Direct Detection of DNA and DNA‐Ligand Interaction by Impedance Spectroscopy

In this work we present an impedimetric detection system for DNA‐ligand interactions. The sensor system consists of thiol‐modified single‐stranded DNA chemisorbed to gold. Impedance measurements in the presence of the redox system ferri‐/ferrocyanide show an increase in charge transfer resistance (R_ct) after hybridisation of a complementary target. Different amounts of capture strands, used for gold electrode modification, result in surface coverages between 3 and 15 pmol/cm² ssDNA. The relative change in R_ct upon hybridisation increases with increasing amount of capture probe on the electrode from 1.5‐ to 4.5‐fold. Impedimetric detection of binding events of a metal‐intercalator ([Ru(phen)₃]²⁺) and a groove binder (spermine) to double‐stranded DNA is demonstrated. Binding of [Ru(phen)₃]²⁺ and spermine exhibits a decrease in charge transfer resistance. Here, the ligand’s interaction leads to electrostatic shielding of the negatively charged DNA backbone. The impedance changes have been evaluated in dependence on the concentration of both DNA binders. Furthermore, the association of a single‐stranded binding protein (SSBP) is found to cause an increase in charge transfer resistance only when incubated with single‐stranded DNA. The specific binding of an anti‐dsDNA antibody to the dsDNA‐modified electrode surface decreases in contrast the interfacial impedance.     

Sequence Specific Electrochemical DNA Detection Based on Solution‐Phase Competitive Hybridization

We report a novel electrochemical method for detecting sequence‐specific DNA based on competitive hybridization that occurs in a homogeneous solution phase instead of on a solution‐electrode interface as in previously reported competition‐based electrochemical DNA detection schemes. The method utilizes the competition between the target DNA (t‐DNA) and a ferrocene‐labeled peptide nucleic acid probe (Fc‐PNA) to hybridize with a probe DNA (p‐DNA) in solution. The neutral PNA backbone and the electrostatic repulsion between the negatively‐charged DNA backbone and the negatively‐charged electrode surface are then exploited to determine the result of the competition through measurement of the electrochemical signal of Fc. Upon the introduction of the t‐DNA, the stronger hybridization affinity between the t‐DNA and p‐DNA releases the Fc‐PNA from the Fc‐PNA/p‐DNA hybrid, allowing it to freely diffuse to the negatively charged electrode to produce a significantly enhanced electrochemical signal of Fc. Therefore, the presence of the t‐DNA is indicated by the appearance or enhancement of the electrochemical signal, rendering a signal‐on DNA detection, which is less susceptible to false positive and can produce more reliable results than signal‐off detection methods. All the competitive hybridizations occur in a homogeneous solution phase, resulting in very high hybridization efficiency and therefore extremely short assay time. This simple and fast signal‐on solution‐competition‐based electrochemical DNA detection strategy has promising potential to find application in fields such as nucleic acid‐based point‐of‐care testing.     

超疏水多孔硅的制备及表面稳定性

在加热条件下采用氢化硅烷化反应对多孔硅表面进行改性,通过扫描电子显微镜、红外光谱及元素分析等手段表征了多孔硅改性前后的结构和组成,研究了不同反应时间对其性能的影响.结果表明,反应3 h后制得了超疏水表面的多孔硅,其在碱性及空气环境中具有良好的稳定性.     

Dual‐Genic Hybridization Sensor Employing Electrochemical Impedance Spectroscopy

A dual‐genic impedimetric sensor for DNA hybridization detection is proposed for the first time. Two different single‐stranded DNA probes (P₁=d(pA)₂₀ and P₂=d(pG)₂₀) were immobilized onto the graphite‐epoxy electrode surface and impedimetric measurements were performed. Hybridization experiments were carried out employing complementary targets (P₁^c=d(pT)₂₀ or P₂^c=d(pC)₂₀) alone, or combined (P₁^c+P₂^c), as well as noncomplementary DNA sequences. As from the direct observation of impedance spectra it was not possible to resolve the binary gene mixture, the use of artificial neural networks (ANN) was proposed for extracting significant information to get desired results.     

