Gold Nanoparticles Supported on Mesoporous Titania Thin Films with High Loading as a CO Oxidation Catalyst

In the present work, 2.4 nm gold nanoparticles (Au NPs) are uniformly dispersed on mesoporous titania thin films which are structurally tuned by controlling the calcination temperature. The gold content of the catalyst is as high as 27.8 wt %. To our knowledge, such a high loading of Au NPs with good dispersity has not been reported until now. Furthermore, the reaction rate of the gold particles is enhanced by one order of magnitude when supported on mesoporous titania compared to non‐porous titania. This significant improvement can be explained by an increase in the diffusivity of the substrate due to the presence of mesopores, the resistance to agglomeration, and improved oxygen activation.     

Mesoporous Titania Thin Film with Highly Ordered and Fully Accessible Vertical Pores and Crystalline Walls

We report the preparation of mesoporous titania thin films with the R m pore structure derived from the Im m self‐assembled ordering of the titania species and an EO₁₀₆PO₇₀EO₁₀₆ triblock copolymer. The films were spin‐cast and then aged at 18 °C at a relative humidity of 70 %, which led to the orientation of the Im m structure with the [111] direction perpendicular to the substrates. The [111] body‐diagonal channels became vertical channels upon calcination at 400 °C, thus leading to thin films with vertical channels. The pores are ordered over a large area of up to 1 μm². The titania films can be formed on various types of substrates. By using a titania film formed on a Pt‐coated Si wafer as a template, we produced by an electrochemical‐deposition technique arrays of gold nanowires, whose morphology suggests that most of the pores of the titania thin films are accessible. The pore structure of vertical channels is stable up to 600 °C, at which temperature the wall materials crystallize into anatase.     

Preparation of Ordered Mesoporous Alumina‐Doped Titania Films with High Thermal Stability and Their Application to High‐Speed Passive‐Matrix Electrochromic Displays

Ordered mesoporous alumina‐doped titania thin films with anatase crystalline structure were prepared by using triblock copolymer Pluronic P123 as structure‐directing agent. Uniform Al doping was realized by using aluminum isopropoxide as a dopant source which can be hydrolyzed together with titanium tetraisopropoxide. Aluminum doping into the titania framework can prevent rapid crystallization to the anatase phase, thereby drastically increasing thermal stability. With increasing Al content, the crystallization temperatures tend to increase gradually. Even when the Al content doped into the framework was increased to 15 mol %, a well‐ordered mesoporous structure was obtained, and the mesostructural ordering was still maintained after calcination at 550 °C. During the calcination process, large uniaxial shrinkage occurred along the direction perpendicular to the substrate with retention of the horizontal mesoscale periodicity, whereby vertically oriented nanopillars were formed in the film. The resulting vertical porosity was successfully exploited to fabricate a high‐speed and high‐quality passive‐matrix electrochromic display by using a leuco dye. The vertical nanospace in the films can effectively prevent drifting of the leuco dye.     

Synthesis of Transparent Mesoporous and Mesostructured Thin Silica Films

A novel method for obtaining crack-free transparent periodic mesoporous thin films is described. Such films are prepared by a simple sol-gel process using surfactants as templates, with a pre-treatment of the glass substrate. The silicate precursor (tetraethoxysilane) is pre-hydrolyzed under acidic conditions before dissolving directly cetyltrimethylammonium bromide (CTAB). The solution is then spin-coated on pre-treated glass substrate. After the film has been deposited, it is calcined in air. X-ray Diffraction (XRD) has been used to characterize the film before and after thermal treatment. The film consists of a nanocomposite material with a periodic structure. Before calcination the XRD pattern has a sharp peak at d = 3.8 nms which is broadened and shifted by about 3.0 nm after calcination. Infrared transmission spectra have been performed on the films. Analysis of the free OH group stretching vibration indicates the removal of the surfactant after calcination in addition to an enhancement of the specific surface area.     

