NO Chemisorption on Pt(111), Rh/Pt(111), and Pd/Pt(111)

The chemisorption of NO on clean Pt(111), Rh/Pt(111) alloy, and Pd/Pt(111) alloy surfaces has been studied by first principles density functional theory (DFT) computations. It was found that the surface compositions of the surface alloys have very different effects on the adsorption of NO on Rh/Pt(111) versus that on Pd/Pt(111). This is due to the different bond strength between the two metals in each alloy system. A complex d-band center weighting model developed by authors in a previous study for SO2 adsorption is demonstrated to be necessary for quantifying NO adsorption on Pd/Pt(111). A strong linear relationship between the weighted positions of the d states of the surfaces and the molecular NO adsorption energies shows the closer the weighted d-band center is shifted to the Fermi energy level, the stronger the adsorption of NO will be. The consequences of this study for the optimized design of three-way automotive catalysts, (TWC) are also discussed.     

贵金属原子在CeO2(111)表面吸附的密度泛函理论研究

利用密度泛函理论系统研究了贵金属原子(Au、Pd、Pt和Rh)在CeO₂(111)表面的吸附行为。结果表明,Au吸附在氧顶位最稳定,Pd、Pt倾向吸附于氧桥位,而Rh在洞位最稳定。当金属原子吸附在氧顶位时,吸附强度依次为Pt > Rh > Pd > Au。Pd、Pt与Rh吸附后在Ce 4f、O 2p电子峰间出现掺杂峰;Au未出现掺杂电子峰,其d电子峰与表面O 2p峰在-4～-1 eV重叠。态密度分析表明,Au吸附在氧顶位、Pd与Pt吸附在桥位、Rh吸附在洞位时,金属与CeO₂(111)表面氧原子作用较强,这与Bader电荷分析结果相一致。     

Configurational correlations in the coverage dependent adsorption energies of oxygen atoms on late transition metal fcc(111) surfaces

The coverage dependence of oxygen adsorption energies on the fcc(111) surfaces of seven different transition metals (Rh, Ir, Pd, Pt, Cu, Au, and Ag) is demonstrated through density functional theory calculations on 20 configurations ranging from one to five adsorption sites and coverages up to 1 ML. Atom projected densities of states are used to demonstrate that the d-band mediated adsorption mechanism is responsible for the coverage dependence of the adsorption energies. This common bonding mechanism results in a linear correlation that relates the adsorption energies of each adsorbate configuration across different metal surfaces to each other. The slope of this correlation is shown to be related to the characteristics of the valence d-orbitals and band structure of the surface metal atoms. Additionally, it is shown that geometric similarity of the configurations is essential to observe the configurational correlations.     

The relationship between adsorption energies of methyl on metals and the metallic electronic properties: a first-principles DFT study

A theoretical study of CH3 adsorbed on the (111) surface of some transition and noble metal surfaces M (M = Cu, Ni, Rh, Pt, Pd, Ag, Au) and on the Fe(100) is presented. We find that the hollow site is preferred more than the top one for Fe, Ni, Rh, and Cu, but it is the other way for Pt, Pd, Au, and Ag. In addition, a good linear relationship was observed between the chemisorption energy and d-band center for Group VIII metals or the square of the coupling matrix element for Group IB metals at the hollow site. Interestingly, with a detailed comparison of the adsorption energies at the top and hollow sites, we find that the adsorption energies among each group are very similar on the top site, which supports the theoretical model of Hammer and Norskov that the coupling between the HOMO of adsorbate and sp states of the metal is dominant and almost equal, and that the second coupling to the d-band contributes less but reflects the change of the adsorption energy. It confirms that the coupling to the d band comprises two opposite factors, that is, the d-band center was attractive and the square of the coupling matrix element was repulsive, such that the contributions from the two factors can counteract each other at the top site.     

