Intramolecular Hydrogen Bonding Restricts Gd–Aqua‐Ligand Dynamics

Aqua ligands can undergo rapid internal rotation about the M−O bond. For magnetic resonance contrast agents, this rotation results in diminished relaxivity. Herein, we show that an intramolecular hydrogen bond to the aqua ligand can reduce this internal rotation and increase relaxivity. Molecular modeling was used to design a series of four Gd complexes capable of forming an intramolecular H‐bond to the coordinated water ligand, and these complexes had anomalously high relaxivities compared to similar complexes lacking a H‐bond acceptor. Molecular dynamics simulations supported the formation of a stable intramolecular H‐bond, while alternative hypotheses that could explain the higher relaxivity were systematically ruled out. Intramolecular H‐bonding represents a useful strategy to limit internal water rotational motion and increase relaxivity of Gd complexes.     

Einfluss von H‐Brückenbindungen auf die Jahn–Teller‐Verzerrung in den Kettenstrukturen von 2,2′‐bipyMn(H2PO4)F2·H2O und 2,2′‐bipyMn(H2PO4)2F

In the system 2,2′‐bipyridine/Mn^III/HF/H₃PO₄/H₂O two compounds with chain structures could be prepared and characterised by X‐ray structure analyses. 2,2′‐bipyMn(H₂PO₄)F₂·H₂O ( 1 ): monoclinic, twinned, space group P2₁/c, Z = 4, a = 6.7883(4), b = 10.9147(5), c = 17.8102(8) Å, β = 100.142(4)°, R = 0.0328. 2,2′‐bipyMn(H₂PO₄)₂F ( 2 ): triclinic, space group P , Z = 2, a = 6.675(1), b = 10.715(1), c = 11.013(1) Å, α = 107.595(9)°, β = 90.994(9)°, γ = 95.784(8)°, R = 0.0252. Both compounds show chain structures with trans‐bridging dihydrogenphosphate ligands and bipy and two fluorine ligands for ( 1 ), or bipy, fluorine and an additional dihydrogenphosphate, respectively, for ( 2 ) in equatorial positions. Due to the pseudo‐Jahn–Teller effect, Mn^III shows elongated octahedral coordination with ferrodistortive ordering along the chain direction. The distortion is remarkably higher in ( 1 ) than in ( 2 ). This is discussed in context with additional hydrogen bonds along the chain in ( 2 ).     

Effect of Guest–Host Hydrogen Bonding on the Structures and Properties of Clathrate Hydrates

To provide improved understanding of guest–host interactions in clathrate hydrates, we present some correlations between guest chemical structures and observations on the corresponding hydrate properties. From these correlations it is clear that directional interactions such as hydrogen bonding between guest and host are likely, although these have been ignored to greater or lesser degrees because there has been no direct structural evidence for such interactions. For the first time, single‐crystal X‐ray crystallography has been used to detect guest–host hydrogen bonding in structure II (sII) and structure H (sH) clathrate hydrates. The clathrates studied are the tert‐butylamine (tBA) sII clathrate with H₂S/Xe help gases and the pinacolone + H₂S binary sH clathrate. X‐ray structural analysis shows that the tBA nitrogen atom lies at a distance of 2.64 Å from the closest clathrate hydrate water oxygen atom, whereas the pinacolone oxygen atom is determined to lie at a distance of 2.96 Å from the closest water oxygen atom. These distances are compatible with guest–water hydrogen bonding. Results of molecular dynamics simulations on these systems are consistent with the X‐ray crystallographic observations. The tBA guest shows long‐lived guest–host hydrogen bonding with the nitrogen atom tethered to a water HO group that rotates towards the cage center to face the guest nitrogen atom. Pinacolone forms thermally activated guest–host hydrogen bonds with the lattice water molecules; these have been studied for temperatures in the range of 100–250 K. Guest–host hydrogen bonding leads to the formation of Bjerrum L‐defects in the clathrate water lattice between two adjacent water molecules, and these are implicated in the stabilities of the hydrate lattices, the water dynamics, and the dielectric properties. The reported stable hydrogen‐bonded guest–host structures also tend to blur the longstanding distinction between true clathrates and semiclathrates.     

