Eine vollständige CNDO/2-CI Berechnung von H2O und H2O+

Zusammenfassung Für die Moleküle H₂O und H₂O⁺ wurde unter Verwendung von zusätzlichen Operatoren, die untereinander und mit dem CNDO-Hamiltonoperator kommutieren, eine vollständige CNDO/2-CI Berechnung des Grundzustandes und der angeregten Zustände durchgeführt.

---

Full CNDO/2-CI calculation on H₂O and H₂O⁺

Using additional normal constants of motion of the CNDO-Hamilton operator, full CNDO/2-CI calculations of the ground and excited states for the molecules H₂O and H₂O⁺ were performed.

---

Résumé Calculs complets CNDO/2-CI des états fondamentaux et excités des molécules H₂O et H₂O⁺, en utilisant des constantes normales du mouvement associées à l'hamiltonien CNDO.

---

---

Für das freundliche Durchlesen des Manuskriptes danken wir den Herren Dr. J. Fabian, Dr. A. Mehlhorn und Dipl. Chem. J. Kuhn.

---

Für die gewährte Unterstützung sind wir den Herren Doz. R. Zahradník und Dr. M, Tomáek zu Dank verpflichtet.     

Gram-Scale Synthesis of an Ultrastable Microporous Metal-Organic Framework for Efficient Adsorptive Separation of C2H2/CO2 and C2H2/CH4

A highly water and thermally stable metal-organic framework (MOF) Zn₂(Pydc)(Ata)₂ (1, H₂Pydc = 3,5-pyridinedicarboxylic acid; HAta = 3-amino-1,2,4-triazole) was synthesized on a large scale using inexpensive commercially available ligands for efficient separation of C₂H₂ from CH₄ and CO₂. Compound 1 could take up 47.2 mL/g of C₂H₂ under ambient conditions but only 33.0 mL/g of CO₂ and 19.1 mL/g of CH₄. The calculated ideal absorbed solution theory (IAST) selectivities for equimolar C₂H₂/CO₂ and C₂H₂/CH₄ were 5.1 and 21.5, respectively, comparable to those many popular MOFs. The Q_st values for C₂H₂, CO₂, and CH₄ at a near-zero loading in 1 were 43.1, 32.1, and 22.5 kJ mol⁻¹, respectively. The practical separation performance for C₂H₂/CO₂ mixtures was further confirmed by column breakthrough experiments.     

Neue Verbindungen im System CaO/SiO2/CaCl2/H2O

New Compounds in the System CaO/SiO₂/CaCl₂/H₂O The hydrothermal formation of novel calcium silicate hydrates of compositions 5 CaO · 2 SiO₂ · CaCl₂ · 4 H₂O, 5 CaO · 2 SiO₂ · CaCl₂ · 2 H₂O and 4 CaO · 2 SiO₂ · CaCl₂ · H₂O from Ca₃SiO₅ and mixtures of CaO and SiO₂, respectively, in presence of calciumchloride at 200°–350 °C is described. From molybdate-reaction, ²⁹Si MAS NMR, DTA and TG measurements it is concluded that these compounds are based on disilicate anions and are to be interpreted as calcium hydroxide disilicate chlorides.     

Removal of multiple pollutants from water using noble Ag/Au/magnetite/graphene/H2O2 system under light and ultrasound irradiation

Ag/Au/Fe₃O₄/graphene composites prepared by a hydrothermal method demonstrated excellent activation of H₂O₂ and were used to degrade methylene blue (MB) in solution in the presence of organic acids and inorganic ions under light and ultrasound irradiation. The physicochemical properties of the obtained composites were characterized using various methods. The results showed that the composites exhibited excellent magnetic properties, crystallinity, and stability. The results of catalysis experiments revealed that the removal efficiency of MB increased when Ag and Au were both incorporated into the Fe₃O₄/graphene/H₂O₂ system compared with the removal efficiency achieved with separate Ag-Fe₃O₄/graphene/H₂O₂ and Au-Fe₃O₄/graphene/H₂O₂ systems, indicating a substantial synergistic interaction between the two metallic nanoparticles and the Fe₃O₄/graphene/H₂O₂ systems. The presence of an organic acid accelerated degradation of the MB/H₂O₂ system, whereas almost all of the investigated anions inhibited the degradation of MB; their inhibition effects followed the order CO₃^2? > NO₃^? > Cl^? > F^? > H₂PO₄^? > SO₄^2? > I^?. Cations of Na⁺, K⁺, Ca²⁺, and Mg²⁺ also suppressed MB degradation, likely because of the influence of Cl^? coexisting in the solutions.     