PAMAM Dendrimers‐Based DNA Biosensors for Electrochemical Detection of DNA Hybridization

Gold electrodes were modified with submonolayers of mercaptoacetic acid (RSH) and further reacted with poly(amidoamine) (PAMAM) dendrimers (generation 4.0) to obtain thin films, on which DNA probe was later immobilized to afford a stable recognition layers. The characterization of the PAMAM/RSH‐modified electrode was investigated by cyclic voltammetry (CV) and electrochemical impedance measurement. Differential pulse voltammogram (DPV) measurement was used to monitor DNA hybridization with daunomycin (DNR) as indicator. Experiments carried out with these novel materials not only showed an improved DNA attachment quantity on the dendrimers‐modified electrodes compared to DNA sensors with oligonucleotides directly immobilized on Au electrodes, but also exhibited a high selectivity, sensitivity and stability for the measurement of DNA hybridization.     

Synthesis of Nucleobase‐Functionalized Carbon Nanotubes and Their Hybridization with Single‐Stranded DNA

For the first time ssDNA (25‐aptamer of mixed dA, dT, dG, and dC) was wrapped around functionalized single‐walled carbon nanotubes (SWCNTs), whose external surfaces were attached to multiple triazole‐(ethylene glycol)‐dA ligands. This method of hybridization involved the formation of hydrogen bonds between dT of ssDNA and dA of functionalized SWCNTs. It deviates from the reported π–π stacking between the nucleobases of DNA and the external sidewalls of nanotubes. The structural properties of the functionalized SWCNTs and its ssDNA complex were characterized by spectroscopic (including CD and Raman), thermogravimetric, and microscopic (TEM) methods. The results thus obtained establish a new platform of DNA delivery by use of nanotubes as a new vehicle with great potential in biomedical applications and drug development.     

An Attenuated Total Reflection FT‐IR Spectroscopic Study of Polyamide 6/Clay Nanocomposite Fibers

Summary: An attenuated total reflection FT‐IR spectroscopic study of the hydrogen bonding, molecular orientation, and crystalline phase transitions in polyamide 6 (PA6)/clay nanocomposite (PA6CN) fibers is proposed. The nanoscale dispersed clay layers lowered the degree of order of hydrogen bonding, affected little the hydrogen bonding strength, and increased the degree of orientation of both γ crystalline and overall domains. A partial γ to α phase transition appeared with time.

Schematic representation of the attenuated total reflection FT‐IR dichroism measurements.     

Direct DNA Hybridization on the Single‐Walled Carbon Nanotubes Modified Sensors Detected by Voltammetry and Electrochemical Impedance Spectroscopy

Carboxylic acid functionalized single‐walled carbon nanotubes modified graphite sensors (SWCNT‐PGEs) were developed for electrochemical monitoring of direct DNA hybridization related to specific sequence of Hepatitis B virus, which substantially enhance the electrochemical transduction resulting from guanine oxidation signal comparison to bare PGEs. The performance characteristics of DNA hybridization on disposable CNT‐PGE were explored measuring the guanine signal in terms of optimum analytical conditions; probe and target concentration, hybridization time, and selectivity. The voltammetric results were also complemented with electrochemical impedance spectroscopy (EIS), that was used to characterize the successful construction of carbon nanotubes modification onto the surface of PGEs.     

A G‐Quadruplex/Hemin Complex with Switchable Peroxidase Activity by DNA Hybridization

A hemin‐binding DNA G‐quadruplex (also known as a hemin aptamer or DNAzyme) has been previously reported to be able to enhance the peroxidase activity of hemin. In this work, we described a DNAzyme structure that had an effector‐recognizing part appearing as a single stranded DNA linkage flanked by two split G‐quadruplex halves. Hybridization of the single stranded part in the enzyme with a perfectly matched DNA strand (effector) formed a rigid DNA duplex between the two G‐quadruplex halves and thus efficiently suppressed the enzymatic activity of the G‐quadruplex/hemin complex, while the mismatched effector strand was not able to regulate the peroxidase activity effectively. With 2,2′‐azinobis(3‐ethylbenzthiazoline)‐6‐sulfonic acid (ABTS) as an oxidizable substrate, we were able to characterize the formation of the re‐engineered G‐quadruplex/hemin complex and verify its switchable peroxidase activity. Our results show that the split G‐quadruplex is an especially useful module to design low‐cost and label‐free sensors toward various biologically or environmentally interesting targets.     