Synthesis and Crystal Structure of a [Mo8O26]4– Cluster Derivative with 4‐MePyH+. First β‐Octamolybdate Derivative with π–π Stacking

Dioxobis(pyridine‐2‐thiolate‐N, S)molybdenum(VI) (MoO₂(Py‐S)₂), reacts with of 4‐methylpyridine (4‐MePy) in acetonitrile, by slow diffusion, to afford the title compound. This has been characterized by elemental analysis, IR and ¹H NMR spectroscopy. The X‐ray single crystal structure of the complex is described. Structural studies reveal that the molecular structure consists of a β‐Mo₈O₂₆ polyanion with eight MoO₆ distorted edge‐shared octahedra with short terminal Mo–O bonds (1.692–1.714 Å), bonds of intermediate length (1.887–1.999 Å) and long bonds (2.150–2.473 Å). Two different types of hydrogen bonds have been found: N–H···O (2.800–3.075 Å) and C–H···O (3.095–3.316 Å). The presence of π–π stacking interactions and strong hydrogen bonds are presumably responsible for the special disposition of the pyridinic rings around the polyanion cluster.     

Intramolecular Hydrogen Bonding: The Case of β‐Phosphorylated Nitroxide (= Aminoxyl) Radical

Alkoxyamines and persistent nitroxide (= aminoxyl) radicals are important regulators of nitroxide‐mediated radical polymerization. Since polymerization times decrease with the increasing homolysis rate constant of the C? ON bond homolysis between the polymer chain and the aminooxy moiety, the factors influencing the cleavage rate constant are of considerable interest. It has already been shown that the value of the homolysis rate constant k_d is very sensitive to the stabilization of both released radical species. X‐Ray, EPR, and kinetic data showed that the intramolecular H‐bonding radical in the 1‐(diethoxyphosphoryl)‐2,2‐dimethylpropyl 2‐hydroxy‐1,1‐dimethylethyl nitroxide ( 3a ) (homologue of 2‐hydroxy‐1,1‐dimethylethyl 1‐phenyl‐2‐methylpropyl nitroxide ( 2a )) did not occur with the nitroxide moiety as expected but with the phosphoryl group. However, the polymerization rate of styrene (= ethenylbenzene) was significantly enhanced.     

Tetrathiafulvalene‐Based Macrocycles Formed by Radical Cation Dimerization: The Role of Intramolecular Hydrogen Bonding and Solvent

Compounds 1 a and 1 b were prepared by appending two tetrathiafulvalene (TTF) units to an aromatic amide segment that is driven by six or two intramolecular N? H???O hydrogen bonds to adopt a folded conformation. UV/Vis absorption experiments revealed that if the TTF units were oxidized to TTF^.+ radical cations, the two compounds could form a stable single molecular noncovalent macrocycle in less polar dichloromethane or dichloroethane or a bimolecular noncovalent macrocycle in a binary mixture of dichloromethane with a more polar solvent owing to remarkably enhanced dimerization of the TTF^.+ units. The stability of the (TTF^.+)₂ dimer was evaluated through UV/Vis absorption, electron paramagnetic resonance, and cyclic voltammetry experiments and also by comparing the results with those of control compound 2 . The results showed that introduction of the intramolecular hydrogen bonds played a crucial role in promoting the stability of the (TTF^.+)₂ dimer and thus the noncovalent macrocyclization of the two backbones in both uni‐ and bimolecular manners.     

Unusual Metal–Metal Bonding in a Dinuclear Pt–Au Complex: Snapshot of a Transmetalation Process

The dinuclear Pt–Au complex [(CNC)(PPh₃)Pt Au(PPh₃)](ClO₄) ( 2 ) (CNC=2,6‐diphenylpyridinate) was prepared. Its crystal structure shows a rare metal–metal bonding situation, with very short Pt–Au and Au–C_ipso(CNC) distances and dissimilar Pt–C_ipso(CNC) bonds. Multinuclear NMR spectra of 2 show the persistence of the Pt–Au bond in solution and the occurrence of unusual fluxional behavior involving the [Pt^II] and [Au^I] metal fragments. The [Pt^II]??? [Au^I] interaction has been thoroughly studied by means of DFT calculations. The observed bonding situation in 2 can be regarded as a model for an intermediate in a transmetalation process.     

