界面改性对玻纤增强聚丙烯弯曲强度的影响

为了提高玻纤增强聚丙烯（ＰＰ）的界面粘结，分别用Ｂ３０１或硅烷偶联剂对玻纤表面进行了处理，用过氧化物和顺丁烯二酸酐对ＰＰ进行了改性。经处理和改性后，ＰＰ／ＧＦ复合材料的弯曲强度有明显提高，对玻纤增强聚丙烯的界面结构也作了探讨。     

芳烷基酚树脂玻纤增强材料性能的研究

用芳烷基酚树脂与玻璃纤维布制成纤维增强材料，研究了引材料的高温热老化性能和在３０－５０％热沸太航热醋和含氯离子的热沸醋酸下的腐蚀性能。     

玻璃纤维对碳纳米管填充聚合物/热塑性聚氨酯共混体系导电性能的影响

研究了表面带有环氧基团的玻璃纤维(GF)对聚丙烯(PP)/热塑性聚氨酯(TPU)/多壁碳纳米管(MWCNT)、 聚甲基丙烯酸甲酯(PMMA)/TPU/MWCNT和聚乳酸(PLA)/TPU/MWCNT体系导电性能的影响. 研究结果表明, 未添加GF时, 由于MWCNTs选择性地分布在TPU分散相中, PP/TPU/MWCNT, PMMA/TPU/MWCNT和PLA/TPU/MWCNT材料的导电性能很差; 加入20%的GF使3个体系的电阻率均大幅度下降, 最高下降约13个数量级, 表明填充GF是一种具有普适性的改善以TPU为分散相的共混体系导电性能的有效方法. GF使体系电阻率降低的机理主要是形成了TPU包覆GF结构, 该结构可以看作长径比较高的导电棒, 可以有效协助导电通路的构建; 同时GF还起到了体积占位的作用, 提高了体系中导电组分在基体中的有效浓度.     

玻璃纤维的表面金属化

采用以甲醛为还原剂、EDTA·Na2和TART·KNa为络合剂的双络合剂体系对玻璃纤维表面进行了化学镀铜.结果表明,在玻璃纤维表面上成功镀覆上一层致密、亮铜色的铜镀层.     

退火条件对山梨醇玻璃焓松弛参数的影响

采用差示扫描量热法(DSC)测定山梨醇样品经历不同时间(t_a)等温退火后, 以10 K·min^-1速率进行升温时玻璃化转变温度(T_g)前后的比热容(C_p(T)). 将Gómez Ribelles (GR)提出的一种基于构型熵的现象学模型用于描述山梨醇玻璃的焓松弛行为, 考察GR模型能否适用于小分子玻璃体系. 结果表明, 单组GR模型参数拟合的曲线均能较好重现对应热历史条件下的山梨醇体系的实验所得C_p(T)曲线, 尽管并未找到不随热历史而变的一组参数作为材料常数, 但与其它现象学模型应用于小分子玻璃时, 其模型参数都随热历史变化而变化的特点相比, GR模型的某些参数基本保持不变. 且在较长退火时间下拟合得到的模型参数普适性较好. 同经历连续降温的山梨醇相比, 等温退火过程得到的松弛极限态参数(δ)的平均值与T_g处比热容增量(ΔC_p(T_g))的比值明显增大, 但仍小于聚合物的值, 表明GR模型提出的亚稳极限态对小分子玻璃的影响值得商榷.     

Effect of Chemical Treatment and Fiber Loading on Mechanical Properties of Borassus (Toddy Palm) Fiber/Epoxy Composites

