Influence of Dye Content on the Conduction Band Edge of Titania in the Steam‐treated Dye‐dispersing Titania Electrodes

The titania and dye‐dispersing titania electrodes were prepared by a nitric acid‐catalyzed sol‐gel process. The dye‐dispersing titania contains the dye molecules dispersed on the surface of the individual nanosized titania particles. The photo‐cyclic voltammetry (Photo‐CV) and photoelectric measurements of the dye‐dispersing titania electrodes were conducted to clarify the factors changing the conduction band edge of the titania and the open‐circuit voltage (V_oc) of the electrodes. The remaining nitrate ions caused a negative shift of conduction band edge of the titania of the dye‐dispersing titania. The conduction band edge of the titania was shifted in a negative direction in the electrode containing a greater amount of the dye. These results are due to the adsorption of nitrate ions and the dye‐titania complex formation on the titania particle surface. The effect of the dye‐titania complex formation on the shift in the titania conduction band edge was greater than that of the adsorption of nitrate ions due to strong interaction between the dye and titania through the carboxylate and quinone‐like groups of the dye. The shift in the titania conduction band edge corresponded to the change in the V_oc value.     

Air‐Stable,Narrow‐Band‐Gap Ambipolar C60 Fullerene–Hydrazone Hybrid Materials

Fullerene–hydrazone dyads have been synthesized using the Confalone reaction followed by condensation with phenylhydrazines. Room‐temperature xerographic time‐of‐flight, ionization potential, and cyclic voltammetry measurements indicate that these narrow‐band‐gap (E_g<1.5 eV), ambipolar charge‐transporting dyads with balanced hole‐ and electron mobilities, which operate in air, are attractive materials for various optoelectronic applications.     

Electrochemical oxidation of 4‐tert‐butylcatechol in the presence of β‐cyclodextrin: Interplay between E and CE mechanisms

Electrochemical behavior of 4‐tert‐butylcatechol (H₂Q) in the presence of β‐cyclodextrin (β‐CD) was studied using cyclic voltammetry and hydrodynamic voltammetry. An electrochemical model in which both H₂Q and its oxidized form (Q) created inclusion complexes with β‐CD was proposed, and it was concluded that both free (as a result of complex‐dissociation reaction) and complex species could performed electron transfer. The heterogeneous rate constant for electron transfer of the inclusion complexes and their kinetic and thermodynamic parameters were obtained using digital simulation. © 2012 Wiley Periodicals, Inc. Int J Chem Kinet 44: 507–513, 2012     

Electrochemical and optical properties of novel donor‐acceptor thiophene‐perylene‐thiophene polymers

In this study, donor‐acceptor type thiophene‐perylene‐thiophene monomers were synthesized and polymerized by both oxidative polymerization using FeCl₃ as catalyst and the electrochemical process. UV–vis, FTIR, ¹H NMR, and elemental analysis techniques were used for structural characterization. Thermal behaviors of these compounds were determined by using TGA system. The highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO) energy levels and electrochemical and optical band gap values were calculated by using the results of cyclic voltammetry and UV–vis measurements, respectively. The number–average molecular weight (M_n), weight–average molecular weight (M_w), and polydispersity index (PDI) values of synthesized polymers were determined by size exclusion chromatography. Conductivity measurements of these polymers were carried out by electrometer by using a four‐point probe technique. The conductivity was observed to be increased by iodine doping. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1974–1989, 2008     

Electrosynthesis of Poly(para)phenylene in an Ionic Liquid: Cyclic Voltammetry and in Situ STM/Tunnelling Spectroscopy Studies

The electropolymerization of benzene in the air and water‐stable ionic liquid 1‐hexyl‐3‐methylimidazolium tris(pentafluoroethyl)trifluorophosphate (HMIm)FAP is investigated. The study comprises cyclic voltammetry, IR and in situ STM/tunnelling spectroscopy measurements. The IR results indicate that poly(para)phenylene is the end product of the electropolymerization of benzene in the employed ionic liquid. The resulting conjugation lengths of the product fall between 19 and 21. A polymer reference electrode is used successfully for the electrochemical polymerization of benzene. The first in situ STM results show that the electropolymerization of benzene in the ionic liquid can be probed on the nanoscale and the band gap of the prepared polymer can be determined. The electrodeposited polymer film obtained at a constant potential of 1.0 V vs PPP (polyparaphenylene) exhibits a band gap of 2.9±0.2 eV.     

