Studies on kinetics and mechanism of oxidation of D‐sorbitol and D‐mannitol by cerium(IV) in aqueous micellar sulfuric acid media

The kinetics and mechanism of cerium(IV) oxidation of hexitols, i.e. D ‐sorbitol and D ‐mannitol, in aqueous sulfuric acid media have been studied in the presence and absence of surfactants. Under the kinetic conditions, [S]_T ? [Ce(IV)]_T, where [S]_T is the total substrate (D ‐sorbitol or D ‐mannitol) concentration, the overall process shows a first‐order dependence on [Ce(IV)]_T and [S]_T. The process is acid catalyzed and inhibited by [HSO]. From the [HSO] dependence, it has been noted that the both Ce(SO₄)²⁺ and Ce(SO₄)₂ have been found kinetically active. The different rate constants in the presence and absence of surfactants have been estimated with the activation parameters. N‐cetylpyridinium chloride has been found to retard the oxidation process of hexitols, whereas sodium dodecyl sulfate has been found to accelerate the rate process. All these findings including the micellar effects have been interpreted in terms of the proposed reaction mechanism and partitioning behavior of the kinetically active different species of Ce(IV) between the aqueous and pseudomicellar phase. © 2008 Wiley Periodicals, Inc. 40: 445–453, 2008     

Permanganate transfer and reduction by D‐glucose in benzene–cetyltrimethylammoniumbromide aqueous solution: A kinetic study

The addition of cationic surfactant, cetlytrimethylammoniumbromide (CTAB), in benzene and aqueous potassium permanganate solution brought the MnO from the aqueous phase to the organic phase. At 525 nm, the absorbance of the organic phase increased until it reached a maximum, and then decreased with [CTAB]. The effect of [CTAB] on the reduction of permanganate by D ‐glucose in a benzene–CTAB system has been studied spectrophotmetrically. The observed effect on the rate constant is catalytic up to a certain concentration of CTAB; thereafter, a saturation phenomenon is observed with an increased concentration of CTAB. The oxidation reaction obeyed the first‐order kinetics with respect to the D ‐glucose. On addition of H₂SO₄, there was a decrease in the rate constants. There is evidence for the existence of manganese as a water‐soluble colloidal MnO₂. A detailed mechanism with the associated reaction kinetics is presented and discussed. © 2008 Wiley Periodicals, Inc. 40: 496–503, 2008     

Visible light induced free radical promoted cationic polymerization using thioxanthone derivatives

The free radical promoted cationic polymerization cyclohexene oxide (CHO), was achieved by visible light irradiation (λ_inc = 430–490 nm) of methylene chloride solutions containing thioxanthone‐fluorene carboxylic acid (TX‐FLCOOH) or thioxanthone‐carbazole (TX‐C) and cationic salts, such as diphenyliodonium hexafluorophosphate (Ph₂I⁺PF) or silver hexafluorophosphate (Ag⁺PF) in the presence of hydrogen donors. A feasible initiation mechanism involves the photogeneration of ketyl radicals by hydrogen abstraction in the first step. Subsequent oxidation of ketyl radicals by the oxidizing salts yields Bronsted acids capable of initiating the polymerization of CHO. In agreement with the proposed mechanism, the polymerization was completely inhibited by 2,2,6,6‐tetramethylpiperidinyl‐1‐oxy and di‐2,6‐di‐tert‐butylpyridine as radical and acid scavengers, respectively. Additionally polymerization efficiency was directly related to the reduction potential of the cationic salts, that is, Ag⁺PF (E = +0.8 V) was found to be more efficient than Ph₂I⁺PF (E = ?0.2 V). In addition to CHO, vinyl monomers such as isobutyl vinyl ether and N‐vinyl carbazole, and a bisepoxide such as 3,4‐epoxycyclohexyl‐3′,4′‐epoxycyclohexene carboxylate, were polymerized in the presence of TX‐FLCOOH or TX‐C and iodonium salt with high efficiency. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Micellar Catalysis on Pentavalent Vanadium Ion Oxidation of D-Sorbitol in Aqueous Acid Media: A Kinetic Study

Vanadium(V) oxidation of D-sorbitol shows a first-order dependency on the concentrations of D-sorbitol, vanadium(V), H⁺ and HSO₄⁻. These observations remain unaltered in the presence of externally added surfactants. The effects of the cationic surfactant (i.e., CPC), anionic surfactant (i.e., SDS) and neutral surfactant (i.e., TX-100) have been studied. CPC inhibits the reactions whereas SDS and TX-100 accelerate the reaction to different extents. SDS and TX-100 can be used as catalysts in the production of D-glucose from D-sorbitol.     