氢原子在Pt及Pt系双金属催化表面吸附的密度泛函理论研究

采用密度泛函理论(dFT)考察了Pt(100)、(110)、(111)三种表面氢原子的吸附行为, 计算了覆盖度为0.25 ML时氢原子在Pt 三种表面和M-Pt(111)双金属(M=Al, Fe, Co, Ni, Cu, Pd)上的最稳定吸附位、表面能以及吸附前后金属表面原子层间弛豫情况. 分析了氢原子在不同双金属表面吸附前后的局域态密度变化以及双金属表面d 带中心偏离费米能级的程度并与氢吸附能进行了关联. 计算结果表明, 在Pt(100), Pt(110)和Pt(111)表面, 氢原子的稳定吸附位分别为桥位、短桥位和fcc 穴位. 三种表面中以Pt(111)的表面能最低, 结构最稳定. 氢原子在不同M-Pt(111)双金属表面上的最稳定吸附位均为fcc 穴位, 其中在Ni-Pt 双金属表面的吸附能最低, Co-Pt 次之. 表明氢原子在Ni-Pt 和Co-Pt 双金属表面的吸附最稳定. 通过对氢原子在M-Pt(111)双金属表面吸附前后的局域态密度变化的分析, 验证了氢原子吸附能计算结果的准确性. 掺杂金属Ni、Co、Fe 的3d-Pt(111)双金属表面在吸附氢原子后发生弛豫, 第一层和第二层金属原子均不同程度地向外膨胀. 此外, 3d金属的掺入使得其对应的M-Pt(111)双金属表面d带中心与Pt 相比更靠近费米能级, 吸附氢原子能力增强, 表明3d-Pt系双金属表面有可能比Pt具有更好的脱氢活性.     

Chemical composition and reactivity of water on hexagonal Pt-group metal surfaces

The dissociation behaviour and valence-electronic structure of water adsorbed on clean and oxygen-covered Ru{0001}, Rh{111}, Pd{111}, Ir{111} and Pt{111} surfaces has been studied by high-resolution X-ray photoelectron spectroscopy with the aim of identifying similarities and trends within the Pt-group metals. On average, we find higher reactivity for the 4d metals (Ru, Rh, Pd) as compared to 5d (Ir, Pt), which is correlated with characteristic shifts in the 1b(1) and 3a(1) molecular orbitals of water. Small amounts of oxygen (< 0.2 ML) induce dissociation of water on all five surfaces, for higher coverages (> 0.25 ML) only intact water is observed. Under UHV conditions these higher coverages can only be reached on the 4d metals, the 5d metals are, therefore, not passivated.     

Ab initio studies of a water layer at transition metal surfaces

This paper presents a detailed study of a water adlayer adsorbed on Pt(111) and Rh(111) surfaces using periodic density functional theory methods. The interaction between the metal surface and the water molecules is assessed from molecular dynamics simulation data and single point electronic structure calculations of selected configurations. It is argued that the electron bands around the Fermi level of the metal substrate extend over the water adlayer. As a consequence in the presence of the water layer the surface as a whole still maintains its metallic conductivity-a result of a crucial importance for understanding the process of electron transfer through the water/metal interface and electrochemical reactions in particular. Our results also indicate that there exists a weak bond between the hydrogen of the water and the Rh metal atoms as opposed to the widespread (classical) models based on purely repulsive interaction. This suggests that the commonly used classical interactions potentials adopted for large scale molecular dynamics simulations of water/metal interfaces may need revision. Two adsorption models of water on transition metals with the OH bonds pointing towards or away of the surface are also examined. It is shown that due to the very close values of their adsorption energies one should consider the real structure of water on the surface as a mixture of these simple "up" and "down" models. A model for the structure of the adsorbed water layer on Rh(111) is proposed in terms of statistical averages from molecular dynamics simulations.     

噻吩在M(111)(M=Pd,Pt, Au)表面的吸附

采用密度泛函理论(DFT), 选取DMol³程序模块, 对噻吩在M(111) (M=Pd, Pt, Au)表面上的吸附行为进行了探讨. 通过对噻吩在不同底物金属上的吸附能、吸附构型、Mulliken 电荷布居、差分电荷密度以及态密度的分析发现, 噻吩在Pd(111)面上的吸附能最大, Pt(111)面次之, Au(111)面最小. 吸附后, 噻吩在Au(111)面上的构型几乎保持不变, 最终通过S端倾斜吸附于top 位; 噻吩在Pd(111)及Pt(111)面上发生了折叠与变形, 环中氢原子向上翘起, 最终通过环平面平行吸附于hollow 位. 此外, 噻吩环吸附后芳香性遭到了破坏, 环中碳原子发生sp³杂化, 同时电子逐渐由噻吩向M(111)面发生转移, M(111)面上的部分电子也反馈给了噻吩环中的空轨道, 这种协同作用最终导致了噻吩分子稳定吸附于M(111)面.     