Surface‐State‐Mediated Charge‐Transfer Dynamics in CdTe/CdSe Core–Shell Quantum Dots

Herein, we report the synthesis of aqueous CdTe/CdSe type‐II core–shell quantum dots (QDs) in which 3‐mercaptopropionic acid is used as the capping agent. The CdTe QDs and CdTe/CdSe core–shell QDs are characterized by X‐ray diffraction (XRD), high‐resolution transmission electron microscopy (HR‐TEM), steady‐state absorption, and emission spectroscopy. A red shift in the steady‐state absorption and emission bands is observed with increasing CdSe shell thickness over CdTe QDs. The XRD pattern indicates that the peaks are shifted to higher angles after growth of the CdSe shell on the CdTe QDs. HR‐TEM images of both CdTe and CdTe/CdSe QDs indicate that the particles are spherical, with a good shape homogeneity, and that the particle size increases by about 2 nm after shell formation. In the time‐resolved emission studies, we observe that the average emission lifetime (τ_av) increases to 23.5 ns for CdTe/CdSe (for the thickest shell) as compared to CdTe QDs (τ_av=12 ns). The twofold increment in the average emission lifetime indicates an efficient charge separation in type‐II CdTe/CdSe core–shell QDs. Transient absorption studies suggest that both the carrier cooling and the charge‐transfer dynamics are affected by the presence of traps in the CdTe QDs and CdTe/CdSe core–shell QDs. Carrier quenching experiments indicate that hole traps strongly affect the carrier cooling dynamics in CdTe/CdSe core–shell QDs.     

Graphene Nanosheets and Quantum Dots: A Smart Material for Electrochemical Applications

A novel material for the electrochemical determination of endocrine disruptors using a composite based on graphene oxide modified with cadmium telluride quantum dots has been evaluated. The morphology, structure and electrochemical performance of the composite electrodes were characterised by transmission electron microscopy, dynamic light scattering, UV‐visible absorption spectra, fluorescence spectra, Raman spectra and cyclic voltammetry. The dynamic light scattering, transmission electronic microscopy and spectrophotometric measurements all showed good distribution of the quantum dots with a small particle size. The electrochemical measurements demonstrated the high performance of the composite response in the presence of a light source. Differential pulse voltammetry allowed the development of a method to determine 17β‐estradiol levels in the range from 0.2 to 4.0 μmol L ^?1 with a detection limit of 2.8 nmol L ^?1 (0.76 μg L ^?1).     

基于血红蛋白/硒化镉量子点多层膜的H2O2生物传感器

合成了水溶性硒化镉(CdSe)量子点,利用组装技术和静电吸附作用,将带正电荷的血红蛋白(Hb)和带负电荷的CdSe量子点层层组装到壳聚糖(chit)修饰的玻碳电极(GCE)表面,构建基于{Hb/CdSe}n多层膜的无电子媒介体的电流型生物传感器({Hb/CdSe}3/chit/GCE).运用紫外-可见吸收光谱、电致化学发光、交流阻抗和循环伏安技术来表征修饰膜,并研究传感器的作用机理、性能及分析应用.结果表明:与量子点薄膜法及量子点/血红蛋白复合物法等固载血红蛋白的其他方法相比,层层组装法能显著提高血红蛋白的固定量,保持血红蛋白的生物活性,增强传感器的灵敏度和稳定性.传感器检测H2O2的线性范围为4.0×10-8～4.8×10-6 mol·L-1(r=0.999 1),检测限为2.0×10-8mol·L-l.多层膜的电致化学发光研究,表明修饰电极有望用于电致化学发光传感器的制备.     

