A versatile Ru catalyst for the asymmetric transfer hydrogenation of both aromatic and aliphatic sulfinylimines

A highly efficient Ru catalyst based on an achiral, very simple, and inexpensive amino alcohol ligand (2‐amino‐2‐methylpropan‐1‐ol) has been developed for the asymmetric transfer hydrogenation (ATH) of chiral N‐(tert‐butylsulfinyl)imines. This complex is able to catalyze the ATH of both aromatic and the most challenging aliphatic sulfinylimines by using isopropyl alcohol as the hydrogen source. The diastereoselective reduction of aromatic, heteroaromatic, and aliphatic sulfinylketimines, including sterically congested cases, over short reaction times (1–4 h), followed by desulfinylation of the nitrogen atom, affords the corresponding highly enantiomerically enriched (ee up to >99 %) α‐branched primary amines in excellent yields. The same ligand was equally effective for the synthesis of both (R)‐ and (S)‐amines by using the appropriate absolute configuration in the iminic substrate. DFT mechanistic studies show that the hydrogen‐transfer process is stepwise. Moreover, the origin of the diastereoselectivity has been rationalized.     

Synthesis of Novel Monodentate Phosphoramidites and Their Application in Iridium‐Catalyzed Asymmetric Hydrogenations

New monodentate H₈‐binaphthol based phosphoramidites 6 b–i have been prepared. Starting from (S)‐3,3′‐dibromo‐5,5′,6,6′,7,7′,8,8′‐octahydro‐1,1′‐binaphthyl‐2,2′‐diol 3 , a general protocol for the synthesis of ligands 6 is presented. A small ligand library bearing aryl substituents in the 3,3′‐position of the binaphthol core was synthesized and successfully tested in the iridium‐catalyzed asymmetric hydrogenation of 2‐amidocinnamates to obtain different α‐amino acid derivatives in up to 99 % ee.     

Transition States of Binap–Rhodium(I)‐Catalyzed Asymmetric Hydrogenation: Theoretical Studies on the Origin of the Enantioselectivity

By using the hybrid IMOMM(B3LYP:MM3) method, we examined the binap–Rh^I‐catalyzed oxidative‐addition and insertion steps of the asymmetric hydrogenation of the enamide 2‐acetylamino‐3‐phenylacrylic acid. We report a path that is energetically more favorable for the major enantiomer than for the minor enantiomer. This path follows the “lock‐and‐key” motif and leads to the major enantiomeric product via an energetically favorable binap–dihydride–Rh^III–enamide complex. Our theoretical results are consistent with the mechanism that takes place via Rh^III dihydride formation, that is, oxidative addition of H₂ followed by enamide insertion.     

水相不对称转移氢化*

手性醇和胺是重要的精细化学品,不对称转移氢化是获得这类手性化合物有效、实用的途径之一。在众多的催化剂中,Noyori等发展的手性二胺与过渡金属钌TsDPEN-Ru（TsDPEN = 1,2-二苯基乙二胺）络合物是最有效的催化剂。近年来,随着化学家对绿色化学的日益重视,水作为绿色溶剂被广泛地用作为不对称催化转移氢化的反应介质,具有很高的反应活性、对映选择性和化学选择性。本文综述近年来应用未经修饰和修饰的手性二胺配体与过渡金属钌[(cymene)RuCl₂]₂、铑[(Cp*)RhCl₂]₂和铱[(Cp*)IrCl_2]2的络合物催化的水相中酮、亚胺和活化烯烃的不对称转移氢化的研究进展。     

Furfural Hydrogenation on Nickel‐promoted Cu‐containing Catalysts Prepared from Hydrotalcite‐Like Precursors

The nickel‐promoted Cu‐containing catalysts (Cu_xNi_y‐MgAlO) for furfural (FFR) hydrogenation were prepared from the hydrotalcite‐like precursors, and characterized by X‐ray powder diffraction, inductively‐coupled plasma atomic emission spectroscopy, N₂ adsorption‐desorption, UV‐Vis diffuse reflectance spectra and temperature‐programmed reduction with H₂ in the present work. The obtained catalysts were observed to exhibit a better catalytic property than the corresponding Cu‐MgAlO or Ni‐MgAlO samples in FFR hydrogenation, and the CuNi‐MgAlO catalyst with the actual Cu and Ni loadings of 12.5 wt% and 4.5 wt%, respectively, could give the highest FFR conversion (93.2%) and furfuryl alcohol selectivity (89.2%). At the same time, Cu⁰ species from the reduction of Cu²⁺ ions in spinel phases were deduced to be more active for FFR hydrogenation.     

