Preparation of Partially Acetylated Carotenoids

Partially acetylated carotenoids were prepared from fully acetylated carotenoids by reaction with NaBH₄, and were characterized by UV/VIS, CD, ¹H‐NMR and mass spectra. The 3,6′‐diacetate, 3′,6′‐diacetate, and 6′‐acetate 10 – 12 , respectively, of (6′R)‐capsanthol (=(3R,3′S,5′R,6′R)‐β,κ‐carotene‐3,3′,6′‐triol; 4 ) were obtained from (6′R)‐capsanthol‐3,3′,6′‐triacetate ( 9 ), and the 3‐ and 3′‐acetates 13 and 14 , respectively, of 4 from (6′R)‐capsanthol 3,3′‐diacetate ( 8 ). The utility of this method was also demonstrated by the preparation of zeaxanthin and lutein monoacetates 16, 19 , and 20 .     

Synthesis of spiro[indoline‐3,3′‐pyrrolizines] by 1,3‐dipolar reactions between isatins,l‐proline and electron‐deficient alkenes

Two spiro[indoline‐3,3′‐pyrrolizine] derivatives have been synthesized in good yield with high regio‐ and stereospecificity using one‐pot reactions between readily available starting materials, namely l ‐proline, substituted 1H‐indole‐2,3‐diones and electron‐deficient alkenes. The products have been fully characterized by elemental analysis, IR and NMR spectroscopy, mass spectrometry and crystal structure analysis. In (1′RS ,2′RS ,3SR ,7a′SR )‐2′‐benzoyl‐1‐hexyl‐2‐oxo‐1′,2′,5′,6′,7′,7a′‐hexahydrospiro[indoline‐3,3′‐pyrrolizine]‐1′‐carboxylic acid, C₂₈H₃₂N₂O₄, (I), the unsubstituted pyrrole ring and the reduced spiro‐fused pyrrole ring adopt half‐chair and envelope conformations, respectively, while in (1′RS ,2′RS ,3SR ,7a′SR )‐1′,2′‐bis(4‐chlorobenzoyl)‐5,7‐dichloro‐2‐oxo‐1′,2′,5′,6′,7′,7a′‐hexahydrospiro[indoline‐3,3′‐pyrrolizine], which crystallizes as a partial dichloromethane solvate, C₂₈H₂₀Cl₄N₂O₃·0.981CH₂Cl₂, (II), where the solvent component is disordered over three sets of atomic sites, these two rings adopt envelope and half‐chair conformations, respectively. Molecules of (I) are linked by an O—H…·O hydrogen bond to form cyclic R ₆⁶(48) hexamers of (S ₆) symmetry, which are further linked by two C—H…O hydrogen bonds to form a three‐dimensional framework structure. In compound (II), inversion‐related pairs of N—H…O hydrogen bonds link the spiro[indoline‐3,3′‐pyrrolizine] molecules into simple R ₂²(8) dimers.     

Methylene‐Bridged Metallocenes with 2,2′‐Methylenebis[1H‐inden‐1‐yl] Ligands: Synthesis,Characterization, and Polymerization Catalysis of a Synthetically Simple Class of C2‐ and C2v‐Symmetric ansa‐Metallocenes