Structural and Size Effects on the Spectroscopic and Redox Properties of CdSe Nanocrystals in Solution: The Role of Defect States

Two series of CdSe quantum dots (QDs) with different diameters are prepared, according to frequently used protocols of the same synthetic procedure. For each sample the photophysical properties and the potentials for the first reduction and oxidation processes in organic solution are determined. The band gap obtained from electrochemical experiments is compared with that determined from the absorption and luminescence spectra. While the optical band gap decreases upon increasing the nanocrystal diameter, as expected on the basis of quantum confinement, the redox potentials and the electrochemical band gap are not monotonously related to the QD size. For both series, the smallest and largest QDs are both easier to oxidize and reduce than mid‐sized QDs. In fact, the latter samples exhibit very broad voltammetric profiles, which suggests that the heterogeneous electron‐transfer processes from/to the electrode are kinetically hindered. Conversely, the electrochemical band gap for the smallest and largest particles of each series is somewhat smaller than the optical band gap. These results indicate that, while the optical band gap depends on the actual electron–hole recombination within the nanocrystal, and therefore follows the size dependence expected from the particle‐in‐a‐box model, the electrochemical processes of these QDs are strongly affected by other factors, such as the presence of surface defects. The investigations suggest that the influence of these defects on the potential values is more important for the smallest and largest QDs of each series, as confirmed by the respective luminescence bands and quantum yields. An interpretation for the size‐dependent evolution of the surface defects in these nanocrystals is proposed based on the mechanism of their formation and growth.     

Efficient Bottom‐Up Preparation of Graphene Nanoribbons by Mild Suzuki–Miyaura Polymerization of Simple Triaryl Monomers

Herein an efficient bottom‐up solution‐phase synthesis of N=9 armchair graphene nanoribbons (GNRs) is described. Catalyzed by Pd(PtBu₃)₂, Suzuki–Miyaura polymerization of a simple and readily available triaryl monomer provides a novel GNR precursor with a high molecular weight and excellent solubility. Upon cyclodehydrogenation, the resulting GNR exhibits semiconducting properties with an approximately 1.1 eV band gap (LUMO: ?3.52 eV; HOMO: ?4.66 eV) as characterized by UV/Vis‐NIR spectroscopy and cyclic voltammetry.     

CdSe Spherical Quantum Dots Stabilised by Thiomalic Acid: Biphasic Wet Synthesis and Characterisation

CdSe quantum dots stabilised by thiomalic acid have been synthesised by an aqueous biphasic ligand exchange reaction in air. The materials are completely water‐soluble and were found to be stable over a long time. X‐ray diffraction and transmission electron microscopy reveal the formation of CdSe nanocrystals with cubic structure (a=0.6077 nm; spatial group: F‐43m). The average particle size is about 5 nm. Energy dispersive X‐ray analysis shows that the nanocrystals are nonstoichiometric, with a Cd/Se ratio varying between 60/40 and 70/30, and indicates the presence of Cd²⁺ ions at the nanocrystal surface. Diffuse reflectance infrared Fourier transform measurements suggest that thiomalic acid chelates CdSe through the thiol group and one carboxylic function, while the second COOH group is semi‐free. A complex‐like structure is proposed, in which thiomalic acid forms a five‐membered chelate ring with the Cd²⁺ ions present on the nanocrystal surface. Chelate effect accounts for the easiness of ligand exchange and is expected to additionally stabilise the nanosystem.     

Influence of highly efficient PbS counter electrode on photovoltaic performance of CdSe quantum dots-sensitized solar cells

PbS electrode with high catalytic activity to S_n ^2? reduction certificated by the measurements of electrochemical impedance spectroscopy and cyclic voltammetry was prepared by a simple method. The high catalytic activity makes it be a low-cost alternative counter electrode to platinum (Pt) to be used in quantum dots-sensitized solar cells (QDSSCs) based on polysulfide electrolyte. The photovoltaic performance enhancement of the quantum dots (QDs)-sensitized semiconductor thin films due to the PbS counter electrode was evaluated by fabricating QDSSCs based on CdSe QDs-sensitized ZnO (SnO₂) thin film. CdSe QDs-sensitized ZnO thin film has the lower internal total series resistance and electron transmission time, the higher electron lifetime and electron collection efficiency than the CdSe QDs-sensitized SnO₂ thin film. Replacing the Pt counter electrode with the PbS counter electrode leads to more improvement on the short circuit photocurrent density for QDSSC based on the ZnO thin film than the SnO₂ thin film. Therefore, the process to limit the photovoltaic performance of CdSe QDs-sensitized solar cell and the possible way to improve the photovoltaic performance were analyzed.     

