One‐component photoinitiator based on benzophenone and sesamol

A new benzodioxole derivative, 4‐(1,3‐benzodioxol‐5‐yloxy) benzophenone (BPBDO), based on benzophenone and sesamol was precisely synthesized, and it can be used as a 1‐component type II photoinitiator. Elementary analysis, atmospheric pressure chemical ionization mass spectrometry, ¹H nuclear magnetic resonance, and ¹³C nuclear magnetic resonance studies revealed that the molecular structure of BPBDO consisted of both benzophenone (BP) and benzodioxole (BDO) structures. The laser flash photolysis experiments and electron spin resonance test indicated that the process of radicals generated from BPBDO after irradiation was similar to 3 processes of ethyl 4‐dimethylaminobenzoate and BP. The kinetics of photopolymerization of the photoinitiator was also studied by real‐time infrared spectroscopy. The oxygen content, light intensity, and viscosity of the monomer affected the decomposition (R_d) and polymerization rate, and the final double bond conversion was also studied. All the results suggest that BPBDO is a 1‐component photoinitiator that is an efficient photoinitiator for free radical polymerization. In contrast to typical dual‐component photoinitiators, eg, BP/ethyl 4‐dimethylaminobenzoate or BP/BDO, BPBDO does not require an additional amine coinitiator for the initiation and is applicable in nonamine resin systems.     

Synthesis and characterization of copolymerizable one‐component type II photoinitiator

A copolymerizable one‐component Type II photoinitiator (CMEBP), based on 4‐hydroxybenzophenone (HBP), epichlorohydrin, morpholine, and acryloyl chloride, was synthesized and its structure was confirmed by ¹H‐NMR. The properties of CMEBP were investigated with UV spectroscopy and photo‐differential scanning calorimetry (photo‐DSC). The maximum of UV absorption red‐shifted significantly compared to benzophenone (BP). Photopolymerization results of tripropylene glycol diacrylate (TPGDA) indicated that CMEBP had larger maximum rate of polymerization than that of BP/triethanolamine (TEOHA) and HBP/triethylamine (TEA), larger final double bond conversion than that of HBP/TEA, but lower than that of BP/TEOHA. The rate of polymerization, final conversion increased and the induction period shortened with increase in CMEBP concentration. Copyright © 2008 John Wiley & Sons, Ltd.     

Synthesis and photopolymerization kinetics of multifunctional aromatic urethane acrylates containing tertiary amine group

Two multifunctional aromatic urethane acrylates, based on 2, 4‐toluene diisocyanate (2, 4‐TDI), β‐hydroxyethyl arcylate (HEA), and synthetic multifunctional hydroxyl compounds, were synthesized by classical condensation reaction. FTIR was used to monitor the process of the reaction. The photopolymerization kinetics of the urethane acrylates with different photoinitiators was studied by Real‐Time Infrared Spectroscopy. The results indicated that different from the commercial urethane acrylate CN 975, the synthetic multifunctional urethane acrylates could be efficiently initiated by BP without the addition of any co‐initiators as they have tertiary amine structures. Copyright © 2008 John Wiley & Sons, Ltd.     

One‐component,double‐chromophoric thioxanthone photoinitiators for free radical polymerization

Two one‐component, double‐chromophoric thioxanthone photoinitiators, namely TX‐EDA and TX‐DETA were synthesized by the reaction of thioxanthone aldehyde (TX‐A) with ethylenediamine (EDA) and diethylenetriamine (DETA), respectively via a facile Schiff base reaction. Both photoinitiators were characterized by spectral analysis and photobleaching studies. DFT calculations are employed to reveal the contribution of the different orbitals to the excitation of the initiators. The double‐chromophoric nature of the initiators gives rise to an increased absorption in the near UV region when compared with the pristine TX‐A. Photoinitiated polymerization of various vinyl monomers with TX‐EDA and TX‐DETA has been investigated in the presence and absence of a co‐initiator and compared for formulations consisting of precursor TX‐A. In addition, real‐time FTIR spectroscopic studies were performed in methyl methacrylate polymerization with both initiators. The higher efficiency observed with TX‐DETA may be attributed to the additional hydrogen donating sites adjacent to nitrogen atoms. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3475–3482     

Relevance of linked dye‐coinitiator in visible three‐component photoinitiating systems: Application to red light photopolymerization