Hydrogen‐Bonding Catalysis of Tetraalkylammonium Salts in an Aza‐Diels–Alder Reaction

A piperidine‐derived tetraalkylammonium salt with a non‐coordinating counteranion worked as an effective hydrogen‐bonding catalyst in an aza‐Diels–Alder reaction of imines and a Danishefsky diene. The hydrogen‐bonding interaction between the ammonium salt and an imine was observed as part of a ¹H NMR titration study.     

Synthesis and Structure of Dicyclohexylammonium Tri‐tert‐pentoxysilanethiolate and 5‐Aminopentylammonium Tri‐tert‐pentoxysilanethiolate

Tri–tert–pentoxysilanethiol, (EtMe₂CO)₃SiSH, reacts with dicyclohexylamine and 1,5–diaminopentane yielding ion‐quadruples connected by hydrogen bonds: [{(C₆H₁₁)₂NH₂}⁺{(EtMe₂CO)₃SiS}^?]₂ ( 1 ) and [{H₂N–C₅H₁₀–NH₃}⁺{(EtMe₂CO)₃SiS}^?]₂ ( 2 ). The compounds were characterized by X–ray diffraction, elemental analysis, IR and NMR. Both compounds form dimers, composed of two thiolate anions and two ammonium cations. The dimers have a central core of eight–membered rings built due to the formation of four charge–assisted N⁺–H···^?S–hydrogen bonds. Additional N⁺–H···N hydrogen bonds are found in the case of 2 , linking the dimers into infinite two–dimensional sheets.     

Active‐Metal Template Synthesis of a Halogen‐Bonding Rotaxane for Anion Recognition

The synthesis of an all‐halogen‐bonding rotaxane for anion recognition is achieved by using active‐metal templation. A flexible bis‐iodotriazole‐containing macrocycle is exploited for the metal‐directed rotaxane synthesis. Endotopic binding of a Cu^I template facilitates an active‐metal CuAAC iodotriazole axle formation reaction that captures the interlocked rotaxane product. Following copper‐template removal, exotopic coordination of a more sterically demanding rhenium(I) complex induces an inversion in the conformation of the macrocycle component, directing the iodotriazole halogen‐bond donors into the rotaxane’s interlocked binding cavity to facilitate anion recognition.     

Ditopic Receptors based on Lower‐ and Upper‐Rim Substituted Hexahomotrioxacalix[3]arenes: Cation‐Controlled Hydrogen Bonding of Anion

Heteroditopic hexahomotrioxacalix[3]arene receptors that are capable of binding an anion and a cation simultaneously in a cooperative fashion were synthesized. The structure of one of the triamide derivatives was confirmed by single‐crystal X‐ray diffraction. The binding of alkali metals at the lower rim, and the binding of anions (chloride, bromide) at the upper rim, has been investigated by using ¹H NMR titration experiments. Alkali metal binding at the lower rim controls the calix cavity. Li⁺‐ion binding to the lower rim can improve the binding ability of anions at the upper rim amide moiety by a factor of 15, thus suggesting a strong positive allosteric effect for anion recognition. However, when a Na⁺ cation is bound to the ionophoric site on the lower rim, the calix cavity is changed from a “flattened cone” to a more‐upright form, which is favored for intramolecular hydrogen bonding between the neighboring NH and C?O groups; this change can block the inclusion of anions onto the amide moiety at the upper rim, which strongly suggests a negative allosteric effect of Na⁺‐ion binding, which controls the cooperative recognition system.     

Hydrogen Bonding Network of 4‐Amidiniumpyridine Acetate and PtIIbis(triphenylphosphine) Complexes with 4‐Amidine­pyridine

The X‐ray structures of 4‐amidiniumpyridine acetate, ( 1· H)AcO, and of cis‐[Pt( 1 )₂(PPh₃)₂](NO₃)₂ ( 2 ), as well as their IR spectra, reveal intramolecular hydrogen bonding, which held together the cations and the anions. The IR spectroscopic data suggest that this may be so also in cis‐[PtCl( 1 )(PPh₃)₂](BF₄) ( 3 ). In ( 1· H)AcO and in 2 extensive intermolecular hydrogen bonding networks span through the whole crystals.     

