超支化聚酰胺-胺破乳剂的合成及应用

以N-丙烯酰-1,2-乙二胺盐酸盐(ADE)合成为基础,通过ADE的Michael加成反应制备阳离子超支化聚合物聚N-丙烯酰-1,2-乙二胺盐酸盐(HADE),并对其结构进行了表征。研究表明,50℃下,HADE破乳剂(质量浓度为200 mg/L)对含煤油质量分数5%的水包油(O/W)煤油乳液的除油率可高达95.6%,显示了产品在乳液破乳除油方面良好的发展前景。     

N-二茂铁甲基丁胺的合成

以二茂铁甲醛和正丁胺为原料,经缩合、还原反应制得N-二茂铁甲基丁胺。采用连续操作的方法,用正交实验确定了反应的最佳条件:二茂铁甲醛10 mmol,n(FcCHO)∶n(n-C4H9NH2)∶n(KBH4)=1.0∶1.4∶1.4;于(65±2)℃缩合反应6 h;于(55±2)℃还原反应8 h,产率可达77.8%。在最佳条件下实验规模放大50倍,收率达80.5%,纯度达99.5%。     

水溶性羟基丙烯酸酯树脂的合成

以氧化苯甲酰为引发剂,通过溶液聚合合成了水溶性丙烯酸丁酯-甲基丙烯酸甲酯-丙烯酸-甲基丙烯酸羟乙酯四元共聚物,其结构经~1H NMR,~(13)C NMR和IR表征,热分析结果表明其分解温度为360 ℃～440 ℃.     

一种两性三元共聚物的合成

选用聚乙二醇二丙烯酸酯(PEGDA)为扩链剂,以丙烯酰胺(AM)、2-甲基-2-丙烯酰胺基丙磺酸(AMPS)、甲基丙烯酰氧乙基三甲基氯化铵(DMC)为主单体,采用水溶液聚合方法合成了两性三元共聚物AM/AMPS/DMC;测定了共聚物的性能,并利用红外光谱研究了其分子结构.结果表明,所合成的共聚物具有良好的耐酸和高温稳定性,以及高抗剪切率.     

Magnetically Recoverable Efficient Demulsifier for Water‐in‐Oil Emulsions

A magnetically recoverable and efficient demulsifier is shown to demulsify surfactant‐stable water‐in‐oil emulsions rapidly. Ferroferric oxide (Fe₃O₄) particles are firstly coated by amorphous silicon dioxide (SiO₂), and further functionalized with a commercial dodecyltrimethoxysilane solution (KH‐1231). Owing to their paramagnetic properties, the demulsifier particles can be easily recovered with a magnet. Upon addition of demulsifier to emulsions and subsequent sonification, the supernatant becomes completely transparent and no droplets are observed in the micrographs. It was also demonstrated that this demulsifier is effective for emulsions prepared with a variety of oils. Moreover, magnetically recovered demulsifier can be recycled after simple treatment without any decline of efficiency. This work presents a feasible approach for demulsifying water‐in‐oil emulsions, and has potential value in industry.     

Synthesis and properties of styrenetricarbonylchromium and its analogs

The methods of synthesis and the reactivity of styrenetricarbonylchromium and its analogs as model objects for the study of the effect of the metal atom on the reactivity of the monomer -bond and the aromatic ring are described systematically and discussed. These compounds are unique initial substrates for the synthesis of metal-containing polymers and for the preparation of optical stereoisomers and materials for nonlinear optics.     

Synthesis and Aggregation Behavior of Multi‐Responsive Double Hydrophilic ABC Miktoarm Star Terpolymer

We report the first example of the synthesis and the “schizophrenic” micellization behavior of a multi‐responsive double hydrophilic ABC miktoarm star terpolymer. A well‐defined miktoarm star terpolymer consisting of poly(ethylene glycol), poly(2‐(diethylamino)ethyl methacrylate), and poly(N‐isopropylacrylamide) arms, PEG(‐b‐PDEA)‐b‐PNIPAM, was synthesized via the combination of atom transfer radical polymerization (ATRP) and click reaction. Containing pH‐responsive PDEA and thermo‐responsive PNIPAM arms, this novel type of miktoarm star terpolymer molecularly dissolves in aqueous solution at acidic pH and room temperature, but supramolecularly self‐assembles into PDEA‐core micelles at alkaline pH and room temperature, and PNIPAM‐core micelles at acidic pH and elevated temperatures. Most importantly, both types of micellar aggregates possess well‐solvated hybrid coronas.