A new visible light photoinitiating system (PIS) containing a linked dye‐coinitiator dyad and a nondissociative electron donor was evaluated and compared with unlinked three components systems. Our results show that in the physical mixture of the three component PIS, addition of the nondissociative donor decreased the Rp to a great extent, whereas in combination with the dyads an increase in Rp is observed. The results were explained based on faster intramolecular electron transfer in linked pairs and point out the importance of linked initiator in three‐component PIS for the first time. This system is the first example of three‐components system with a nondissociative donor that would be useful for long life coating formulation. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 4325–4330     

Synthesis and photopolymerization kinetics of lower odor benzophenone derivative photoinitiators

Seven lower odor benzophenone (BP) derivatives (2a, 2b, 2c, 2d, 3a, 3b, 3c) based on 4‐hydroxybenzophenone(1) were synthesized and characterized by ¹H NMR, Mass, UV–Vis absorption spectroscopy. electron spin resonance (ESR) spectroscopy was carried out to research the photopolymerization mechanism. The kinetics of photopolymerization was studied by differential scanning photocalorimetry (photo‐DSC). The results showed that 2a–d with uni‐BP moiety were more effective photoinitiators (PIs) than 3a–c with bi‐BP moieties, and 2c was the most effective one which could be a promising candidate for BP alternative in practical application. Copyright © 2009 John Wiley & Sons, Ltd.     

Novel PU‐type polymeric photoinitiator comprising side‐chain benzophenone and coinitiator amine for photopolymerization of PU acrylate

A novel diamine 3,5‐diamino‐4′‐phenoxylbenzophenone (DAPBP) was synthesized from the reaction of 3,5‐diamino‐4′‐chlorobenzophenone (DACBP) and phenol. Then through the polycondensation of DAPBP, toluene‐2,4‐diisocyanate (TDI), and N‐methyldiethanolamine (MDEA), we obtained a PU‐type polymeric photoinitiator containing side‐chain benzophenone (BP) and tertiary amine in the same macromolecule (PUSOA). Another polymeric photoinitiator without coinitiator amine in polymer chain (PUSO) was also synthesized for comparison. FT‐IR, ¹H NMR, and GPC analyses confirmed the structures of monomer and polymeric photoinitiators. The UV–Vis spectra of PUSOA, PUSO, and DAPBP are similar, and all exhibit the maximal absorption near 290 nm. ESR spectra indicate that PUSOA can generate active species most efficiently. The photopolymerization of PU acrylate, initiated by PUSOA, PUSO/MDEA, DAPBP/MDEA, and BP/MDEA, was studied by differential scanning photocalorimetry (photo‐DSC). The results show that the in‐chain coinitiator amine can significantly improve the photoefficiency of the polymeric photoinitiator and the PUSOA is more efficient for the polymerization of PU acrylate than its low‐molecular‐weight counterpart. Copyright © 2008 John Wiley & Sons, Ltd.     

Near‐infrared spectroscopy investigation of water effects on the cationic photopolymerization of vinyl ether systems

Real‐time Fourier transform near‐infrared spectroscopy has been used to monitor monomer and water concentrations simultaneously during cationic vinyl ether photopolymerization. The use of near‐infrared peak area methods allows the water content to be conveniently and nondestructively determined in any monomer or polymer for which the water peak has previously been calibrated by gravimetric analysis. Although the shape of the absorption band due to absorbed water in a monomer changes with the quantity of water, the integrated intensity from about 5350 to 4900 cm^?1 can be correlated directly to the water concentration, and this region is well removed from the vinyl‐based absorption at approximately 6190 cm^?1. This approach provides a highly informative, dynamic technique for examining the influence of moisture on polymerization reactions. Significant differences have been observed in the effects of absorbed water on the cationic photopolymerization kinetics of vinyl ether monomers with or without an ? OH group. Along with the rapid consumption of water coupled to vinyl ether polymerization, acid‐catalyzed hydrolysis reactions have also been spectroscopically observed, giving rise to the formation of aldehyde groups. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1985–1998, 2004     

Radical polymerization activity and mechanistic approach in a new three‐component photoinitiating system

A new three‐component photoinitiating system (based on isopropylthioxanthone ITX, amine AH, and a bifunctional benzophenone–ketosulfone BP‐SK photoinitiator) for acrylate polymerization reactions was investigated through steady‐state photolysis (photodegradation, redox potentials, and acidity release determinations) and time‐resolved laser spectroscopy. The photopolymerization activity has been checked. It is shown that addition of ITX to BP‐SK/AH clearly enhances the efficiency of the photopolymerization of clear or pigmented coatings. This is explained (although, a direct interaction between the triplet state of ITX and BP‐SK occurs to some extents) on the basis of the interaction of BP‐SK with the ketyl radical of ITX. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4531–4541, 2000     

