Sequence Specific Electrochemical DNA Detection Based on Solution‐Phase Competitive Hybridization

We report a novel electrochemical method for detecting sequence‐specific DNA based on competitive hybridization that occurs in a homogeneous solution phase instead of on a solution‐electrode interface as in previously reported competition‐based electrochemical DNA detection schemes. The method utilizes the competition between the target DNA (t‐DNA) and a ferrocene‐labeled peptide nucleic acid probe (Fc‐PNA) to hybridize with a probe DNA (p‐DNA) in solution. The neutral PNA backbone and the electrostatic repulsion between the negatively‐charged DNA backbone and the negatively‐charged electrode surface are then exploited to determine the result of the competition through measurement of the electrochemical signal of Fc. Upon the introduction of the t‐DNA, the stronger hybridization affinity between the t‐DNA and p‐DNA releases the Fc‐PNA from the Fc‐PNA/p‐DNA hybrid, allowing it to freely diffuse to the negatively charged electrode to produce a significantly enhanced electrochemical signal of Fc. Therefore, the presence of the t‐DNA is indicated by the appearance or enhancement of the electrochemical signal, rendering a signal‐on DNA detection, which is less susceptible to false positive and can produce more reliable results than signal‐off detection methods. All the competitive hybridizations occur in a homogeneous solution phase, resulting in very high hybridization efficiency and therefore extremely short assay time. This simple and fast signal‐on solution‐competition‐based electrochemical DNA detection strategy has promising potential to find application in fields such as nucleic acid‐based point‐of‐care testing.     

PAMAM Dendrimers‐Based DNA Biosensors for Electrochemical Detection of DNA Hybridization

Gold electrodes were modified with submonolayers of mercaptoacetic acid (RSH) and further reacted with poly(amidoamine) (PAMAM) dendrimers (generation 4.0) to obtain thin films, on which DNA probe was later immobilized to afford a stable recognition layers. The characterization of the PAMAM/RSH‐modified electrode was investigated by cyclic voltammetry (CV) and electrochemical impedance measurement. Differential pulse voltammogram (DPV) measurement was used to monitor DNA hybridization with daunomycin (DNR) as indicator. Experiments carried out with these novel materials not only showed an improved DNA attachment quantity on the dendrimers‐modified electrodes compared to DNA sensors with oligonucleotides directly immobilized on Au electrodes, but also exhibited a high selectivity, sensitivity and stability for the measurement of DNA hybridization.     

Simple and Sensitive Electrochemical DNA Detection of Primer Generation‐Rolling Circle Amplification

A new electrochemical sequence‐specific DNA detection platform based on primer generation‐rolling circle amplification (PG‐RCA), methylene blue (MB) redox indicator, and indium tin oxide (ITO) electrode is reported. In the presence of a specific target sequence, PG‐RCA, an isothermal DNA amplification technique, produced large amounts of amplicons in an exponential manner. In addition to the standard components, the reaction mixture contained MB, which bound with the PG‐RCA amplicons. End‐point electrochemical measurement by differential pulse voltammetry (DPV) was performed using ITO electrode. The amplicon‐bound MB resulted in a lower DPV signal than free MB due to a smaller diffusion coefficient as well as electrostatic repulsion between the negatively charged amplicon‐bound MB and ITO electrode. With simple assay design (recognition probe) and instrumentation (operating temperature at 37 °C and ITO electrode without the need for probe immobilization), this detection platform is well suited for point‐of‐care and on‐site testing. Real‐time measurement was also achieved by pretreating the ITO electrode with bovine serum albumin.     

Electrochemical Detection of Abasic Site‐Containing DNA

A simple and rapid approach for detecting apurinic (AP) sites in DNA, based on direct stripping chronopotentiometric measurements of the adenine and guanine nucleobases at a graphite electrode is described. Tetrahydrofuranyl residues, lacking a nucleobase moiety, were utilized for designing the AP sites and were incorporated in 19‐mer oligonucleotides. The change of adenine‐to‐guanine response ratio (A/G) in one‐, two‐ or three‐substituted adenosine residues for stable analogs of AP sites was exploited for electrochemical measurements of the adenine loss. The resulting A/G response ratio decreases linearly upon increasing the number of AP sites in the oligonucleotides; the values of A/G electrochemical signals were slightly enhanced when compared to the actual purine content. HPLC analysis of the released nucleobases confirmed that the sulfuric acid‐induced oligonucleotide cleavage provides complete apurination and dissolution of the released nucleobases in aqueous solution. Additional experiments with mixtures of free nucleobases and purine nucleosides reveal that the larger A/G ratio observed in the electrochemical analysis of AP‐site‐containing oligomers is attributed to the influence of the acid and/or thermal decomposition products (particularly the sugar fragments). This study represents the first step in developing a simple and direct electrochemical assay of AP sites in single‐stranded DNA.     