     

新型高效原油破乳剂PNT-05的研制与应用

针对中原油田采油六厂二区原油破乳脱水过程中存在的脱水速度慢,乳化中间层厚等问题,通过分子结构设计手段,在非离子型破乳剂基础上,经酯化,在破乳剂分子中引入阳离子基团,合成出季胺盐阳离子型破乳剂PNT－05,利用季胺盐阳离子型破乳剂与助剂复配的方法室内解决了中原油田二区原油破乳脱水过程中顾在的问题,与油田现场用破乳剂相比,新的破乳剂体系脱水速度快,脱水效率高,使乳化中间层变薄或消失,同时探讨了季胺盐阳离子型破乳剂PNT－05的作用机制。     

Templateless Synthesis of Polyacrylamide‐Based Nanogels via RAFT Dispersion Polymerization

This paper reports on the synthesis of well‐defined polyacrylamide‐based nanogels via reversible addition–fragmentation chain transfer (RAFT) dispersion polymerization, highlighting a templateless route for the efficient synthesis of nanogels based on water‐soluble polymers. RAFT dispersion polymerization of acrylamide in co‐nonsolvents of water–tert‐butanol mixtures by chain extension from poly(dimethylacrylamide) shows well‐controlled polymerization process, uniform nanogel size, and excellent colloidal stability. The versatility of this approach is further demonstrated by introducing a hydrophobic co‐monomer (butyl acrylate) without disturbing the dispersion polymerization process.

     

Synthesis and application of pendant phenyl cyclopentadienyl lanthanide chlorides as catalyst precursors for methyl methacrylate polymerization

The synthesis and characterization of a series of new pendant phenyl substituted cyclopentadienyl lanthanide chlorides are reported. The analytical data of 3a–3e point to the formation of monomeric and unsolvated complexes, (PhCMe₂C₅H₄)₂LnCl (Ln = Er (3a), Sm (3b), Gd (3c), Y (3d), Nd (3e)); and the analytical data of 4a–4d point to the formation of the dimeric and unsolvated complexes, [(PhCH₂CMe₂C₅H₄)₂LnCl]₂ (Ln = Gd (4a), Y (4b), Sm (4c), Er (4d)). The X‐ray crystallographic structure of 4d indicates that the pendant phenyl substituent is not coordinated to the central metal. The nine complexes are efficient catalysts for the polymerization of methyl methacrylate in conjunction with Al(Et)₃ or NaH. As NaH was used as a new co‐catalyst, the catalytic systems show highly catalytic activity at room temperature. In the [(PhCH₂CMe₂C₅H₄)₂ErCl]₂/Al(Et)₃ catalyst system, the effects of the concentration of catalyst, and the temperature and time of polymerization were studied. Copyright © 2004 John Wiley & Sons, Ltd.     

Non‐Ideal Polymerization Kinetics of a Cationic Double Charged Acryl Monomer and Solution Behavior of the Resulting Polyelectrolytes

The radical polymerization of bis‐1,3(N,N,N‐trimethylammonium)‐2‐propylmethacrylate dichloride revealed non‐ideality with 0.59 and 4.4 for the reaction orders of the initiator and monomer concentration, respectively. Further, autoacceleration was observed from less than 10% conversion onwards. Degradative chain transfer to the monomer was concluded to explain the initiator exponent. Monomer association and electrostatic effects are hypothesized to govern the monomer exponent and autoacceleration. The exponential concentration dependent increase of the viscosity of the monomer solution and the relatively low overall activation energy E_a = 31.5 kJ · mol⁻¹ support the hypothesis. Counterion activity measurements confirmed strong counterion condensation as expected for a charge distance of 0.12 nm.

     

"一锅法"合成5-甲基-4-甲酰基-己腈

以异戊醛,吗啉和丙烯腈为原料,用一锅法合成了5-甲基-4-甲酰基-己腈.通过正交试验确定了最佳的反应条件异戊醛0.1 mol,n(异戊醛)n(吗啉)n(丙烯腈)＝1.01.21.4;溶剂[V(甲醇)V(水)＝182]200 mL·mol-1(以烯胺计),于70 ℃反应15 h(第2步),产率96.06%,产物易分离和纯化.     