Ruthenium‐Catalyzed Tandem‐Isomerization/Asymmetric Transfer Hydrogenation of Allylic Alcohols

A one‐pot procedure for the direct conversion of racemic allylic alcohols to enantiomerically enriched saturated alcohols is presented. The tandem‐isomerization/asymmetric transfer hydrogenation process is efficiently catalyzed by [{Ru(p‐cymene)Cl₂}₂] in combination with the α‐amino acid hydroxyamide ligand 1 , and performed under mild conditions in a mixture of ethanol and THF. The saturated alcohol products are isolated in good to excellent chemical yields and in enantiomeric excess up to 93 %.     

Highly Enantioselective Synthesis of Indolines: Asymmetric Hydrogenation at Ambient Temperature and Pressure with Cationic Ruthenium Diamine Catalysts

A highly enantioselective synthesis of indolines by asymmetric hydrogenation of 1H‐indoles and 3H‐indoles at ambient temperature and pressure, catalyzed by chiral phosphine‐free cationic ruthenium complexes, has been developed. Excellent enantio‐ and diastereoselectivities (up to >99 % ee, >20:1 d.r.) were obtained for a wide range of indole derivatives, including unprotected 2‐substituted and 2,3‐disubstituted 1H‐indoles, as well as 2‐alkyl‐ and 2‐aryl‐substituted 3H‐indoles.     

Conformationally Flexible Biphenyl‐phosphane Ligands for Ru‐Catalyzed Enantioselective Hydrogenation

Stereomutation of a BIPHEP/RuCl ₂ /diamine complex (shown schematically) is possible because of the conformational flexibilty of BIPHEP ligands. The result is an asymmetric activation in the Ru‐catalyzed hydrogenation of carbonyl compounds to optically active alcohols. Whereas a racemic BINAP/RuCl₂ complex with a chiral diamine activator gives a 1:1 mixture of two diastereomers, unequal amounts of the diastereomers can be produced from a BIPHEP/RuCl₂ complex and a chiral diamine. Ar=3,5‐dimethylphenyl, BINAP=2,2′‐bis(diphenylphosphanyl)‐1,1′‐binaphthyl, BIPHEP=2,2′‐bis(diarylphosphanyl)biphenyl.     

Two precatalysts for application in asymmetric homogeneous hydrogenation

The title compounds, [(1R,1′R,2R,2′R)‐2,2′‐bis(diphenylphosphanyl)‐1,1′‐dicyclopentane](η⁴‐norbornadiene)rhodium(I) tetrafluoridoborate, [Rh(C₃₄H₃₆P₂)(C₇H₈)]BF₄, (I), and [(1R,1′R,2R,2′R)‐2,2′‐bis(diphenylphosphanyl)‐1,1′‐dicyclopentane][η⁴‐(Z,Z)‐cycloocta‐1,5‐diene]rhodium(I) tetrafluoridoborate dichloromethane monosolvate, [Rh(C₃₄H₃₆P₂)(C₈H₁₂)]BF₄·CH₂Cl₂, (II), are applied as precatalysts in asymmetric homogeneous hydrogenation, e.g. in the reduction of dehydroamino acids, affording excellent enantiomeric excesses [Zhu, Cao, Jiang & Zhang (1997). J. Am. Chem. Soc. 119 , 1799–1800].     