The aim of the present study was to investigate and compare the mechanical properties of untreated and chemically modified Borassus fiber–reinforced epoxy composites. Composites were prepared by the hand lay-up process by reinforcing Borassus fibers with epoxy matrix. To improve the fiber-matrix adhesion properties, alkali (NaOH) and alkali combined with silane (3-aminopropyltriethoxysilane) treatment of the fiber surface was carried out. Examinations through Fourier transform-infrared spectroscopy and scanning electron microscopy (SEM) were conducted to investigate the structural and physical properties of the Borassus fibers. Tensile properties such as modulus and strength of the composites made with chemically modified and untreated Borassus fibers were studied using a universal testing machine. Based on the experimental results, it was found that the tensile properties of the Borassus-reinforced epoxy composites were significantly improved as compared with the neat epoxy. It was also found that the fiber treated with a combination of alkali and silane exhibited superior mechanical properties to alkali-treated and untreated fiber composites. The nature of the fiber/matrix interface was examined through SEM of cryo-fractured samples. Chemical resistance of composites was also found to be improved with chemically modified fiber composites.     

玻璃纤维表面的乙烯基单体接枝聚合

用玻璃纤维表面处理剂ＭＡＣ处理玻璃纤维后，再进行臭氧处理，使玻璃纤维的表面产生活性中心，引发苯乙烯、甲基丙烯酸甲酯、及丙烯酸等乙烯基单体在玻璃纤维表面上接枝聚合。接枝纤维的密度减小，对水的浸润性下降，红外光谱及扫描电镜观察证明玻璃纤维表面上接枝聚合物的存在。     

嵌段共聚偶联剂对玻璃纤维增强聚丙烯界面粘结的影响

合成了苯乙烯与丁二烯及含C==C硅烷的嵌段共聚偶联剂。采用该嵌段共聚物对玻璃纤维进行了表面处理,通过单丝临界长度法测定了玻璃纤堆增强聚丙烯的界面剪切强度。结果表明：采用嵌段共聚偶联剂对玻璃纤维进行处理,可以有效地改善玻璃纤维增强聚丙烯的界面粘结,其界面改性效果优于普通小分子偶联剂;嵌段共聚偶联剂的分子结构对界面粘结有影响,采用适当的嵌段长度,可获得较好的界面粘结;在基体树脂中加入功能化聚丙烯。可改善复合体系的界面粘结;基体树脂分子链较长或流动性好、粘度低,有利于基体与歼堆的的界面粘结。     

三聚氰胺氰尿酸盐对玻纤增强尼龙66复合材料阻燃性能的影响

将三聚氰胺氰尿酸盐(MCA)阻燃剂添加到玻纤增强的尼龙66复合材料(GF-PA66)中。利用UL-94实验对MCA在复合材料中的阻燃效果进行研究;通过扫描电子显微镜(SEM)分析了燃烧后的样品形貌,并利用热重分析法对复合材料的热分解行为进行了研究。结果表明:MCA可使玻纤增强尼龙66复合材料达到UL-94V-0级阻燃效果;MCA晶体被均匀地分散于尼龙基体中,在燃烧时MCA通过自身吸热分解,产生不可燃气体,实现气相阻隔,从而起到阻燃作用,并在复合材料自熄面上留下纳米级气孔。     

环氧树脂/玻璃纤维复合界面的电子能谱化学分析

采用化学分析用电子能谱技术分别对机械剥离后的玻璃纤维布和短切玻璃纤维增强环氧树脂试样的玻璃纤维面作了对比分析,发现树脂残留物表面上有富裕的环氧基,证明剥离不是发生在树脂／玻璃纤维（布）粘结界面上,而是发生在粘结界面附近的树脂层里;环氧树脂／玻璃纤维布界面比环氧树脂／短切玻璃纤维界面有更强的界面增强效应。     

Mechanical Properties and Dynamic Mechanical Analysis of Thermoplastic-Natural Fiber/Glass Reinforced Composites

The mechanical properties and dynamic behavior of thermoplastic composites based on polypropylene/glass fibers and polypropylene/natural fibers (i.e. kenaf, hemp, flax) are presented. A survey is given on some aspects, crucial for the use of these composites in structural and non-structural components such as their vibration-damping response, in relation to the composite compaction level and the manufacturing procedure. In order to investigate a wide vibration frequency range, including acoustic frequencies, different testing techniques, both with forced and free vibrations, were applied. A comparison between natural fiber and glass fiber reinforced laminates is presented. Compaction levels, allowing to obtain the best compromise between mechanical performance and damping response, are investigated.     

