Structures of the Reactive Intermediates in Organocatalysis with Diarylprolinol Ethers

Structures of the reactive intermediates (enamines and iminium ions) of organocatalysis with diarylprolinol derivatives have been determined. To this end, diarylprolinol methyl and silyl ethers, 1 , and aldehydes, Ph? CH₂? CHO, ^tBu? CH₂? CHO, Ph? CH=CH? CHO, are condensed to the corresponding enamines, A and 3 (Scheme 2), and cinnamoylidene iminium salts, B and 4 (Scheme 3). These are isolated and fully characterized by melting/decomposition points, [α]_D, elemental analysis, IR and NMR spectroscopy, and high‐resolution mass spectrometry (HR‐MS). Salts with BF₄, PF₆, SbF₆, and the weakly coordinating Al[OC(CF₃)₃]₄ anion were prepared. X‐Ray crystal structures of an enamine and of six iminium salts have been obtained and are described herein (Figs. 2 and 4–8, and Tables 2 and 7) and in a previous preliminary communication (Helv. Chim. Acta 2008 , 91, 1999). According to the NMR spectra (in CDCl₃, (D₆)DMSO, (D₆)acetone, or CD₃OD; Table 1), the major isomers 4 of the iminium salts have (E)‐configuration of the exocyclic N?C(1′) bond, but there are up to 11% of the (Z)‐isomer present in these solutions (Fig. 1). In all crystal structures, the iminium ions have (E)‐configuration, and the conformation around the exocyclic N‐C? C‐O bond is synclinal‐exo (cf. C and L ), with one of the phenyl groups over the pyrrolidine ring, and the RO group over the π‐system. One of the meta‐substituents (Me in 4b , CF₃ in 4c and 4e ) on a 3,5‐disubstituted phenyl group is also located in the space above the π‐system. DFT Calculations at various levels of theory (Tables 3–6) confirm that the experimentally determined structures (cf. Fig. 10) are by far (up to 8.3 kcal/mol) the most stable ones. Implications of the results with respect to the mechanism of organocatalysis by diarylprolinol derivatives are discussed.     

Crystal Structures – A Manifesto for the Superiority of the Valine‐Derived 5,5‐Diphenyloxazolidinone as an Auxiliary in Enantioselective Organic Synthesis

The crystal structures of 32 derivatives of 4‐isopropyl‐5,5‐diphenyl‐1,3‐oxazolidin‐2‐one ( A and 1 – 31 ) are presented (Fig. 2 and Tables 1–3). In all but four structures, the Me₂CH group is in a disposition that mimick a Me₃C group (Figs. 3–5). The five‐membered ring shows conformations from an envelope form with the Ph₂C group out of the plane containing the other four atoms to the twist form with the twofold axis through the CO group (Fig. 6, and Table 2). In the entire series, the Me₂CH and the neighboring trans Ph group are approximately antiperiplanar (average torsion angle 155°). The structural features are used to interpret the previously observed reactivity behavior of the diphenyl‐oxazolidinone derivatives. The practical advantages of the title compound over classical Evans auxiliaries are outlined (Figs. 1 and 7, and Scheme 2): high crystallinity of all derivatives, steric protection of the CO group in the ring, excellent stereoselectivities in reactions of its derivatives, and safe preparation and easy recovery of the auxiliary.     

Stereochemical Models for Discussing Additions to α,β‐Unsaturated Aldehydes Organocatalyzed by Diarylprolinol or Imidazolidinone Derivatives – Is There an ‘(E)/(Z)‐Dilemma’?

