Chemiluminescence determination of sulfite in sugar and of sulfur dioxide in air using the tris(2,2′-bipyridyl)ruthenium-KIO4 system

The chemiluminescence (CL) detection for the determination of sulfite using the reaction of Ru(bipy)₃ ²⁺(bipy=2,2′-bipyridyl)-SO₃ ^2–-KIO₄ is described. The concentration of sulfite is proportional to the CL intensity from 1.0 × 10^–7 to 1.0 × 10^–4 mol/L. The limit of detection is 2.0 × 10^–8 mol/L and the relative standard deviation is 4.4% for a 2 × 10^–5 mol/L sulfite solution (n = 9). This method has successfully been applied to the determination of sulfite in powdered sugar (sucrose) and of sulfur dioxide in air by using triethanolamine (TEA) as absorbent material.     

Determination of Albumin Using the Chemiluminescence of Tb3+/K2S2O8 System

A new chemiluminescence system of Tb³⁺/K₂S₂O₈ was developed for the determination of albumin. Some experimental conditions were examined and optimized. The linear ranges of the calibration curves are 5.0 × 10^?9–5.0 × 10^?6 mol/L for bovine serum albumin, 5.0 × 10^?8–1.0 × 10^?5 mol/L for human serum albumin and 2.5 × 10^?7–1.0 × 10^?5 mol/L for ovalbumin, and the corresponding detection limits are 1.9 × 10^?9 mol/L, 1.5 × 10^?8 mol/L, and 1.5 × 10^?7 mol/L, respectively. The method was applied to the determination of albumin in human serum samples, and the results were in agreement with those obtained by the bromcresol green method. The relative errors for the analytical results were from ?2.0% to 4.3%.     

Flow-Injection Chemiluminescence Determination of Fluoroquinolones

ABSTRACT

A new flow-injection CL method was developed for the determination of fluoroquinolones including ofloxacin, norfloxacin, ciprofloxacin and lomefloxacin in pharmaceutical preparations, based on the chemiluminescence reaction of sulphite with cerium(IV) sensitized by these compounds. The linear ranges are 0.04 to 4.0 μg ml^?1 for ofloxacin and 0.4 to 40.0 μg ml^?1 for norfloxacin, ciprofloxacin and lomefloxacin, respectively. The detection limits are 0.016 μg ml^?1 for ofloxacin and 0.16 μg ml ^?1 for norfloxacin, ciprofloxacin and lomefloxacin, respectively. The relative standard deviations (RSD) are 2.1 to 2.6% (n=10) for these fluoroquinolones. The analytical procedure has been applied to the determination of the fluoroquinolones in pharmaceutical commercial formulations. The results are in agreement with those obtained by the official methods.     

Determination of enoxacin and ofloxacin by capillary electrophoresis with electrochemiluminescence detection in biofluids and drugs and its application to pharmacokinetics

A novel and sensitive method for the simultaneous determination of enoxacin and ofloxacin has been established using capillary electrophoresis (CE) coupled with electrochemiluminescence (ECL) detection based on the ECL enhancement of tri(2,2‐bipyridyl)ruthenium(II). The conditions for sample solvent type, CE separation and ECL detection were investigated systematically. The analytes were well separated and detected within 7 min. The limits of detection (S/N = 3) of enoxacin and ofloxacin are 9.0 × 10^?9 and 1.6 × 10^?8 mol/L, respectively. The precisions (RSD%) of intraday and interday are less than 2.1 and 4.0%, respectively. The limits of quantitation (S/N = 10) of enoxacin and ofloxacin are 3.2 × 10^?7 and 5.4 × 10^?7 mol/L in human urine samples and 4.1 × 10^?7 and 6.9 × 10^?7 mol/L in human serum samples, respectively. The recoveries of enoxacin and ofloxacin at different concentration levels in human urine, serum and eye drop samples are between 94.0 and 106.7%. The proposed method was successfully applied to the determination of the enoxacin and ofloxacin in human urine, serum and eye drop samples and the monitoring of pharmacokinetics of ofloxacin in human body. Copyright © 2009 John Wiley & Sons, Ltd.     