A Host‐Guest‐Recognition‐Based Electrochemical Sensor for Sequence‐Specific DNA Detection

We herein constructed a sensor that converts target DNA hybridization‐induced conformational transformation of the probe DNA to electrochemical response based on host‐guest recognition and nanoparticle label. In the sensor, the hairpin DNA terminal‐labeled with 4‐((4‐(dimethylamino)phenyl)azo)benzoic acid (dabcyl) and thiol group was immobilized on Au electrode surface as the probe DNA by Au‐S bond, and the CdS nanoparticles surface‐modified with β‐cyclodextrins (CdS‐CDs) were employed as electrochemical signal provider and host‐guest recognition element. Initially, the probe DNA immobilized on electrode kept the stem‐loop configuration, which shielded dabcyl from docking with the CdS‐CDs in solution due to the steric effect. After target hybridization, the probe DNA underwent a significant conformational change, which forced dabcyl away from the electrode. As a result, formerly‐shielded dabcyl became accessible to host‐guest recognition between β‐cyclodextrin (β‐CD) and dabcyl, thus the target hybridization event could be sensitively transduced to electrochemical signal provided by CdS‐CDs. This host‐guest recognition‐based electrochemical sensor has been able to detect as low as picomolar DNA target with excellent differentiation ability for even single mismatch.     

Electrochemical Detection of DNA Hybridization Based on the Probe Labeled with Carbon‐Nanotubes Loaded with Silver Nanoparticles

A sensitive electrochemical method for the detection of DNA hybridization based on the probe labeled with multiwall carbon‐nanotubes (MWNTs) loaded with silver nanoparticles (Ag‐MWNTs) has been developed. MWNTs were electroless‐plated with a large number of silver nanoparticles to form Ag‐MWNTs. Probe single strand DNA (ss‐DNA) with a thiol group at the 3′‐terminal labeled with Ag‐MWNTs by self‐assembled monolayer (SAM) technique was employed as an electrochemical probe. Target ss‐DNA with a thiol group was immobilized on a gold electrode by SAM technique and then hybridized with the electrochemical probe. Binding events were monitored by differential pulse voltammetric (DPV) signal of silver nanoparticles. The signal difference permitted to distinguish the match of two perfectly complementary DNA strands from the near perfect match where just three base pairs were mismatched. There was a linear relation between the peak current at +120 mV (vs. SCE) and complementary target ss‐DNA concentration over the range from 3.1×10^?14 to 1.0×10^?11 mol/L with a detection limit of 10 fmol/L of complementary target ss‐DNA. The proposed method has been successfully applied to detection of the DNA sequence related to cystic fibrosis. This work demonstrated that the MWNTs loaded with silver nanoparticles offers a great promising approach for sensitive detection of DNA hybridization.     

Lead Sulfide Nanoparticle as Oligonucleotides Labels for Electrochemical Stripping Detection of DNA Hybridization

We report a method for the detection of DNA hybridization in connection to lead sulfide (PbS) nanoparticle tags and electrochemical stripping measurement of the lead. A kind of lead sulfide nanoparticle with free carboxyl groups on its surface was synthesized in aqueous solution. The nanoparticle was used as a marker to label a sequence‐known oligonucleotide, which was then employed as a DNA probe for identifying a target ssDNA immobilized on a PPy modified electrode based on a specific hybridization reaction. The hybridization events were monitored by the oxidation dissolution of the lead sulfide anchored on the hybrids and the indirect determination of the lead ions by anodic stripping voltammetry (ASV). The detection limit is 0.3 pmol L^?1 of target oligonucleotides. The PbS nanoparticle combining its easy conjugation to the DNA molecule with the highly sensitive stripping voltammetry detection of lead shows its promising application in the electrochemical DNA hybridization analysis assay.     

