A molecularly imprinted photonic polymer sensor with high selectivity for tetracyclines analysis in food

A molecularly imprinted photonic polymer (MIPP) sensor for respective detection of tetracycline, oxytetracycline and chlortetracycline is developed based on the combination of a colloidal crystal templating method and a molecular imprinting technique. Colloidal crystal templates are prepared from monodisperse polystyrene colloids. The molecularly imprinted polymer, which is embodied in the colloidal crystal templates, is synthesized with acrylic acid and acrylamide as monomers, N,N'-methylene bisacrylamide as a cross-linker and tetracyclines (TCs) as imprinting template molecules. After removal of the colloidal crystal template and the molecularly imprinted template, the resulted MIPP consists of a three-dimensional, highly ordered and interconnected macroporous array with a thin hydrogel wall, where nanocavities complementary to analytes in shape and binding sites are distributed. The response of MIPP to TCs stimulants in aqueous solution is detected through a readable Bragg diffraction red-shift, which is due to the lattice change of MIPP structures responding to their rebinding to the target TCs molecules. A linear relationship was found between the Δλ and the concentration of TCs in the range from 0.04 μM to 0.24 μM. With this sensory system, direct and selective detection of TCs has been achieved without using label techniques and expensive instruments. The developed method has been applied successfully to detect tetracycline in milk and honey samples.     

A sensitive electrochemical sensor modified with multi‐walled carbon nanotubes doped molecularly imprinted silica nanospheres for detecting chlorpyrifos

A highly sensitive and convenient electrochemical sensor, based on surface molecularly imprinted polymers and multiwalled carbon nanotubes, was successfully developed to detect chlorpyrifos in real samples. In order to solve the problems like uneven shapes, poor size accessibility, and low imprinting capacity, the layer of the molecularly imprinted polymer was prepared on the surface of silica nanospheres. Moreover, the doping of multiwalled carbon nanotubes greatly improved the electrical properties of developed sensor. Under the optimal conductions, the electrochemical response of the sensor is linearly proportional to the concentration of chlorpyrifos in the range of 5.0 × 10^?12‐5.0 × 10^?8 mol/L with a low detection limit of 8.1 × 10^?13 mol/L. The prepared sensor exhibited multiple advantages such as low cost, simple preparation, convenient use, excellent selectivity, and good reproducibility. Finally, the prepared sensor was successfully used to detect chlorpyrifos in vegetable and fruit.     

Electrochemical Detection of Vascular Endothelial Growth Factor by Molecularly Imprinted Polymer

In this study, we report the development of a sensitive label‐free impedimetric sensor based on molecularly imprinted polymer (MIP) as biomimetic receptor coupled with screen‐printed electrodes (SPEs) for the detection of vascular endothelial growth factor (VEGF). Firstly, electropolymerization of o‐phenylenediamine (o‐PD) in the presence of VEGF molecule by cyclic voltammetry was performed onto graphite screen‐printed electrodes. The solvent extraction of the target was then carried out. The MIP based sensor was characterized by electrochemical techniques and scanning electron microscopy (SEM). Using optimized experimental conditions, the single‐use MIP‐based sensor showed a good analytical performance for VEGF detection from 20 to 200 pg mL^?1 with limit of detection of 0.08 pg mL^?1. Finally, the developed MIP‐based sensor in human serum samples was also tested.     

Molecularly imprinted photonic polymer as an optical sensor to detect chloramphenicol

An inverse opal photonic crystal sensor that could specifically detect chloramphenicol (CAP) in a label-free way was introduced in the current research. A colloidal crystal template was first prepared from monodisperse SiO(2) nanospheres. Precursors with different compositions were infused into the void spaces of the respective templates and aggregated. The template and the imprinted CAP were removed, and a molecularly imprinted photonic polymer (MIPP) with numerous nanocavities derived from the SiO(2) template was prepared. The MIPP could specifically recognize the target CAP. The results showed that the embedding and transporting of CAP could change the reflection peak intensity of the MIPP. The MIPP exhibited good responsiveness, with a detection range from 1 ng mL(-1) to 1 μg mL(-1) of CAP. The MIPP response time was 8 min upon its addition to CAP at a concentration of 10 ng mL(-1), which is shorter than that of other methods. After repeated use, the MIPP maintained a good performance and detection capacity. Thus, the results prove that the novel sensor could specifically detect CAP in a simple, time-saving, and low-cost manner.     