Effect of Chemical Charging/Discharging on Plasmonic Behavior of Silver Metal Nanoparticles Prepared using Citrate‐Stabilized Cadmium Selenide Quantum Dots

The thermodynamics and kinetics of the chemical and electrochemical charging of a catalyst surface are very important to understand its applicability as a catalyst material, particularly in redox catalysis. Through the present study, we hereby communicate the results obtained from our detailed investigations related to the effect of chemical charging on the plasmonic behavior of silver metal nanoparticles (Ag MNPs) as redox catalysts. Two different batches of Ag MNPs were prepared through thermally assisted chemical reduction of silver ions. The difference in these batches was the use or not of citrate‐capped cadmium selenide quantum dots (Q‐CdSe) for the reduction of solution‐phase silver ions to their colloidal plasmonic phase. The charge on the surfaces of the Ag MNPs was varied by the chemical electron injection method by using BH₄^? ions from a NaBH₄ solution. The processes of charging and discharging were monitored by using UV/Vis absorption spectroscopy. The impact of the concentration of the reductant on the charging and discharging processes was also investigated. The Ag MNPs were also tested for their voltammetric response, wherein it was observed that it was more difficult to oxidize the Ag MNPs prepared with Q‐CdSe seeds than to oxidize Ag MNPs prepared without Q‐CdSe particles. Our results demonstrate that Q‐CdSe seeds not only enhance the redox catalytic activity of Ag MNPs but also provide stability towards polarization of their plasmonic behavior.     

Quantum dot solar cells. Tuning photoresponse through size and shape control of CdSe-TiO2 architecture

Different-sized CdSe quantum dots have been assembled on TiO2 films composed of particle and nanotube morphologies using a bifunctional linker molecule. Upon band-gap excitation, CdSe quantum dots inject electrons into TiO2 nanoparticles and nanotubes, thus enabling the generation of photocurrent in a photoelectrochemical solar cell. The results presented in this study highlight two major findings: (i) ability to tune the photoelectrochemical response and photoconversion efficiency via size control of CdSe quantum dots and (ii) improvement in the photoconversion efficiency by facilitating the charge transport through TiO2 nanotube architecture. The maximum IPCE (photon-to-charge carrier generation efficiency) obtained with 3 nm diameter CdSe nanoparticles was 35% for particulate TiO2 and 45% for tubular TiO2 morphology. The maximum IPCE observed at the excitonic band increases with decreasing particle size, whereas the shift in the conduction band to more negative potentials increases the driving force and favors fast electron injection. The maximum power-conversion efficiency 相似文献   

Co-sensitization of vertically aligned TiO2 nanotubes with two different sizes of CdSe quantum dots for broad spectrum

In order to absorb a broad spectrum in the visible region, vertically aligned TiO₂ nanotubes (TONTs) were co-sensitized by two different sizes of CdSe quantum dots (Q dots). The power conversion efficiency of co-sensitized Q dots solar cells showed 1.20%. The co-sensitization of Q dots showed higher performance than the single size sensitization. The incident photon-to-current conversion efficiency of co-sensitized TONTs electrode showed two absorption peaks at 520 and 550 nm demonstrating the sensitization of Q dots with two different sizes. This efficiency enhanced charge harvesting efficiency over the entire visible spectrum, particularly the 500–600 nm wavelength domains.     