Coupling Electrochemical Adsorption and Long‐range Electron Transfer: Label‐free DNA Mismatch Detection with Ultramicroelectrode (UME)

A new electrochemical hybridization transduction pathway, obtained by coupling electrochemical adsorption and long‐range electron transfer through double‐stranded DNA, was investigated using ultramicroelectrode (UME). The results show that long‐range electron transfer does not occurs exclusively throws well‐packed and organized self‐assembled DNA monolayers. This approach is used to investigate long‐range electron transfer properties of both single‐ and double‐ stranded short synthetic DNA and DNA plasmids. Single mismatch electrochemical detection protocol of non‐labelled short synthetic DNA, without heating or probe labelling, in a 10 minutes protocol, was in fine performed.     

基于纳米金胶标记DNA探针的电化学DNA传感器研究

以纳米金胶为标记物,将其标记于人工合成的5-端巯基修饰的寡聚核苷酸片段上,制成了具有电化学活性的金胶标记DNA电化学探针;在一定条件下,使其与固定在玻碳电极表面的靶序列进行杂交反应,利用ssDNA与其互补链杂交的高度序列选择性和极强的分子识别能力,以及纳米金胶的电化学活性,实现对特定序列DNA片段的电化学检测以及对DNA碱基突变的识别.     

A Single‐Surface Electrochemical Biosensor for the Detection of DNA Triplet Repeat Expansion

Molecular diagnostics of inherited neurodegenerative disorders such as fragile X syndrome, myotonic dystrophy or Friedreich ataxia (FRDA) is based on analysis of the length of trinucleotide repetitive sequences in certain loci of genomic DNA. The current methods employ PCR and electrophoretic determination of the amplified DNA fragment size. We have recently shown that length of a triplet repetitive DNA sequence can be determined using a double‐surface electrochemical technique involving multiple hybridization of the expanded triplet repeat with short labeled reporter probe (spanning several trinucleotides). Here we propose a single‐surface sensor employing an analogous principle. Target DNA (tDNA) is adsorbed onto surface of a carbon (pyrolytic graphite or screen‐printed) electrode. Biotin‐labeled reporter probe (RP) is hybridized with the immobilized tDNA followed by binding of streptavidin‐alkaline phosphatase (ALP) conjugate. The ALP catalyzes production of an electroactive indicator (1‐naphthol) which is detected voltammetrically on the same electrode. Signal resulting from this electrochemical enzyme‐linked DNA hybridization assay is normalized to the amount of tDNA immobilized at the transducer surface either by measuring intrinsic tDNA voltammetric response, or using electrochemical labeling of the tDNA with osmium tetroxide 2,2′‐bipyridine complex. Detection of (GAA)_n?(TTC)_n triplet repeat expansion in nanogram quantities of PCR‐amplified tDNAs, including amplicons of patients' genomic DNA, is demonstrated. We show that our technique allow differentiation between normal and pathological alleles of X25 gene related to the FRDA.     

Electrochemical Detection of Duplex DNA Using Intercalation‐Triggered Decomplexation of Ferrocene with β‐Cyclodextrin

The redox peak of ferrocenylnaphthalene diimide used as a threading intercalator shifted positively due to the formation of its complex with β‐cyclodextrin. This complex collapsed upon the addition of double‐stranded DNA, and its redox potential shifted negatively. This behavior was applied for the homogenous detection of a polymerase chain reaction (PCR) product from Porphyromonas gingivalis, which is important for the diagnosis of periodontal disease, and its quantitative detection was achieved with a detection limit of 2.7 nM.     

Sensitive Electrochemical Detection of Horseradish Peroxidase at Disposable Screen‐Printed Carbon Electrode

A rapid, simple and sensitive electrochemical assay of horseradish peroxidase (HRP) performed on disposable screen‐printed carbon electrode was developed. HRP activities were monitored by square‐wave voltammetric (SWV) measuring the electroactive enzymatic product in the presence of o‐aminophenol and hydrogen peroxide substrate solution. SWV analysis demonstrated a greater sensitivity and shorter analysis time than the widely used amperometric and differential‐pulsed voltammetric methods. The voltammetric characteristics of substrate and enzymatic product as well as the parameters of SWV analysis were optimized. Under optimized conditions, a linear response for HRP from 0.003 to 0.1 U/mL and a detection limit of 0.002 U/mL (1.25×10^?15 mol in 25 μL) were obtained with a good precision (RSD=8%; n=6). This rapid and sensitive HRP assay with microliter‐assay volume could be readily integrated to portable devices and point‐of‐care (POC) diagnosis applications.     