Synthesis and properties of poly(isobutyl methacrylate‐co‐butanediol dimethacrylate‐co‐methacryl polyhedral oligomeric silsesquioxane) nanocomposites

Poly[isobutyl methacrylate‐co‐butanediol dimethacrylate‐co‐3‐methacrylylpropylheptaisobutyl‐T8‐polyhedral oligomeric silsesquioxane] [P(iBMA‐co‐BDMA‐co‐MA‐POSS)] nanocomposites with different crosslink densities and different polyhedral oligomeric silsesquioxane (MA‐POSS) percentages (5, 10, 15, 20, and 30 wt %) were synthesized by radical‐initiated terpolymerization. Linear [P(iBMA‐co‐MA‐POSS)] copolymers were also prepared. The viscoelastic properties and morphologies were studied by dynamic mechanical thermal analysis, confocal microscopy, and transmission electron microscopy (TEM). The viscoelastic properties depended on the crosslink density. The dependence of viscoelastic properties on MA‐POSS content at a low BDMA loading (1 wt %) was similar to that of linear P(iBMA‐co‐MA‐POSS) copolymers. P(iBMA‐co‐1 wt % BDMA‐co‐10 wt % MA‐POSS) exhibited the highest dynamic storage modulus (E′) values in the rubbery region of this series. The 30 wt % MA‐POSS nanocomposites with 1 wt % BDMA exhibited the lowest E′. However, the E′ values in the rubbery region for P(iBMA‐co‐3 wt % BDMA‐co‐MA‐POSS) nanocomposites with 15 and 30 wt % MA‐POSS were higher than those of the parent P(iBMA‐co‐3 wt % BDMA) resin. MA‐POSS raised the E′ values of all P(iBMA‐co‐ 5 wt % BDMA‐co‐MA‐POSS) nanocomposites in the rubbery region above those of P(iBMA‐co‐5 wt % BDMA), but MA‐POSS loadings < 15 wt % had little influence on glass‐transition temperatures (T_g's) and slightly reduced T_g values with 20 or 30 wt % POSS. Heating history had little influence on viscoelastic properties. No POSS aggregates were observed for the P(iBMA‐co‐1 wt % BDMA‐co‐MA‐POSS) nanocomposites by TEM. POSS‐rich particles with diameters of several micrometers were present in the nanocomposites with 3 or 5 wt % BDMA. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 355–372, 2005     

1-[3’-(6’-苯甲酰基-N-烯丙基咔唑)]-1-丁酮肟-O-乙酸酯的合成和光引发性能

以N－烯丙基咔唑为原料,经Fridel-Crafts酰化反应、成肟和酯化,得到目标化合物。通过正交试验研究了关键步骤Fridel-Crafts酰化,得到最佳反应条件：N-烯丙基咔唑用量为0.020mol,催化剂与原料摩尔比1.10,反应物摩尔比1.15, 25℃下反应4h,产率可达94.2%。目标产物的结构通过IR,UV, 1H NMR和元素分析进行表征。并初步测试其光引发性能。     

Poly(styrene‐co‐glycerol dimethacrylate): Synthesis,characterization, and application as a resin for gel‐phase peptide synthesis

An efficient cross‐linked polymer support for solid‐phase synthesis was prepared by introducing glycerol dimethacrylate cross‐linker to polystyrene network using free radical aqueous suspension polymerization. The support was characterized by various spectroscopic methods. Morphological feature of the resin was analyzed by microscopy. The polymerization reaction was investigated with respect to the effect of amount of cross‐linking agent, which in turn vary the swelling, loading, and the mechanical stability of the resin. The solvent uptake of the polymer was studied in relation to cross‐linking and compared with Merrifield resin. The stability of the resin was tested in different synthetic conditions used for solid‐phase peptide synthesis. Hydroxy group of the support was derivatized to chloro and then amino groups using different reagents and reaction conditions. Efficiency of the support was tested and compared with TentaGel? resin by following different steps involved in the synthesis of the 65–74 fragment of acyl carrier protein. The results showed that the poly(styrene‐co‐glycerol dimethacrylate) (GDMA‐PS) is equally efficient as TentaGel resin in peptide synthesis. The purity of the peptides was analyzed by HPLC and identities were determined by mass spectroscopy and amino acid analysis. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4382–4392, 2005     

First Example of Schiff Bases Containing Poly(Acryl Amid) in the Synthesis and Characterization