Synthesis and Structures of Two Dinuclear Transition Metal Complexes and Their Catalytic Applications in Hydrogenation of Ketones

The complexes [Ni₂(L)₂]₂ · H₂O ( 1 ) and [Cu₂(L)₂(H₂O)] · 2CH₃OH ( 2 ) were prepared by reaction of the chiral Schiff base ligand N‐[(1R,2S)‐2‐hydroxy‐1,2‐diphenyl]‐acetylacetonimine (H₂L) with Ni^II and Cu^II ions, respectively, aiming to develop economically and environmentally‐friendly catalysts for the hydrogenation of ketones. They have a dinuclear skeleton with axial vacant sites. The catalytic effects of the two complexes for hydrogenation of ketones were tested using dihydrogen gas as hydrogen source. They present some catalytic effects in hydrogenation of acetophenone, which has a dependence on the temperature and base used in these reactions. However, no apparent catalytic effects were found for the two complexes in hydrogenation of 4‐nitroacetophenone and 4‐methylacetophenone. Although the catalytic conversion in these hydrogenation reactions is low, they do represent a kind of cheap and environmentally‐friendly hydrogenation catalyst.     

Sulfone Group as a Versatile and Removable Directing Group for Asymmetric Transfer Hydrogenation of Ketones

The sulfone functional group has a strong capacity to direct the asymmetric transfer hydrogenation (ATH) of ketones in the presence of [(arene)Ru(TsDPEN)H] complexes by adopting a position distal to the η⁶‐arene ring. This preference provides a means for the prediction of the sense of asymmetric reduction. The sulfone group also facilitates the formation of a range of reduction substrates, and its ready removal provides a route to enantiomerically enriched alcohols that would otherwise be extremely difficult to prepare by direct ATH of the corresponding ketones.     

Chemoselectivity Control in the Asymmetric Hydrogenation of γ‐ and δ‐Keto Esters into Hydroxy Esters or Diols

The asymmetric hydrogenation of aromatic γ‐ and δ‐keto esters into optically active hydroxy esters or diols under the catalysis of a novel DIPSkewphos/3‐AMIQ–Ru^II complex was studied. Under the optimized conditions (8 atm H₂ , Ru complex/t‐C₄H₉OK=1:3.5, 25 °C) the γ‐ and δ‐hydroxy esters (including γ‐lactones) were obtained quantitatively with 97–99 % ee. When the reaction was conducted under somewhat harsh conditions (20 atm H₂ , [t‐C₄H₉OK]=50 mm , 40 °C), the 1,4‐ and 1,5‐diols were obtained predominantly with 95–99 % ee. The reactivity of the ester group was notably dependent on the length of the carbon spacer between the two carbonyl moieties of the substrate. The reaction of β‐ and ?‐keto esters selectively afforded the hydroxy esters regardless of the reaction conditions. This catalyst system was applied to the enantioselective and regioselective (for one of the two ester groups) hydrogenation of a γ‐?‐diketo diester into a trihydroxy ester.     

Chemoselective Hydrogenation of Functionalized Nitroarenes and Imines by Using Carbon Nanofiber‐Supported Iridium Nanoparticles

The reaction of three types of carbon nanofibers (CNFs; platelet: CNF‐P, tubular: CNF‐T, herringbone: CNF‐H) with Ir₄(CO)₁₂ in mesitylene at 165 °C provided the corresponding CNF‐supported iridium nanoparticles, Ir/CNFs (Ir content=2.3–2.6 wt. %). Transmission electron microscopy (TEM) studies of these Ir/CNF samples revealed that size‐controlled Ir nanoparticles (average particle size of 1.1–1.5 nm) existed on the CNFs. Among the three Ir/CNF samples, Ir/CNF‐T showed an excellent catalytic activity and chemoselectivity towards hydrogenation of functionalized nitroarenes and imines; the corresponding aniline derivatives were obtained with high turnover numbers at ambient temperature under 10 atm of H₂, and the catalyst is reusable. Ir/CNF‐T was also effective for the reductive N‐alkylation of anilines with carbonyl compounds.     