接枝改性木纤维对聚氯乙烯／木纤维复合材料力学性能的影响

接枝改性木纤维对聚氯乙烯／木纤维复合材料力学性能的影响廖兵，黄玉惠，赵树录，林果，丛广民（中国科学院广州化学研究所广州５１０６５０）关键词木纤维，聚氯乙烯／木纤维复合材料，接枝木纤维可作塑料的增强填料，但它与塑料的界面亲合性差，须进行改性，改善表面亲...     

热场效应下聚酰亚胺纤维力学性质有限元分析

利用COMSOL Multiphysics 5.3软件构建了聚酰亚胺纤维三维有限元模型。 该模型实现了固体传热和表面对表面辐射传热产生的温度场中聚酰亚胺纤维固体力学的计算,重点分析了孔洞的大小、位置和热膨胀系数的差异对聚酰亚胺纤维力学性能的影响。 结果表明,聚酰亚胺(PI)纤维在两端固定约束的条件下,在固体传热和表面对表面辐射传热产生的温度场中呈现相似的应力变化趋势,即聚酰亚胺纤维出现孔洞,使纤维的力学性能降低,孔洞越大,应力分布越不均衡,越不利于纤维性质的稳定;温度越高,应力越大;但随着负轴向热膨胀系数的增加,应力逐渐减小。     

Mechanical Properties and Chemical Resistance of Short Tamarind Fiber/Unsaturated Polyester Composites: Influence of Fiber Modification and Fiber Content

In the present work, tamarind fibers were extracted from ripened fruits by the water retting process. Using these fibers as reinforcement and unsaturated polyester as matrix, composite samples were prepared by the hand lay-up technique. The effect of chemical surface treatments (alkali and silane) of tamarind fibers on the mechanical properties, chemical resistance, and interfacial bonding was studied. The mechanical properties of the composites with surface modified fibers were found to be higher than those with unmodified fibers. Morphological studies indicated improvement of interfacial bonding by alkali and silane coupling agent treatments of the fibers. The composites were found to be resistant to many chemicals.     

Effect of Chemical Treatments on Physicochemical Properties of Prosopis juliflora Fibers

Incompatibility between hydrophilic natural fibers and hydrophobic matrix is known to affect the adhesion of the fiber and matrix. Therefore, it becomes necessary to modify the surface of natural fibers for improved adhesion between the fiber and matrix. Prosopis juliflora fibers (PJFs) are known to possess desirable properties for use as reinforcement in polymer matrices. Using chemical analysis, the optimal condition for alkali treatment of the PJFs was found to be 5% (w/v) of NaOH concentration with 60 min soaking time. Chemical modifications favorably changed the physiochemical properties of PJFs and undoubtedly diminished the amorphous and wax contents.     

偶氮氯膦—mA螯合纤维的合成及性能研究

本文合成了偶氮氯膦－ｍＡ螯合纤维，研究了酸度及共存离子对其稳定性的影响，探讨了该螯合纤维对稀土元素的吸附行为。     

不同干燥条件下壳聚糖膜表面的微观结构及微观力学性能

以自然风干(NW)、真空干燥(VD)及红外干燥(ID)三种干燥方式制备了壳聚糖膜.利用原子力显微镜(AFM)研究这三种壳聚糖膜的表面形貌及微观力学性能.实验结果表明VD和ID改善了膜材料的表面平整度,膜表面粗糙度分别为(5.47±1.34)和(2.79±0.93)nm,均显著低于NW膜((30.67±8.06)nm).干燥条件对壳聚糖膜的微观力学性能有较大影响:ID壳聚糖膜的粘附力((2595.0±68.5)pN)显著大于NW壳聚糖膜((982.6±149.3)pN)和VD壳聚糖膜((1817.9±279.2)pN);而ID壳聚糖膜的杨氏模量((158.8±15.2)MPa)则低于NW壳聚糖膜((204.3±22.7)MPa)和VD壳聚糖膜((195.8±14.6)MPa)的.