Adsorption Energetics of NO and CO on Pt(111)

The adsorption energetics of NO and CO on Pt(111) are studied using an ab initio embedding theory. The Pt(111) surface is modeled as a three-layer, 28-atom cluster with the Pt atoms fixed at bulk lattice sites. Molecular NO is adsorbed at high symmetry sites on Pt(111), with the fcc threefold site energetically more favorable than the hcp threefold and bridge sites. The calculated adsorption energy at the fcc threefold site is 1.90 eV, with an N-surface distance of 1.23 Å. The NO molecular axis is perpendicular to the Pt(111) surface. Tilting the O atom away from the surface normal destablizes adsorbed NO at all adsorption sites considered. On-top Pt adsorption has been ruled out. The Pt(111) potential surface is very flat for CO adsorption, and the diffusion barriers from hcp to fcc sites are 0.03 eV and less than 0.06 eV across the bridge and the atop sites, respectively. Calculated adsorption energies are 1.67, 1.54, 1.51, and 1.60 eV at the fcc threefold, hcp threefold, bridge, and atop sites, respectively. Calculated C-surface distances are 1.24 Å at the fcc threefold site and 1.83 Å at the atop site. It is concluded that NO and CO adsorption energetics and geometries are different on Pt(111).     

Density functional theory study of CHx (x=1-3) adsorption on clean and CO precovered Rh(111) surfaces

CH(x) (x=1-3) adsorptions on clean and CO precovered Rh(111) surfaces were studied by density functional theory calculations. It is found that CH(x) (x=1-3) radicals prefer threefold hollow sites on Rh(111) surfaces, and the bond strength between CH(x) and Rh(111) follows the order of CH(3)相似文献   

Energetics of C–C Bond Scission in Ethane Hydrogenolysis: A Theoretical Study of Possible Intermediates and Reaction Pathways

C–C bond scission steps, which are often considered as rate-determining in ethane hydrogenolysis, are studied by the Unity Bond Index–Quadratic Exponential UBI–QEP method. The binding energies of atomic carbon with Group VIII and IB metal surfaces Ni(111), Pd(111), Pt(111), Rh(111), Ru(001), Ir(111), Fe(110), Cu(111), and Au(111) are estimated using experimental data on the adsorption of various species on these surfaces. These estimates are corrected using data from density functional theory (DFT) on the adsorption heats of the CH _x species. Metal surfaces are arranged in the following series according to the binding strength of a carbon atom: Cu(111) < Au(111) < Pd(111) < Ru(001) Pt(111) < Ni(111) Rh(111) < Ir(111) < Fe(110). The values of chemisorption heats range from 121 kcal/mol for Au(111) to 193 kcal/mol for Fe(110). The activity of these surfaces toward C–C bond scission increases in the same series. The results of this work suggest that the most probable C–C bond scission precursors are ethyl, ethylidyne, adsorbed acetylene, CH₂CH, CH₂C, and CHC. Theoretical data obtained by different methods are compared and found to agree well with each other. An overview of experimental data on ethane hydrogenolysis mechanisms is given.     

Characterization of methoxy adsorption on some transition metals: a first principles density functional theory study

Based on the gradient-density functional theory, calculation results of methoxy adsorption on Au(111), Ag(111), Cu(111), Pt(111), Pd(111), Ni(111), Rh(111), and Fe(100) surfaces are presented, and a consistent picture for some key physical properties determining the reactivity of metals appears. These eight metals belong to two groups: either with filled d electrons (group IB) or with unfilled but more than half filled d electrons (group VIII). The calculated adsorption energies are quite in agreement with the experimental data as well as the previous theoretical calculation results. Importantly, using the analysis of B. Hammer and J. K. Norskov, Nature (London) 376, 232 (1995) and in Chemisorption and Reactivity on Supported Clusters and Thin Films, edited by R. M. Lambert and G. Pacchioni (Kluwer Academic, Dordrecht, 1997), pp. 285-351, the binding energies have selectively been linearly correlated to the d-band center and to the size of the metal d-band orbital overlapping with the adsorbate (coupling matrix element) for these two groups of metals. And by analyzing the nature of the adsorption bonding, the possible reason of this difference is suggested.     