Selective,sensitive, and fast determination of S-layer proteins by a molecularly imprinted photonic polymer coated film and a fiber-optic spectrometer

A newly developed molecularly imprinted photonic polymer (MIPP) film, which was prepared by colloidal crystal templating and surface molecular imprinting, was used for selective capture of S-layer protein (SLP) from a complex Lactobacillus acidophilus sample. The colloidal crystal templates were formed by a dipping process followed by chemical binding of the imprinted template SLP molecules. A sandwich structure consisting of two glass slides was formed after the SLP–silica layer had been covered with a poly(methyl methacrylate) glass slide. After polymerization of the SLP–silica layer with the preprepared polymerization solution, hydrofluoric acid and acetic phosphate buffer solutions removed the silica particles and SLP molecules, respectively. The MIPP film obtained exhibited a three-dimensional, highly ordered and interconnected macroporous structure (pore size greater than 200 nm), which is specifically accessible to SLP molecules. The adsorbed SLP molecules were simply and straightforwardly detected by a fiber-optic spectrometer. The redshift of the Bragg diffraction peak of the MIPP film was linearly related to the number of SLP molecules that had been harvested in the film. The detection limit of the SLP–MMIP–fiber-optic spectrometer method for SLP was 1 ng mL^-1. The MIPP sensor was successfully applied to detect SLP molecules in a crudely extracted Lactobacillus acidophilus sample. Our results prove the applicability of the SLP–MIPP film for fast and real-time measurement of SLP.

Graphical abstract

     

HPLC determination of domoic acid in shellfish based on magnetic molecularly imprinting polymers

A magnetic molecularly imprinting polymer for domoic acid was fabricated. Synthesis conditions were optimized. The polymer particles have high magnetization for rapid magnetic separation. The apparent maximum absorption amount and dissociation constant of the polymer were 1,600?µg?g^?1 and 20.6?µg?mL^?1, respectively. The polymer retained 90% of adsorption amount after 5 times of repeated use. It was used as an adsorbent for purification and HPLC detection of domoic acid in shellfish with a detection limit of 0.050?µg?g^?1. Thus, the polymer could be applied to the sample pretreatment of aquatic products.     

Highly Selective Molecularly Imprinted Polymer Sensor for Indium Detection Based on Recognition of In‐Alizarin Complexes

A highly selective molecularly imprinted polymer electrochemical sensor for In³⁺ detection was proposed. In³⁺ ion was chelated with alizarin red S to form a complex In‐ARS. The complex was used as the template molecule to prepare a molecularly imprinted polymer (MIP) based sensor. The selectivity of the sensor was improved significantly due to the three‐dimensional specific structure of the complex, and the selective complexation of ligands for metal ions. Moreover, the sensitivity of the proposed sensor was improved by recording the reductive current of ligand in complex. This technique was highly sensitive for quantitative analysis of In³⁺ in the concentrations ranged from 1×10^?8 mol/L to 2.5×10^?7 mol/L with a detection limit of 4.7×10^?9 mol/L. The proposed sensor has been successfully used in detecting In³⁺ in real samples.     

Synthesis of a molecularly imprinted polymer on mSiO2@Fe3O4 for the selective adsorption of atrazine

Atrazine contamination of water is of considerable concern because of the potential hazard to human health. In this study, a magnetic molecularly imprinted polymer for atrazine was prepared by the surface‐imprinting technique using Fe₃O₄ as the core, mesoporous silica as the carrier, atrazine as the template, and itaconic acid as the functional monomer. The magnetic molecularly imprinted polymer was characterized by Fourier‐transform infrared spectroscopy, scanning electron microscopy, X‐ray diffraction, and vibration‐sample magnetometry. The binding properties of the magnetic molecularly imprinted polymer toward atrazine were investigated by adsorption isotherms, kinetics, and competitive adsorption. It was found that the adsorption equilibrium was achieved within 2 h, the maximum adsorption capacity of atrazine was 8.8 μmol/g, and the adsorption process could be well described by the Langmuir isotherm model and pseudo‐second‐order kinetic model. The magnetic molecularly imprinted polymer exhibited good adsorption selectivity for atrazine with respect to structural analogues, such as cyanazine, simetryne, and prometryn. The reusability of the magnetic molecularly imprinted polymer was demonstrated for at least five repeated cycles without a significant decrease in adsorption capacity. These results suggested that the magnetic molecularly imprinted polymer could be used as an efficient material for the selective adsorption and removal of atrazine from water samples.     