The structures of iminium salts formed from diarylprolinol or imidazolidinone derivatives and α,β‐unsaturated aldehydes have been studied by X‐ray powder diffraction (Fig. 1), single‐crystal X‐ray analyses (Table 1), NMR spectroscopy (Tables 2 and 3, Figs. 2–7), and DFT calculations (Helv. Chim. Acta 2009 , 92, 1, 1225, 2010 , 93, 1; Angew. Chem., Int. Ed. 2009 , 48, 3065). Almost all iminium salts of this type exist in solution as diastereoisomeric mixtures with (E)‐ and (Z)‐configured ⁺NC bond geometries. In this study, (E)/(Z) ratios ranging from 88 : 12 up to 98 : 2 (Tables 2 and 3) and (E)/(Z) interconversions (Figs. 2–7) were observed. Furthermore, the relative rates, at which the (E)‐ and (Z)‐isomers are formed from ammonium salts and α,β‐unsaturated aldehydes, were found to differ from the (E)/(Z) equilibrium ratio in at least two cases (Figs. 4 and 5, a, and Fig. 6, a); more (Z)‐isomer is formed kinetically than corresponding to its equilibrium fraction. Given that the enantiomeric product ratios observed in reactions mediated by organocatalysts of this type are often ≥99 : 1, the (E)‐iminium‐ion intermediates are proposed to react with nucleophiles faster than the (Z)‐isomers (Scheme 5 and Fig. 8). Possible reasons for the higher reactivity of (E)‐iminium ions (Figs. 8 and 9) and for the kinetic preference of (Z)‐iminium‐ion formation are discussed (Scheme 4). The results of related density functional theory (DFT) calculations are also reported (Figs. 10–13 and Table 4).     

Experimental and Theoretical Conformational Analysis of 5‐Benzylimidazolidin‐4‐one Derivatives – a ‘Playground’ for Studying Dispersion Interactions and a ‘Windshield‐Wiper’ Effect in Organocatalysis

The PF₆ salts of 5‐benzyl‐1‐isopropylidene‐ and 5‐benzyl‐1‐cinnamylidene‐3‐methylimidazolidin‐4‐ones 1 (Scheme) with various substituents in the 2‐position have been prepared, and single crystals suitable for X‐ray structure determination have been obtained of 14 such compounds, i.e., 2 – 10 and 12 – 16 (Figs. 2–5). In nine of the structures, the Ph ring of the benzyl group resides above the heterocycle, in contact with the cis‐substituent at C(2) (staggered conformation A ; Figs. 1–3); in three structures, the Ph ring lies above the iminium π‐plane (staggered conformation B ; Figs. 1 and 4); in two structures, the benzylic C? C bond has an eclipsing conformation ( C ; Figs. 1 and 5) which places the Ph ring simultaneously at a maximum distance with its neighbors, the CO group, the N?C‐π‐system, and the cis‐substituent at C(2) of the heterocycle. It is suggested by a qualitative conformational analysis (Fig. 6) that the three staggered conformations of the benzylic C? C bond are all subject to unfavorable steric interactions, so that the eclipsing conformation may be a kind of ‘escape’. State‐of‐the‐art quantum‐chemical methods, with large AO basic sets (near the limit) for the single‐point calculations, were used to compute the structures of seven of the 14 iminium ions, i.e., 3, 4 / 12, 5 – 7, 13 , and 16 (Table) in the two staggered conformations, A and B , with the benzylic Ph group above the ring and above the iminium π‐system, respectively. In all cases, the more stable computed conformer (‘isolated‐molecule’ structure) corresponds to the one present in the crystal (overlay in Fig. 7). The energy differences are small (≤2 kcal/mol) which, together with the result of a potential‐curve calculation for the rotation around the benzylic C? C bond of one of the structures, 16 (Fig. 8), suggests that the benzyl group is more or less freely rotating at ambident temperatures. The importance of intramolecular London dispersion (benzene ring in ‘contact’ with the cis‐substituent in conformation A ) for DFT and other quantum‐chemical computations is demonstrated; the benzyl‐imidazolidinones 1 appear to be ideal systems for detecting dispersion contributions between a benzene ring and alkyl or aryl CH groups. Enylidene ions of the type studied herein are the reactive intermediates of enantioselective organocatalytic conjugate additions, Diels–Alder reactions, and many other transformations involving α,β‐unsaturated carbonyl compounds. Our experimental and theoretical results are discussed in view of the performance of 5‐benzyl‐imidazolidinones as enantioselective catalysts.     

Preparation and Structures of 2‐Substituted 5‐Benzyl‐3‐methylimidazolidin‐4‐one‐Derived Iminium Salts,Reactive Intermediates in Organocatalytic Transformations Involving α,β‐Unsaturated Aldehydes

Preparations of the title compounds, 5 – 7 (Scheme 1 and Table 1), of their ammonium salts, 9 – 11 (Scheme 2 and Table 2), and of the corresponding cinnamaldehyde‐derived iminium salts 12 – 14 (Scheme 3 and Table 3) are reported. The X‐ray crystal structures of 15 cinnamyliminium PF₆ salts have been determined (Table 4). Selected ¹H‐NMR data (Table 5) of the ammonium and iminium salts are discussed, and structures in solution are compared with those in the solid state.     

