Enhanced Oxidation of Simvastatin at a Multi‐Walled Carbon Nanotubes‐Dihexadecyl Hydrogen Phosphate Composite Modified Glassy Carbon Electrode and the Application in Determining Simvastatin in Pharmaceutical Dosage Forms

A sensitive electrochemical method for the determination of simvastatin (SV) was established, based on the enhanced oxidation of SV at a multi‐walled carbon nanotubes‐dihexadecyl hydrogen phosphate composite modified glassy carbon electrode (MWNTs‐DHP/GCE). The voltammetric studies showed that MWNTs instead of DHP or GCE could effectively catalyze the oxidation of SV. The dependence of oxidation current on SV concentration was explored under optimal conditions, which exhibited a good linear relationship in the range of 1.0×10^?7–7.5×10^?6 M. The detection limit of SV was also examined and a low value of 5.0×10^?8 M was obtained for 5 min accumulation (σ=3). This electrode was applied to the detection of SV in drug forms and the results were in accordance with those obtained by UV spectroscopy.     

Voltammetric Detection of Ofloxacin in Human Urine at a Congo Red Functionalized Water‐Soluble Carbon Nanotube Film Electrode

A simple physical method was developed for the surface modification and the solubilization of MWNTs in water by Congo red. The resulting water‐soluble MWNTs (MWNTs‐CR) can form stable and uniform films on solid supports when dried, which was used to fabricate MWNTs‐CR modified glassy carbon electrodes (MWNTs‐CR/GCE). Voltammetric studies showed that MWNTs‐CR/GCE exhibited a strong enhancement effect on the electrooxidation of ofloxacin. MWNTs‐CR films were also proved to possess overwhelming advantages as electrochemical sensing films over other commonly used MWNTs composite films (e.g., MWNTs‐DHP and MWNTs‐Nafion), reflected by the higher oxidation current, lower background and stronger accumulation capacity towards less soluble species. The sensitive oxidation of ofloxacin at MWNTs‐CR/GCE was used for the determination of ofloxacin. Under optimal conditions, the oxidation current was proportional to ofloxacin concentration in the ranges of 5×10^?8–3.0×10^?5 M. The detection limit of 9×10^?9 M was obtained for 350 s accumulation at open circuit (S/N=3). This method was applied to the determination of ofloxacin in human urine and the result was satisfying.     

Polymer/Iron Oxide Nanoparticle Modified Glassy Carbon Electrodes for the Enhanced Detection of Epinephrine

Novel electrochemical sensors for epinephrine (EP) based on a glassy carbon electrode (GCE) modified with a redox polymer film and iron (III) oxide nanoparticles (Fe₂O₃NP) have been developed. Two redox polymers‐poly(brilliant cresyl blue) (PBCB) and poly(Nile blue) (PNB), and two different architectures‐polymer/Fe₂O₃/GCE and Fe₂O₃/polymer/GCE were investigated. The electrochemical oxidation of epinephrine at the modified electrodes was performed by differential pulse voltammetry (DPV), in pH 7 electrolyte, and the analytical parameters were determined. The results show enhanced performance, more sensitive responses and lower detection limits at the modified electrodes, compared to other electrochemical epinephrine sensors reported in the literature. The best voltammetric response with the lowest detection limit was obtained for the determination of epinephrine at PBCB/Fe₂O₃/GCE. The novel sensors are reusable, with good reproducibility and stability, and were successfully applied to the determination of epinephrine in commercial injectable adrenaline samples.     

The fabrication of a colloidal gold-carbon nanotubes composite film on a gold electrode and its application for the determination of cytochrome c

Colloid Au (Au_nano) with a diameter of about 20 nm was prepared and used in combination with the multi-wall carbon nanotubes (MWNTs) to modify a gold electrode. Dihexadecylphosphate (DHP) dispersed in Au_nano aqueous solution was used to solubilize MWNTs. Deposition of Au_nano on MWNTs was realized as illustrated by TEM micrographs. The DHP formed a network that connected Au_nano and MWNTs to the gold electrode surface. The Au_nano–MWNTs–DHP composite film on the gold electrode surface was characterized by electrochemical impedance spectroscopy (EIS) and cyclic voltammmetry (CV). The composite film modified gold electrode was used to detect cytochrome c and a pair of well-defined redox waves was obtained. It was found that the composite film promoted the redox of horse heart cytochrome c and its effect was developed for the determination of cytochrome c.     