Key Role of Intramolecular Metal Chelation and Hydrogen Bonding in the Cobalt‐Mediated Radical Polymerization of N‐Vinyl Amides

This work reveals the preponderance of an intramolecular metal chelation phenomenon in a controlled radical polymerization system involving the reversible trapping of the radical chains by a cobalt complex bis(acetylacetonato)cobalt(II). The cobalt‐mediated radical polymerization (CMRP) of a series of N‐vinyl amides was considered with the aim of studying the effect of the cobalt chelation by the amide moiety of the last monomer unit of the chain. The latter reinforces the cobalt? polymer bond in the order N‐vinylpyrrolidone<N‐vinyl caprolactam<N‐methyl‐N‐vinyl acetamide, and is responsible for the optimal control of the polymerizations observed for the last two monomers. Such a double linkage between the controlling agent and the polymer, through a covalent bond and a dative bond, is unique in the field of controlled radical polymerization and represents a powerful opportunity to fine tune the equilibrium between latent and free radicals. Possible hydrogen bond formation is also taken into account in the case of N‐vinyl acetamide and N‐vinyl formamide. These results are essential for understanding the factors influencing Co? C bond strength in general, and the CMRP mechanism in particular, but also for developing a powerful platform for the synthesis of new precision poly(N‐vinyl amide) materials, which are an important class of polymers that sustain numerous applications today.     

A Robust Nanoporous Supramolecular Metal–Organic Framework Based on Ionic Hydrogen Bonds

Hydrogen‐bond assembly of tripod‐like organic cations [H₃‐MeTrip]³⁺ (1,2,3‐tri(4′‐pyridinium‐oxyl)‐2‐methylpropane) and the hexa‐anionic complex [Zr₂(oxalate)₇]^6? leads to a structurally, thermally, and chemically robust porous 3D supramolecular framework showing channels of 1 nm in width. Permanent porosity has been ascertained by analyzing the material at the single‐crystal level during a sorption cycle. The framework crystal structure was found to remain the same for the native compound, its activated phase, and after guest resorption. The channels exhibit affinities for polar organic molecules ranging from simple alcohols to aniline. Halogenated molecules and I₂ are also taken up from hexane solutions by this unique supramolecular framework.     

Crystallographic Evidence for Direct Metal–Metal Bonding in a Stable Open‐Shell La2@Ih‐C80 Derivative

Endohedral metallofullerenes (EMFs) have novel structures and properties that are closely associated with the internal metallic species. Benzyl radical additions have been previously shown to form closed‐shell adducts by attaching an odd number of addends to open‐shell EMFs (such as Sc₃C₂@I_h‐C₈₀) whereas an even number of groups are added to closed‐shell EMFs (for example Sc₃N@I_h‐C₈₀). Herein we report that benzyl radical addition to the closed‐shell La₂@I_h‐C₈₀ forms a stable, open‐shell monoadduct instead of the anticipated closed‐shell bisadduct. Single‐crystal X‐ray diffraction results show the formation of a stable radical species. In this species, the La?La distance is comparable to the theoretical value of a La?La covalent bond and is shorter than reported values for other La₂@I_h‐C₈₀ derivatives, providing unambiguous evidence for the formation of direct La?La bond.     

Multistimuli‐Responsive Luminescence Switching of Pyrazine Derivative Based Donor–Acceptor–Donor Luminophores