Nano‐Gold Modified Genosensor for Direct Detection of DNA Hybridization

In this paper, nano‐gold modified carbon paste electrode (NGMCPE) was employed to develop an electrochemical DNA hybridization biosensor. The proposed sensor was made up by immobilization of 15‐mer single stranded oligonucleotide probe for detection of target DNA. Hybridization detection relies on the alternation in guanine oxidation signal following hybridization of the probe with complementary genomic DNA. The guanine oxidation was monitored using differential pulse voltammetry (DPV). Different factors such as activation potential, activation time and probe immobilization conditions were optimized. The selectivity of the sensor was investigated by non‐complementary oligonucleotides. Diagnostic performance of the biosensor was described and the detection limit was found 1.9 × 10^?13 M at the NGMCPE surface. All of the investigations were performed in both CPE and NGMCPE and finally their results were compared.     

Fluorescent Core‐Shell Star Polymers Based Bioassays for Ultrasensitive DNA Detection by Surface Plasmon Fluorescence Spectroscopy

Multilayers containing a perylene diimide labelled star polymers (FSP) donor adjacent to phosphorus dendrimer layer on a silver substrate were constructed by layer by layer (LBL) approach. Using Surface Plasmon Enhanced Fluorescence Spectroscopy (SPFS) technique, a time‐resolved ultrasensitive and selective detection of DNA targets relying on enhanced optical fields associated with energy transfer (ET) were achieved under the excitation at 543 nm. The detection limit is about 8 orders of magnitude better than the achieved one under the excitation at 632 nm, which is ascribed to no energy transfer from the donor to the acceptor under the excitation at 632 nm, resulting in much weak detection signal in turn.

     

化学氧化对多孔硅表面态和光致发光的影响

自1990年英国科学家Canham发现室温下多孔老（poroussilicon缩写为PS）的可见光区光致发光以来，在世界范围内迅速形成了一股强大的多孔硅研究热．硅是间接禁带半导体．禁带宽度为1．11eV，不可能在可见区发光．对于多孔硅在可见区的强烈荧光发射及其形成，Canham和Lehamm等分别建议可用量子线的尺寸限制效应未解释[1,2]．但Tsai和Hance等用FTIR研究经过后处理的多孔老样品[3]，认为多孔硅的发光与表面的硅氢化物相关，并提出硅的二氢化物SiH2的浓度与荧光强度相关．关于多孔硅的发光机制，还有非晶态发光[4]等说法．因止匕多孔硅的发…     

ATR‐FTIR Kretschmann spectroscopy for interfacial studies of a hidden aluminum surface coated with a silane film and epoxy II. Analysis by integrated ATR‐FTIR and EIS during exposure to electrolyte with complementary studies by in situ ATR‐FTIR and in situ IRRAS

The destabilization of the interface between a polymer and a metal surface is of considerable interest in several application areas, including the ongoing research on environmentally friendly pretreatments as a replacement for the Cr(VI)‐containing systems where the understanding of mechanisms and performance of a confined metal/polymer interface is of utmost importance. Processes at hidden interfaces are, however, difficult to analyze in detail and at relevant climatic conditions. This study has been divided in two parts, where the subject of Part I is the surface characterization by ATR‐FTIR Kretschmann and IRRAS spectroscopy of aluminum coated with an amino‐functional silane, and the interfacial analysis by ATR‐FTIR Kretschmann after further application of an epoxy film. This second part describes the interaction between the coated sample and an electrolyte. The analysis is performed by integrated in situ ATR‐FTIR Kretschmann and EIS, which requires model systems with evaporated metal films on an internal reflection element. Complementary analyses were also conducted on substrates in the absence of the metal film, and or in the absence of an epoxy top‐coat, respectively. Changes in the interfacial region were observed and assigned to the water uptake including swelling of the epoxy, and the formation of aluminium oxidation and hydration products. Complementary studies allowed the distinction between water uptake in the silane film and the epoxy, respectively, as well as reformations of the siloxane network. Copyright © 2011 John Wiley & Sons, Ltd.     