Examination of the structures,energetics, and vibrational frequencies of small sulfur-containing prototypical dimers, (H2S)2 and H2O/H2S

The optimized geometries, vibrational frequencies, and dissociation energies from MP2 and CCSD(T) computations with large correlation consistent basis sets are reported for (H₂S)₂ and H₂O/H₂S. Anharmonic vibrational frequencies have also been computed with second-order vibrational perturbation theory (VPT2). As such, the fundamental frequencies, overtones, and combination bands reported in this study should also provide a useful road map for future spectroscopic studies of the simple but important heterogeneous H₂O/H₂S dimer in which the hydrogen bond donor and acceptor can interchange, leading to two unique minima with very similar energies. Near the CCSD(T) complete basis set limit, the HOH⋯SH₂ configuration (H₂O donor) lies only 0.2 kcal mol⁻¹ below the HSH⋯OH₂ structure (H₂S donor). When the zero-point vibrational energy is included, however, the latter configuration becomes slightly lower in energy than the former by <0.1 kcal mol⁻¹. © 2018 Wiley Periodicals, Inc.     

Über die Alkaliselenoarsenate(III) KAsSe3 · H2O,RbAsSe3 · 1/2 H2O und CsAsSe3 · 1/2 H2O

On the Alkali Selenoarsenates(III) KAsSe₃ · H₂O, RbAsSe₃ · 1/2 H₂O, and CsAsSe₃ · 1/2 H₂O The alkali selenoarsenates(III) KAsSe₃ · H₂O, RbAsSe₃ · 1/2 H₂O, and CsAsSe₃ · 1/2 H₂O have been prepared by hydrothermal reaction of the respective alkali carbonate with As₂Se₃ at a temperature of 135°C. Their X-ray structural analyses demonstrated that the compounds contain polyselenoarsenate(III) anions (AsSe₃^?)_n, in wich the basic units are ψ-AsSe₃ tetrahedra, which are linked together through Se? Se bonds into infinite zweier single chains. The Rb and Cs salts are isotypic.     

Determination of long-range intermolecular interaction energies using RPA/moment function methods. Application to H2O,H2O2 and H2O/H2O2 mixtures

The fully expanded expression for the Boltzmann-averaged pairwise intermolecular interaction energy of two molecules of arbitrary symmetry in the long-range (interaction < kT) limit has recently been determined explicitly as a series in r⁻ⁿ (r is the intermolecular separation) for n < 11. The resultant expression contains only multipolar products (point moment functions: PMFs) and energy terms which are characteristic of the ground state and excitation properties of the isolated molecules. These quantities are determined for H₂O and H₂O₂ using the single particle-hole RPA method, and the interaction energy contributions determined by direct state summation. Static electric dipole polarizabilities are determined as a by-product of the procedure, and are shown to agree closely with finite field results using a comparable basis. For the chiral H₂O₂/H₂O₂ system, the r⁻⁶ and r⁻⁹ discrimination energies are also calculated, suggesting that the r⁻⁹ contributions could well exceed the r⁻⁶ discriminatory terms for separations less than 20 au.     

