Unexpected Factors Affecting the Kinetics of Guest Molecule Release from Investigation of Binary Chemical Systems Trapped in a Single Void of Mesoporous Silica Particles

In this work, we present results for loading of well-defined binary systems (cocrystal, solid solution) and untreated materials (physical mixtures) into the voids of MCM-41 mesoporous silica particles employing three different filling methods. The applied techniques belong to the group of “wet methods” (diffusion supported loading – DiSupLo ) and “solvent-free methods” (mechanical ball-mill loading – MeLo , thermal solvent free – TSF ). As probes for testing the guest1-guest2 interactions inside the MCM-41 pores we employed the benzoic acid ( BA ), perfluorobenzoic acid ( PFBA ), and 4-fluorobenzoic acid ( 4-FBA ). The guests intermolecular contacts and phase changes were monitored employing magic angle spinning (MAS) NMR Spectroscopy techniques and powder X-ray diffraction (PXRD). Since mesoporous silica materials are commonly used in drug delivery system research, special attention has been paid to factors affecting guest release kinetics. It has been proven that not only the content and composition of binary systems, but also the loading technique have a strong impact on the rate of guests release. Innovative methods of visualizing differences in release kinetics are presented.     

Adsorption studies and release of selected dyes from functionalized mesoporous MCM-41 silica

Functionalized mesoporous MCM-41 silica was subjected to adsorption and release studies of encapsulated guest molecules of three chosen dyes. These mesoporous systems were composed of three different capping reagents introduced by grafting method on the silica surface to control the release of dye molecules at two different pH values. The amounts of dyes adsorbed on the silica surface were measured using ultraviolet-visible (UV-VIS) spectrophotometry. The efficiency of grafting was calculated on the basis of differential thermal analysis (TG) results and elemental analysis. The release profiles were determined for all obtained systems using USP Dissolution Apparatus 2. Adsorption of the two azo dyes used was the most efficient after the positively charged functionalization and lower after functionalization with neutral and negatively charged capping reagents, while the phthalocyanine dye adsorption was almost functionalization-independent. Grafting efficiency was the highest for neutral capping reagent and much lower for electrically charged molecules of other reagents. Release studies showed clearly that desorption was pH-dependent for azo dyes and pH independent for Alcian Blue. The adsorption and release seem to be connected with the electrical charge of all constituents of these systems. Results obtained can be used for further analysis of different electrically charged molecules.      

Biotin–Avidin as a Protease‐Responsive Cap System for Controlled Guest Release from Colloidal Mesoporous Silica

Tell your guests when it's time to go : When avidin caps are attached to biotinylated colloidal mesoporous silica, the four subunits of the protein avidin can each bind to a biotin moiety attached to the surface (see picture). The resulting material is a promising candidate for the design of smart detergents or drug‐delivery systems. The caps can be opened to release guest molecules by controlled enzymatic hydrolysis of the protein.

     

Synthesis of Multifunctional Metal‐ and Metal Oxide Core@Mesoporous Silica Shell Structures by Using a Wet Chemical Approach

We demonstrate a facile wet chemical approach for fabricating spherical metal/metal‐oxide core@mesoporous silica shell hybrid nanoparticles with different core and shell thicknesses. Vertically aligned mesoporous silica (mSiO₂) shells were fabricated over the pre‐synthesized spherical SiO₂ nanoparticles through a three‐step strategy: 1) synthesis of core materials, 2) covering the core with an organic–inorganic composite layer, and 3) removing the organic template through calcinations in air. The mechanisms of hybrid structure formation are proposed. The multifunctional nature of the hybrid structures could be induced by incorporating guest ions/molecules, such as Ag, Mn, and TiO₂, into the pores of an mSiO₂ shell. Mn and TiO₂ cluster‐ incorporated composite structures have been tested to be antioxidizing agents and effective photocatalysts through electron spin resonance, radical scavenging tests, and the photocatalytic degradation of rhodamine B. The possibility of incorporating several hetero‐element guest clusters in these mesoporous composite particles makes them highly attractive for multifunctional applications.     

Photoresponsive Cyclodextrin‐Covered Nanocontainers and Their Sol‐Gel Transition Induced by Molecular Recognition

Springing the trap : Cyclodextrin‐covered mesoporous silica nanoparticles with photocleavable linkers exhibit photoinduced release characteristics and a sol–gel transition that is induced by molecular recognition (see picture). Upon exposure to UV light, the guest molecules were released from the pore by removal of the CD “gatekeeper”, which was linked on the surface of the silica nanoparticle through a photocleavable o‐nitrobenzyl ester moiety.