Real‐time Fourier transform infrared study of the free‐radical ultraviolet‐induced polymerization of a hybrid sol–gel. II. The effect of physicochemical parameters on the photopolymerization kinetics

Free‐radical photocurable hybrid sol–gel materials have gained special interest during the last decades. Compared to thermally processed materials, they present the advantages of fast curing, low energy consumption, and spatiotemporal control of the reaction. Although comprehension of the photochemical step is fundamental, little is known about the characteristic of photochemistry in this kind of material. Real‐time Fourier transform infrared spectroscopy was used to study the photopolymerization of a hybrid sol–gel upon ultraviolet irradiation. Various photoinitiator systems were tested for their efficiency in inducing the polymerization of pendant polymerizable moieties anchored on a partially condensed silicate network. The presence of O₂ and the nature of the polymerizable function were shown to be crucial factors in the photoinduced process. The effects of the photoinitiator concentration and light intensity were also studied. These results were explained in terms of classical kinetic models developed for all‐organic photopolymers to point out the distinctive aspects related to the use of photoinitiated polymerization in hybrid sol–gel materials. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 831–840, 2003     

Photopolymerization of acrylates without photoinitiators with short‐wavelength UV radiation: A study with real‐time fourier transform infrared spectroscopy

This article reports on the UV photopolymerization of acrylates without photoinitiators. Initiation of the reaction was achieved by direct excitation of the acrylates during irradiation with short‐wavelength UV light by use of the 222‐nm emission of a KrCl^* excimer lamp. The reactivity of various acrylates was studied by real‐time Fourier transform infrared–attenuated total reflection spectroscopy. The rate and the extent of the reaction within the layer were strongly dependent on the depth of penetration of UV light, which was determined by the molar extinction coefficient of the acrylate. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 894–901, 2004     

A New Model and Measurement Technique for Dynamic Shrinkage during Photopolymerization of Multi‐Acrylates

Summary: A novel experimental set‐up has been devised to measure simultaneously, in real time, the conversion and shrinkage of multi‐acrylates during photopolymerization. The data show that the current practice of assigning the excess volume entirely as excess free volume is inappropriate as this leads to an increasing fractional free volume with conversion. We propose to partition the excess volume into free and occupied volume components. The new model produces satisfactory results.

Experimental set‐up for the simultaneous collection of shrinkage and conversion data.     

Naphthodioxinone‐1,3‐benzodioxole as photochemically masked one‐component type II photoinitiator for free radical polymerization

A 1,3‐benzodioxole derivative of naphthodioxinone, namely 2‐(benzo[d][1,3]dioxol‐5‐yl)‐9‐hydroxy‐2‐phenyl‐4H‐naphtho[2,3‐d][1,3]dioxin‐4‐one was synthesized and characterized. Its capability to act as caged one‐component Type II photoinitiator for free radical polymerization was examined. Upon irradiation, this photoinitiator releases 5‐benzoyl‐1,3‐benzodioxole possessing both benzophenone and 1,3‐dioxole groups in the structure as light absorbing and hydrogen donating sites, respectively. Subsequent photoexcitation of the benzophenone chromophore followed by hydrogen abstraction generates radicals capable of initiating free radical polymerization of appropriate monomers. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Cross‐linking photopolymerization of monoacrylate initiated by benzophenone

The chain‐end structure of the photopolymerized acrylate using benzophenone as an initiator was investigated as well as polymerization behavior. Dodecyl acrylate was used as a monomer in this study. Gelation occurred during ultraviolet (UV) irradiation, whereas a cross‐linker was not employed. Conversion‐time profile below gel point gave a linear first‐order plot suggesting that the steady‐state was held throughout polymerization. Matrix‐assisted laser desorption/ionization time‐of‐flight mass spectra of the resultant polymer indicated that most polymers had an acryloyl group at one of the chain‐ends, while some polymers had an acryloyl group at each chain‐end. The cross‐linking reaction leading to gelation would have been caused by the subsequent copolymerization of the residual monomer with the latter polymer having two acryloyl groups. Dissolved oxygen in the monomer solution influenced the polymer structure giving hydroxyl group at chain‐end. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1545–1553     

Influence of the alkene structure on the mechanism and kinetics of thiol–alkene photopolymerizations with real‐time infrared spectroscopy