Shock tube studies of the N2O/Ar and N2O/H2/Ar systems

N₂O decay has been monitored via infrared emission for a series of mixtures containing N₂O/Ar and N₂O/H₂/Ar. These mixtures were studied behind reflected shock waves in the temperature interval of 1950–3075°K with total concentrations ranging from 1.2 to 2.5 × 10¹⁸ molec/cm³. In all cases the N₂O decayed exponentially, and a rate constant k_obs was obtained. Runs without added H₂ could be described by the following Arrhenius parameters: log A = ?9.72 ± 0.08 (in units of cm³/molec · sec) and E_A = 203.5 ± 3.6 kJ/mole. Addition of 0.01% and 0.1% H₂ was observed to increase the decay rate; the largest increase occurred between 2250 and 2500°K with 0.1% H₂, where k_obs doubled. Mixtures with no added H₂ were analyzed by numerical integration of the following reactions: Quantitative agreement between calculations and observations were obtained with both high and low choices for k₂ and k₃. The additional reactions were included in the analysis of the mixtures containing H₂. Here agreement was obtained only when low values were assigned to k₂ and k₃. The combinations of k₁ ← k₃ which agreed with all the data were k₁ = 3.25 × 10^?10 exp (?215 kJ/RT) and k₂ = k₃ = 1.91 × 10^?11 exp (-105 kJ/RT).     

Self-irradiation effects in plutonium/IV/ hydroxo phenyl acetate Pu/OH/3/C6H5CH2COO/ and plutonium/IV/ hydroxo α-naphthyl acetate Pu/OH/3/C10H7CH2COO/: EPR investigations

Self-irradiation effects due to -radiation in plutonium/IV/ hydroxo phenyl acetate, Pu/OH/₃/C₆H₅CH₂COO/ and hydroxo -naphthyl acetate, Pu/OH/₃/C₁₀H₇CH₂COO/ have been studied by EPR technique. OH and C₆H₅CH₂COO^. species are identified in the phenyl acetate while the C₁₀H₇CH₂COO^. species is detected in -naphthyl acetate. The values of the efficiency parameter, , determined for OH, C₆H₅CH₂COO^. and C₁₀H₇CH₂COO^. species are 0.8, 1.31 and 2.18, respectively. The results are interpreted on the basis of the thermal spikes associated with the alpha particle interaction with the lattice.     

Synthesis of hexylthiols C6H13SH−1/1, 2, 3, 4−14C1/4/' /1-thiol[35S]/ and C6H13SH−2/1, 2, 3, 4−14C1/4/, /2-thiol[35S]/

A synthesis of¹⁴C and³⁵S double labelled hexylthiols: C₆H₁₃SH–1/1, 2, 3, 4–¹⁴C_1/4/, /1-thiol[³⁵S]/ and C₆H₁₃SSH–2/1, 2, 3, 4–¹⁴C_1/4/, /2-thiol[³⁵S]/ based on H₂ ³⁵S and C₆H₁₂–/1, 2, 3, 4–¹⁴C_1/4/ has been developed and described.     

Ion/Molecule reactions in SiH4/H2S and GeH4/H2S mixtures

The gas phase ion chemistry of silane/hydrogen sulfide and germane/hydrogen sulfide mixtures was studied by ion trap mass spectrometry (ITMS), in both positive and negative ionization mode. In positive ionization, formation of X/S (X = Si, Ge) mixed ions mainly takes place via reactions of silane or germane ions with H₂S, through condensation followed by dehydrogenation. This is particularly evident in the system with silane. On the other side, reactions of H_nS₂⁺ ions with XH₄ (X = Si, Ge) invariably lead to formation of a single X? S bond. In negative ionization, a more limited number of mixed ion species is detected, but their overall abundance reaches appreciable values, especially in the SiH₄/H₂S system. Present results clearly indicate that ion processes play an important role in formation and growth of clusters eventually leading to deposition of amorphous solids in chemical vapor deposition (CVD) processes. Copyright © 2009 John Wiley & Sons, Ltd.     

基于 H2/O2 等离子体和钛硅沸石的丙烯气相环氧化方法

 将 H₂/O₂ 非平衡等离子体现场产生的气态 H₂O₂和丙烯与耦合反应器中钛硅沸石 TS-1 直接接触, 实现了丙烯气相环氧化反应. 结果表明, 非平衡等离子体生成气态 H₂O₂ 的速率由介质阻挡放电的输入功率决定, 环氧丙烷的生成速率和选择性取决于钛硅沸石催化剂和反应条件. 在 H₂ 和 O₂ 进料流量分别为 170 和 8 ml/min, 介质阻挡放电输入功率为 3.5 W, 环氧化反应温度为 110 ^oC, 丙烯进料量为 18 ml/min, 催化剂用量为 0.8 g 的条件下, 生成环氧丙烷产率达 246.9 g/(kg•h)、环氧丙烷选择性和 H₂O₂ 有效利用率分别为 95.4% 和 36.1%, 反应 36 h 内未见催化剂失活.     