     

Diffusion of oriented single molecules with switchable mobility in networks of long unidimensional nanochannels

Single dye molecules incorporated into a mesoporous matrix can act as highly sensitive reporters of their environment. Here, we use single TDI molecules incorporated as guests into hexagonal mesoporous films containing highly structured domains. The dye molecules allow us to map the size of these domains which can extend to over 100 microm. Investigation of the translational and orientational dynamics via single molecule fluorescence techniques gives structural as well as dynamical information about the host material. In an air atmosphere, the guest molecules show no movement but perfect orientation along the pore direction. The diffusion of the TDI molecules can be induced by placing the mesoporous film in a saturated atmosphere of chloroform. In single molecule measurements with very high positioning accuracy (down to 2-3 nm) the movement of molecules could be observed even between neighboring channels. This reveals the presence of defects like dead ends closing the pores or small openings in the silica walls between neighboring channels, where molecules can change from one channel to the next. A statistical analysis demonstrates that the diffusion of TDI in the mesoporous film cannot be described with a 1D-random diffusion but is more complicated due to the presence of adsorption sites in which the TDI molecules can be occasionally trapped.     

Crystalline Capsules: Metal–Organic Frameworks Locked by Size‐Matching Ligand Bolts

Metal–organic frameworks (MOFs) are shown to be good examples of a new class of crystalline porous materials for guest encapsulation. Since the encapsulation/release of guest molecules in MOF hosts is a reversible process in nature, how to prevent the leaching of guests from the open pores with minimal and nondestructive modifications of the structure is a critical issue. To address this issue, we herein propose a novel strategy of encapsulating guests by introducing size‐matching organic ligands as bolts to lock the pores of the MOFs through deliberately anchoring onto the open metal sites in the pores. Our proposed strategy provides a mechanical way to prevent the leaching of guests and thereby has less dependence on the specific chemical environment of the hosts, thus making it applicable for a wide variety of existing MOFs once the size‐matching ligands are employed.     

Signal‐Induced Release of Guests from a Photolatent Metal–Phenolic Supramolecular Cage and Its Hybrid Assemblies

The coordination chemistry of plant polyphenols and metal ions can be used for coating various substrates and for creating modular superstructures. We herein explored this chemistry for the controlled release of guests from mesoporous silica nanoparticles (MSNs). The selective adsorption of tannic acids (TAs) on MSN silica walls opens the MSN mesoporous channels without disturbing mass transport. The channel may be closed by the coordination of TA with Cu^II ions. Upon exposure to light, photolysis of Trojan horse guests (photoacid generators, PAGs) leads to acid generation, which enables the release of payloads by decomposing the outer coordination shell consisting of TA and Cu^II. We also fabricated a modular assembly of MSNs on glass substrates. The photoresponsive release characteristics of the resulting film are similar to those of the individual MSNs. This method is a fast and facile strategy for producing photoresponsive nanocontainers by non‐covalent engineering of MSN surfaces that should be suitable for various applications in materials science.     

Novel molecularly hybridized polyethylene/silica composite materials: Polymerization of ethylene with supported titanocenes by mesoporous silicates

A novel molecularly hybridized polyethylene/silica composite thin film was obtained by the gas‐phase polymerization of ethylene with a titanocene‐mounted mesoporous silica layer on a mica plate with mesoscopic pores arranged on the film surface. However, the use of titanocene‐mounted hexagonal domains of mesoporous silica on a glass plate for the gas‐phase polymerization of ethylene resulted in the formation of an islanded polyethylene/silica hybridized material. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4821–4825, 2000     

pH响应的介孔二氧化硅纳米颗粒的制备及可控释放

选择带负电荷且溶解度和分子结构对pH值非常敏感的聚丙烯酸作为封堵分子, 采用静电吸附的修饰方法, 制备了pH响应的MCM-41型介孔二氧化硅纳米颗粒. 利用高倍透射电子显微镜(TEM)、 X射线衍射(XRD)、 傅里叶变换红外光谱(FTIR)及比表面积分析等手段表征了介孔二氧化硅纳米颗粒的物理化学性质. 以联钌吡啶染料分子作为模式客体分子, 研究了pH调控下的模式客体分子在介孔二氧化硅纳米颗粒中的包裹及释放行为. 结果表明, 该介孔二氧化硅纳米颗粒对pH具有很好的响应性; 在近中性条件下, 带正电的二氧化硅纳米颗粒通过静电吸附作用吸附带负电的聚丙烯酸, 导致介孔封堵, 使包载的染料分子几乎无释放; 客体分子的释放率随着pH值的降低而升高, 当pH≤5时, 染料分子显著释放, pH=1时客体分子的释放率高达98％, 可以实现对包载客体分子的控制释放. 该pH响应的介孔二氧化硅纳米颗粒载体具有制备简便、 价格低廉和包载量大等优点, 有望应用于药物的控制释放.     