A Novel Route to 1‐Substituted 3‐(Dialkylamino)‐9‐oxo‐9H‐indeno[2,1‐c]pyridine‐4‐carbonitriles

Heptalenecarbaldehydes 1 / 1′ as well as aromatic aldehydes react with 3‐(dicyanomethylidene)‐indan‐1‐one in boiling EtOH and in the presence of secondary amines to yield 3‐(dialkylamino)‐1,2‐dihydro‐9‐oxo‐9H‐indeno[2,1‐c]pyridine‐4‐carbonitriles (Schemes 2 and 4, and Fig. 1). The 1,2‐dihydro forms can be dehydrogenated easily with KMnO₄ in acetone at 0° (Scheme 3) or chloranil (=2,3,5,6‐tetrachlorocyclohexa‐2,5‐diene‐1,4‐dione) in a ‘one‐pot’ reaction in dioxane at ambient temperature (Table 1). The structures of the indeno[2,1‐c]pyridine‐4‐carbonitriles 5′ and 6a have been verified by X‐ray crystal‐structure analyses (Fig. 2 and 4). The inherent merocyanine system of the dihydro forms results in a broad absorption band in the range of 515–530 nm in their UV/VIS spectra (Table 2 and Fig. 3). The dehydrogenated compounds 5, 5′ , and 7a – 7f exhibit their longest‐wavelength absorption maximum at ca. 380 nm (Table 2). In contrast to 5 and 5′, 7a – 7f in solution exhibit a blue‐green fluorescence with emission bands at around 460 and 480 nm (Table 4 and Fig. 5).     

How Small Amounts of Impurities Are Sufficient to Catalyze the Interconversion of Carbonyl Compounds and Iminium Ions,or Is There a Metathesis through 1,3‐Oxazetidinium Ions? Experiments,Speculations, and Calculations

Under the ‘best anhydrous’ conditions, we were able to achieve, the bicyclic oxazolidinones derived from proline and pivalaldehyde (or cyclohexanone) equilibrate with added carbonyl compounds in (D₆)DMSO and in (D₆)benzene. With (¹⁸O)cyclohexanone, no incorporation of the label into the 1,3‐oxazolidinone ring was observed (in‐situ NMR investigations; Figs. 1, 3, and 4). Since an iminium‐carboxylate zwitterion might be involved in this process, we also studied the reaction of N‐isopropylidene‐pyrrolidinium perchlorate with cyclohexanone in anhydrous CDCl₃ (Fig. 5). We speculated that an interconversion between iminium and carbonyl species might occur in the absence of H₂O or other impurities, i.e., formally a metathesis through 1,3‐oxazetidinium ions (Schemes 2 and 3). A theoretical investigation with various DFT methods, ranging all the way to CCSD(T)/aug‐cc‐pVTZ//MP2/def2‐QZVPP, shows (Figs. 8–11) that oxazetidinium ions are stable species (more or less equi‐energetic with the reactants iminium ion+carbonyl system), but that the transition states leading to these cations are too high in energy for a reaction taking place in the gas phase at room temperature. Further investigations are proposed to study the iminium? carbonyl interconversion mechanism.     

Organocatalyzed Michael Addition of Aldehydes to Nitro Alkenes – Generally Accepted Mechanism Revisited and Revised