Rhodium‐Catalyzed [3+2+2] and [2+2+2] Cycloadditions of Two Alkynes with Cyclopropylideneacetamides

It has been established that a cationic rhodium(I)/H₈‐binap complex catalyzes the [3+2+2] cycloaddition of 1,6‐diynes with cyclopropylideneacetamides to produce cycloheptadiene derivatives through cleavage of cyclopropane rings. In contrast, a cationic rhodium(I)/(S)‐binap complex catalyzes the enantioselective [2+2+2] cycloaddition of terminal alkynes, acetylenedicarboxylates, and cyclopropylideneacetamides to produce spiro‐cyclohexadiene derivatives which retain the cyclopropane rings.     

Bifunctional Rhenium Complexes for the Catalytic Transfer‐Hydrogenation Reactions of Ketones and Imines

The silyloxycyclopentadienyl hydride complexes [Re(H)(NO)(PR₃)(C₅H₄OSiMe₂tBu)] (R=iPr ( 3 a ), Cy ( 3 b )) were obtained by the reaction of [Re(H)(Br)(NO)(PR₃)₂] (R=iPr, Cy) with Li[C₅H₄OSiMe₂tBu]. The ligand–metal bifunctional rhenium catalysts [Re(H)(NO)(PR₃)(C₅H₄OH)] (R=iPr ( 5 a ), Cy ( 5 b )) were prepared from compounds 3 a and 3 b by silyl deprotection with TBAF and subsequent acidification of the intermediate salts [Re(H)(NO)(PR₃)(C₅H₄O)][NBu₄] (R=iPr ( 4 a ), Cy ( 4 b )) with NH₄Br. In nonpolar solvents, compounds 5 a and 5 b formed an equilibrium with the isomerized trans‐dihydride cyclopentadienone species [Re(H)₂(NO)(PR₃)(C₅H₄O)] ( 6 a,b ). Deuterium‐labeling studies of compounds 5 a and 5 b with D₂ and D₂O showed H/D exchange at the H_Re and H_O positions. Compounds 5 a and 5 b were active catalysts in the transfer hydrogenation reactions of ketones and imines with 2‐propanol as both the solvent and H₂ source. The mechanism of the transfer hydrogenation and isomerization reactions was supported by DFT calculations, which suggested a secondary‐coordination‐sphere mechanism for the transfer hydrogenation of ketones.     

Catalytic Asymmetric Hydrogenation of Pyrimidines

The asymmetric hydrogenation of pyrimidines proceeded with high enantioselectivity (up to 99 % ee) using an iridium catalyst composed of [IrCl(cod)]₂, a ferrocene‐containing chiral diphosphine ligand (Josiphos), iodine, and Yb(OTf)₃ (cod=1,5‐cyclooctadiene). The chiral catalyst converted various 4‐substituted pyrimidines into chiral 1,4,5,6‐tetrahydropyrimidines in high yield. The lanthanide triflate is crucial for achieving the high enantioselectivity as well as for activating the heteroarene substrate.     

Asymmetric Hydrogenation of α-Hydroxy Ketones: A Reaction Sensitive toward Electronic Effect of Substrates

以[RuCl2(benzene)]2 和 SunPhos为原料现场制备的催化剂,催化不对称氢化α-羟基酮类化合物可获得手性1, 2-二醇类化合物,ee值最高达99%。     

Development of a Continuous‐Flow System for Asymmetric Hydrogenation Using Self‐Supported Chiral Catalysts