Highly Emissive Nanostructured Thin Films of Organic Host–Guests for Energy Conversion

All‐organic nanostructured host–guest materials (see picture) show enhanced, tunable fluorescence due to a high concentration of dyes with controlled spatial and geometrical organization that allows controlled resonant energy transfer. Homogeneous films of deoxycholic acid host–guests, provide coatings that convert near‐UV light into blue light with an efficiency higher than that of the standard polymeric blends.

     

Synthesis of multifunctional metal- and metal oxide core@mesoporous silica shell structures by using a wet chemical approach

We demonstrate a facile wet chemical approach for fabricating spherical metal/metal-oxide core@mesoporous silica shell hybrid nanoparticles with different core and shell thicknesses. Vertically aligned mesoporous silica (mSiO(2) ) shells were fabricated over the pre-synthesized spherical SiO(2) nanoparticles through a three-step strategy: 1)?synthesis of core materials, 2)?covering the core with an organic-inorganic composite layer, and 3)?removing the organic template through calcinations in air. The mechanisms of hybrid structure formation are proposed. The multifunctional nature of the hybrid structures could be induced by incorporating guest ions/molecules, such as Ag, Mn, and TiO(2) , into the pores of an mSiO(2) shell. Mn and TiO(2) cluster- incorporated composite structures have been tested to be antioxidizing agents and effective photocatalysts through electron spin resonance, radical scavenging tests, and the photocatalytic degradation of rhodamine B. The possibility of incorporating several hetero-element guest clusters in these mesoporous composite particles makes them highly attractive for multifunctional applications.     

Platinum Films with Controlled 3‐Dimensional Nanoscopic Morphologies and Their Effects on Surface Enhanced Raman Scattering

The synthesis of Pt thin films with a controlled nanoscopic architecture that can support surface enhanced Raman scattering (SERS) is reported. The syntheses are achieved by replicating the pores of a type of mesoporous silica thin film whose pore structure could be described as a regular array of vertical channels of ～9 nm in diameter and their interconnections, forming a 3‐dimensional pore network. Electrochemical deposition into the pores followed by the removal of the templates produced Pt films composed of arrays of vertically standing Pt nanorods with narrow gaps between them. The 3‐dimensional nanostructure increases the surface area and enables the Pt film to absorb visible light. SERS studies of rhodamine 6G and benzenethiol on such Pt films as substrates reveals that the control of the nanostructure is critical for the SERS effect.     

Nonaggregated Zinc Phthalocyanine in Mesoporous Nanocrystalline TiO2 Thin Films

Summary: A simple sonochemical approach has been successfully developed to deposit poorly dissolved phthalocyanine dyes onto the surface of a highly‐ordered mesoporous nanostructured TiO₂ thin film. The aggregation‐free phthalocyanines are effectively encapsulated and stabilized in the nanopore arrays of the zeolite‐like mesoporous nanocrystalline TiO₂ thin film. Highly dispersed dye∥TiO₂ heterojunction arrays with a large contact area can be obtained by using this interesting approach.

The incorporation of phthalocyanine dyes into the surface of a highly‐ordered mesoporous nanostructured TiO₂ thin film, a potential photocatalyst.     

Mesoporous Nanofibers from Dual Structure‐Directing Agents in AAO: Mesostructural Control and their Catalytic Applications

Control yourself! The mesoporous silica nanofibers (MSNFs) from dual structure‐directing agents were fabricated inside the pores of porous alumina (AAO, see figure) by using vapor phase synthesis. The pore structures could be controlled to form a range of structures from mesocellular foams to cylindrical mesopores with long‐range order by adding cationic cosurfactants.

     

Signal-Induced Release of Guests from a Photolatent Metal–Phenolic Supramolecular Cage and Its Hybrid Assemblies

The coordination chemistry of plant polyphenols and metal ions can be used for coating various substrates and for creating modular superstructures. We herein explored this chemistry for the controlled release of guests from mesoporous silica nanoparticles (MSNs). The selective adsorption of tannic acids (TAs) on MSN silica walls opens the MSN mesoporous channels without disturbing mass transport. The channel may be closed by the coordination of TA with Cu^II ions. Upon exposure to light, photolysis of Trojan horse guests (photoacid generators, PAGs) leads to acid generation, which enables the release of payloads by decomposing the outer coordination shell consisting of TA and Cu^II. We also fabricated a modular assembly of MSNs on glass substrates. The photoresponsive release characteristics of the resulting film are similar to those of the individual MSNs. This method is a fast and facile strategy for producing photoresponsive nanocontainers by non-covalent engineering of MSN surfaces that should be suitable for various applications in materials science.     