The amine‐catalyzed enantioselective Michael addition of aldehydes to nitro alkenes (Scheme 1) is known to be acid‐catalyzed (Fig. 1). A mechanistic investigation of this reaction, catalyzed by diphenylprolinol trimethylsilyl ether is described. Of the 13 acids tested, 4‐NO₂? C₆H₄OH turned out to be the most effective additive, with which the amount of catalyst could be reduced to 1 mol‐% (Tables 2–5). Fast formation of an amino‐nitro‐cyclobutane 12 was discovered by in situ NMR analysis of a reaction mixture. Enamines, preformed from the prolinol ether and aldehydes (benzene/molecular sieves), and nitroolefins underwent a stoichiometric reaction to give single all‐trans‐isomers of cyclobutanes (Fig. 3) in a [2+2] cycloaddition. This reaction was shown, in one case, to be acid‐catalyzed (Fig. 4) and, in another case, to be thermally reversible (Fig. 5). Treatment of benzene solutions of the isolated amino‐nitro‐cyclobutanes with H₂O led to mixtures of 4‐nitro aldehydes (the products 7 of overall Michael addition) and enamines 13 derived thereof (Figs. 6–9). From the results obtained with specific examples, the following tentative, general conclusions are drawn for the mechanism of the reaction (Schemes 2 and 3): enamine and cyclobutane formation are fast, as compared to product formation; the zwitterionic primary product 5 of C,C‐bond formation is in equilibrium with the product of its collapse (the cyclobutane) and with its precursors (enamine and nitro alkene); when protonated at its nitronate anion moiety the zwitterion gives rise to an iminium ion 6 , which is hydrolyzed to the desired nitro aldehyde 7 or deprotonated to an enamine 13 . While the enantioselectivity of the reaction is generally very high (>97% ee), the diastereoselectivity depends upon the conditions, under which the reaction is carried out (Fig. 10 and Tables 1–5). Various acid‐catalyzed steps have been identified. The cyclobutanes 12 may be considered an off‐cycle ‘reservoir’ of catalyst, and the zwitterions 5 the ‘key players’ of the process (bottom part of Scheme 2 and Scheme 3).     

Preparation and Characterization of New C2‐ and C1‐Symmetric Nitrogen,Oxygen, Phosphorous,and Sulfur Derivatives and Analogs of TADDOL. Part I

The chloro alcohols 4 – 6 derived from TADDOLs (=α,α,α′,α′‐tetraaryl‐1,3‐dioxolan‐4,5‐dimethanols) are used to prepare corresponding sulfanyl alcohols, ethers, and amines (Scheme 1 and Table 1). The dithiol analog of TADDOL and derivatives thereof, 45 – 49 , were also synthesized. The crystal structures of 16 representatives of this series of compounds are reported (Figs. 1–3 and Scheme 2). The thiols were employed in Cu‐catalyzed enantioselective conjugate additions of Grignard reagents to cyclic enones, with cycloheptenone giving the best results (er up to 94 : 6). The enantioselectivity reverses from Si‐addition with the sulfanyl alcohol to Re‐addition with the alkoxy or dimethylamino thiols (Table 4). Cu^I‐Thiolates, 50 – 53 , could be isolated in up to 84% yield (Scheme 2) and were shown to have tetranuclear structures in the gas phase (by ESI‐MS), in solution (CH₂Cl₂, THF; by vapor‐pressure osmometry and by NMR pulsed‐gradient diffusion measurements; Table 5), and in the solid state (X‐ray crystal structures in Scheme 2). The Cu complex 50 of the sulfanyl alcohol is stable in air and in the presence of weak aqueous acid, and it is a highly active catalyst (0.5 mol‐%) for the 1,4‐additions, leading to the same enantio‐ and regioselectivities observed with the in situ generated catalyst (6.5 mol‐%; Scheme 3). Since the reaction mixtures contain additional metal salts (MgX₂, LiX) it is not possible at this stage, to propose a mechanistic model for the conjugate additions.     

Synthesis and Characterization of New Heptalenes with Extended π‐Systems Attached to Them

Methyl heptalenecarboxylates of type A and B with π(1) and π(2) substituents in 1,4‐relation (Scheme 1) were synthetized starting with dimethyl 1‐methylheptalene‐4,5‐dicarboxylates 5b and 6b derived from 7‐isopropyl‐1,4‐dimethylazulene (=guaiazulene) and 1,4,6,8‐tetramethylazulene by thermal reaction with dimethyl acetylenedicarboxylate. The further general way of proceeding for the introduction of the π(1) and π(2) substituents is displayed in Scheme 3, and the thus obtained methyl heptalene‐5‐carboxylates of type A and B are listed in Table 1. The C?C bonds of the 2‐arylethenyl and 4‐arylbuta‐1,3‐dien‐1‐yl groups of π(1) and π(2) were in all cases (E)‐configured and showed s‐trans conformation at the C? C bonds (X‐ray and ¹H‐NOE evidence) in the B ‐type as well as in the A ‐type heptalenes (cf. Figs. 5–12). All B ‐type heptalenes showed a strongly enhanced heptalene band I in the wavelength region 440–490 nm in hexane/CH₂Cl₂ 9 : 1 (cf. Table 4 and Figs. 13–20). The A ‐type heptalenes showed in this region only weak absorption, recognizable as shoulders or simply tailing of the dominating heptalene bands II/III (Table 5). Absorption band I of the B ‐type heptalenes appeared almost at the same wavelength as the longest wavelength absorption band of comparable open‐chain α,ω‐diarylpolyenes (cf. Fig. 21). The cyclic double bond shift (DBS) of the A ‐ and B ‐type heptalenes could be photochemically steered in one or the other direction by selective irradiation (cf. Fig. 22).     