The effect of the chemical structure on the reactivity of alkenes used in thiol–ene photopolymerizations has been investigated with real‐time infrared spectroscopy. Model studies of thiol–ene photoreactions with various monofunctional hydrocarbon alkenes and the monofunctional thiol ethyl‐3‐mercaptopropionate have been performed to identify and understand structure–reactivity relationships. The results demonstrate that terminal enes react very rapidly with thiol, achieve complete conversion, and are independent of the aliphatic hydrocarbon substituent length. Disubstitution on a single carbon of a terminal ene significantly reduces the reactivity, whereas substitution on the carbon α to the terminal ene has a minimal influence on the reactivity. Internal trans enes display reduced reactivity and a lower overall conversion and deviate from the standard thiol–ene reaction mechanism because of steric strain induced by 1,3‐interactions. The reactivity and conversion of internal trans enes decrease as the substituents on the ene become larger, reaching a minimum when the substituent size is greater than or equal to that of propyl groups. Internal cis enes react rapidly with thiol; however, they undergo a fast isomerization–elimination reaction sequence generating the trans ene, which proceeds to react at a reduced rate with thiol. The reactivity of cyclic enes is dictated by ring strain, stereoelectronic effects, and hydrogen abstractability. The reactivity trends in the model studies have been used to explain the photopolymerization mechanism and kinetics of a series of multifunctional thiol–ene systems. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 6283–6298, 2004     

Thiol‐ene photopolymerization of polymer‐derived ceramic precursors

The liquid, ceramic precursor monomer VL20 was copolymerized with a thiol monomer in a traditional radical thiol‐ene photopolymerization. Polymerization occurred via addition of the thiol functional group to the vinyl silazane functional group in a 1:1 ratio consistent with a step‐growth polymerization. Gelation occurred at a high conversion of functional groups (70%) consistent with an average molecular weight and functionality of 560 and 1.7, respectively, for VL20 monomers. Initiatorless photopolymerization of the thiol‐VL20 system also occurred upon irradiation at either 365 or 254 nm. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1752–1757, 2004     

2,4-双(三氯甲基)-6-(4-甲氧基-1-苯乙烯基)-s-三嗪光引发剂的合成与聚合动力学研究

本研究以4-甲氧基苯甲醛和2,4-双(三氯甲基)-6-甲-基1,3,5-三嗪为原料合成了一种引发剂2,4-双(三氯甲基)-6-(4-甲氧基-1-苯乙烯基)-s-三嗪(BMT),并利用红外光谱、紫外光谱、核磁共振等手段对其结构进行表征.利用实时红外光谱研究其光聚合动力学性能,结果表明,不同引发剂浓度,不同单体和不同光强对单体双键转化率都有一定的影响.     

Synthesis and characteristics of photopolymerized benzophenone

Photopolymerization is extensively used in today's industrial field due to its advantages of rapid reaction, environmental friendly, energy saving and economical. Benzophenone is a most common photoinitiator (PI) using in photopolymerization because of its superior ability to initiate acrylate monomers. However, the intrinsic nature of initiator molecules is that they migrate out of polymer network, which limits its application, especially in the domain of food packaging materials. A polymerizable PI 4‐methylbenzophenone acrylate (MBPAc) was synthesized by a facile procedure and characterized by ¹H NMR, ¹³C NMR, and MS analyses. A systematic study of the photopolymerization kinetics of MBPAc was explored by the Real‐Time Fourier Transform Infrared Spectrometer. The results show that the final conversion and photopolymerization rate of acrylate monomers are closely related to the factors of their chemical structure, viscosity, functionality and light intensity, which means MBPAc is an efficient PI. Ultraviolet‐visible Spectrophotometer and vitro cytotoxicity measurement results indicate that the noncytotoxic MBPAc shows significantly lower migration than its analogue. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 313–320     

FTIR Microscopy for Kinetic Measurements in High‐Throughput Photopolymerization: Experimental Design and Application

Libraries with varying composition and exposure time were developed to enable high‐throughput analysis of conversion using FTIR spectroscopy. This technique was demonstrated by measuring viscosity and backbone chain structure effects using four monomers: DPGDA, TEGDA, bisphenol‐A‐glycidyl diacrylate and ethoxylated bisphenol‐A diacrylate. DPGDA has equivalent viscosity and double bond concentration with a shorter backbone chain length as compared to TEGDA. The ultimate conversion of TEGDA copolymerizations as compared to equivalent DPGDA copolymerizations is lowered from 15 to 5% due to differences in crosslink space chemistry and glass transition temperatures of the copolymer formulation.