The Electrochemical Behavior of a N‐containing Calix[4]arene Derivative

The electrochemical behavior of 5,11,17,23‐Tetrakis‐dimethylaminomethylcalix[4]arene (DCA) has been investigated by cyclic voltammetry (CV). The results show that there is an irreversible electrochemical oxidative wave with peak potential of 1.35 V in chloroform at a glassy carbon electrode. The kinetic parameters of the andic wave, such as α, n and k_s, were discussed. In addition, a new pair of quasi‐reversible redox peaks with peak potentials of 0.72 V and 0.94 V was found. It can result in DCA electrodeposition at the electrode surface. This film modified electrode was characterized by CV and electrochemical impedance spectroscopy (EIS). Moreover, the possible mechanism of electrodeposition was also discussed     

Spectroscopic investigation of defect-state emission in CdSe quantum dots

CdSe quantum dots are the most studied Cd-based quantum dots with their high quantum yield, high photostability, narrow emission band, and easy synthesis procedure. They are frequently used to develop light emitting diode (LED) due to their unique photophysical properties; however, their narrow emission band causes a challenge to design white LEDs because white light emission requires emission in multiple wavelengths with broad emission bands. Here in this study, we developed CdSe quantum dots with a narrow band-edge emission band and broad defect-state emission band through a modified two-phase synthesis method. Our results revealed that defect-state emission is directly linked to the surface of quantum dots and can be excited through exciting surfactant around the quantum dot. The effect of surfactant on emission properties of CdSe quantum dots diminished upon growing a shell around CdSe quantum dots; as a result, surface-dependent defect-state emission cannot be observed in gradient heterogeneous alloyed CdS_xSe_1-x quantum dots.     

Specifics of the spectral and luminescent properties of ensembles of colloidal quantum dots

Using colloidal solutions of ZnS-shell indium phosphide quantum dots with two average sizes of 2.1 and 3.0 nm and a size distribution variance of 10%, it has been shown that the luminescence and the luminescence excitation spectra of the colloidal quantum dots substantially depend on the wavelength of exciting light and the detection wavelength, respectively, with both the relationships being nonlinear in character, which may indicate the bimodal type of the size distribution function. Similar measurements for CdSe colloidal quantum dots with an average particle size of d_av = 2.5 nm and a variance of 6% have shown that the effect of dependence of the luminescence peak position on the excitation wavelength is manifested to a much lesser extent.     

New Copper（Ⅱ） and Nickel（Ⅱ） Complexes of 4-Morpholinoacetophenone Thiosemicarbazone： Structural, Electrochemical and Antimicrobial Studies

4-Morpholinoacetophenone thiosemicarbazone, MAPT, and its nickel（Ⅱ） and copper（Ⅱ） complexes have been prepared and characterized by elemental analysis, magnetic susceptibility, spectral methods （FT-IR, ^1H NMR） and cyclic voltammetry. Electrochemical behaviors of the complexes have been studied by cyclic voltammetry in DMF media showing metal centered reduction processes for both of them. The redox properties, nature of the electrode processes and the stability of the complexes were discussed. [Cu（MAPT）2]Cl2 complex shows Cu（Ⅱ）/Cu（Ⅰ） couple and quasi-reversible wave associated with the Cu（Ⅲ）/Cu（Ⅱ） process. The reduction/oxidation potential values depend on the structures of complexes. Also, the antimicrobial activities of these complexes were determined against S. aureus, E. coli and B. subtilis.     

Adjusting the Reduction Potential of Electrons by Quantum Confinement for Selective Photoreduction of CO2 to Methanol

The production of CH₃OH from the photocatalytic CO₂ reduction reaction (PCRR) presents a promising route for the clean utilization of renewable resources, but charge recombination, an unsatisfying stability and a poor selectivity limit its practical application. In this paper, we present the design and fabrication of 0D/2D materials with polymeric C₃N₄ nanosheets and CdSe quantum dots (QDs) to enhance the separation and reduce the diffusion length of charge carriers. The rapid outflow of carriers also restrains self‐corrosion and consequently enhances the stability. Furthermore, based on quantum confinement effects of the QDs, the energy of the electrons could be adjusted to a level that inhibits the hydrogen evolution reaction (HER, the main competitive reaction to PCRR) and improves the selectivity and activity for CH₃OH production from the PCRR. The band structures of photocatalysts with various CdSe particle sizes were also investigated quantitatively to establish the relationship between the band energy and the photocatalytic performance.