Determination of Genistein by Flow‐injection Chemiluminescence Method Based on Ferricyanide Oxidation Sensitized by Rhodamine 6G

A novel flow injection chemiluminescence (FI‐CL) method for the determination of genistein was described. The method was based on the reaction between genistein and potassium ferricyanide in alkaline solution to give weak CL signal, which was dramatically enhanced by rhodamine 6G (Rh G). The CL emission allowed quantitation of genistein concentration in the range 1.0 × 10^?7–4.0 × 10^?5 mol/L with a detection limit (3σ) of 4.2 × 10^?8 mol/L. The relative standard deviation for 11 parallel measurements of 5.0 × 10^?7 mol/L, 4.0 × 10^?6 mol/L and 1.0 × 10^?5 mol/L genistein were 2.59%, 2.40% and 1.48%, respectively. The experimental conditions for the CL reaction were optimized and the possible reaction mechanism was discussed. The method was applied to the determination of genistein in biological fluids.     

Determination of Tryptophan in Pharmaceutical Formulations Using a Sequential Injection–Zone Fluidic–Chemiluminescence Tubular Reactor

Tryptophan is an important amino acid for humans with a significant role in cell metabolism. Depletion of tryptophan in the human body may contribute to diseases and development of disorders among the human population. It is, therefore, very important to have a reliable, stable, sustainable, and cost-effective analytical method for the determination of tryptophan. Tryptophan was determined using sequential injection–zone fluidics analysis with luminol–hydrogen peroxide and the Firefly with its unique liquid core waveguide flow-cell design as chemiluminescence tubular reactor with a high-sensitivity photomultiplier tube. This was based on an intense chemiluminescence formation of tryptophan in luminol–hydrogen peroxide inside the tubular reactor for measurement. The chemiluminescence intensity was linear with tryptophan in the range of 1.0?×?10^?6 to 1.0?×?10^?3?mol/L, and the limit of detection was 7.5?×?10^?7?mol/L. The precision for the method was 3.6% (relative standard deviation) for six measurements of 1.0?×?10^?4?mol/L tryptophan. The proposed method has been used to determine tryptophan in pharmaceutical formulations. The system is relatively fast for online assays. Eighty seconds are required to complete one cycle providing a throughput of 45 samples/h. The proposed sequential injection analysis–zone fluidics–chemiluminescence system for the assay of tryptophan in certain specific pharmaceutical capsules is simple, reliable, sustainable, and convenient with relatively low-cost consumption of reagents.     

A Novel Enhanced Chemiluminescence System with Ag(III) Complex for the Determination of Ofloxacin and Levofloxacin in Pharmaceutical Preparation and Biological Fluid

A novel chemiluminescence (CL) method is developed for determination of ofloxacin and levofloxacin with Ag(III) complex in H₂SO₄ solution medium. The CL intensity is proportional to drug concentration in a wider range with a correlation coefficient of 0.999. The limit of detection (s/n = 3) for ofloxacin and levofloxacin was 5.3 × 10^?9 g ml^?1 and 8.3 × 10^?9 g ml^?1, respectively, and their recoveries from urine and serum samples were in the range of 90.1–112% with the RSDs of 1.0–2.8%. The proposed method was applied for analysis of real samples with satisfactory result. The possible CL mechanism was discussed.     