Well‐designed, self‐assembled, metal–organic frameworks were constructed by simple mixing of multitopic MonoPhos‐based ligands ( 3 ; MonoPhos=chiral, monodentate phosphoramidites based on the 1,1′‐bi‐2‐naphthol platform) and [Rh(cod)₂]BF₄ (cod=cycloocta‐1,5‐diene). This self‐supporting strategy allowed for simple and efficient catalyst immobilization without the use of extra added support, giving well‐characterized, insoluble (in toluene) polymeric materials ( 4 ). The resulting self‐supported catalysts ( 4 ) showed outstanding catalytic performance for the asymmetric hydrogenation of a number of α‐dehydroamino acids ( 5 ) and 2‐aryl enamides ( 7 ) with enantiomeric excess (ee) ranges of 94–98 % and 90–98 %, respectively. The linker moiety in 4 influenced the reactivity significantly, albeit with slight impact on the enantioselectivity. Acquisition of reaction profiles under steady‐state conditions showed 4 h and 4 i to have the highest reactivity (turnover frequency (TOF)=95 and 97 h^?1 at 2 atm, respectively), whereas appropriate substrate/catalyst matching was needed for optimum chiral induction. The former was recycled 10 times without loss in ee (95–96 %), although a drop in TOF of approximately 20 % per cycle was observed. The estimation of effective catalytic sites in self‐supported catalyst 4 e was also carried out by isolation and hydrogenation of catalyst–substrate complex, showing about 37 % of the Rh^I centers in the self‐supported catalyst 4 e are accessible to substrate 5 c in the catalysis. A continuous flow reaction system using an activated C/ 4 h mixture as stationary‐phase catalyst for the asymmetric hydrogenation of 5 b was developed and run continuously for a total of 144 h with >99 % conversion and 96–97 % enantioselectivity. The total Rh leaching in the product solution is 1.7 % of that in original catalyst 4 h .     

Chloride‐Bridged Dinuclear Rhodium(III) Complexes Bearing Chiral Diphosphine Ligands: Catalyst Precursors for Asymmetric Hydrogenation of Simple Olefins

Efficient rhodium(III) catalysts were developed for asymmetric hydrogenation of simple olefins. A new series of chloride‐bridged dinuclear rhodium(III) complexes 1 were synthesized from the rhodium(I) precursor [RhCl(cod)]₂, chiral diphosphine ligands, and hydrochloric acid. Complexes from the series acted as efficient catalysts for asymmetric hydrogenation of (E)‐prop‐1‐ene‐1,2‐diyldibenzene and its derivatives without any directing groups, in sharp contrast to widely used rhodium(I) catalytic systems that require a directing group for high enantioselectivity. The catalytic system was applied to asymmetric hydrogenation of allylic alcohols, alkenylboranes, and unsaturated cyclic sulfones. Control experiments support the superiority of dinuclear rhodium(III) complexes 1 over typical rhodium(I) catalytic systems.     

Chiral Modification of Platinum by Co‐Adsorbed Cinchonidine and Trifluoroacetic Acid: Origin of Enhanced Stereocontrol in the Hydrogenation of Trifluoroacetophenone

Cinchonidine (CD) adsorbed onto a platinum metal catalyst leads to rate acceleration and induces strong stereocontrol in the asymmetric hydrogenation of trifluoroacetophenone. Addition of catalytic amounts of trifluoroacetic acid (TFA) significantly enhances the enantiomeric excess from 50 to 92 %. The origin of the enantioselectivity bestowed by co‐adsorbed CD and TFA is investigated by using in situ attenuated total reflection infrared spectroscopy and modulation excitation spectroscopy. Molecular interactions between the chiral modifier (CD), acid additive (TFA) and the trifluoro‐activated substrate at the solid–liquid interface are elucidated under conditions relevant to catalytic hydrogenations, that is, on a technical Pt/Al₂O₃ catalyst in the presence of H₂ and solvent. Monitoring of the unmodified and modified surface during the hydrogenation provides an insight into the phenomenon of rate enhancement and the crucial interactions of CD with the ketone, corresponding product alcohol, and TFA. Comparison of the diastereomeric interactions occurring on the modified surface and in the liquid solution shows a striking difference for the chiral preferences of CD. The spectroscopic data, in combination with calculations of molecular structures and energies, sheds light on the reaction mechanism of the heterogeneous asymmetric hydrogenation of trifluoromethyl ketones and the involvement of TFA in the diastereomeric intermediate surface complex: the quinuclidine N atom of the adsorbed CD forms an N?H?O‐type hydrogen‐bonding interaction not only with the trifluoro‐activated ketone but also with the corresponding alcohol and the acid additive. Strong evidence is provided that it is a monodentate acid/base adduct in which the carboxylate of TFA resides at the quinuclidine N‐atom of CD, which imparts a better stereochemical control.