1.0 mmol L^?1 for oxalate, respectively. The resulting electrodes were stable over two months.     

Characterization and Electrocatalytic Properties of Composite Poly(new fuchsin) and Phosphomolybdate Films

Organic/inorganic hybrid films of poly(new fuchsin) and phosphomolybdate (PMo₁₂O ) have been prepared in acidic aqueous solutions. These new combination films are stable, electrochemically active, and can be produced on glassy carbon, platinum, gold, and transparent semiconductor tin oxide electrodes. An electrochemical quartz crystal microbalance along with cyclic voltammetry and UV‐visible absorption spectroscopy were used to study the in situ growth of the hybrid films. The hybrid poly(new fuchsin) and PMo₁₂O films showed four obvious redox couples, and when transferred to various acidic aqueous solutions, the formal potentials of the four redox couples were found to be pH dependent. The electrocatalytic reduction of ClO , BrO , IO , SO , S₂O , H₂O₂, and NO by the hybrid poly(new fuchsin) and PMo₁₂O films was achieved in acidic aqueous solutions. In an aqueous solution at pH 1.5, a hybrid poly(new fuchsin) and PMo₁₂O film showed a higher electrocatalytic reduction activity of IO than BrO or ClO , and the order of electrocatalytic activity was IO >BrO >ClO . The order of electrocatalytic reduction of SO , S₂O , H₂O₂, and NO by hybrid poly(new fuchsin) and PMo₁₂O films in an aqueous solution at pH 1.5 was NO >H₂O₂>S₂O and SO . The electrocatalytic reactions of the poly(new fuchsin) and PMo₁₂O films were investigated using the rotating ring‐disk electrode method.     

Electrochemiluminescent Determination of Chlorphenamine Maleate Based on Ru(bpy)$\rm{ {_{3}^{2+}}}$ Immobilized in a Nano‐Titania/Nafion Membrane

The immobilization of tris(2,2'‐bipyridyl)ruthenium(II) [Ru(bpy) ] in a TiO₂/Nafion nanocomposites membrane modified glassy carbon electrode (GCE) was achieved via both an ion‐exchange process and hydrophobic interactions .The surface‐confined Ru(bpy) shows good electrochemical and photochemical activities. The Ru(bpy) underwent reversible surface process and reacted with chlorphenamine maleate (CPM) to produce electrochemiluminescence. The modified electrode was used for the ECL determination of CPM. It showed good linearity in the concentration range from 2×10^?8 g/mL to 1×10^?6 g/mL (R=0.9995) with a detection 6×10^?9 g/mL (S/N=3). The relative standard derivation (n=11) was 2%. This method is developed for the determination of CPM with simplicity and high sensitivity.     

Enhanced Electrogenerated Chemiluminescence of Tris(2,2′‐bipyridyl) Ruthenium(II)/tripropylamine in the Presence of Pyridine and Its Analogues

In the present work, we conducted an investigation on the electrochemical and ECL behavior of Ru(bpy) /TPrA system in the presence of pyridine and its analogues on platinum and gold electrode. Results showed that pyridine and its analogues enhanced Ru(bpy) /TPrA ECL signal and exhibited different enhancement effects on different electrodes. On platinum electrode, the maximum enhancement factor of about 5 was obtained. On gold electrode, a low‐oxidation‐potential (LOP) ECL signal occurred and increased.     

Electrochemical Study of PW12O$\rm{_{40}^{3-}}$ in Poly(ethylene glycol) Electrolyte

The electrochemical properties of PW₁₂O (abbreviated as PW₁₂) anion in poly(ethylene glycol) (PEG) have been studied by cyclic voltammetry, complex impedance and FT‐IR spectroscopy. The PW₁₂ anion in PEG‐LiClO₄ electrolyte shows reasonable facile electrochemistry, and the diffusion coefficients of PW₁₂ were measured with microelectrode. It is shown that ionic conductivity of polymer electrolytes based on low molecular weight PEG can be improved by the addition of PW₁₂. The increase of conductivity is coupled with decrease of transient cross‐links density of polymer chains which is evidenced by the downshift of C? O? C stretching mode. The phenomena are explained in view of ion‐ion and ion‐polymer interactions.     