Photoswitchable Tetraethynylethene‐Dihydroazulene Chromophores

The synthesis, characterization, and photophysical as well as electrochemical properties of the photochromic hybrid systems 11 – 16 and 18 , which contain photoswitchable tetraethynylethene (TEE; 3,4‐diethynylhex‐3‐ene‐1,5‐diyne) and dihydroazulene (DHA) moieties, are presented. The molecular photoswitches were synthesized by a Sonogashira cross‐coupling reaction between an appropriate TEE precursor ( 6 – 10 and 17 ) and an iodinated DHA 1 or its vinylheptafulvene (VHF) isomer ( 4 ) (Schemes 5 – 7). X‐Ray crystal structures of five DHA derivatives ( 1 , trans‐ 11a , cis‐ 11a , 12 , and 13 ) are discussed (Figs. 2 – 5). In all compounds, the cyclohexatriene moiety of the DHA chromophore adopts a clear boat conformation (Table 1). Presumably due to crystal‐packing effects, the arylated TEE moieties in the hybrid systems show substantial distortions from planarity, with the dihedral angles between the planes of the central TEE core and the adjacent aryl substituents amounting to 44°. The switching properties were investigated by electronic absorption spectroscopy. Upon light absorption, DHAs 1 , 12 – 16 , and 18 underwent retro‐electrocyclization in solution to give the corresponding VHFs (Figs. 6, 11, and 12). The reaction is thermally reversible, with half‐lives τ_1/2 between 3.9 and 5.8 h at 25° in CH₂Cl₂ (Figs. 7 and 13 and Table 3). A comparatively slower (E)→(Z) isomerization process about the central C=C bond of the TEE moiety was also observed. The N,N‐dimethylanilino‐(DMA) substituted TEE‐DHA hybrid systems trans‐ 11a and cis‐ 11a did not react to the corresponding VHFs upon irradiation (Scheme 9). Instead, only the reversible (E)→(Z) photoisomerization of the TEE core occurred (Fig. 16 and Table 4). This process was further investigated for photofatigue by electronic‐emission spectroscopy (Fig. 17). After protonation of the DMA group, the usual DHA→VHF photoreaction took place. Compound 11 represents a three‐way chromophoric molecular switch with three addressable sub‐units (TEE core, DHA/VHF moiety, and proton sensitive DMA group) that can undergo individual, reversible switching cycles (Scheme 9). A process modeling the function of an `AND' logic gate (Fig. 19) and three write/erase processes could be performed with this system. Cyclic and linear sweep‐voltammetry studies in CH₂Cl₂ (+Bu₄NPF₆) revealed the occurrence of characteristic first‐reduction steps in the TEE‐DHA hybrid systems between −1.6 and −1.8 V vs. Fc/Fc⁺ (ferrocene/ferricinium couple) (Table 5). Oxidations occur at ca. +1.10 V. After photoisomerization to the VHF derivatives, reduction steps at more positive and oxidation steps at more negative potentials were recorded. No DHA→VHF isomerization took place upon electrochemical oxidation or reduction (Fig. 20).     

Crystal Structure of Akuammigine Picrate Hydrate

The single‐crystal X‐ray data of akuammigine picrate hydrate ( 1 ?Picr?H₂O) confirm the relative configuration of the indole alkaloid akuammigine ( 1 ) as epiallo (Fig. 1). With reference to the known (15S)‐configuration due to biosynthesis, the absolute configuration of the other stereogenic centers is thus given by (3R,19S,20S). Four crystallographically independent molecules are observed in the asymmetric unit (Fig. 2). Each of the alkaloid cations forms H‐bonds to a H₂O and a picrate anion (Fig. 3). The H₂O molecules are further associated by a H‐bond as indicated by the short O???O distance (Table 2). The conformation in the solid state of the picrate hydrate is now firmly established, and a cute H‐bonding motif is observed.     