The acid‐catalyzed reaction between formaldehyde and 1H‐indene, 3‐alkyl‐ and 3‐aryl‐1H‐indenes, and six‐membered‐ring substituted 1H‐indenes, with the 1H‐indene/CH₂O ratio of 2 : 1, at temperatures above 60° in hydrocarbon solvents, yields 2,2′‐methylenebis[1H‐indenes] 1 – 8 in 50–100% yield. These 2,2′‐methylenebis[1H‐indenes] are easily deprotonated by 2 equiv. of BuLi or MeLi to yield the corresponding dilithium salts, which are efficiently converted into ansa‐metallocenes of Zr and Hf. The unsubstituted dichloro{(1,1′,2,2′,3,3′,3a,3′a,7a,7′a‐η)‐2,2′‐methylenebis[1H‐inden‐1‐yl]}zirconium ([ZrCl₂( 1′ )]) is the least soluble in organic solvents. Substitution of the 1H‐indenyl moieties by hydrocarbyl substituents increases the hydrocarbon solubility of the complexes, and the presence of a substituent larger than a Me group at the 1,1′ positions of the ligand imparts a high diastereoselectivity to the metallation step, since only the racemic isomers are obtained. Methylene‐bridged ‘ansa‐zirconocenes’ show a noticeable open arrangement of the bis[1H‐inden‐1‐yl] moiety, as measured by the angle between the planes defined by the two π‐ligands (the ‘bite angle’). In particular, of the ‘zirconocenes’ structurally characterized so far, the dichloro{(1,1′,2,2′,3,3′,3a,3′a,7a,7′a‐η)‐2,2′‐methylenebis[4,7‐dimethyl‐1H‐inden‐1‐yl]}zirconium ([ZrCl₂( 5′ )] is the most open. The mixture [ZrCl₂( 1′ )]/methylalumoxane (MAO) is inactive in the polymerization of both ethylene and propylene, while the metallocenes with substituted indenyl ligands polymerize propylene to atactic polypropylene of a molecular mass that depends on the size of the alkyl or aryl groups at the 1,1′ positions of the ligand. Ethene is polymerized by rac‐dichloro{(1,1′,2,2′,3,3′,3a,3′a,7a,7′a‐η)‐2,2′‐methylenebis[1‐methyl‐1H‐inden‐1‐yl]}zirconium ([ZrCl₂( 2′ )])/MAO to polyethylene waxes (average degree of polymerization ca. 100), which are terminated almost exclusively by ethenyl end groups. Polyethylene with a high molecular mass could be obtained by increasing the size of the 1‐alkyl substituent.     

Regio‐ and stereospecific assembly of dispiro[indoline‐3,3′‐pyrrolizine‐1′,5′′‐thiazolidines] from simple precursors using a one‐pot procedure: synthesis,spectroscopic and structural characterization,and a proposed mechanism of formation

The synthesis and characterization of three new dispiro[indoline‐3,3′‐pyrrolizine‐1′,5′′‐thiazolidine] compounds are reported, together with the crystal structures of two of them. (3RS,1′SR,2′SR,7a′SR)‐2′‐(4‐Chlorophenyl)‐1‐hexyl‐2′′‐sulfanylidene‐5′,6′,7′,7a′‐tetrahydro‐2′H‐dispiro[indoline‐3,3′‐pyrrolizine‐1′,5′′‐thiazolidine]‐2,4′′‐dione, C₂₈H₃₀ClN₃O₂S₂, (I), (3RS,1′SR,2′SR,7a′SR)‐2′‐(4‐chlorophenyl)‐1‐benzyl‐5‐methyl‐2′′‐sulfanylidene‐5′,6′,7′,7a′‐tetrahydro‐2′H‐dispiro[indoline‐3,3′‐pyrrolizine‐1′,5′′‐thiazolidine]‐2,4′′‐dione, C₃₀H₂₆ClN₃O₂S₂, (II), and (3RS,1′SR,2′SR,7a′SR)‐2′‐(4‐chlorophenyl)‐5‐fluoro‐2′′‐sulfanylidene‐5′,6′,7′,7a′‐tetrahydro‐2′H‐dispiro[indoline‐3,3′‐pyrrolizine‐1′,5′′‐thiazolidine]‐2,4′′‐dione, C₂₂H₁₇ClFN₃O₂S₂, (III), were each isolated as a single regioisomer using a one‐pot reaction involving l ‐proline, a substituted isatin and (Z)‐5‐(4‐chlorobenzylidene)‐2‐sulfanylidenethiazolidin‐4‐one [5‐(4‐chlorobenzylidene)rhodanine]. The compositions of (I)–(III) were established by elemental analysis, complemented by high‐resolution mass spectrometry in the case of (I); their constitutions, including the definition of the regiochemistry, were established using NMR spectroscopy, and the relative configurations at the four stereogenic centres were established using single‐crystal X‐ray structure analysis. A possible reaction mechanism for the formation of (I)–(III) is proposed, based on the detailed stereochemistry. The molecules of (I) are linked into simple chains by a single N—H…N hydrogen bond, those of (II) are linked into a chain of rings by a combination of N—H…O and C—H…S=C hydrogen bonds, and those of (III) are linked into sheets by a combination of N—H…N and N—H…S=C hydrogen bonds.     