Synthesis of Mesoporous Lithium Titanate Thin Films and Monoliths as an Anode Material for High‐Rate Lithium‐Ion Batteries

Mesoporous Li₄Ti₅O₁₂ (LTO) thin film is an important anode material for lithium‐ion batteries (LIBs). Mesoporous films could be prepared by self‐assembly processes. A molten‐salt‐assisted self‐assembly (MASA) process is used to prepare mesoporous thin films of LTOs. Clear solutions of CTAB, P123, LiNO₃, HNO₃, and Ti(OC₄H₉)₄ in ethanol form gel‐like meso‐ordered films upon either spin or spray coating. In the assembly process, the CTAB/P123 molar ratio of 14 is required to accommodate enough salt species in the mesophase, in which the Li^I/P123 ratio can be varied between molar ratios of 28 and 72. Calcination of the meso‐ordered films produces transparent mesoporous spinel LTO films that are abbreviated as Cxx‐yyy‐zzz or CAxx‐yyy‐zzz (C=calcined, CA=calcined–annealed, xx=Li^I/P123 molar ratio, and yyy=calcination and zzz=annealing temperatures in Celsius) herein. All samples were characterized by using XRD, TEM, N₂‐sorption, and Raman techniques and it was found that, at all compositions, the LTO spinel phase formed with or without an anatase phase as an impurity. Electrochemical characterization of the films shows excellent performance at different current rates. The CA40‐350‐450 sample performs best among all samples tested, yielding an average discharge capacity of (176±1) mA h g^?1 at C/2 and (139±4) mA h g^?1 at 50 C and keeping 92 % of its initial discharge capacity upon 50 cycles at C/2.     

Structurally Stabilized Organosilane‐Templated Thermostable Mesoporous Titania

Structurally thermostable mesoporous anatase TiO₂ (m‐TiO₂) nanoparticles, uniquely decorated with atomically dispersed SiO₂, is reported for the first time. The inorganic Si portion of the novel organosilane template, used as a mesopores‐directing agent, is found to be incorporated in the pore walls of the titania aggregates, mainly as isolated sites. This is evident by transmission electron microscopy and high‐angle annular dark field scanning transmission electron microscopy, combined with electron dispersive X‐ray spectroscopy. This type of unique structure provides exceptional stability to this new material against thermal collapse of the mesoporous structure, which is reflected in its high surface area (the highest known for anatase titania), even after high‐temperature (550 °C) calcination. Control of crystallite size, pore diameter, and surface area is achieved by varying the molar ratios of the titanium precursor and the template during synthesis. These mesoporous materials retain their porosity and high surface area after template removal and further NaOH/HCl treatment to remove silica. We investigate their performance for dye‐sensitized solar cells (DSSCs) with bilayer TiO₂ electrodes, which are prepared by applying a coating of m‐TiO₂ onto a commercial titania (P25) film. The high surface area of the upper mesoporous layer in the P25–m‐TiO₂ DSSC significantly increases the dye loading ability of the photoanode. The photocurrent and fill factor for the DSSC with the bilayer TiO₂ electrode are greatly improved. The large increase in photocurrent current (ca. 56 %) in the P25–m‐TiO₂ DSSC is believed to play a significant role in achieving a remarkable increase in the photovoltaic efficiency (60 %) of the device, compared to DSSCs with a monolayer of P25 as the electrode.     

Easy and General Synthesis of Large‐Sized Mesoporous Rare‐Earth Oxide Thin Films by ′Micelle Assembly′

Large‐sized (ca. 40 nm) mesoporous Er₂O₃ thin films are synthesized by using a triblock copolymer poly(styrene‐b‐2‐vinyl pyridine‐b‐ethylene oxide) (PS‐b‐P2VP‐b‐PEO) as a pore directing agent. Each block makes different contributions and the molar ratio of PVP/Er³⁺ is crucial to guide the resultant mesoporous structure. An easy and general method is proposed and used to prepare a series of mesoporous rare‐earth oxide (Sm₂O₃, Dy₂O₃, Tb₂O₃, Ho₂O₃, Yb₂O₃, and Lu₂O₃) thin films with potential uses in electronics and optical devices.     