Flow-injection enhanced chemiluminescence method for determination of ciprofloxacin in pharmaceutical preparations and biological fluids

A novel rapid and sensitive analytical method, enhanced chemiluminescence with flow-injection sampling, is described for determination of ciprofloxacin. The method is based on the chemiluminescence reaction of the potassium permanganate–sodium thiosulfate–ciprofloxacin system. An enhanced chemiluminescence reaction was developed, and optimum conditions for CL emission were investigated. The chemiluminescence intensity was linearly dependent on ciprofloxacin concentration in the range 1.0×10⁻⁸–1.0×10⁻⁵ g mL⁻¹. The detection limit was 4×10⁻⁹ g mL⁻¹. The relative standard deviation was 1.8% for eleven measurements of 2.0×10⁻⁷ g mL⁻¹ ciprofloxacin standard solution. The new method enables simple, sensitive, and rapid determination of ciprofloxacin and has been successfully used for determination of ciprofloxacin in biological fluids and in ciprofloxacin hydrochloride tablet and injection.     

Determination of trace silver in waste water by 9,10-dimethylacridinium fluorosulfonate-K2S2O8 chemiluminescence system

A new highly sensitive method for determination of trace silver in waste water with 9,10-dimethylacridinium fluorosulfonate (DAFA)-K₂S₂O₈ system was suggested. In the basic aqueous solution, trace of silver (I) showed strongly catalytic effect on the chemiluminescence system with the presence of 2,2′-bipyridine. The range of the linear relationship between light intensity and concentration of silver (I) is 1.0 × 10³ mol / L to 6.0 × 10³ mol / L. The detection limit is 8.0 × 10³ mol / L, and the RSD for 5.0 × 10³ mol / L Ag (I) is 6.5% (n=13). In the existence of potassium fluoride, the selectivity is higher. Combining the treatment with nitric acid, the method is applied to determine some environmental waste water and the results are similar to atomic absorption spectroscopy.     

Electrochemical behaviors of ofloxacin and its voltammetric determination at carbon nanotubes film modified electrode

A multi-wall carbon nanotubes (MWNTs)-Nafion film-coated glassy carbon electrode (GCE) was fabricated and the electrochemical behavior of ofloxacin on the MWNTs-Nafion film-coated GCE were investigated by cyclic voltammetry (CV), linear sweep voltammetry (LSV) and electrochemical impedance spectroscopy (EIS). The oxidation peak current of ofloxacin increased significantly on the MWNTs-Nafion film modified GCE compared with that using a bare GCE. This nano-structured film electrode exhibited excellent enhancement effects on the electrochemical oxidation of ofloxacin. A well-defined oxidation peak attributed to ofloxacin was observed at 0.97 V and was applied to the determination of ofloxacin. The oxidation peak current was proportional to ofloxacin concentration in the ranges 1.0 × 10⁻⁸ to 1.0 × 10⁻⁶ mol/L and 1.0 × 10⁻⁶ to 2.0 × 10⁻⁵ mol/L. A detection limit of 8.0 × 10⁻⁹ mol/L was obtained for 400 s accumulation at open circuit (S/N = 3). This method for the detection of ofloxacin in human urine was satisfactory. __________ Translated from Chinese Journal of Applied Chemistry, 2007, 24(5): 540–545 [译自: 应用化学]     

Determination of Diammonium Glycyrrhizinate and Its Antioxidant Activity Using a Novel Chemiluminescence System

A novel chemiluminescence (CL) system was established for the determination of diammonium glycyrrhizinate (DG) in pharmaceutical preparations and its ability of scavenging hydroxyl radical. It was shown that a strong CL signal was observed when Eosin Y mixed with Fenton reagent. The CL intensity was decreased significantly when DG was added to the reaction system and partially scavenged the hydroxyl radicals in the solution. The extent of decrease in the CL intensity had a good stoichiometrical relationship with DG concentration. Based on this, we developed a new method for the determination of DG using a flow injection chemiluminescence (FI-CL) technique. Under the optimal conditions, the linear range of DG concentration was 6.0 × 10^?8–5.0 × 10^?6 mol/L (R = 0.9982) with a detection limit of 8.0 × 10^?9 mol/L (SN = 3), and the RSD was 3.8% for 2.0 × 10^?7 mol/L DG (n = 11). This method was successfully used in the determination of DG in tablets and the evaluation of hydroxyl radical scavenging capacity of DG. The possible reaction mechanism of the CL system is discussed.     