Intrinsically microporous polyimides containing spirobisindane and phenazine units: Synthesis,characterization and gas permeation properties

A new diamine containing spirobisindane and phenazine units, namely, 3,3,3′,3′‐tetramethyl‐2,2′,3,3′‐tetrahydro‐1,1′‐spirobi[cyclopenta[b]phenazine]‐7,7′‐diamine (TTSBIDA) was synthesized starting from commercially available 5,5′,6,6′‐tetrahydroxy‐3,3,3′,3′‐tetramethyl‐1,1′‐spirobisindane (TTSBI). TTSBI was oxidized to 3,3,3′,3′‐tetramethyl‐2,2′,3,3′‐tetrahydro‐1,1′‐spirobi[indene]‐5,5′,6,6′‐tetraone (TTSBIQ) which was subsequently condensed with 4‐nitro‐1,2‐phenylenediamine to obtain 3,3,3′,3′‐tetramethyl‐7,7′‐dinitro‐2,2′,3,3′‐tetrahydro‐1,1′‐spirobi[cyclopenta[b]phenazine] (TTSBIDN). TTSBIDN was converted into TTSBIDA by reduction of the nitro groups using hydrazine hydrate in the presence of Pd/C as the catalyst. A series of new polyimides of intrinsic microporosity (PIM‐PIs) were synthesized by polycondensation of TTSBIDA with commercially available aromatic dianhydrides. PIM‐PIs exhibited amorphous nature, high thermal stability (T₁₀ > 480 °C) and intrinsic microporosity (BET surface area = 59–289 m²/g). The gas permeation characteristics of films of selected PIM‐PIs were evaluated and they exhibited appreciable gas permeability as well as high selectivity. The CO₂ and O₂ permeability of PIM‐PIs were in the range 185.4–39.2 and 30.6–6.2 Barrer, respectively. Notably, polyimide derived from TTSBIDA and 4,4′‐(hexafluoroisopropylidene)diphthalic anhydride (PIM‐PI‐6FDA) exhibited high CO₂ and O₂ permeability of 185.4 and 30.6 Barrer with CO₂/CH₄ and O₂/N₂ selectivity of 43.1 and 5.1, respectively. The data of PIM‐PI‐6FDA for CO₂/CH₄ and O₂/N₂ gas pairs were located near Robeson upper bound. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 766–775     

Synthesis and Asymmetric Enantioselective Addition of Chiral Polybinaphthyl and Polybinaphthol I.igands

Four chiral polymers P-1, P-2, P-3 and P-4 were synthesized by the polymerization of （S）-2,2＇-dioctoxy-1,1＇- binaphthyl-6,6＇-boronic acid （S-M-3） with （S）-6,6＇-dibromo-1,1＇-binaphthol （S-M-1）, （R）-6,6＇-dibromo-1,1＇- binaphthol （R-M-1）, （S）-3,3＇-diiodo-1,1＇-binaphthol （S-M-2） and （R）-3,3＇-diiodo-1,1＇-binaphthol （R-M-2） under Pd-catalyzed Suzuki reaction, respectively. All four polymers can show good solubility in some common solvents due to the nonplanarity of the polymers in the main chain backbone and flexible alkyl groups in the side chain. The analysis results indicate that specific rotation and circular dichroism （CD） spectral signals of the alternative S-S chiral polymers P-1 and P-3 are larger than those of S-R chiral polymers P-2 and P-4, but their UV-Vis and fluorescence spectra are almost similar. The results of asymmetric enantioselectivity of four polymers for diethylzinc addition to benzaldehyde indicate that catalytically active center is （R） or （S）-1, 1＇-binaphthol moieties.     