Impedance DNA Biosensor Using Electropolymerized Polypyrrole/Multiwalled Carbon Nanotubes Modified Electrode

In this paper, we present an electrochemical impedance‐based DNA biosensor by using a composite material of polypyrrole (PPy) and multiwalled carbon nanotubes (MWNTs) to modify glassy carbon electrode (GCE). The polymer film was electropolymerized onto GCE by cyclic voltammetry (CV) in the presence of carboxylic groups ended MWNTs (MWNTs‐COOH). Such electrode modification method is new for DNA hybridization sensor. Amino group ended single‐stranded DNA (NH₂‐ssDNA) probe was linked onto the PPy/MWNTs‐COOH/GCE by using EDAC, a widely used water‐soluble carbodiimide for crosslinking amine and carboxylic acid group. The hybridization reaction of this ssDNA/PPy/MWNTs‐COOH/GCE resulted in a decreased impedance, which was attributed to the lower electronic transfer resistance of double‐stranded DNA than single‐stranded DNA. As the result of the PPy/MWNTs modification, the electrode obtained a good electronic transfer property and a large specific surface area. Consequently, the sensitivity and selectivity of this sensor for biosensing DNA hybridization were improved. Complementary DNA sequence as low as 5.0×10^?12 mol L^?1 can be detected without using hybridization marker or intercalator. Additionally, it was found that the electropolymerization scan rate was an important factor for DNA biosensor fabrication. It has been optimized at 20 mV s^?1.     

A novel amperometric sensor for the determination of nitric oxide, and its application in rat liver cells

A novel amperometric nitric oxide sensor with a wide linear range, low detection limit and fast response time was developed. The sensor was fabricated using a poly-brilliant cresyl blue (PBCB)/Nafion film modified glassy carbon electrode (GCE). The PBCB on the working GCE surface dramatically improves the oxidation response of nitric oxide and lowers the required potential for the two-step oxidation of NO. Otherwise, Nafion coated onto the film electrode surface does not only improve the selectivity of the sensor, but also further lowers the active energy of the direct three-electron oxidation of NO to nitrate. The effect of the preanodic time and the film thickness of the electropolymerization on the nitric oxide response as well as the volume of Nafion coated onto the surface and the potential for amperometric detection were optimized. This novel sensor has been applied to the determination of NO released from rat liver cells, and the result is satisfactory. Correspondence: Sheng Shui Hu, Department of Chemistry, Wuhan University, Wuhan 430072, P.R. China     

Amperometric Biosensors for Glucose Based on Layer‐by‐Layer Assembled Functionalized Carbon Nanotube and Poly (Neutral Red) Multilayer Film

Abstract

Multiwalled carbon nanotubes (MWNTs) were treated with a mixture of concentrated sulfuric and nitric acid to introduce carboxylic acid groups to the nanotubes. Conducting polymer film was prepared by electrochemical polymerization of neutral red (NR). By using a layer‐by‐layer method, homogeneous and stable MWNTs and poly (neutral red) (PNR) multilayer films were alternately assembled on glassy carbon (GC) electrodes. With the introduction of PNR, the MWNTs/PNR multilayer film system showed synergy between the MWNTs and PNR, with a significant improvement of redox activity due to the excellent electron‐transfer ability of carbon nanotubes (CNTs) and PNR. The electropolymerization is advantageous, providing both prolonged long‐term stability and improved catalytic activity of the resulting modified electrodes. The MWNTs/PNR multilayer film modified glassy carbon electrode allows low potential detection of hydrogen peroxide with high sensitivity and fast response time. As compared to MWNTs and PNR‐modified GC electrodes, the magnitude of the amperometric response of the MWNTs/PNR composite‐modified GC electrode is more than three‐fold greater than that of the MWNTs modified GC electrode, and nine‐fold greater than that of the PNR‐modified GC electrode. With the immobilization of glucose oxidase onto the electrode surface using glutaric dialdehyde, a biosensor that responds sensitively to glucose has been constructed. In pH 6.98 phosphate buffer, nearly interference‐free determination of glucose has been realized at ?0.2 V vs. SCE with a linear range from 50 µM to 10 mM and response time <10s. The detection limit was 10 µM glucose (S/N=3).     

Electrochemical Biosensing Platforms Using Phthalocyanine‐Functionalized Carbon Nanotube Electrode

Iron‐phthalocyanines (FePc) are functionalized at multi‐walled carbon nanotubes (MWNTs) to remarkably improve the sensitivity toward hydrogen peroxide. We constructed a highly sensitive and selective glucose sensor on FePc‐MWNTs electrode based on the immobilization of glucose oxidase (GOD) on poly‐o‐aminophenol (POAP)‐electropolymerized electrode surface. SEM images indicate that GOD enzymes trapped in POAP film tend to deposit primarily on the curved tips and evenly disperse along the sidewalls. The resulting GOD^@POAP/FePc‐MWNTs biosensor exhibits excellent performance for glucose with a rapid response (less than 8 s), a wide linear range (up to 4.0×10^?3 M), low detection limits (2.0×10^?7 M with a signal‐to‐noise of 3), a highly reproducible response (RSD of 2.6%), and long‐term stability (120 days). Such characteristics may be attributed to the catalytic activity of FePc and carbon nanotube, permselectivity of POAP film, as well as the large surface area of carbon nanotube materials.     