Fluorimetric determination of methylmercury as an ion-association complex with rhodamine B in the presence of iodide

A fluorimetric method for the determination of methylmercury was established. The method was based on the formation of an ionic pair between iodide-methylmercury-rhodamine B in hydrochloric acid, which can be extracted with benzene. The fluorescence emission was measured at λ_ex/λ_em 575/590 nm, and the experimental variables and possible interference were studied. The linear calibration range was 4 × 10^–8 mol/L ～ 5 × 10^–7 mol/L with a correlation coefficient of 0.9992. The detection limit was 1 × 10^–8 mol/L. The method was used to determine methylmercury in human hair. The recovery was in the range of 91% to 105% and the relative standard deviation was 2.8%. The results agreed with those obtained by gas chromatography with electron capture detection.     

Multiresidue determination of eleven quinolones in milk by liquid chromatography with fluorescence detection

A liquid chromatographic method with fluorescence detection was developed for simultaneous determination of norfloxacin, ofloxacin, ciprofloxacin, pefloxacin, lomefloxacin, danofloxacin, enrofloxacin, sarafloxacin, difloxacin, oxolinic acid, and flumequine in milk The samples were extracted with 10% trichloroacetic acid/acetonitrile (9 + 1, v/v) and cleaned by Strata-X reversed-phase solid-phase extraction cartridges. The 11 quinolones were separated on a reversed-phase C18 column (Hypersil BDS-C18) with mobile phase gradient elution and detected with fluorescence by means of a wavelength program. The recoveries for milk fortified with the 11 quinolones at 3 levels were 69-88% with acceptable relative standard deviations of <9% (intraday) and <14% (interday). The limits of detection were 23 microg/L for enrofloxacin, and 1-9 microg/L for the other 10 quinolones.     

Flow-injection chemiluminescence determination of fluoroquinolones by enhancement of weak chemiluminescence from peroxynitrous acid

A flow-injection chemiluminescence (CL) method is described for the determination of fluoroquinolones including ciprofloxacin, norfloxacin and ofloxacin. The method is based on the enhancement by these compounds of the weak CL from peroxynitrous acid. The linear ranges are 1.0×10⁻⁷ to 1.0×10⁻⁵ mol l⁻¹ for ciprofloxacin and norfloxacin, and 3.0×10⁻⁷ to 3.0×10⁻⁵ mol l⁻¹ for ofloxacin, respectively. The detection limits (S/N=3) are 4.5×10⁻⁸ mol l⁻¹ ciprofloxacin, 5.9×10⁻⁸ mol l⁻¹ norfloxacin and 1.1×10⁻⁷ mol l⁻¹ ofloxacin, respectively. The proposed method was applied to the determination of fluoroquinolones in pharmaceutical preparations.     

Amperometric detection studies of Nafion/indium hexacyanoferrate film for the determination of electroinactive cations in ion chromatography

An amperometric detector based on the chemical modification of Nafion and indium (III) hexacyanoferrate (II, III) thin film (Nafion/In-CN-Fe) onto a glassy carbon (GC) electrode, was first successfully used for the determination of electroinactive cations (Li⁺, Na⁺, K⁺, Rb⁺, Cs⁺, NH₄ ⁺) in single column ion chromatography (IC). A set of well-defined peaks of electroinactive cations was obtained. The detection limits of the cations are 8.9 × 10^–6 mol/L for Li⁺, 2.3 × 10^–6 mol/L for Na⁺, 5.2 × 10^–6 mol/L for K⁺, 4.8 × 10^–6 mol/L for Rb⁺, 4.0 ׶10^–6 mol/L for Cs⁺ and 5.3 × 10^–6 mol/L for NH₄ ⁺ at a single-to-noise ratio of 3. The proposed method was quick, sensitive and simple. The cations in rainwater and mineral water were successfully analyzed by this method.     