Enantioselective Heterogeneous Epoxidation and Hetero‐Diels‐Alder Reaction with Mn‐ and Cr‐salen Complexes Immobilized on Silica Gel by Radical Grafting

Vinyl‐substituted chiral salens (salen=bis(salicylidene)ethylidenediamine) are used for attachment to Me₃Si‐hydrophobized silica gel (controlled‐pore glass, CPG), carrying covalently bound mercaptopropyl ‘substituents', by AIBN‐mediated radical addition of SH groups to styryl C=C bonds (Scheme 1, Table 1, and Figs. 1 and 2). The immobilized Mn‐ and Cr‐salen complexes, thus accessible, have been employed in enantioselective epoxidations (Scheme 2, Tables 2 and 3, and Fig. 3) and hetero‐Diels‐Alder additions of aldehydes to Danishefsky's diene (Scheme 3, Tables 4 and 5, and Figs. 4 and 5), with an emphasis on multiple use of the immobilized catalysts. The enantioselectivities (es) of the two reactions were very similar to those reported for homogeneous conditions. After five to seven runs, all the CPG‐bound Mn‐salen complexes performed somewhat less well (70 instead of 75% es with styrene; Fig. 3). The Cr complex, which was shown to give rise to a linear relationship between the enantiomeric purities of ligand and product under homogeneous conditions (Fig. 4), exhibited the opposite behavior: after five runs, the enantioselecitivity of the hetero‐Diels‐Alder reaction had risen (from an average of 76 to ca. 83%) to remain constant for another five runs (Fig. 5). We have established for both catalysts that no reaction takes place in the supernatant solution (no leaching of catalytically active Mn or Cr species from the CPG into solution; heterogeneity test; Tables 3 and 5). The results described are yet another demonstration for the successful ‘conversion' of homogeneous to heterogeneous catalysts by immobilization on hydrophobic CPG, with multiple application of the same catalyst batch.     

Synthesis and High‐Resolution NMR Structure of a β3‐Octapeptide with and without a Tether Introduced by Olefin Metathesis

Bridging between (i)‐ and (i+3)‐positions in a β³‐peptide with a tether of appropriate length is expected to prevent the corresponding 3₁₄‐helix from unfolding (Fig. 1). The β³‐peptide H‐β³hVal‐β³hLys‐β³hSer(All)‐β³hPhe‐β³hGlu‐β³hSer(All)‐β³hTyr‐β³hIle‐OH ( 1 ; with allylated βhSer residues in 3‐ and 6‐position), and three tethered β‐peptides 2 – 4 (related to 1 through ring‐closing metathesis) have been synthesized (solid‐phase coupling, Fmoc strategy, on chlorotrityl resin; Scheme). A comparative CD analysis of the tethered β‐peptide 4 and its non‐tethered analogue 1 suggests that helical propensity is significantly enhanced (threefold CD intensity) by a (CH₂)₄ linker between the β³hSer side chains (Fig. 2). This conclusion is based on the premise that the intensity of the negative Cotton effect near 215 nm in the CD spectra of β³‐peptides represents a measure of ‘helical content’. An NMR analysis in CD₃OH of the two β³‐octapeptide derivatives without (i.e., 1 ) and with tether (i.e., 4 ; Tables 1–6, and Figs. 4 and 5) provided structures of a degree of precision (by including the complete set of side chain–side chain and side chain–backbone NOEs) which is unrivaled in β‐peptide NMR‐solution‐structure determination. Comparison of the two structures (Fig. 5) reveals small differences in side‐chain arrangements (separate bundles of the ten lowest‐energy structures of 1 and 4 , Fig. 5, A and B ) with little deviation between the two backbones (superposition of all structures of 1 and 4 , Fig. 5, C ). Thus, the incorporation of a CH₂? O? (CH₂)₄? O? CH₂ linker between the backbone of the β³‐amino acids in 3‐ and 6‐position (as in 4 ) does accurately constrain the peptide into a 3₁₄‐helix. The NMR analysis, however, does not suggest an increase in the population of a 3₁₄‐helical backbone conformation by this linkage. Possible reasons for the discrepancy between the conclusion from the CD spectra and from the NMR analysis are discussed.     