Three symmetrical donor–acceptor–donor (D–A–D) luminophores ( C1 , C2 , and C3 ) with pyrazine derivatives as electron‐withdrawing groups have been developed for multistimuli‐responsive luminescence switching. For comparison, reference compounds R1 and R2 without the pyrazine moiety have also been synthesized. Intramolecular charge transfer (ICT) interactions can be found for all D–A–D luminophores owing to the electron‐withdrawing properties of the two imine nitrogen atoms in the pyrazine ring and the electron‐donating properties of the other two amine nitrogen atoms in the two triphenylamine units. Moreover, luminophores C1 , C2 , and C3 exhibit “on–off–on” luminescence switching properties in mixtures of water/tetrahydrofuran with increasing water content, which is different from the “on–off” switching for typical aggregation‐caused quenching (ACQ) materials and “off–on” switching for traditional aggregation‐induced emission (AIE) materials. Additionally, upon grinding the pristine samples, luminophores C1 , C2 , and C3 display bathochromically shifted photoluminescence maxima that can be recovered by either solvent fuming or thermal annealing treatments. The piezofluorochromic (PFC) properties are more pronounced than those for reference compounds R1 and R2 , which indicates that D–A molecules have the ability to amplify the PFC effect by tuning the ICT interactions upon tiny structural changes under pressure. Furthermore, the target luminophores demonstrate acid‐responsive photoluminescence spectra that can be recovered in either basic or ambient environments. These results suggest that D–A complexes are potential candidates for multistimuli‐responsive luminescence switching because their ICT profiles can be facilely tuned with tiny external stimuli.     

pH‐ and Sugar‐Induced Shape Memory Hydrogel Based on Reversible Phenylboronic Acid–Diol Ester Bonds

A simple strategy is provided to construct a novel pH‐ and sugar‐induced shape memory hydrogel based on dynamic phenylboronic acid (PBA)–diol interactions formed by PBA‐modified sodium alginate (Alg‐PBA) and poly(vinyl alcohol) (PVA). The dynamic PBA–diol ester bonds serve as temporary cross‐links and stabilize the deformed shape of the hydrogel. The disassociation of the PBA–diol ester bonds is explored in acidic conditions and aqueous solutions of glucose and fructose, which endow the hydrogel with shape memory performances.

     

Native Mannose‐Dominant Extraction by Pyridine–Phenol Alternating Oligomers Having an Extremely Efficient Repeating Motif of Hydrogen‐Bonding Acceptors and Donors

Pyridine–phenol alternating oligomers in which pyridine and phenol moieties are alternatingly linked through acetylene bonds at the 2,6‐positions of the aromatic rings were designed and synthesized. The pyridine nitrogen atom and the neighboring phenolic hydroxyl group were oriented so that they do not form an intramolecular hydrogen bond but cooperatively act as hydrogen‐bonding acceptor and donor in a push–pull fashion for the hydroxyl group of saccharides. The longer oligomer strongly bound to lipophilic glycosides in 1,2‐dichloroethane, and association constants approached 10⁸ M ^?1. Moreover, the oligomer extracted native saccharides from a solid phase to apolar organic solvents up to the extent of an equal amount of the oligomer and showed mannose‐dominant extraction among naturally abundant hexoses. The oligomer bound to native saccharides even in 20 % DMSO‐containing 1,2‐dichloroethane and exhibited association constants of greater than 10 M ^?1 for D ‐mannose and D ‐glucose.     

Host–Guest Chemistry: Oxoanion Recognition Based on Combined Charge‐Assisted C−H or Halogen‐Bonding Interactions and Anion⋅⋅⋅Anion Interactions Mediated by Hydrogen Bonds

Several bis‐triazolium‐based receptors have been synthesized and their anion‐recognition capabilities have been studied. The central chiral 1,1′‐bi‐2‐naphthol (BINOL) core features either two aryl or ferrocenyl end‐capped side arms with central halogen‐ or hydrogen‐bonding triazolium receptors. NMR spectroscopic data indicate the simultaneous occurrence of several charge‐assisted aliphatic and heteroaromatic C?H noncovalent interactions and combinations of C?H hydrogen and halogen bonding. The receptors are able to selectively interact with HP₂O₇^3?, H₂PO₄^?, and SO₄^2? anions, and the value of the association constant follows the sequence: HP₂O₇^3?>SO₄^2?>H₂PO₄^?. The ferrocenyl end‐capped 7²⁺?2 BF₄ ^? receptor allows recognition and differentiation of H₂PO₄^? and HP₂O₇^3? anions by using different channels: H₂PO₄^? is selectively detected through absorption and emission methods and HP₂O₇^3? by using electrochemical techniques. Significant structural results are the observation of an anion???anion interaction in the solid state (2:2 complex, 6²⁺? [ H₂P₂O₇ ] ^2? ), and a short C?I???O contact is observed in the structure of the complex [ 8 ²⁺][SO₄]_0.5[BF₄].