Tris(2,2′‐bipyridyl)ruthenium(II) Electrogenerated Chemiluminescence Sensor Based on Sol–Gel‐Derived V2O5/Nafion Composite Films

Mesoporous V₂O₅/Nafion composite films have been used for the immobilization of tris(2,2′‐bipyridyl)ruthenium (II) (Ru(bpy) ) on an electrode surface to yield a solid‐state electrogenerated chemiluminescence (ECL) sensor. The electrochemical and ECL behavior of Ru(bpy) ion‐exchanged into the composite films has been characterized as a function of the amount of Nafion incorporated into the V₂O₅/Nafion composite. The composite film with 80% Nafion content has the largest pore diameter (4.19 nm) and yields the maximum ECL response for tripropylamine (TPA) because of the fast diffusion of analyte into the film with large pores. Due to the enlarged pore size and enhanced conductivity of the V₂O₅/Nafion composite, the present ECL sensor based on the composite films exhibited around 2 orders of magnitude higher ECL response and one order of magnitude lower detection limit for TPA (10 nM) compared to those obtained with the ECL sensors based on other types of sol–gel ceramic/Nafion composite films such as SiO₂/Nafion and TiO₂/Nafion.     

Electrogenerated Chemiluminescence Determination of Dopamine and Epinephrine in the Presence of Ascorbic Acid at Carbon Nanotube/Nafion‐Ru(bpy)$\rm{ {_{3}^{2+}}}$ Composite Film Modified Glassy Carbon Electrode

Based on the inhibition effect of dopamine and epinephrine on Ru(bpy) ‐tripropylamine electrogenerated chemiluminescence system, the excellent properties of carbon nanotube, and the cation permselectivity of Nafion film, an electrogenerated chemiluminescence inhibition method for determination of dopamine and epinephrine in the presence of ascorbic acid at carbon nanotube/Nafion‐Ru(bpy) composite film modified glassy carbon electrode was described. The results showed that the proposed method was sensitive and selective for the determination of dopamine and epinephine. The linear calibration range was from 1.6×10^?9 M to 3.2×10^?5 M and 5×10^?8 M to 6×10^?5 M for dopamine and epinephrine, respectively. 200‐fold excess of ascorbic acid did not interfere with the determination of 1 μM dopamine and epinephrine.     

The Interaction of Iodide Film with Platinum Microparticles on Different Electrode Materials for Various Electrocatalytic Reactions

The electrochemical depositions of Pt microparticles and KI film were successfully carried out on glassy carbon electrodes (GCE), gold electrodes (GE), and indium tin oxide electrodes (ITO). The electrochemical studies of Pt micro/KI film on GCE show that the film was stable, active at pH 1.5 electrolyte solutions. The Pt microparticle/KI film modified ITO electrodes were examined by using scanning electron microscopy (SEM) and atomic force microscopy (AFM) techniques. The SEM and AFM results show that the Pt particle sizes were in the range of 120 nm–1.4 μm, respectively. The proposed film on GCE shows efficient electrocatalysis for oxygen, Cr₂O reduction by using cyclic voltammetry. Further the electrochemical oxidation of sodium meta‐arsenite (As(III)), H₂O₂ were successfully carried out and the detection of H₂O₂ in real samples has been validated.     

Switchover of the Mechanism between Electron Transfer and Hydrogen‐Atom Transfer for a Protonated Manganese(IV)–Oxo Complex by Changing Only the Reaction Temperature

Hydroxylation of mesitylene by a nonheme manganese(IV)–oxo complex, [(N4Py)Mn^IV(O)]²⁺ ( 1 ), proceeds via one‐step hydrogen‐atom transfer (HAT) with a large deuterium kinetic isotope effect (KIE) of 3.2(3) at 293 K. In contrast, the same reaction with a triflic acid‐bound manganese(IV)‐oxo complex, [(N4Py)Mn^IV(O)]²⁺‐(HOTf)₂ ( 2 ), proceeds via electron transfer (ET) with no KIE at 293 K. Interestingly, when the reaction temperature is lowered to less than 263 K in the reaction of 2 , however, the mechanism changes again from ET to HAT with a large KIE of 2.9(3). Such a switchover of the reaction mechanism from ET to HAT is shown to occur by changing only temperature in the boundary region between ET and HAT pathways when the driving force of ET from toluene derivatives to 2 is around ?0.5 eV. The present results provide a valuable and general guide to predict a switchover of the reaction mechanism from ET to the others, including HAT.     