Enhanced Electrochemical Detection of DNA Hybridization Based on Au/MWCNTs Nanocomposites

Abstract

The nanocomposites of gold nanoparticles and multi‐walled carbon nanotubes (MWCNTs) have been applied in the enhanced electrochemical detection of DNA hybridization. Gold nanoparticles coated on MWCNTs uniformly were synthesized by simply one step reaction. Target DNA was detected by the peak current difference of differential pulse voltammetry (DPV) signals of the electroactive indicator methylene blue (MB) before and after hybridization on the Au/MWCNTs modified glass carbon electrode (GCE). Due to the excellent electrical conductivity of the novel matrix, the biosensor revealed high sensitivity with the detection level down to 1.0 pM. Excellently selectivity and reproducibility were also discussed.     

Ag Deposition Forms and Uniformity on Porous Silicon by Electrochemical Method

The electrochemical deposition technique was applied to achieve porous silicon (PS) surface passivated with Ag deposition for improving the properties of PS photoluminescence. The relation of Ag depositing forms to current density and the effect of PS hydrophilic surface on deposition uniformity were investigated. The experimental results indicated that there were two critical current densities (maximum and minimum) in which Ag was absent and electroplated on PS surface correspondingly, and the range of current density for deposition of Ag on porous silicon was from 50 μA/cm² to 400 μA/cm². The process of changing PS surface from hydrophobic into hydrophilic had positive effect on Ag deposition uniformity. Under the same experimental conditions, PS hydrophobic surface presented uneven Ag deposition.However, hydrophilic surface treated with SC-1 solution was even. Finally, the effect of PS surface passivation with Ag even deposition on photoluminescence intensity and stabilization of PS was studied. It was discovered that Ag passivation inhibited the degradation of PL intensity effectively. In addition, excessive Ag deposition had a quenching effect on room-temperature visible photoluminescence of PS.     

Impedance‐Based DNA Biosensor Employing Molecular Beacon DNA as Probe and Thionine as Charge Neutralizer

In this paper, we present an impedance‐based DNA biosensor using thionine intercalation to amplify DNA hybridization signal. Beacon single‐stranded DNA (ssDNA) probe and mercaptoacetic acid were self‐assembled onto a Au electrode by forming Au? S bonds. These beacon ssDNAs were hybridized with the complementary sequences around the loop structure. Then thionine was intercalated into the double‐stranded DNA (dsDNA) immobilized on the Au electrode surface. Due to the neutralization of the negative charges of dsDNA by the intercalated thionine, the electronic transfer resistance (R_et) of the DNA modified Au electrode was significantly diminished. Herein, the decreased value of R_et resulted from the thionine intercalating into dsDNA was employed as the hybridization signal. SDS was used to reduce the unspecific adsorption between ssDNA and thionine. Several experimental conditions, including the surface coverage of ssDNA probe on Au electrode, the hybridization temperature and time were all optimized. Moreover, the hybridization reactions of the unstructured linear ssDNA probe and the structured beacon ssDNA probe with their complementary sequences were compared in this work. The sensitivity of the presented DNA biosensor highlighted that the intercalation of thionine into dsDNA was an efficient approach to amplify the hybridization signal using impedance detection technique. Additionally, in this DNA biosensing protocol, beacon ssDNA has a good ability to distinguish target DNA sequences. This results in a higher specificity than using traditional unstructured DNA probe.     

Determination of DNA Hybridization on Gold Nanoparticle Conjugated Polystyrene Particle Thin Film Using Attenuated Total Reflectance Fourier Transform Infrared Spectroscopy