Computational study of the adsorption and dissociation of phenol on Pt and Rh surfaces

The adsorption of phenol on flat and stepped Pt and Rh surfaces and the dissociation of hydrogen from the hydroxyl group of phenol on Pt(111) and Rh(111) were studied by density functional calculations. On both Pt(111) and Rh(111), phenol adsorbs with the aromatic ring parallel to the surface and the hydroxyl group tilted away from the surface. Furthermore, adsorption on stepped surfaces was concluded to be unfavourable compared to the (111) surfaces due to the repulsion of the hydroxyl group from the step edges. Transition state calculations revealed that the reaction barriers, associated with the dissociation of phenol into phenoxy, are almost identical on Pt and Rh. Furthermore, the oxygen in the dissociated phenol is strongly attracted by Rh(111), while it is repelled by Pt(111).     

噻吩在M(111)(M=Pd,Pt,Au)表面的吸附(英文)

采用密度泛函理论(DFT),选取DMol3程序模块,对噻吩在M(111)(M=Pd,Pt,Au)表面上的吸附行为进行了探讨.通过对噻吩在不同底物金属上的吸附能、吸附构型、Mulliken电荷布居、差分电荷密度以及态密度的分析发现,噻吩在Pd(111)面上的吸附能最大,Pt(111)面次之,Au(111)面最小.吸附后,噻吩在Au(111)面上的构型几乎保持不变,最终通过S端倾斜吸附于top位;噻吩在Pd(111)及Pt(111)面上发生了折叠与变形,环中氢原子向上翘起,最终通过环平面平行吸附于hollow位.此外,噻吩环吸附后芳香性遭到了破坏,环中碳原子发生sp3杂化,同时电子逐渐由噻吩向M(111)面发生转移,M(111)面上的部分电子也反馈给了噻吩环中的空轨道,这种协同作用最终导致了噻吩分子稳定吸附于M(111)面.     

Time-lapse STM studies of diastereomeric cinchona alkaloids on platinum metals

The adsorption of cinchonidine (CD) and cinchonine (CN) on Pt(111) and Pd(111) single crystals has been investigated by means of scanning tunneling microscopy (STM) in an ultrahigh vacuum system. In time-lapse series the mobilities of different adsorption species have been determined on a single molecule basis and with varying hydrogen background pressures in the system. The diastereomeric cinchona alkaloids, CD and CN, which are widely used as chiral modifiers of platinum group metals in catalytic enantioselective hydrogenation, showed similar adsorption modes and diffusion behavior on Pt(111), except that the flatly adsorbed CN molecules which were free (not in a dimer/cluster) were significantly more mobile than their CD analogues. CD adsorbed on Pd(111) showed similar adsorption modes as observed on Pt(111) but at considerably higher mobility of the flatly absorbed species already in the low-pressure region. The observed adsorption behaviors are discussed in the context of independent ATR-IR measurements and theoretical calculations. Special emphasis is put on the nonlinear effect observed in hydrogenation reactions with CD/CN mixtures. Our observations corroborate that this effect is mainly a consequence of the different adsorption strengths of CD and CN on Pt.     

Effect of intrinsic properties of metals on the adsorption behavior of molecules: benzene adsorption on Pt group metals

Investigation of benzene adsorption on different metal surfaces closer to a practical system appears to be a very important intermediate stage to utilize the conclusion obtained on single-crystal surfaces. In this paper, we studied the electrochemical adsorption behaviors of benzene on roughened Pt group electrodes using surface enhanced Raman spectroscopy (SERS). The effects of potential, surface roughness, and benzene concentration were investigated. Significant difference in surface Raman spectra of benzene on Ru, Rh, Pd, and Pt surfaces were found. On Pt surfaces, the parallel-chemisorbed benzene, the vertical dissociated chemisorbed benzene, and the physisorbed benzene were observed, evidenced by the ring vibration mode appearing at 872, 1012, and 991 cm(-1), respectively. On Pd, only parallel-chemisorbed benzene and physisorbed benzene were found. On Rh and Ru, the SERS signals were mainly from the parallel-chemisorbed benzene, with an extremely weak signal from the physisorbed benzene. The potential dependent study reveals that the parallel-chemisorbed species interacts strongest with the substrate, while the physisorbed species can be easily removed at positive potentials. The models for the adsorbed benzene were given to account for the different types of benzene on these Pt group metals. The difference in the atomization heat of the four metals was used to interpret the different interaction strength of benzene with Pt group metals.     