Mass spectrometric evidence for collisionally induced removal of H2 from monoanions of 10B nido‐carborane derivatives investigated by electrospray ionization quadrupole linear ion trap and Fourier transform ion cyclotron resonance mass spectrometry

Some newly synthesized ¹⁰B nido‐carborane derivatives, i.e., 7,8‐dicarba‐nido‐undecaborane monoanions ([7‐Me‐8‐R‐C₂B₉H₁₀]^‐K⁺, R = H, butyl, hexyl, octyl and decyl), have been fully characterised and examined by electrospray ionization and Fourier transform ion cyclotron resonance mass spectrometry with liquid chromatographic separation (LC/ESI‐FTICR‐MS). These boron‐containing compounds exhibit abundant molecular ions ([M]^?) at m/z 140.22631 [CB₉H₁₄]^?, m/z 196.28883 [CB₉H₂₂]^?, m/z 224.32032 [CB₉H₂₆]^?, m/z 252.35133 [CB₉H₃₀]^? and m/z 280.38354 [CB₉H₃₄]^? at the normal tube lens voltage setting of ?90 V, which was an instrumental parameter value selected in the tuning operation. Additional [M–nH₂]^? (n = 1?4) ions were observed in the mass spectra when higher tube lens voltages were applied, i.e., ?140 V. High‐resolution FTICR‐MS data revealed the accurate masses of fragment ions, bearing either an even or an odd number of electrons. Collision‐induced dissociation of the [M–nH₂]^? ions (n = 0–4) in the quadrupole linear ion trap (LTQ) analyzer confirmed the loss of hydrogen molecules from the molecular ions. It is suggested that the loss of H₂ molecules from the alkyl chain is a consequence of the stabilization effect of the nido‐carborane charged polyhedral skeleton. Copyright © 2009 John Wiley & Sons, Ltd.     

Role of manganese(II), micelles,and inorganic salts on the kinetics of the redox reaction of L‐sorbose and chromium(VI)

The kinetics of the reduction of chromium(VI) to chromium(III) by L ‐sorbose in HClO₄ was studied between 30 and 80°C at various concentrations of reactants and acidities in both aqueous and micellar sodium dodecyl sulfate (SDS)/TritonX‐100(TX‐100) solutions. Under pseudo‐first‐order conditions the reaction rate is fractional‐order in [L ‐sorbose] and [H⁺], and first‐order in [Cr^VI] both in the absence and in the presence of surfactant micelles. The reaction is accelerated by addition of manganese(II) and is routed through the same mechanism as shown by the kinetic studies in the absence and presence of surfactants. The rate enhancement in presence of SDS/TX‐100 micelles indicates that essentially all the reactive species are bound to micelles under the experimental conditions. The observed catalyses are explained with the modified Menger and Portnoy model. Inorganic salts (NaBr, LiBr, NH₄Br) inhibit the reaction in presence of SDS micelles, which confirms exclusion of the reactive species of chromium(VI) from the reaction site. © 2003 Wiley Periodicals, Inc. Int J Chem Kinet 35: 543–554, 2003     

Determination of the crystallinity of polyethylene/α‐olefin copolymers by thermal analysis: Relationship of the heat of fusion of 100% polyethylene crystal and the density

The heat of fusion measured with differential scanning calorimetry (DSC) is typically divided by a constant value of the heat of fusion of 100% polyethylene (PE) crystal (ΔH) for the estimation of the fraction crystallinity of PE copolymers, regardless of the density [i.e., the short‐chain branching (SCB) concentration]. In this work, values of ΔH of about 288 J/g were determined with a combined DSC and X‐ray diffraction (XRD) method for a series of PE copolymers containing SCB from 0 to 50 Br/1000 C (density = 0.965–0.865 g/cc). There was no systematic change in ΔH observed across this density range. This result supports the suitability of determining the fraction crystallinity of PE of any density by the simple division of the observed heat of fusion determined by DSC by a constant value of ΔH. This DSC method yielded values of PE crystallinity in good agreement with corresponding values determined by XRD for a series of PE copolymers. The determination of ΔH involved a small precision error for higher density (lower SCB) PEs, but the precision error increased for lower density (i.e., higher SCB) PEs. This was due to the difficulty in measuring the heat of fusion for lower density PEs, which exhibited low values of the heat of fusion and melted only slightly above room temperature, and due to the difficulty of measuring lower values of crystallinity by XRD. The crystal thickness measured by small‐angle X‐ray scattering for this series of PE copolymers decreased exponentially from about 280 to 6 Å. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1637–1643, 2002     