Attenuated total reflectance Fourier transform infrared spectroscopy was used to detect DNA hybridization on a polystyrene conjugated gold nanoparticle thin film. The gold nanoparticles were synthesized on the surface of poly(ethylenimine) coated polystyrene particles by citrate reduction. Single-stranded DNA was then immobilized on the nanoparticle surface via thiol bonding. Ultraviolet-visible spectrometry was used to monitor the conjugation of the nanoparticles on polystyrene particles and the immobilization of a single-stranded DNA probe. The morphology of the polystyrene-gold nanoparticle thin film was characterized using scanning electron microscopy and showed successful conjugation and immobilization. The infrared spectra obtained from the hybridization showed features of DNA structure and peak shifts at 1657 cm^?1 compared to the non-complementary DNA due to changes in hydrogen bonding between N-H and C?O of complimentary bases pairs. The peaks at 1067, 975, 920, and 859 cm^?1, which were shifted to lower wavenumbers in the polystyrene-gold nanoparticle probe and target DNA, indicated hydrogen bonding formation between N-H and N of complimentary base pairs. ATR-FTIR spectroscopy provided simple, fast, and portable label-free detection of target DNA sequence on the polystyrene-gold nanoparticle thin film.     

Probing Biomolecular Interactions at Conductive and Semiconductive Surfaces by Impedance Spectroscopy: Routes to Impedimetric Immunosensors,DNA‐Sensors,and Enzyme Biosensors

Impedance spectroscopy is a rapidly developing electrochemical technique for the characterization of biomaterial‐functionalized electrodes and biocatalytic transformations at electrode surfaces, and specifically for the transduction of biosensing events at electrodes or field‐effect transistor devices. The immobilization of biomaterials, e.g., enzymes, antigens/antibodies or DNA on electrodes or semiconductor surfaces alters the capacitance and interfacial electron transfer resistance of the conductive or semiconductive electrodes. Impedance spectroscopy allows analysis of interfacial changes originating from biorecognition events at electrode surfaces. Kinetics and mechanisms of electron transfer processes corresponding to biocatalytic reactions occurring at modified electrodes can be also derived from Faradaic impedance spectroscopy. Different immunosensors that use impedance measurements for the transduction of antigen‐antibody complex formation on electronic transducers were developed. Similarly, DNA biosensors using impedance measurements as readout signals were developed. Amplified detection of the analyte DNA using Faradaic impedance spectroscopy was accomplished by the coupling of functionalized liposomes or by the association of biocatalytic conjugates to the sensing interface providing biocatalyzed precipitation of an insoluble product on the electrodes. The amplified detections of viral DNA and single‐base mismatches in DNA were accomplished by similar methods. The changes of interfacial features of gate surfaces of field‐effect transistors (FET) upon the formation of antigen‐antibody complexes or assembly of protein arrays were probed by impedance measurements and specifically by transconductance measurements. Impedance spectroscopy was also applied to characterize enzyme‐based biosensors. The reconstitution of apo‐enzymes on cofactor‐functionalized electrodes and the formation of cofactor‐enzyme affinity complexes on electrodes were probed by Faradaic impedance spectroscopy. Also biocatalyzed reactions occurring on electrode surfaces were analyzed by impedance spectroscopy. The theoretical background of the different methods and their practical applications in analytical procedures were outlined in this article.     

Electrochemical Detection of DNA Hybridization Based on the Probe Labeled with Carbon‐Nanotubes Loaded with Silver Nanoparticles

A sensitive electrochemical method for the detection of DNA hybridization based on the probe labeled with multiwall carbon‐nanotubes (MWNTs) loaded with silver nanoparticles (Ag‐MWNTs) has been developed. MWNTs were electroless‐plated with a large number of silver nanoparticles to form Ag‐MWNTs. Probe single strand DNA (ss‐DNA) with a thiol group at the 3′‐terminal labeled with Ag‐MWNTs by self‐assembled monolayer (SAM) technique was employed as an electrochemical probe. Target ss‐DNA with a thiol group was immobilized on a gold electrode by SAM technique and then hybridized with the electrochemical probe. Binding events were monitored by differential pulse voltammetric (DPV) signal of silver nanoparticles. The signal difference permitted to distinguish the match of two perfectly complementary DNA strands from the near perfect match where just three base pairs were mismatched. There was a linear relation between the peak current at +120 mV (vs. SCE) and complementary target ss‐DNA concentration over the range from 3.1×10^?14 to 1.0×10^?11 mol/L with a detection limit of 10 fmol/L of complementary target ss‐DNA. The proposed method has been successfully applied to detection of the DNA sequence related to cystic fibrosis. This work demonstrated that the MWNTs loaded with silver nanoparticles offers a great promising approach for sensitive detection of DNA hybridization.