Photovoltaic Behaviour of Titanyl Phthalocyanine Thin Films and Titania Bilayer Films

Summary: Titanyl phthalocyanine (TiOPc) thin films were prepared using evaporation and surface polymerization by ion-assisted deposition (SPIAD) in a vacuum deposition system. These films were characterized by means of ultraviolet and X-ray photoelectron spectroscopy as well as UV/Vis absorption spectroscopy. Valence band and elemental content indicated that phthalocyanine electronic and chemical structures were largely preserved during SPIAD. Further, bilayer thin films of titania (TiO₂) and SPIAD TiOPc were prepared. TiO₂ film was deposited by reactive magnetron sputtering of TiO₂ target. Study of the structured samples was focused on the optical and electrical properties of the composite films. The films were characterized by non-contact photovoltage measurements and UV-Vis spectroscopy. These results suggest there is a possibility to use these bilayer thin films in photovoltaic solar cells, however further experiments to improve conductivity of the films will be required.     

Low‐Temperature Route to Crystalline Titania Network Structures in Thin Films

A low temperature route to crystalline titania nanostructures in thin films is presented. The synthesis is performed by the combination of sol‐gel processes, using a novel precursor for this kind of application, an ethylene glycol‐modified titanate (EGMT), and the structure templating by micro‐phase separation of a di‐block copolymer. Different temperatures around 100 °C are investigated. The nanostructure morphology is examined with scanning electron microscopy, whereas the crystal structure and thin film compositions are examined by scattering methods. Optoelectronic measurements reveal the band‐gap energies and sub‐band states of the titania films. An optimum titania thin film is created at temperatures not higher than 90 °C, regarding sponge‐like morphology with pore sizes of 25–30 nm, porosity of up to 71 % near the sample surface, and crystallinity of titania in the rutile phase. The low temperature during synthesis is of high importance for photovoltaic applications and renders the resulting titania films interesting for future energy solutions.     

Rapid Fabrication of Mesoporous Titania Films with Controlled Macroporosity to Improve Photocatalytic Property

Hierarchically porous titania films were fabricated by dual templating using a triblock copolymer such as Pluronic F127 and polystyrene (PS) beads, affording mesoporous films with controlled macroporosity. The presence of the triblock copolymer in the precursor solutions suppressed a regular accumulation of spherical PS beads, and PS‐derived macropores could be dispersed over the whole mesoporous titania film through rapid fabrication by spin‐coating. Some of the macropores were clustered, but the presence of the large spaces was important for keeping the mesostructure after calcination. Photodegradation of methylene blue (MB) was investigated by using the photoactive anatase films. The photodegradation of MB over the porous anatase films was accelerated by effective diffusion of MB molecules in the PS‐derived macropores, but it was important for improving photocatalytic performance to regulate the balance between the effectiveness of the diffusion in the macropores and the decrease of the surface area from the embedded macropores, as well as the reduction in the transparency of the porous films.     

Growth of Single‐Layered Two‐Dimensional Mesoporous Polymer/Carbon Films by Self‐Assembly of Monomicelles at the Interfaces of Various Substrates

Single‐layered two‐dimensional (2D) ultrathin mesoporous polymer/carbon films are grown by self‐assembly of monomicelles at the interfaces of various substrates, which is a general and common modification strategy. These unconventional 2D mesoporous films possess only a single layer of mesopores, while the size of the thin films can grow up to inch size in the plane. Free‐standing transparent mesoporous carbon ultrathin films, together with the ordered mesoporous structure on the substrates of different compositions (e.g. metal oxides, carbon) and morphologies (e.g. nanocubes, nanodiscs, flexible and patterned substrates) have been obtained. This strategy not only affords controllable hierarchical porous nanostructures, but also appends the easily modified and multifunctional properties of carbon to the primary substrate. By using this method, we have fabricated Fe₂O₃–mesoporous carbon photoelectrochemical biosensors, which show excellent sensitivity and selectivity for glutathione.     