Encapsulating Sulfur into Hierarchically Ordered Porous Carbon as a High‐Performance Cathode for Lithium–Sulfur Batteries

A three‐dimensional (3D) hierarchical carbon–sulfur nanocomposite that is useful as a high‐performance cathode for rechargeable lithium–sulfur batteries is reported. The 3D hierarchically ordered porous carbon (HOPC) with mesoporous walls and interconnected macropores was prepared by in situ self‐assembly of colloidal polymer and silica spheres with sucrose as the carbon source. The obtained porous carbon possesses a large specific surface area and pore volume with narrow mesopore size distribution, and acts as a host and conducting framework to contain highly dispersed elemental sulfur. Electrochemical tests reveal that the HOPC/S nanocomposite with well‐defined nanostructure delivers a high initial specific capacity up to 1193 mAh g^?1 and a stable capacity of 884 mAh g^?1 after 50 cycles at 0.1 C. In addition, the HOPC/S nanocomposite exhibits high reversible capacity at high rates. The excellent electrochemical performance is attributed exclusively to the beneficial integration of the mesopores for the electrochemical reaction and macropores for ion transport. The mesoporous walls of the HOPC act as solvent‐restricted reactors for the redox reaction of sulfur and aid in suppressing the diffusion of polysulfide species into the electrolyte. The “open” ordered interconnected macropores and windows facilitate transportation of electrolyte and solvated lithium ions during the charge/discharge process. These results show that nanostructured carbon with hierarchical pore distribution could be a promising scaffold for encapsulating sulfur to approach high specific capacity and energy density with long cycling performance.     

In Situ Generation of AgI Quantum Dots by the Confinement of A Supramolecular Polymer Network: A Novel Approach for Ultrasensitive Response

A novel approach for in situ generation of AgI quantum dots by the confinement of a pillar[5]arene‐based supramolecular polymer network has been successfully developed. The supramolecular polymer network ( SPN‐QP ) was constructed by using a bis‐8‐hydroxyquinoline‐modified pillar[5]arene derivative as a host ( H‐QP ) and a bis‐pyridinium‐modified decane as guest ( G‐PD ). The SPN‐QP shows ultrasensitive response for Ag⁺. The limit of detection is about 7.44×10^?9 M.^.Interestingly, when I^? was added to the SPN‐QP +Ag⁺ system, an unexpected strong warm‐white fluorescence emission was observed. After carefu investigation, we found that the strong warm‐white fluorescence emission could be attributed to the in situ formation of AgI quantum dots under the confinement of the supramolecular polymer network ( SPN‐QP ). Based on this approach, ultrasensitive detection of I^? was realized. The limit of detection for I^? is 4.40×10^?9 M. This study provides a new way for the preparation of quantum dots under the confinement of supramolecular polymer network as well as ultrasensitive detection of ions by in situ formation of quantum dots.     

Molecularly imprinted polymers bearing spiropyran‐based photoresponsive binding sites capable of photo‐triggered switching for molecular recognition activity

Photoresponsive molecularly imprinted nanocavities were prepared using a newly designed functional monomer bearing a photoresponsive spiropyran moiety with a carboxy group that can interact with atrazine (the template molecule), in which the spiropyran moiety was incorporated into the binding cavities. Spectrophotometric analysis confirmed that the spiropyran moiety was photoresponsive even after polymerization. The selectivity of the EDMA‐based molecularly imprinted polymer (MIP_EDMA) was tested to examine the binding behavior of atrazine and other agrochemicals, revealing that the atrazine‐imprinted polymer can bind selectively to triazine herbicides. Photo‐triggered switching of the binding activity in MIP_EDMA was investigated, and the binding activity was found to decrease dramatically after UV light irradiation, suggesting that the spiropyran moiety in the binding cavities was transformed to the merocyanine form, resulting in unfavorable translocation of the carboxy group for atrazine binding. Consequently, the spiropyran‐based MIP_EDMA demonstrated in this study could open a way to realizing reliable photoresponsive smart materials. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1637–1644     

Preparation of l‐phenylalanine‐imprinted solid‐phase extraction sorbent by Pickering emulsion polymerization and the selective enrichment of l‐phenylalanine from human urine

A novel l‐ phenylalanine molecularly imprinted solid‐phase extraction sorbent was synthesized by the combination of Pickering emulsion polymerization and ion‐pair dummy template imprinting. Compared to other polymerization methods, the molecularly imprinted polymers thus prepared exhibit a high specific surface, large pore diameter, and appropriate particle size. The key parameters for solid‐phase extraction were optimized, and the result indicated that the molecularly imprinted polymer thus prepared exhibits a good recovery of 98.9% for l‐ phenylalanine. Under the optimized conditions of the procedure, an analytical method for l‐ phenylalanine was well established. By comparing the performance of the molecularly imprinted polymer and a commercial reverse‐phase silica gel, the obtained molecularly imprinted polymer as an solid‐phase extraction sorbent is more suitable, exhibiting high precision (relative standard deviation 3.2%, n = 4) and a low limit of detection (60.0 ± 1.9 nmol·L^?1) for the isolation of l‐ phenylalanine. Based on these results, the combination of the Pickering emulsion polymerization and ion‐pair dummy template imprinting is effective for preparing selective solid‐phase extraction sorbents for the separation of amino acids and organic acids from complex biological samples.     