Determination of Estrogens by High Performance Liquid Chromatography with Pre-Label Derivatization with 2-(4-Carboxy)-5,6-Dimethylbenzimidazole (II): Shortening of Analysis Time and Application to Monitoring Estrogen in Serum From In-Vitro Fertilization Embryo Transfer (IVF-ET) Patients

Abstract

We report a sensitive high performance liquid chromatography (HPLC) method for determination of free and conjugated estrogens (estrone, estradiol and estriol) by a fluorescent pre-labeling regent, 2-(4-carboxyphenyl)-5,6-dimethylbenzimidazole, with modification of previous work. The modified method was also tried, in preliminary work, for diagnosis of the in-vitro fertilization embryo transfer (IVF-ET) process. The reagent volumes were changed to one-tenth, derivatization conditions were changed to mild conditions at 40 C, and a solid-phase extraction process by SEP-PAK could be omitted after restudy of reaction conditions. As a result analysis time could be shorted within 40 min. The proposed HPLC method was applied to monitoring of free and conjugated estrogens in the patients who attend in-vitro fertilization embryo transfer (IVF-ET). The subsequent increase of free and conjugated estrone, estradiol and estriol was observed with the progress of follicle growth following ovulation stage in the IVF-ET process. We tried to plot estrogens for assist of clinical diagnosis of IVF-ET. The free estrone: 200-600 pg/ml, estradiol: 200-600 pg/ml and estriol: 100-300 pg/ml, conjugate estrone: 1000-5000 pg/ml, estradiol: 3000-8000 pg/ml and estriol: 2000-7000 pg/ml) in the patients without hormone disease were observed before human chorionic gonadotropin stimulation (hCG) on IVF-ET process. It was expected that free estrogen values, especially E1 and E3 could be use as validation products for diagnosis of hormone disease in IVF-ET process.     

Electrochemical synthesis of Co,Ni, and Zn complexes with 2-Pyrrole-[N-(o-hydroxyphenyl)methylimines]: The crystal structure of 2,2′-Bipyridine bis{2-[(2-pyrrole)methylimino]5-methylphenolato}nickel(II)

The electrochemical oxidation of anodic cobalt, nickel, and zinc in acetonitrile containing both 2-pyrrole-[N-(o-hydroxyphenyl)methylimines] (H₂L) and a bidentate ligand (1, 10-phenanthroline(phen) or 2,2′-bipyridine(bipy)) yielded compounds of general formula M(HL)₂ · phen and M(HL)₂ · bipy (M = Co, Ni, Zn). The crystal structure of 2,2′-bipyridine bis{2-[(2-pyrrole)methylimino]5-methylphenolato}nickel(II) was determined by X-ray diffraction. This compound crystallizes in the orthorhombic space group Pccn with a = 19.430(2), b = 28.488(2), c = 17.567(1) Å. The nickel atom has a distorted octahedral geometry, and the pyrrole nitrogen is not coordinated. The IR, ¹H-NMR and UV-visible spectra of the complexes are discussed and related to the structure.     

Cu(II) immobilized on Fe3O4–diethylenetriamine: A new magnetically recoverable catalyst for the synthesis of 2,3‐dihydroquinazolin‐4(1H)‐ones and oxidative coupling of thiols

Cu(II) immobilized on Fe₃O₄–diethylenetriamine was designed as a new, inexpensive and efficient heterogeneous catalyst for the synthesis of 2,3‐dihydroquinazolin‐4(1H )‐ones and the oxidative coupling of thiols. The structure of the nanomagnetic catalyst was comprehensively characterized using Fourier transform infrared spectroscopy, scanning electron microscopy, energy‐dispersive X‐ray spectroscopy, vibrating sample magnetometry, thermogravimetric analysis, X‐ray diffraction and atomic absorption spectroscopy. Simple preparation of the catalyst from commercially available materials, high catalytic activity, simple operation, high yields, use of green solvents, easy magnetic separation and reusability of the catalyst with unaltered activity make our protocol a green and feasible synthetic strategy.     

Cold Deposition as a Novel Procedure for the Preparation of Titania Sol‐Gel: A Development of a High Sensitive Electrochemical Method for Determination of Cu(II) in the Presence of Arsenic(III)

Titania sol‐gel modified gold electrode (TSGMGE) was prepared with the usage of a new proposed cold deposition method at ?10 °C. Scanning electron microscope (SEM) operating at 30 kV was used to obtain micrographs of unmodified and modified electrodes. The obtained results showed that this procedure yields a sol‐gel with high porosity in comparison to conventional methods. The modified Au electrode was fabricated by trapping the L‐glutamine in titania sol‐gel at low temperatures to preparation of a new titania sol‐gel glutamine modified gold electrode (TSGGMGE). The possibility determination of traces of Cu(II) in the presence of As(III) was investigated using proposed electrode. Under the optimized conditions, copper was accumulated at ?0.35 V (vs. Ag/AgCl) for 40 s in 0.1 M acetate buffer (pH 4.0) in the presence of different amounts of arsenic. Two dynamic linear responses with good reproducibility were observed for copper ions in the concentration range of 1 × 10^?6 ?4 × 10^?4 M and 4 × 10^?8 ?6 × 10^?7 M.