Streptavidin Modified Carbon Nanotube Based Graphite Electrode for Label‐Free Sequence Specific DNA Detection

Disposable graphite pencil electrodes (PGE) modified with multiwalled carbon nanotubes (MWCNTs)‐streptavidin (STR) conjugates were used for electrochemical monitoring of label‐free DNA hybridization. The surface morphology of PGE electrode before and after hybridization was characterized by scanning electron microscopy. Electrochemical impedance spectroscopy was used to monitor each step of the construction of the DNA biosensor. The biosensor was demonstrated to have excellent selectivity, being able to differentiate complementary sequences from a noncomplementary ones and in addition select the target sequence of DNA from a mixture of other DNA without loss in current sensitivity.     

Direct DNA Hybridization on the Single‐Walled Carbon Nanotubes Modified Sensors Detected by Voltammetry and Electrochemical Impedance Spectroscopy

Carboxylic acid functionalized single‐walled carbon nanotubes modified graphite sensors (SWCNT‐PGEs) were developed for electrochemical monitoring of direct DNA hybridization related to specific sequence of Hepatitis B virus, which substantially enhance the electrochemical transduction resulting from guanine oxidation signal comparison to bare PGEs. The performance characteristics of DNA hybridization on disposable CNT‐PGE were explored measuring the guanine signal in terms of optimum analytical conditions; probe and target concentration, hybridization time, and selectivity. The voltammetric results were also complemented with electrochemical impedance spectroscopy (EIS), that was used to characterize the successful construction of carbon nanotubes modification onto the surface of PGEs.     

A Sandwich‐Type Electrochemical Biosensor for Detection of BCR/ABL Fusion Gene Using Locked Nucleic Acids on Gold Electrode

In this study, a sandwich‐type electrochemical enzyme‐based LNA‐modified DNA biosensor was developed to detect relative gene in chronic Myelogenous Leukemia first. This biosensor is based on a ‘sandwich’ detection strategy, which involves a pair of probes (a capture probe immobilized at the electrode surface and a reporter probe labeled biotin as an affinity tag for avidin‐HRP) modified LNA. Since biotin can be connected with avidin‐HRP, this biosensor offers an enzymatically amplified electrochemical current signal for the detection of target DNA. This new pattern exhibits high sensitivity and selectivity, and this biosensor has been used for an assay of PCR real sample with satisfactory result.     

DNA Hybridization at Magnetic Nanoparticles with Electrochemical Stripping Detection

A simple and practical method for electrochemical DNA hybridization assay has been developed to take advantage of magnetic nanoparticles for ssDNA immobilization and zinc sulfide nanoparticle as oligonucleotide label. Magnetic nanoparticles were prepared by coprecipitation of Fe²⁺ and Fe³⁺ with NH₄OH, and then amino silane was coated onto the surface of magnetite nanoparticles. The magnetic nanoparticles have the advantages of easy preparation, easy surface modification and low cost. The target ssDNA with the phosphate group at the 5′ end was then covalently immobilized to the amino group of magnetite nanoparticles by forming a phosphoramidate bond in the presence of 1‐ethyl‐3‐(3‐dimeth‐ylaminopropyl)carbodiimide (EDAC). The zinc sulfide (ZnS) nanoparticle‐labeled oligonucleotides probe was used to identify the target ssDNA immobilized on the magnetic nanoparticles based on a specific hybridization reaction. The hybridization events were assessed by the dissolution of the zinc sulfide nanoparticles anchored on the hybrids and the indirect determination of the dissolved zinc ions by anodic stripping voltammetry (ASV) at a mercury film glassy carbon electrode (GCE). The proposed method couples the high sensitivity of anodic stripping analysis for zinc ions with effective magnetic separation for eliminating nonspecific adsorption effects and offers great promise for DNA hybridization analysis.     

Sensitive Electrochemical Detection of Oxalate at a Positively Charged Boron‐Doped Diamond Surface

Allyltriethylammonium bromide (ATAB) was covalently attached to the surface of hydrogen‐terminated boron‐doped diamond (BDD) thin films using a photochemical method to fabricate positively charged electrode surfaces. The anodic current for oxalate oxidation both in cyclic voltammetry and in flow‐injection analysis with amperometry was found to be up to two times larger at ATAB‐modified BDD (ATAB‐BDD) than at an unmodified BDD electrode, which may be based on the electrostatic interaction between the oxalate anion and the electrode surface. In addition, the stability of the electrochemical detection of oxalate was improved at the ATAB‐BDD electrode compared to the unmodified electrode.