有序介孔氧化硅薄膜制备及其组装化学

本文综述了近年来利用有机模板法合成有序介孔二氧化硅薄膜的研究进展，重点阐述了两相界面外延生长和蒸发诱导自组装两种制备方法及其合成机理。此外，讨论了有序介孔二氧化硅薄膜的组装化学，包括金属元素掺杂，纳米粒子在介孔薄膜中的组装，以及有机物/二氧化硅纳米复合薄膜的制备，并对介孔二氧化硅薄膜未来的发展趋势做了展望。     

Ordered Mesoporous Thin Films of Rutile TiO2 Nanocrystals Mixed with Amorphous Ta2O5

Ordered mesoporous thin films of composites of rutile TiO₂ nanocrystals with amorphous Ta₂O₅ are fabricated by evaporation‐induced self‐assembly followed by subsequent heat treatment beyond 780 °C. Incorporation of selected amounts of Ta₂O₅ (20 mol %) in the mesoporous TiO₂ film, together with the unique mesoporous structure itself, increased the onset of crystallization temperature which is high enough to ensure the crystallization of amorphous titania to rutile. The ordered mesoporous structure benefits from a block‐copolymer template, which stabilizes the mesostructure of the amorphous mixed oxides before crystallization. The surface and in‐depth composition analysis by X‐ray photoelectron spectroscopy suggests a homogeneous intermixing of the two oxides in the thin film. A detailed X‐ray absorption fine structure measurement on the composite film containing 20 mol % Ta₂O₅ and heated to 800 °C confirms the amorphous nature of the Ta₂O₅ phase. Photocatalytic activity evaluation suggests that the rutile nanocrystals in the synthesized ordered mesoporous thin film possess good ability to assist the photodegradation of rhodamine B in water under illumination by UV light.     

Hybrid 3D Ordered Mesoporous Thin Films Made from Organosiloxane Precursors

The synthesis and characterisation of hybrid organic-inorganic mesoporous thin films made from organosiloxane precursors are presented. Three-dimensional mesostructures (P6₃/mmc, Pm3n) have been obtained and their formation is related to dip coating conditions and sol compositions. Calcination at moderate temperatures allows the removal of the templating surfactant without destroying the organic functions covalently bonded to the porous network.     

Mesostructured Dye‐Doped Titanium Dioxide for Micro‐Optoelectronic Applications

Optically transparent, mesostructured titanium dioxide thin films were fabricated using an amphiphilic poly(alkylene oxide) block copolymer template in combination with retarded hydrolysis of a titanium isopropoxide precursor. Prior to calcination, the films displayed a stable hexagonal mesophase and high refractive indices (1.5 to 1.6) relative to mesostructured silica (1.43). After calcination, the hexagonal mesophase was retained with surface areas >300 m² g^?1. The dye Rhodamine 6G (commonly used as a laser dye) was incorporated into the copolymer micelle during the templating process. In this way, novel dye‐doped mesostructured titanium dioxide films were synthesised. The copolymer not only directs the film structure, but also provides a solubilizing environment suitable for sustaining a high monomer‐to‐aggregate ratio at elevated dye concentrations. The dye‐doped films displayed optical thresholdlike behaviour characteristic of amplified spontaneous emission. Soft lithography was successfully applied to micropattern the dye‐doped films. These results pave the way for the fabrication and demonstration of novel microlaser structures and other active optical structures. This new, high‐refractive index, mesostructured, dye‐doped material could also find applications in areas such as optical coatings, displays and integrated photonic devices.     

A General Route to Hollow Mesoporous Rare‐Earth Silicate Nanospheres as a Catalyst Support

Hollow mesoporous structures have recently aroused intense research interest owing to their unique structural features. Herein, an effective and precisely controlled synthesis of hollow rare‐earth silicate spheres with mesoporous shells is reported for the first time, produced by a simple hydrothermal method, using silica spheres as the silica precursors. The as‐prepared hollow rare‐earth silicate spheres have large specific surface area, high pore volume, and controllable structure parameters. The results demonstrate that the selection of the chelating reagent plays critical roles in forming the hollow mesoporous structures. In addition, a simple and low‐energy‐consuming approach to synthesize highly stable and dispersive gold nanoparticle–yttrium silicate (AuNPs/YSiO) hollow nanocomposites has also been developed. The reduction of 4‐nitrophenol with AuNPs/YSiO hollow nanocomposites as the catalyst has clearly demonstrated that the hollow rare‐earth silicate spheres are good carriers for Au nanoparticles. This strategy can be extended as a general approach to prepare multifunctional yolk–shell structures with diverse compositions and morphologies simply by replacing silica spheres with silica‐coated nanocomposites.