Kinetics of interaction of Histidine and Histidine Methyl Ester with Ninhydrin in micellar media

Kinetics of the interaction of histidine and histidine methyl ester with ninhydrin under varying concentrations of reactants, anionic (sodium dodecyl sulphate, SDS), cationic (cetyltrimethylammonium bromide, CTAB) and non‐ionic (Triton X‐100, TX‐100) micelles have been carried out. Rate of the reaction was found to be independent of the initial concentration of histidine (and histidine methyl ester) but was dependent on [Ninhydrin]. The SDS micelles had no effect on the rate of the reaction. In the presence of the CTAB micelles a small enhancement in the rate was observed. The rate − [CTAB] profile showed that the increase in [CTAB] increased the rate up to a maximum value and a further increase had a decreasing effect on the rate. The rate was enhanced by TX‐100 also but, unlike CTAB micelles, TX‐100 possessed a curve without peak for the rate − [TX‐100] profile. The following rate equation was obeyed by the reaction in CTAB and TX‐100 micelles: Values of k_w, k_m, and K_S were evaluated and are reported herein. ©1999 John Wiley & Sons, Inc. Int J Chem Kinet 31: 103–111, 1999     

Lactide polymerization activity of alkoxide,phenoxide, and amide derivatives of yttrium(III) arylamidinates

In quest of new, single‐site catalysts for cyclic ester polymerizations, a series of mononuclear yttrium(III) complexes of N,N′‐bis(trimethylsilyl)benzamidinate ([L^TMS]⁻) and hindered N,N′‐bis‐(2,6‐dialkylaryl)toluamidinates ([L^Et]⁻, aryl = Et₂C₆H₃, and [L^iPr]⁻, aryl = ⁱPr₂C₆H₃) were synthesized and characterized by X‐ray diffraction: LY(μ‐Cl)₂Li(TMEDA) ( 1 ), LY(OC₆H₂^tBu₂Me) ( 2 ), LY(OC₆H₃Me₂)₂Li(THF)₄ ( 3 ), LY(μ‐O^tBu)₂Li(THF) ( 4 ), L^iPrY[N(SiMe₂H)₂]₂(THF) ( 5 ), LY(THF)(Cl)(μ‐Cl)Li(THF)₃ ( 6 ), and LY[N(SiMe₂H)₂] ( 7 ). Coordination numbers ranging from five to seven were observed, and they appeared to be controlled by the steric bulk of the supporting amidinate and alkoxide, phenoxide, or amide coligands. Complexes 2 – 5 and 7 are active catalysts for the polymerization of D,L ‐lactide (e.g., with 2 and added benzyl alcohol, 1000 equiv of D,L ‐lactide were polymerized at room temperature in less than 1 h, with polydispersities less than 1.5). The neutral complexes 2 , 5 , and 7 were more effective than the anionic complexes 3 and 4 . In addition, the presence of the more hindered amidinate ligands [L^Et]⁻ and [L^iPr]⁻ on yttrium‐amides slowed the polymerizations ( 7 < 5 < Y[N(SiMe₂H)₂]₃). © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 284–293, 2001     

Mechanistic investigation of vibrational fine structure in e‐H2 scattering using local complex potential‐based time dependent wave packet approach

The structural features of vibrational excitation cross‐sections in resonant e‐H₂ scattering have been investigated using a time dependent wave packet approach and a local complex potential to describe the ²Σ H anion. An analysis of the partial contributions to the vibrational excitation cross‐sections reveals that all features of the excitation profile result from simple interference between bound vibrational levels of H₂ and H. © 2008 Wiley Periodicals, Inc. Int J Quantum Chem, 2008     