A novel polymeric‐Schiff base derived from the condensation reaction poly(acryl amid) and indole‐3‐carboxaldehyde has been synthesized and their Co(II) and Ni(II) complexes have been prepared. Mol ratio of acrylamid group and Schiff bases group was estimated by means of height of ‐CH multiple peaks and –CH=N‐ peak in ¹H‐NMR spectrum. The studied substances were characterized by molar conductance, magnetic susceptibility, electronic and IR spectral studies. In addition, main units have been suggested with elemental analysis for these substances, and than the weight average molecular weight (M_w) has been suggested. The number average molecular weight (M_n) was determined with a vapor pressure osmometer. Polydispersity index (PDI) found to be ca 1.7 from M_w/M_n for poly‐Schiff bases and their Co(II) and Ni(II) complexes. PAA‐Schiff bases were found to have the highest thermal stablility compared to that of the Co(II) and Ni(II) complexes. The conductivities of the PAA‐Schiff bases and their complexes were measured by the four‐probe technique and were found in the range 10^?5?10^?6 S cm^?1.     

[4-(对苯甲酰基苯硫基)苯]苯基碘鎓六氟磷酸盐的合成

碘鎓盐;光引发剂;合成;正交试验;光引发性能     

Synthesis,characterization, and photocuring of siloxane‐oxirane monomers

The aim of this study was to synthesize, characterize, and evaluate alternative monomers for use in dentistry. Three siloxane‐oxirane low‐shrinkage monomers were synthesized, and the products’ conversion was followed by Fourier transform ‐ infrared spectroscopy. The products obtained were characterized by ¹H and ¹³C NMR and evaluated for viscosity and a refractive index. The polymerization was evaluated by formulating two experimental photoinitiation systems, which varied for the presence of 1,2 ethanediol. A ternary system with camphorquinone (CQ), ethyl 4‐dimethylaminobenzoate (EDAB), and diphenyliodonium hexafluorphosphate (DPI) was used as control. The degree of conversion was assessed by differential scanning calorimetry (DSC). The NMR confirmed the synthesis success with 75, 87, and 55% yields for the monomers synthesized. The viscosity and the refractive index of the monomers showed favorable rheological and physical behaviors for application in dentistry. Moreover, the presence of 1,2 ‐ ethanediol increased the degree of conversion of the siloxane‐oxirane monomers. This study showed a simple and effective way to synthesize siloxane‐oxirane monomers with a high potential for application in dental materials. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1728–1733     

高吸油性树脂的合成方法及性能研究

采用悬浮聚合法 ,以水为分散相 ,DVB为交联剂 ,BPO为引发剂 ,以价格低廉的苯乙烯、甲基丙烯酸甲酯、丙烯酸甲酯及α-烯烃为共聚单体 ,合成了低交联度的聚甲基丙烯酸甲酯及聚苯乙烯等三个系列的高吸油性树脂 .侧重研究了α -烯烃碳链的长短不同以及含量的不同 ,对高吸油性树脂性能的影响 .其中对甲苯的吸油率可达 15 .0g/g .     

Novel biodegradable adaptive hydrogels: controlled synthesis and full characterization of the amphiphilic co-networks

Adaptive and amphiphilic poly(N,N-dimethylamino-2-ethyl methacrylate-graft-poly[epsilon-caprolactone]) co-networks (netP(DMAEMA-g-PCL)) were synthesized from a combination of controlled polymerization techniques. Firstly, PCL cross-linkers were produced by ring-opening polymerization (ROP) of epsilon-CL initiated by 1,4-butane-diol and catalyzed by tin(II) 2-ethylhexanoate ([Sn(Oct)2]), followed by the quantitative esterification reaction of terminal hydroxyl end-groups with methacrylic anhydride. Then, PCL cross-linkers were copolymerized to DMAEMA monomers by atom-transfer radical polymerization (ATRP) in THF at 60 degrees C using CuBr complexed by 1,1,4,7,10,10-hexamethyltriethylenetetramine (HMTETA) and 2-ethyl isobutyrylbromide (EiBBr) as catalytic complex and initiator, respectively. A comprehensive study of gel formation was carried out by employing dynamic light scattering (DLS) to determine the gel point as a function of several parameters and to characterize the viscous solutions obtained before the gel point was reached. The evolution of the mean diameters was compared to a model previously developed by Fukuda and these attest to the living formation of the polymer co-network. Furthermore, we also demonstrated the reliability of ATRP for producing well-defined and homogeneous polymer co-networks by the smaller deviation from Flory's theory in terms of cross-linking density. For sake of clarity, the impact of polymerization techniques over the final structure and, therefore, properties was highlighted by comparing two samples of similar composition, but that were produced by either ATRP or thermal-initiated free-radical polymerization (FRP).