Secondary Amine‐Catalyzed Asymmetric γ‐Alkylation of α‐Branched Enals via Dienamine Activation

The direct and enantioselective γ‐alkylation of α‐substituted α,β‐unsaturated aldehydes proceeding under dienamine catalysis is described. We have found that the Seebach modification of the diphenyl‐prolinol silyl ether catalyst in combination with saccharin as an acidic additive promotes an S_N1 alkylation pathway, while ensuring complete γ‐site selectivity and a high stereocontrol. Theoretical and spectroscopic investigations have provided insights into the conformational behavior of the covalent dienamine intermediate derived from the condensation of 2‐methylpent‐2‐enal and the chiral amine. Implications for the mechanism of stereoinduction are discussed.     

Stoichiometric Reactions of Enamines Derived from Diphenylprolinol Silyl Ethers with Nitro Olefins and Lessons for the Corresponding Organocatalytic Conversions – a Survey

The stoichiometric reactions of enamines prepared from aldehydes and diphenyl‐prolinol silyl ethers (intermediates of numerous organocatalytic processes) with nitro olefins have been investigated. As reported in the last century for simple achiral and chiral enamines, the products are cyclobutanes ( 4 with monosubstituted nitro‐ethenes), dihydro‐oxazine N‐oxide derivatives ( 5 with disubstituted nitro‐ethenes), and nitro enamines derived from γ‐nitro aldehydes ( 6 , often formed after longer reaction times). The same types of products were shown to be formed, when the reactions were carried out with peptides H‐Pro‐Pro‐Xaa‐OMe that lack an acidic H‐atom. Functionalized components such as alkoxy enamines, nitro‐acrylates, acetamido‐nitro‐ethylene, or hydroxylated nitro olefins also form products carrying the diphenyl‐prolinol silyl ether as a substituent. All of these products must be considered intermediates in the corresponding catalytic reactions; the investigation of their chemical properties provided useful hints about the rates, the conditions, the catalyst resting states or irreversible traps, and/or the limitations of the corresponding organocatalytic processes. High‐level DFT and MP2 computations of the structures of alkoxy enamines and thermodynamic data of a cyclobutane dissociation are also described. Some results obtained with the stoichiometrically prepared intermediates are not compatible with previous mechanistic proposals and assumptions.     

Oligoporphyrin Arrays Conjugated to [60]Fullerene: Preparation,NMR Analysis,and Photophysical and Electrochemical Properties

We report the synthesis and physical properties of novel fullerene–oligoporphyrin dyads. In these systems, the C‐spheres are singly linked to the terminal tetrapyrrolic macrocycles of rod‐like meso,meso‐linked or triply‐linked oligoporphyrin arrays. Monofullerene–mono(Zn^II porphyrin) conjugate 3 was synthesized to establish a general protocol for the preparation of the target molecules (Scheme 1). The synthesis of the meso,meso‐linked oligopophyrin–bisfullerene conjugates 4 – 6 , extending in size up to 4.1 nm ( 6 ), was accomplished by functionalization (iodination followed by Suzuki cross‐coupling) of the two free meso‐positions in oligomers 21 – 23 (Schemes 2 and 3). The attractive interactions between a fullerene and a Zn^II porphyrin chromophore in these dyads was quantified as ΔG=−3.3 kcal mol⁻¹ by variable‐temperature (VT) ¹H‐NMR spectroscopy (Table 1). As a result of this interaction, the C‐spheres adopt a close tangential orientation relative to the plane of the adjacent porphyrin nucleus, as was unambiguously established by ¹H‐ and ¹³C‐NMR (Figs. 9 and 10), and UV/VIS spectroscopy (Figs. 13–15). The synthesis of triply‐linked diporphyrin–bis[60]fullerene conjugate 8 was accomplished by Bingel cyclopropanation of bis‐malonate 45 with two C₆₀ molecules (Scheme 5). Contrary to the meso,meso‐linked systems 4 – 6 , only a weak chromophoric interaction was observed for 8 by UV/VIS spectroscopy (Fig. 16 and Table 2), and the ¹H‐NMR spectra did not provide any evidence for distinct orientational preferences of the C‐spheres. Comprehensive steady‐state and time‐resolved UV/VIS absorption and emission studies demonstrated that the photophysical properties of 8 differ completely from those of 4 – 6 and the many other known porphyrin–fullerene dyads: photoexcitation of the methano[60]fullerene moieties results in quantitative sensitization of the lowest singlet level of the porphyrin tape, which is low‐lying and very short lived. The meso,meso‐linked oligoporphyrins exhibit ¹O₂ sensitization capability, whereas the triply‐fused systems are unable to sensitize the formation of ¹O₂ because of the low energy content of their lowest excited states (Fig. 18). Electrochemical investigations (Table 3, and Figs. 19 and 20) revealed that all oligoporphyrin arrays, with or without appended methano[60]fullerene moieties, have an exceptional multicharge storage capacity due to the large number of electrons that can be reversibly exchanged. Some of the Zn^II porphyrins prepared in this study form infinite, one‐dimensional supramolecular networks in the solid state, in which the macrocycles interact with each other either through H‐bonding or metal ion coordination (Figs. 6 and 7).     