Electrochemical Oxidation of Epinephrine and Uric Acid at a Layered Double Hydroxide Film Modified Glassy Carbon Electrode and Its Application

Increasing attention has been paid to layered double hydroxide (LDH) film modified electrode attributing to its desirable properties for fabrication of electrochemical sensor. In this paper, the Zn‐Al LDH film modified glassy carbon electrode was characterized by electrochemical methods. The enhanced electrocatalytic currents and well‐separated potentials for epinephrine (EP) and uric acid (UA) were observed at the as‐prepared electrode. Under selected condition, the differential pulse voltammetry response of the modified electrode to EP (or UA) shows a linear concentration range of 0.5 μM to 0.3 mM (or 2 μM to 0.4 mM) in the presence of 10.0 μM UA (or 20.0 μM EP). At a signal‐to‐noise ratio of 3, the calculated limits of detection are 0.13 μM and 0.66 μM, respectively. The proposed method has been performed to successfully detect EP and UA in analysis of real samples, such as in EP injection solution and human urine samples.     

A Polypyrrole‐Imprinted Electrochemical Sensor Based on Nano‐SnO2/Multiwalled Carbon Nanotubes Film Modified Carbon Electrode for the Determination of Oleanolic Acid

A sensitive molecularly imprinted electrochemical sensor with specific recognition ability for oleanolic acid was synthesized by modification of multiwalled carbon nanotubes (MWNTs) decorated with tin oxide nanoparticles (nano‐SnO₂/MWNTs) and polypyrrole‐imprinted polymer on a carbon electrode. The morphology and electrochemical performance of the imprinted sensor were investigated by using scanning electron microscope (SEM), X‐ray diffraction (XRD), cyclic voltammetry (CV), linear sweep voltammetry (LSV) and amperometric i–t curve. The results showed that the imprinted sensor displayed excellent selectivity toward oleanolic acid. A linear relationship between the response currents and oleanolic acid concentrations ranging from 5.0×10^?8 g/L to 2.0×10^?5 g/L was obtained for the imprinted sensor. The limit of detection (LOD) of the imprinted sensor toward oleanolic acid was calculated as 8.6×10^?9 g/L at a signal to noise ratio (S/N) of 3. This imprinted sensor was successfully applied to the determination of oleanolic acid in Acitinidia deliciosa root samples.     

Enhanced Electrocatalytic Activity of Ni‐CNT Nanocomposites for Simultaneous Determination of Epinephrine and Dopamine

A promising electrochemical sensor based nickel‐carbon nanotube (Ni‐CNT) modified on glassy carbon (GC) electrode had been developed and the properties of the modified electrode were characterized by multispectroscopic analysis. The fabricated sensor (GC/Ni‐CNT) electrode was utilized to determine the catecholamines such as epinephrine and dopamine simultaneously. Differential pulse voltammetry and amperometry were used to verify the electrochemical behavior of the studied compounds. The GC/Ni‐CNT based amperometric sensor showed a wide linear range and low detection limit with high analytical sensitivity of 8.31 and 6.61 μA μM^?1 for EP and DA, respectively which demonstrates better characteristics compared to other electrodes reported in the literature. Further, no significant change in amperometric current response was observed in presence of biological interference species such as glucose, cysteine, citric acid, uric acid and ascorbic acid in the detection of EP and DA. The utility of this GC/Ni‐CNT electrode was well established for the determination of EP and DA in human urine samples.     

Electroanalysis of Dopamine at RuO2 Modified Vertically Aligned Carbon Nanotube Electrode

Electrochemical behavior of dopamine at the RuO₂‐modified vertically aligned carbon nanotubes electrode was investigated by cyclic voltammetry, differential pulse voltammetry and chronoamperometry. The RuO₂‐modified carbon nanotube electrode showed higher electrocatalytic activity towards the oxidation of dopamine than the MWNTs electrode in 0.10 M phosphate buffer solution. At an applied potential of +0.4 V, the RuO₂/MWNTs electrode exhibited a wide detection range up to 3.6×10^?3 M with detection limit of 6.0×10^?8 M (signal/noise=3) for dopamine determination. Meanwhile, the optimized sensor for dopamine displayed a sensitivity of 83.8 μA mM^?1 and response time of 5 s with addition of 0.20 mM dopamine. In addition, DPV experiment revealed that interfering species such as ascorbic acid and uric acid could be effectively avoided. The RuO₂/MWNTs electrode presents stable, highly sensitive, favorable selectivity and fast amperometric response of dopamine.     