Preparation and Application of Urea Electrochemical Sensor Based on Chitosan Molecularly Imprinted Films

A novel urea electrochemical sensor was constructed based on chitosan molecularly imprinted films which were prepared by potentiostatic electrodeposition of chitosan in the presence of urea followed by eluting with 0.1 M KCl. Various techniques were carried out to investigate the formation of molecularly imprinted polymer (MIP) films and the performance of the sensor. According to our expectation, the urea MIP electrochemical sensor showed excellent selectivity to urea among the structural similarities and co‐existences, high linear sensitivity to urea in the range from 1.0×10^?8 to 4.0×10^?5 M with a detection limit of 5.0×10^?9 M. Furthermore, the recovery ranged from 96.3 % to 103.3 % and therefore offered great potential for clinical diagnosis applications.     

An Electrochemical Sensor for L-Tryptophan Using a Molecularly Imprinted Polymer Film Produced by Copolymerization of o-Phenylenediamine and Hydroquinone

An electrochemical sensor for L-tryptophan based on a molecularly imprinted polymer was developed. The sensing film was prepared by the co-electropolymerization of o-phenylenediamine and hydroquinone on a gold electrode in the presence of L-tryptophan as the template. The performance of the L-tryptophan sensor was characterized by cyclic voltammetry, differential pulse voltammetry, and alternating current impedance. Under the optimal experimental conditions, the relative current change was linear to the concentration of L-tryptophan in the range of 1.0 × 10^?8 to 1.0 × 10^?6 mol/L and a detection limit of 0.50 × 10^?8 mol/L was obtained. The sensor showed high sensitivity and selectivity for L-tryptophan. The imprinting factor was 3.58 and selectivity factors of L-tryptophan compared to analogs were larger than 2. The sensor also demonstrated good resistance to acidic, basic, and organic environments.     

On-Line Preconcentration and Analysis of Metribuzin Residues in Corn Fields by Use of a Molecularly Imprinted Polymer

A molecularly imprinted polymer as a selective solid-phase extraction adsorbent for efficient preconcentration and analysis of metribuzin residues in corn fields has been synthesised and evaluated. Results showed that molecular imprinting of the polymer was highly effective and the polymer had high affinity and selectivity for metribuzin in water-containing systems. A monolithic column containing molecularly imprinted polymer was prepared and used for on-line preconcentration, separation, and detection of metribuzin residues in soil sampled during investigation of the degradation of the herbicide metribuzin in corn fields. The detection limit of the method was 8.3 × 10^?4 mg kg^?1, recovery was between 94.9% and 103%, and RSD in analysis of soil samples was less than 3.2%.     

An Impedance Molecularly Imprinted Sensor for the Detection of Bovine Serum Albumin (BSA) Using the Dynamic Electrochemical Impedance Spectroscopy

A molecularly imprinted electrochemical sensor is successfully developed to detect bovine serum albumin (BSA) based on the dynamic electrochemical impedance spectroscopy (DEIS) instead of the traditional impedance spectroscopy. The sensor is prepared using chitosan and pyrrole as modified material and functional monomers, respectively, and the fast and real‐time characterization of molecular imprinting process can be obtained by DEIS. It is indicated that the removal and rebinding processes of BSA are closely related with the DEIS impedance under dynamic conditions, and the direct correlation between the resulting kinetic information and BSA concentrations can be established. As a result, the impedance changing rates in the initial 5 min of BSA adsorption are linear to the BSA concentrations ranging from 0.0001 to 0.01 ng mL^?1 and 0.01 to 1 ng mL^?1 with a detection limit of 5×10^?5 ng mL^?1 (S/N=3). In addition, the detection of BSA by DEIS does not require the system to be in equilibrium. The sensor also shows simplicity, high sensitivity, good stability and acceptable recovery in real samples, indicating its promising prospects in the fast and real‐time detection of proteins.     