CD Spectra in Methanol of β‐Oligopeptides Consisting of β‐Amino Acids with Functionalized Side Chains,with Alternating Configuration,and with Geminal Backbone Substituents – Fingerprints of New Secondary Structures?

β‐Hexa‐, β‐hepta‐, and β‐nonapeptides, 1 – 6 , which carry functionalized side chains (CO₂R, CO, (CH₂)₄NH, CH₂−CH=CH₂) consisting of β³‐amino‐acid residues of alternating configuration, or which carry geminal substituents in the 2‐ or 3‐positions of all residues, have been synthesized (Schemes 1 – 3), and their CD spectra in MeOH are reported (Figs. 2 – 6). Strong Cotton effects (Θ>10⁵) are indicative of the presence of chiral secondary structures. It is suggested by simple modelling (Fig. 1) that the new β‐peptides should not be able to fold to the familiar 3₁₄‐helical structures. Still, three of them ( 3 , 4 , and 5 ) give rise to CD spectra matching those of β‐peptides that are known to be present as (M)‐ or (P)‐3₁₄‐helices in MeOH solution. While possible folding motifs (Figs. 3,b, and 7) of the new β‐peptides have been identified in crystal structures, an interpretation of the CD spectra has to be postponed until NMR solution structures become available. A list of all β‐peptides giving rise to CD spectra with a minimum near 215 nm is included (Table).     

Preparation and Structure of Oligolides from (R)-3-Hydroxypentanoic Acid and comparison with the hydroxybutanoic-acid derivatives: A small change with large consequences

Cyclic oligomers of (R)-3-hydroxyvaleric acid (3-HV) are prepared from the monomer by three different methods, giving various ratios of the oligomers. The macrocycles containing three to twelve 3-HV units (12- to 48-membered rings) are isolated in pure form by chromatography. The triolide 3 can be separated by distillation and isolated on large scale. Biopol, the copolymer of (R)-3-hydroxybutanoic acid (3-HB) and (R)-3-hydroxyvaleric acid (3-HV), is degraded to mixtures of Me- and Et-substituted triolides (‘mixolides’) with high crystallization tendency. The X-ray crystal structures of the tetrolide 4 , pentolide 5 , hexolide 6 , heptolide 7 , and of two ‘mixolides’ (with inclusions of solvent) have been determined (Figs. 3–7, 10, and 11) and are compared with those of the corresponding 3-HB derivatives reported previously. From the structural data, a 3₁ and a 2₁ helix of 3-HV can be modelled, and the latter one compared with helix structures of P9(3-HB) and P(3-HV) derived from stretch-fibre X-ray scattering. Crystals of a water-containing NaSCN complex of the triethyl triolide 3 were obtained in good quality for X-ray analysis. The structure (Figs. 12, 13, and Table 6) contains an interesting array of C?O and H₂O O-atoms around the Na⁺ ions along a channel-type tube (a-axis of the crystal) which may be relevant to the role of P(3-HB) and P(3-HV) as components of cellular ion channels.