Kinetics and mechanism of oxidation of benzohydrazide by bromate catalyzed by vanadium(IV) in aqueous acidic medium

The reaction between benzohydrazide and potassium bromate catalyzed by vanadium(IV) was studied under pseudo‐first‐order condition keeping large excess of hydrazide concentration over that of the oxidant. The initiation of the reaction occurs through oxidation of the catalyst vanadium(IV), VO²⁺, to vanadium(V), VO, which then reacts with hydrazide to give N,N′‐diacylhydrazine and benzoic acid as the products. The order in [H⁺] is found to be two, and its effect is due to protonation and hydrolysis of oxidized form of the catalyst to form HVO₃. The oxidized form of the catalyst, VO, forms a complex with the protonated hydrazide as evidenced by the occurrence of absorption maxima at 390 nm. The rate of the reaction remains unaffected by the increase in the ionic strength. The activation parameters were determined, and data support the mechanism. The detailed mechanism and the rate equation are proposed for the reaction. © 2008 Wiley Periodicals, Inc. Int J Chem Kinet 40: 151–159, 2008     

Electrochemical sensor for superoxide anion radical using polymeric iron porphyrin complexes containing axial 1‐methylimidazole ligand as cytochrome c mimics

A needle‐type electrochemical sensor for the facile detection of superoxide anion radical (O) was devised using an electrodeposited film of a polymeric porphyrin complex attached to a carbon microelectrode which was placed in a stainless steel 18G needle tube as an auxiliary electrode. The sensing element was prepared by means of electropolymerization of bromoiron(III) meso‐ tetra(3‐thienyl)porphyrin in the presence of 1‐methylimidazole in CH₂Cl₂ containing 100 mM tetrabutylammonium perchlorate (TBAP) as a supporting electrolyte, which gave a smooth film of the corresponding polymer. The film was electrochemically active to give a redox response near −0.05 V versus Ag/AgCl due to the iron(II/III) couple. The microsensor was applied to detect O produced by xanthine oxidation catalyzed by xanthine oxidase. The amperometric response for O was monitored at an electrode potential of 0.5 V versus the auxiliary electrode in a 10 mM phosphate buffer. The microsensor displayed a high catalytic activity for the oxidation of O and showed a linear relationship between the current and the O concentration. Axial coordination of an imidazole ligand to the iron porphyrin center enhanced selectivity for O by impeding the undesired coordination of H₂O₂ that resulted from the dismutation of O. Copyright © 2005 John Wiley & Sons, Ltd.     

Negative ion fragmentations of deprotonated peptides containing post‐translational modifications. An unusual cyclisation/rearrangement involving phosphotyrosine; a joint experimental and theoretical study

The characteristic fragmentations of a pTyr group in the negative ion electrospray mass spectrum of the [M–H]^? anion of a peptide or protein involve the formation of PO (m/z 79) and the corresponding [(M‐H)^?–HPO₃]^? species. In some tetrapeptides where pTyr is the third residue, these characteristic anion fragmentations are accompanied by ions corresponding to H₂PO and [(M‐H)^?–H₃PO₄]^? (these are fragmentations normally indicating the presence of pSer or pThr). These product ions are formed by rearrangement processes which involve initial nucleophilic attack of a C‐terminal ‐CO [or ‐C(?NH)O^?] group at the phosphorus of the Tyr side chain [an S_N2(P) reaction]. The rearrangement reactions have been studied by ab initio calculations at the HF/6‐31+G(d)//AM1 level of theory. The study suggests the possibility of two processes following the initial S_N2(P) reaction. In the rearrangement (involving a C‐terminal carboxylate anion) with the lower energy reaction profile, the formation of the H₂PO and [(M‐H)^?–H₃PO₄]^? anions is endothermic by 180 and 318 kJ mol^?1, respectively, with a maximum barrier (to a transition state) of 229 kJ mol^?1. The energy required to form H₂PO by this rearrangement process is (i) more than that necessary to effect the characteristic formation of PO from pTyr, but (ii) comparable with that required to effect the characteristic α, β and γ backbone cleavages of peptide negative ions. Copyright © 2009 John Wiley & Sons, Ltd.     