Theoretical study of CO and NO chemisorption on RhCu(111) surfaces

A systematic density functional theory study using periodic models is presented concerning the chemisorption of CO and NO on various sites of RhCu(111) surfaces. The properties of the adsorbed molecules on various mono- and bimetallic sites of these alloy surfaces have been obtained and compared to those corresponding to the pure Rh(111) and Cu(111) surfaces. It is shown that that the interaction of small probe molecules such as CO or NO on RhCu alloys is essentially dominated by the atomic nature of the surface active site with little influence of the rest of the metallic system. Moreover, it is suggested that it is possible to control the adsorption site of these molecules by appropriate choice of the surface composition.     

A theoretical study of the effects of transition metal dopants on the adsorption and dissociation of hydrogen on nickel clusters

The structure, stability, adsorption, and dissociation of H₂ on nickel clusters doped with late transition metals were investigated using density functional theory with the BP86 functional. Molecular hydrogen physisorption occurred at a vertex atom with a low coordination number. Charge transfer between clusters and the H₂ molecule stabilized the physisorption. The chemisorption of H₂ occurred at the bridge sites, without any structural or spin change of the clusters. Among the pentamer clusters, Cd, Zn, and Au had the lowest chemisorption energies, while Ir and Pt had higher chemisorption energies for hydrogen. The computed reaction energies and activation barriers for the dissociation mechanism showed that dopants such as Rh, Pd, Pt, and Au have endothermic reaction energies and low activation barriers. This facilitates the reversible adsorption/dissociation of the H₂ molecule on these metal‐doped clusters. The dopant atoms play a major role in modulating the physisorption, chemisorption, and dissociation mechanism of H₂ on nickel clusters. © 2013 Wiley Periodicals, Inc.     

Tellurium adatoms as an in-situ surface probe of (111) two-dimensional domains at platinum surfaces

Irreversibly adsorbed tellurium has been studied as a probe to quantify ordered domains in platinum electrodes. The surface redox process of adsorbed tellurium on the Pt(111) electrode and Pt(111) stepped surfaces takes place around 0.85 V in a well-defined peak. The behavior of this redox process on the Pt(111) vicinal surfaces indicates that the tellurium atoms involved in the redox process are only those deposited on the (111) terrace sites. Moreover, the corresponding charge density is proportional to the number of sites on (111) ordered domains (terraces) that are, at least, three atoms wide. Hence, this charge density can be used to measure the number of (111) terrace sites on any given platinum sample. Structural information about tellurium adsorption is obtained from atomic-resolution STM images for the Pt(111) and Pt(10, 10, 9) electrodes. A rectangular structure (2 x radical 3) and a compact hexagonal structure (11 x 8) were identified. However, the redox peak for adsorbed tellurium on (100) domains at 1.03 V overlaps with peaks arising from steps and (110) sites. Therefore, it cannot be used without problems for the determination of (100) sites on a platinum sample. On the (100) terraces, the surface structure of the adsorbed tellurium is c(2 x 2), as revealed by STM. Finally, tellurium irreversible adsorption has been used to estimate the number of (111) ordered domains terrace sites on different polycrystalline platinum samples, and the results are compared to those obtained with bismuth irreversible adsorption.     

Adsorption and Reactions of N2O on Transition Metal Surfaces

Data on the interaction of nitrous oxide with polycrystalline and low-index single crystal surfaces of transition metals (Cu, Ag, Pt, Pd, Ni, W, Ir, Rh, and Ru) are reviewed. The kinetics of N₂O adsorption, desorption, and dissociation N₂O on these surfaces, as well as the energetics and mechanisms of these processes, are considered. New calculated data on the energetics of nitrous oxide transformations on (111) single crystalline transition metal surfaces are reported.