Molecular organization of hydrophobic molecules and co-adsorbed water in SBA-15 ordered mesoporous silica material

The purpose of this study was to improve our understanding of the molecular organization of hydrophobic guest molecules in the presence of co-adsorbed water inside SBA-15 ordered mesoporous silica material. Understanding this adsorption competition is essential in the development of applications of controlled adsorption and desorption. The poorly water soluble drug compound itraconazole and the fluorescent probe Nile red were selected for the study. The interaction between itraconazole and SBA-15 was investigated using FT-IR, (1)H MAS NMR and (29)Si MAS NMR spectroscopy, by determination of adsorption isotherms and release kinetics in simulated gastric fluid. The distribution and migration of the hydrophobic fluorescent probe Nile red was visualized in situ using confocal fluorescence microscopy. For both molecules, there was a pronounced influence of the co-adsorbed water on adsorption, hydrophobic aggregation and migration in SBA-15 pores. These insights contribute to the development of practical methods for loading ordered mesoporous silica materials with hydrophobic molecules.     

Pillar[5]arene‐Diketopyrrolopyrrole Fluorescent Copolymer: A Promising Recognition and Adsorption Material for Adiponitrile by Selective Formation of a Conjugated Polypseudorotaxane

Conjugated pillar[5]arene‐diketopyrrolopyrrole copolymer ( P1 ) is synthesized by the copolymerization of a difunctionalized pillar[5]arene and a diketopyrrolopyrrole‐based monomer, which shows large extinction coefficients (1.1 × 10⁴m ^–1 cm^–1) at 519 nm and strong emission at 587 nm. P1 exhibits very strong host–guest binding affinity towards adiponitrile but low binding affinity towards 1,4‐dihalobutane and 1,4‐bis(imidazol‐1‐yl)butane. Such an enhanced selectivity is first found in the polypseudorotaxane between pillararene and neutral guests in organic solution and is successfully used for the recognition and adsorption of adiponitrile by the formation of a P1 ‐adiponitrile polypseudorotaxane.

     

A light-responsive reversible molecule-gated system using thymine-modified mesoporous silica nanoparticles

In this paper, a reversible light-responsive molecule-gated system based on mesoporous silica nanoparticles (MSN) functionalized with thymine derivatives is designed and demonstrated. The closing/opening protocol and release of the entrapped guest molecules is related by a photodimerization-cleavage cycle of thymine upon different irradiation. In the system, thymine derivatives with hydrophilicity and biocompatibility were grafted on the pore outlets of MSN. The irradiation with 365 nm wavelength UV light to thymine-functionalized MSN led to the formation of cyclobutane dimer in the pore outlet, subsequently resulting in blockage of pores and strongly inhibiting the diffusion of guest molecules from pores. With 240 nm wavelength UV light irradiation, the photocleavage of cyclobutane dimer opened the pore and allowed the release of the entrapped guest molecules. As a proof-of-the-concept, Ru(bipy)(3)(2+) was selected as the guest molecule. Then the light-responsive loading and release of Ru(bipy)(3)(2+) were investigated. The results indicated that the system had an excellent loading amount (53 μmol g(-1) MSN) and controlled release behavior (82% release after irradiation for 24 h), and the light-responsive loading and release procedure exhibited a good reversibility. Besides, the light-responsive system loaded with Ru(bipy)(3)(2+) molecule could also be used as a light-switchable oxygen sensor.     

Bright photoluminescent hybrid mesostructured silica nanoparticles

Bright photoluminescent mesostructured silica nanoparticles were synthesized by the incorporation of fluorescent cyanine dyes into the channels of MCM-41 mesoporous silica. Cyanine molecules were introduced into MCM-41 nanoparticles by physical adsorption and covalent grafting. Several photoluminescent nanoparticles with different organic loadings have been synthesized and characterized by X-ray powder diffraction, high resolution transmission electron microscopy and nitrogen physisorption porosimetry. A detailed photoluminescence study with the analysis of fluorescence lifetimes was carried out to elucidate the cyanine molecules distribution within the pores of MCM-41 nanoparticles and the influence of the encapsulation on the photoemission properties of the guests. The results show that highly stable photoluminescent hybrid materials with interesting potential applications as photoluminescent probes for diagnostics and imaging can be prepared by both methods.