Bis[N-(trimethylsilyl)iminobenzoyl]phosphanide des Lithiums und Zinks – Synthese sowie NMR-spektroskopische,strukturelle und quantenchemische Untersuchungen

Acyl- and Alkylidenephosphanes. XXXV. Bis[ N -(trimethylsilyl)iminobenzoyl]phosphanides of Lithium and Zinc – Syntheses as well as NMR Spectroscopic, Structural, and Quantumchemical Studies From the reaction of bis(tetrahydrofuran)lithium bis(trimethylsilyl)phosphanide with two equivalents of benzonitrile in 1,2-dimethoxyethane, the yellow dme complex ( 2 a ) of lithium bis[N-(trimethylsilyl)iminobenzoyl]phosphanide ( 2 ) was obtained in 69% yield. However, the intermediate {1-[N-lithium-N-(trimethylsilyl)amido]benzylidene}trimethylsilylphosphane ( 1 ), formed by an analogous 1 : 1 addition in diethyl ether, turned out to be unstable and as a consequence could be characterized by nmr spectroscopic methods only; attempts to isolate the compound failed, but small amounts of the neutral complex 2 b , with the ligands benzonitrile and tetrahydrofuran coordinated to lithium, precipitated. The reaction of compound 2 with zinc(II) chloride in diethyl ether gives the orange-red spiro-complex zinc bis{bis[N-(trimethylsilyl)iminobenzoyl]phosphanide} ( 3 ); this complex is also formed from bis[N-(trimethylsilyl)iminobenzoyl]phosphane ( 4 ), easily amenable by a lithium hydrogen exchange of 2 a with trifluoroacetic acid [18], and zinc bis[bis(trimethylsilyl)amide]. As derived from nmr spectroscopic studies and x-ray structure determinations, compounds 2 a {δ³¹P +63.3 ppm; P2₁/n; Z = 4; R₁ = 0.067}, 2 b {δ³¹P +63.3 ppm; P2₁/c; Z = 4; R₁ = 0.063}, 3 {δ³¹P +58.2 ppm; C2/c; Z = 4; R₁ = 0.037} and 4 {δ³¹P +58.1 ppm [18]} exist as cyclic 3-imino-2λ³σ²-phosphapropenylamides and -propenylamine, respectively, in solution as well as in the solid state. Unlike hydrogen derivative 4 the bis[N-(trimethylsilyl)iminobenzoyl]phosphanide fragments N,N′-coordinating either a lithium or a zinc cation are characterized by almost completely equalized bond lengths; typical mean distances and angles are: PC 180.3 and 178.7; CN 130.5 and 131.8; N–Si 175.3 and 179.3; N–Li 202.3; N–Zn 203.5 pm; CPC 108.8° and 110.5°; PCN 130.9° and 132.9°; CN–Li 113.0°, CN–Zn 117.4°; N–Li–N 104.6°; N–Zn–N 108.8°. Alterations in the shape of the six membered chelate rings, caused by an exchange of the 3-imino-2λ³σ²-phosphapropenylamide or related 2λ³σ²-phospha-1,3-dionate units for the corresponding phosphorus free ligands, are discussed in detail. The results of quantumchemical DFT-B3LYP calculations coincide very well with the experimentally obtained findings.     

A method to calculate the one‐electron reduction potentials for nitroaromatic compounds based on gas‐phase quantum mechanics

Nitroaromatic compounds (NACs) are widespread environmental contaminants, and the one‐electron reduction potential (E) is an important parameter used in modeling their environmental fate. We have identified a method that is both accurate and efficient to predict E values for NACs, using gas‐phase quantum mechanics (QM) calculations combined with empirical correlations. First, the adiabatic electron affinity (EA) at 0 K is calculated using the B98/MG3S method, and the predictions are scaled by a factor of 0.802 to account for systematic errors in the density functional calculations. Second, the E values are predicted from a linear correlation between E and EA. Using this method, E values were predicted with a mean absolute deviation from measured values of 0.021 V for the 14 NACs used to obtain the correlation and 0.029 V for six additional NACs. This represents a substantial improvement in accuracy over predictions by other QM methods, which are affected by large errors in solvation or aqueous‐phase calculations for some compounds. © 2010 Wiley Periodicals, Inc. J Comput Chem, 2010.     