A New Microporous Metal‐Organic Framework for Highly Selective C2H2/CH4 and C2H2/CO2 Separation at Room Temperature

We have successfully designed and synthesized a new tetracarboxylic linker, which constructed its first three‐dimensional microporous metal‐organic framework (MOF ), [Cu₂(DDPD )(H₂O )₂]•Gx ( ZJU ‐13 , H₄DDPD =5,5'‐(2,6‐dihydroxynaphthalene‐1,5‐diyl)diisophthalic acid, ZJU =Zhejiang University, G = guest molecules) via solvothermal reaction. Due to open Cu²⁺ sites and optimized pore size, the activated ZJU ‐13a displays high separation selectivity for C₂H₂ /CH₄ of 74 and C₂H₂ /CO₂ of 12.5 at low pressure by using Ideal Adsorbed Solution Theory (IAST ) simulation at room temperature.     

Efficient thiocyanation of phenols and anilines in the CeBr3 / H2O2 system

An efficient electrophilic thiocyanation of phenols and anilines in the CeBr₃ / H₂O₂ system has been developed. The system CeBr₃ / H₂O₂ generates reactive brominating species which would react with NH₄SCN to deliver the active SCN cations in situ. The Br^- anion can be further oxidized to Br⁺, thereby furnishing the catalytic cycle.     

Rate constants for the elementary reactions between CN radicals and CH4, C2H6, C2H4, C3H6, and C2H2 in the range: 295 ⩽ T/K ⩽ 700

Pulsed laser photolysis, time-resolved laser-induced fluorescence experiments have been carried out on the reactions of CN radicals with CH₄, C₂H₆, C₂H₄, C₃H₆, and C₂H₂. They have yielded rate constants for these five reactions at temperatures between 295 and 700 K. The data for the reactions with methane and ethane have been combined with other recent results and fitted to modified Arrhenius expressions, k(T) = A′(298) (T/298)ⁿ exp(?θ/T), yielding: for CH₄, A′(298) = 7.0 × 10^?13 cm³ molecule^?1 s^?1, n = 2.3, and θ = ?16 K; and for C₂H₆, A′(298) = 5.6 × 10^?12 cm³ molecule^?1 s^?1, n = 1.8, and θ = ?500 K. The rate constants for the reactions with C₂H₄, C₃H₆, and C₂H₂ all decrease monotonically with temperature and have been fitted to expressions of the form, k(T) = k(298) (T/298)ⁿ with k(298) = 2.5 × 10^?10 cm³ molecule^?1 s^?1, n = ?0.24 for CN + C₂H₄; k(298) = 3.4 × 10^?10 cm³ molecule^?1 s^?1, n = ?0.19 for CN + C₃H₆; and k(298) = 2.9 × 10^?10 cm³ molecule^?1 s^?1, n = ?0.53 for CN + C₂H₂. These reactions almost certainly proceed via addition-elimination yielding an unsaturated cyanide and an H-atom. Our kinetic results for reactions of CN are compared with those for reactions of the same hydrocarbons with other simple free radical species. © John Wiley & Sons, Inc.     

Kinetics of Depletion of Electronically Excited Ti Atom by CH4, C2H2, C2H4 and C2H6

The kinetics of depletion of ground state Ti(a³F) and electronically excited state Ti(a⁵F) upon interactions with CH₄, C₂H₂, C₂H₄, and C₂H₆ are studied in a fast-flow reactor at a He pressure of 0.70 Torr. No depletion of ground state Ti(a³F) was observed upon interaction with all hydrocarbons studied here. Two alkanes, CH₄ and C₂H₆, were also quite inert for depletion of the excited state Ti(a⁵F), On the other hand, C₂H₂ and C₂H₄ deplete the excited state Ti(a⁵F) very efficiently. Rate constants were determined to be (266 ± 86) and (476 ± 88) × 10^?12 cm³s^?1 for Ti(a⁵F) + C₂H₄ and Ti(a⁵F) + C₂H₂, respectively. These large rate constants compared with the ground state Ti were explained by an electron donor-acceptor interaction model that works in the interaction between C₂H₄ or C₂H₂ and the excited state with unfilled 4s orbital.     