Rational Design of In Situ Monolithic Imprinted Polymer Membranes for the Potentiometric Sensing of Diethyl Chlorophosphate – a Chemical Warfare Agent Simulant

Molecularly imprinted polymer membrane was prepared by semicovalent imprinting strategy wherein i) the template diethyl chlorophosphate (DCP), (a simulant of organophosphorous nerve agents), is covalently linked to the reactive functional monomer vinyl aniline (VA) during imprinting step followed by noncovalent rebinding and ii) in situ polymerization via single pot synthesis in presence of additional functional monomer, 2‐hydroxyethyl methacrylate (HEMA) and crosslinking monomer, ethylene glycol dimethacrylate (EGDMA) after addition of 2‐nitrophenyl octyl ether (NPOE) and 2,2′‐azobisisobutyronitrile (AIBN) as plasticizer and initiator respectively. The resulting membrane is integrated with a potentiometric transducer while designing a DCP sensor. The fabricated sensor responds over a wider concentration range of 10^?6–10^?2 M with a lower detection limit of 10^?6 M (0.17 ppm). In addition, in situ monolithic membrane based sensor was designed by adopting noncovalent imprinting strategy also. A detailed comparison is made between semicovalent and noncovalent in situ membrane based sensors on the prime sensor performance criteria such as sensitivity, selectivity, working range, response time, reusability and reversibility. Again, the relative merits and demerits of semicovalent vis‐à‐vis noncovalent strategy based in situ monolithic membrane sensors were also highlighted. The probable molecular recognition mechanism is also discussed.     

Enhanced electrochemiluminescence of luminol at the gold nanoparticle/carbon nanotube/electropolymerised molecular imprinting composite membrane interface for selective recognition of triazophos

This paper reports a surface molecular self-assembly strategy for imprinting triazophos in the electropolymerised poly(aminthiophenol) (PATP) membranes at the surface of gold nanoparticle (AuNP)/carbon nanotube (CNT) composites modified glassy (GC) electrode for electrochemiluminescent (ECL) detection of pesticide triazophos. The electrochemical and ECL behaviours of luminol at the imprinted PATP/AuNP/CNT/GC electrode were investigated before and after the rebinding of triazophos. It was also found that the ECL intensity was strikingly enhanced by the adsorbed triazophos molecules in the imprinted PATP/AuNP/CNT composite membranes, which was about 5.2-fold as compared with the blank ECL intensity. On this basis, the molecularly imprinted polymer (MIP)-ECL sensor is established for high sensitive and selective detection of triazophos residues in vegetable samples. The resulting MIP-ECL sensor shows wide linear ranges from 3.1 × 10^?8 to 3.1 × 10^?5 g L^?1 with lower detection limit of 3.1 × 10^?9 g L^?1 for triazophos. Moreover, the MIP-ECL sensor has the advantages of high sensitivity, speed, specificity, stability and can become a promising technique for organophosphate pesticide detection.     

Electrochemical Determination of Tetracycline Using Molecularly Imprinted Polymer Modified Carbon Nanotube‐Gold Nanoparticles Electrode

This paper reports the use of a tetracycline (TC) sensor constructed from a combination of molecularly imprinted polymer (MIP) and gold nanoparticles modified multiwall carbon nanotubes (MWNTs‐GNPs). The results demonstrated that the amount of recognition sites in the polymer was significantly increased and the electron transfer ability of the sensor was improved. The relationship between the peak current and the TC concentration was linear in the range from 0.1 to 40 mg L^?1, and the detection limit was 0.04 mg L^?1 (S/N=3). The peak current to TC was 4.3, 6.2 and 6.8 times larger than that of oxytetracycline, chloramphenicol and nafcillin, respectively. Thus, the combination of MIP and MWNTs‐GNPs provides a sensitive and selective electrochemical detection method for tetracycline.     

Determination of 2,6-Dichlorophenol by Surface-Enhanced Raman Scattering with Molecular Imprinting

A novel method has been reported for 2,6-dichlorophenol using surface-enhanced Raman scattering (SERS). SiO₂/gold composites were selected as the SERS substrates to provide the response of gold nanoparticles. Molecular imprinting was subsequently used for the development of a specific detector to 2,6-dichlorophenol with precipitation polymerization. The molecularly imprinted polymer provided sensitive and selective SERS detection for the determination of 2,6-dichlorophenol. The intensity and concentration obeyed a linear relationship from 1?×?10^?5 to 1?×?10^?9?mol?L^?1 2,6-dichlorophenol. The sensitivity of SERS with the molecularly imprinted polymers provides a promising approach for practical analysis.