Cationic grafting from carbon black. VIII. Cationic ring-opening polymerization and copolymerization of oxepane initiated by acylium perchlorate groups on carbon black

The cationic ring-opening polymerization of oxepane was found to be initiated by carbon black having acylium perchlorate (CO⁺CIO) groups, which were introduced by the reaction of acyl chloride groups with silver perchlorate. It was confirmed that polyoxepane, i.e., poly(oxyhexamethylene), was propagated from CO⁺CIO groups on carbon black and effectively grafted on the surface. The rate of the polymerization and the percentage of grafting of poly(oxyhexamethylene) remarkably increased by the addition of epichlorohydrin (ECH) as a promoter: the percentage of grafting in the presence of ECH increased to about 100% with an increase in conversion. Furthermore, CO⁺CIO groups on carbon black have an ability to initiate the cationic ring-opening copolymerization of oxepane with ECH to give poly(oxepane-co-ECH) with various composition. The ring-opening copolymerization of oxepane with phthalic anhydride was also initiated by CO⁺CIO groups to give polyether ester, i.e., poly(hexamethylene phthalate) containing poly(oxyhexamethylene) sequence. In the copolymerization, polyether or polyether ester was effectively grafted from carbon black based on the propagation of these polymers from CO⁺CIO groups.     

Stable complex C2H4Al4Li3− and its similarity with bicyclo[2.2.0]hex‐2‐ene: A DFT study

We propose that complexation of all metal antiaromatic Al₄Li with C₂H₄ may lead to stable C₂H₄Al₄Li species [II(b)]. Complexation leads to the electron transfer from Al₄Li moiety to C₂H₄ and development of aromatic character in the Al₄ ring. Our proposed compound C₂H₄Al₄Li [II(b)] is very similar to the existing organic compound bicyclo[2.2.0]hex‐2‐ene [I(b)]. The complex C₂H₄Al₄Li [II(b)] can be imagined as an analogue of bicyclo[2.2.0]hex‐2‐ene [I(b)] achieved by a simple replacement of C₄H₄ in the later with π‐isoelectronic Al₄Li moiety in the former. © 2010 Wiley Periodicals, Inc. Int J Quantum Chem, 2010     

Solvation Chemistry of DL‐Nor‐Valine in Aqueous Mixture of Dipolar Aprotic N,N‐Dimethyl Formamide

In this article, we reported the solubilities of the amino acid DL‐nor‐valine (VAL) at five equidistant temeratures i.e. from 15 to 35 °C in aqueous mixtures of N,N‐dimethyl formamide (DMF). The Standard free energies (ΔG (i)) and entropies (ΔS (i)) of transfer of VAL from water to aqueous mixture of cationophilic dipolar aprotic DMF have been evaluated at 25 °C. The transfer of Gibbs energies (ΔG (i)) and entropies (TΔS (i)) due to the chemical effects have been obtained after elimination of cavity effect, estimated by the scaled particle theory and dipole‐dipole interaction effects, computed by the used of Keesom‐orientation expression. The chemical contribution of transfer energetics of DL‐nor‐valine (VAL) are mainly guided by the composite effects of increased dispersion interaction, basicity effect and decreased acidity, hydrogen bonding effects, hydrophilic hydration and hydrophobic hydration of aqueous DMF mixtures as compared to that of reference solvent, water.     

Kinetic study of the interaction of adenosine 5′‐monophosphate with diaqua (2‐hydrazinopyridine) palladium(II) in aqueous medium

The interaction of the palladium(II) complex [Pd(hzpy)(H₂O)₂]²⁺, where hzpy is 2‐hydrazinopyridine, with purine nucleoside adenosine 5′‐monophosphate (5′‐AMP) was studied kinetically under pseudo‐first‐order conditions, using stopped‐flow techniques. The reaction was found to take place in two consecutive reaction steps, which are both dependent on the actual 5′‐AMP concentration. The activation parameters for the two reaction steps, i.e. ΔH = 32 ±2 kJ mol^?1, ΔS = ?168 ±7 J K^?1 mol^?1, and ΔH = 28 ± 1 kJ mol^?1, ΔS = ?126 ± 5 J K^?1 mol^?1, respectively, were evaluated and suggested an associative mode of activation for both substitution processes. The stability constants and the associated speciation diagram of the complexes were also determined potentiometrically. The isolated solid complex was characterized by C, H, and N elemental analyses, IR, magnetic, and molar conductance measurements. © 2009 Wiley Periodicals, Inc. Int J Chem Kinet 42: 132–142, 2010