Chemiluminescence determination of fluoroquinolones using Fenton system in the presence of terbium(iii) ions

A simple new chemiluminescent, CL, method is described for the determination of fluoroquinolones such as: ciprofloxacin (CF), norfloxacin (NF), and ofloxacin (OF). This method is based on the measurement of terbium(iii) emission. This emission follows an energy transfer to the uncomplexed terbium(iii) ions from the excited products of fluoroquinolone oxidations. Under optimum conditions, calibration graphs were obtained for 2 × 10(-8)-2 × 10(-6) mol L(-1) of NF; 3 × 10(-8)-2 × 10(-6) mol L(-1) of CF and 4 × 10(-7)-5 × 10(-5) mol L(-1) of OF. The detection limits are 7 × 10(-9) mol L(-1) norfloxacin, 1 × 10(-8) mol L(-1) ciprofloxacin and 1.5 × 10(-7) mol L(-1) ofloxacin. The method was successfully applied to the determination of these drugs in pharmaceutical formulations.     

Determination of resveratrol in red wine by solid phase extraction-flow injection chemiluminescence method

A sensitive flow injection chemiluminescence method has been developed for the detection of resveratrol in red wine based on the fact that resveratrol can greatly enhance chemiluminescence reaction between KMnO_4 and HCHO in sulfuric acid medium. Analytes were pre-concentrated on solid sorbents (C_(18) solid-phase extraction cartridges).Under the optimum conditions,the proposed method allows the measurement of resveratrol over the range of 1.32×10~(-8) to 1.32×10~(-5) mol/L with a detection limit of 3.30×10~(-9) mol/L,and the relative standard deviation for 1.32×10~(-5) mol/L resveratrol (n=11) is 3.8%.This method has been successfully applied for the determination of the resveratrol in red wine.Furthermore,the possible reaction mechanism was also discussed.     

A Novel Fluorescent Reagent for Analysis of Hydrogen Peroxide

IntroductionTheoxidationofmanyclinicalsubstancesinbodyfluidsproducesaquantityofhydrogenperoxide ,sothedetermina tionoftracehydrogenperoxideisofconsiderableimportanceinclinicalchemistry .1Further,themonitoringofhydrogenperoxideisalsonecessarytoenvironmentalsciencesinceitisakeyspeciesinthereactionsofthetroposphere,beingin volvedinimportantreactionssuchasthecatalyzedoruncat alyzedaqueousphaseoxidationofSO2 andtheultraviolet en hancedaqueousphaseoxidationoforganicspecies.2 Uptonow ,variousmethods…     

Chemiluminescence flow system for the determination of sulfite

A novel chemiluminescence(CL) flow system for sulfite is described based on electrostatically immobilized luminol on an anion exchange column. Sulfite is detected by the CL reaction with luminol bleeding from the column by hydrolysis. The calibration graph is linear in the range 3 × 10^–7 to 1 × 10^–5 mol/L, and the detection limit is 1 × 10^–7 mol/L. Interfering metal ions co-existing in sample solutions could be effectively eliminated on-line by an upstream cation exchanger. A complete analysis could be performed in 1 min with a relative standard deviation of less than 5%. The system could be reused for over 50 h and has been applied successfully to the determination of sulfur dioxide in air.     

Determination of idarubicin in human urine by capillary zone electrophoresis with amperometric detection

A simple, reliable and reproducible method, based on capillary zone electrophoresis with amperometric detection, has been developed for the determination of idarubicin in human urine. A carbon disk electrode was used as working electrode. The optimal conditions of separation and detection were pH 5.6 phosphate buffer ¶(0.20 mol/L), 22 kV for the separation voltage and 1.00 V (vs. Ag/AgCl, 3 mol/L KCl) for the detection potential. The linear range was from 4.0 × 10^–7 to 2.0 × 10^–5 mol/L with a regression coefficient of 0.9986, and the detection limit was 8.0 × 10^–8 mol/L. The method was directly applied to the determination of idarubicin in spiked human urine without any other sample pretreatment except filtration, and the assay results were satisfactory.