Voltammetric Determination of Hydroquinone using β‐Cyclodextrin/Poly(N‐Acetylaniline)/Carbon Nanotube Composite Modified Glassy Carbon Electrode

Abstract

An electrochemical sensor for hydroquinone (HQ) using β‐cyclodextrin/poly(N‐acetylaniline)/carbon nanotube composite (β‐CD/PAA/MWNTs) modified glassy carbon electrode has been successfully developed. Based on the synergistic effect of MWNTs and conducting PAA polymer and the accumulation effect of β‐CD, the analytical response of the β‐CD/PAA/MWNTs film to the electrochemical behavior of HQ was better than that of a β‐CD/PAA film, a PAA/MWNTs film, a PAA film, or a bare glassy carbon (GC) electrode. Under the conditions chosen, the anodic currents increased linearly with HQ concentration from 1×10^?6 to 5×10^?3 mol l^?1 and the detection limit was 8×10^?7 mol l^?1. This electrochemical sensor showed excellent reproducibility, stability and recovery for the determination of HQ.     

碳纳米管修饰电极上沙丁胺醇电催化氧化研究

将多壁碳纳米管(MWNT)分散在疏水性表面活性剂双十六烷基磷酸(DHP)溶液中形成稳定、均相的分散液,然后制备多壁碳纳米管-DHP复合膜修饰玻碳电极(MWNT-DHP/GCE).应用方波伏安法研究了沙丁胺醇在修饰电极上的电化学行为,结果表明,碳纳米管复合膜修饰电极对沙丁胺醇的氧化有良好的电催化活性,其氧化反应为一电子一质子过程,氧化电位比裸玻碳电极负移40 mV,峰电流增加了4.5倍.在最佳测试条件下,氧化峰电流与沙丁胺醇浓度在8.3×10-7~3.3×10-6mol/L范围内呈良好线性关系,开路富集2min,检出限达1.8×10-7mol/L.该修饰电极具有良好的重现性、稳定性.     

Preparation and properties of polysiloxane grafting multi‐walled carbon nanotubes/polycarbonate nanocomposites

Carboxyl multi‐wall carbon nanotubes (MWNTs‐COOH) were grafted by diaminopropyl terminated dimethylpolysiloxane (DPD) to the modified MWNTs‐COOH (MWNTs‐DPD). The surface structure and thermal stability of MWNTs‐DPD and MWNTs‐COOH were characterized using Fourier‐transform infrared spectroscopy, X‐ray photoelectron spectroscopy (XPS), and thermogravimetric analysis (TGA). Then PC/MWNTs‐COOH and PC/MWNTs‐DPD nanocomposites were prepared by the solution method and melt extrusion method. The mechanical properties, transmission electron microscopy (TEM), TGA, limiting oxygen index (LOI), UL‐94 test, and permittivity test were used to evaluate the properties of the composites. The results showed that the MWNTs‐DPD was dispersed well in the PC matrix, and its tensile strength, flexual strength, flexural modulus, and flame retardancy were better than that of PC/MWNTs‐COOH. MWNTs‐DPD can improve the electrical properties of the nanocomposites at the low loading in PC. Copyright © 2010 John Wiley & Sons, Ltd.     

盐酸普萘洛尔分子印迹电化学传感器的制备与研究

以盐酸普萘洛尔为目标模板分子,通过电聚合多巴胺,在多壁碳纳米管修饰的玻碳电极表面制备了对目标分子有特异响应的分子印迹电化学传感器.利用扫描电子显微镜、循环伏安法和差示脉冲伏安法对此传感器的表面形貌及性能进行了表征,并且优化了检测条件,研究了印迹传感器对模板分子及其结构类似物的选择性响应.结果表明:此传感器具有较好的选择性响应,而且碳纳米管的存在显著提高了传感器的灵敏度.盐酸普萘洛尔的浓度在0.20～100 μmol/L范围内与峰电流呈良好的线性关系;检出限为2.53×10-8 mol/L(S/N=3).此传感器还具有良好的稳定性和重现性.     