Photoinduced Elimination of H2 from [Mo(η5-C5H5)2H2]. Generation of Molybdenocene.

Ultraviolet irradiation of deaerated solutions of [Mo(η⁵-C₅H₅)₂H₂] results in elimination of H₂ and generation of [Mo(η⁵-C₅H₅)₂]. The transient molybdenocene can be trapped with substrates such as CO, C₂H₂, and PR₃ to yield stable adducts, but in the absence of substrate, oligomerization to the previously described [Mo(η⁵-C₅H₅)₂]_x occurs.     

Hydrothermal Synthesis and Characterization Properties of C7H12N2[H2PO4]2.1/2H2O

An orthophosphoric hybrid material was successfully prepared by a hydrothermal reaction at 110 °C. A single crystal X-ray structure, thermal behavior, IR, and NMR spectroscopy investigations are given for a new organic cation bis dihydrogenomonophosphate C₇H₁₂N₂[H₂PO₄]₂.1/2H₂O. The latter has been synthesized hydrothermally using 2,4-diaminotoluene (DAT) and orthophosphoric acid. The atomic arrangement can be described as inorganic sheets alternating with inorganic-organic layers. The organic group C₇H₁₂N⁺ ₂ is located between inorganic groups to build multiple hydrogen bonds to ensure the three-dimensional cohesion network. The thermal behavior and IR, NMR and impedance spectroscopy studies are discussed for the powder samples of this compound.

Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements to view the free supplemental file.     

Radiolysis in H2O/D2O mixtures. Hydrogen production under LOCA simulation

The hydrogen isotope radiolytic yields, G(H₂), G(HD) and G(D₂) were determined in H₂O/D₂O mixtures under chemical conditions close to a LOCA in a PHWR like Atucha I Nuclear Station, that is 2·10^–3 MH₃BO₃ and p(H+D)=8.5±0.2. The total hydrogen radiolytic yield G(H₂+HD+D₂) as a function of the deuterium atom fraction goes through a flat maximum at about 0.58. This result in dicates that the 4% flammability limit for hydrogen in the reactor's containment with be reached sooner than what is expected assuming a linear combination of pure H₂ and D₂ radiolytic yields. Hydrogen radiolytic production in 10^–3 M KBr in H₂O/D₂O mixtures gives the same results as in the boric solutions suggesting a bimolecular B(OH) ₄ ^– +OH reaction. Identical isotope concentration factors were calculated for both solutions.     

Novel organic/inorganic PDI-Urea/BiOBr S-scheme heterojunction for improved photocatalytic antibiotic degradation and H2O2 production

The matched energy band structure and efficient carrier separation efficiency are the keys to heterogeneous photocatalytic reactions. A novel organic/inorganic step scheme (S-scheme) heterojunction PDI-Urea/BiOBr composite photocatalyst was constructed by simple solvothermal reaction combined with in-situ growth strategy. The composite photocatalyst not only has high chemical stability, but also can generate and accumulate a large number of active species (h⁺, ^?O₂^?, ^?OH, H₂O₂). PDI-Urea/BiOBr showed higher photocatalytic activity for the degradation of antibiotic such as ofloxacin (OFLO), tetracycline (TC) and the production of H₂O₂ in the spectral range of 400–800 nm. The apparent rate constant of 15% PDI-Urea/BiOBr for photocatalytic degradation of TC (or OFLO) was 2.7 (or 2.5) times that of pure BiOBr and 1.7 (or 1.8) times that of pure PDI-Urea. The H₂O₂ evolution rate of 15% PDI-Urea/BiOBr was 2.5 times that of PDI-Urea and 1.5 times that of BiOBr, respectively. This work has formed a mature S-scheme heterojunction design thought and method, which offers new visions for the development of heterogeneous photocatalysts.