Electrochemical Determination of Tetracycline Using Molecularly Imprinted Polymer Modified Carbon Nanotube‐Gold Nanoparticles Electrode

This paper reports the use of a tetracycline (TC) sensor constructed from a combination of molecularly imprinted polymer (MIP) and gold nanoparticles modified multiwall carbon nanotubes (MWNTs‐GNPs). The results demonstrated that the amount of recognition sites in the polymer was significantly increased and the electron transfer ability of the sensor was improved. The relationship between the peak current and the TC concentration was linear in the range from 0.1 to 40 mg L^?1, and the detection limit was 0.04 mg L^?1 (S/N=3). The peak current to TC was 4.3, 6.2 and 6.8 times larger than that of oxytetracycline, chloramphenicol and nafcillin, respectively. Thus, the combination of MIP and MWNTs‐GNPs provides a sensitive and selective electrochemical detection method for tetracycline.     

Synthesis and self‐assembly of polystyrene‐grafted multiwalled carbon nanotubes with a hairy‐rod nanostructure

Polystyrene‐grafted multiwalled carbon nanotubes (PS‐g‐MWNTs) with a hairy‐rod nanostructure were synthesized by the in situ free‐radical polymerization of styrene in the presence of multiwalled carbon nanotubes (MWNTs) terminated with vinyl groups. To quantitatively study the molecular weight and composition of polystyrene (PS) chains in PS‐g‐MWNTs, PS‐g‐MWNTs were fully defunctionalized by hydrolysis. The results showed that 1 of every 100 carbon atoms in MWNTs was functionalized at the tips and outer walls of the carbon nanotubes and grafted by PS with a weight‐average molecular weight of 9800 g/mol; therefore, a uniform thin layer (ca. 8–10 nm) of a PS shell was formed on the outer wall of MWNTs. PS‐g‐MWNTs were soluble in dimethylformamide and tetrahydrofuran. The thermal stability and glass‐transition temperature of PS in PS‐g‐MWNTs were obviously increased. Nanopins were formed on the glass substrates by the self‐assembly of PS‐g‐MWNTs, and the dewetting effect between the glass substrate and PS chains covered MWNTs during the evaporation of the solution. Both the length and diameter of the nanopins increased with the solution concentration. When PS‐g‐MWNTs were compression‐molded, MWNTs were dispersed uniformly in the PS matrix and formed good networks, such as circlelike and starlike structures, because of the entanglements of hairy PS chains on MWNTs. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3869–3881, 2006     

Mediatorless amperometric bienzyme glucose biosensor based on horseradish peroxidase and glucose oxidase cross-linked to multiwall carbon nanotubes

We report on a bienzyme-channeling sensor for sensing glucose without the aid of mediator. It was fabricated by cross-linking horseradish peroxidase (HRP) and glucose oxidase (GOx) on a glassy carbon electrode modified with multiwalled carbon nanotubes (MWNTs). The bienzyme was cross-linked with the MWNTs by glutaraldehyde and bovine serum albumin. The MWNTs were employed to accelerate the electron transfer between immobilized HRP and electrode. Glucose was sensed by amperometric reduction of enzymatically generated H₂O₂ at an applied voltage of ?50 mV (vs. Ag/AgCl). Factors influencing the preparation and performance of the bienzyme electrode were investigated in detail. The biosensor exhibited a fast and linear response to glucose in the concentration range from 0.4 to 15 mM, with a detection limit of 0.4 mM. The sensor exhibited good selectivity and durability, with a long-term relative standard deviation of <5 %. Analysis of glucose-spiked human serum samples yielded recoveries between 96 and 101 %.

New Nanocomposite Based on Prussian Blue Nanoparticles/Carbon Nanotubes/Chitosan and Its Application for Assembling of Amperometric Glucose Biosensor

Abstract

A new nanocomposite was developed by combination of prussian blue (PB) nanoparticles and multiwalled carbon nanotubes (MWNTs) in the matrix of biopolymer chitosan (CHIT). The PB and MWNTs had a synergistic electrocatalytic effect toward the reduction of hydrogen peroxide. The CHIT/MWNTs/PB nanocomposite‐modified glassy carbon (GC) electrode could amplify the reduction current of hydrogen peroxide by ～35 times compared with that of CHIT/MWNTs/GC electrode and reduce the response time from ～60 s for CHIT/PB/GC to 3 s. Besides, the CHIT/MWNTs/PB nanocomposite‐modified GC electrode could reduce hydrogen peroxide at a much lower applied potential and inhibit the responses of interferents such as ascorbic acid (AA) uric acid (UA) and acetaminophen (AC). With glucose oxidase (GOx) as an enzyme model, a new glucose biosensor was fabricated. The biosensor exhibited excellent sensitivity (the detection limit is down to 2.5 µM), fast response time (less than 5 s), wide linear range (from 4 µM to 2 mM), and good selection.