Preparation and (E/Z)‐Isomerization of the Diastereoisomers of Violaxanthin

Violaxanthin A (=(all‐E,3S,5S,6R,3′S,5′S,6′R)‐5,6 : 5′,6′‐diepoxy‐5,6,5′,6′‐tetrahydro‐β,β‐carotene‐3,3′‐diol =syn,syn‐violaxanthin; 5 ) and violaxanthin B (=(all‐E,3S,5S,6R,3′S,5′R,6′S)‐5,6 : 5′,6′‐diepoxy‐5,6,5′,6′‐tetrahydro‐β,β‐carotene‐3,3′‐diol=syn,anti‐violaxanthin; 6 ) were prepared by epoxidation of zeaxanthin diacetate ( 1 ) with monoperphthalic acid. Violaxanthins 5 and 6 were submitted to thermal isomerization and I₂‐catalyzed photoisomerization. The structure of the main products, i.e., (9Z)‐ 5 , (13Z)‐ 5 , (9Z)‐ 6 , (9′Z)‐ 6 , (13Z)‐ 6 , and (13′Z)‐ 6 , was determined by their UV/VIS, CD, ¹H‐NMR, ¹³C‐NMR, and mass spectra.     

Organosoluble polyimides and copolyimides based on 1,1‐bis[4‐(4‐aminophenoxy)phenyl]‐1‐phenylethane and aromatic dianhydrides

1,1‐Bis[4‐(4‐aminophenoxy)phenyl]‐1‐phenylethane (BAPPE) was prepared through nucleophilic substitution reaction of 1,1‐bis(4‐hydroxyphenyl)‐1‐phenylethane and p‐chloronitrobenzene in the presence of K₂CO₃ in N,N‐dimethylformamide, followed by catalytic reduction with hydrazine and Pd/C. Novel organosoluble polyimides and copolyimides were synthesized from BAPPE and six kinds of commercial dianhydrides, including pyromellitic dianhydride (PMDA, I_a ), 3,3′,4,4′‐benzophenonetetracarboxylic dianhydride (BTDA, I_b ), 3,3′,4,4′‐ biphenyltetracarboxylic dianhydride (BPDA, I_c ), 4,4′‐oxydiphthalic anhydride (ODPA, I_d ), 3,3′,4,4′‐diphenylsulfonetetracarboxylic dianhydride (DSDA, I_e ) and 4,4′‐hexafluoroisopropylidenediphthalic anhydride (6FDA, I_f ). Differing with the conventional polyimide process by thermal cyclodehydration of poly(amic acid), when polyimides were prepared by chemical cyclodehydration with N‐methyl‐2‐pyrrolidone as used solvent, resulted polymers showed good solubility. Additional, I_a,b were mixed respectively with the rest of dianhydrides (I_c–f) and BAPPE at certain molar ratios to prepare copolyimides with arbitrary solubilities. These polyimides and copolyimides were characterized by good mechanical properties together with good thermal stability. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2082–2090, 2000     

Synthesis of Some Novel Amino Phenols with Octahydro‐1,1′‐binaphthyl Backbone

A series of new octahydro‐1,1′‐binaphthyl derivatives, namely (R)‐(+)‐2‐(N, N‐dialkylamino)‐2′‐hydroxy‐5,5′,6,6′,7, 7′,8,8′‐octahydro‐1,1′‐binaphthyls (7,9), have been synthesized. Their asymmetric induction for enantioselective addition of Et₂Zn to benzaldehyde was examined and it was found that (R)‐(+)‐2‐(N‐cyclohexyl‐N‐methylamino)‐2′‐hydroxy‐5, 5′,6,6′,7,7′,8,8′‐octahydro‐1,1′‐binaphthyl (9c) exhibited the best asymmetric induction among the ligands prepared, up to 55% ee of 1‐phenylpropanol being obtained.     

Estimation of Critical Temperature of Thermal Explosion for Nitrosubstituted Azetidines Using Non-isothermal DSC

Based on reasonable hypothesis, two general expressions and their six derived formulae for estimating the critical temperature (T_b) of thermal explosion for energetic materials (EM) were derived from the Semenov's thermal explosion theory and eight non‐isothermal kinetic equations. We can easily obtain the values of the initial temperature (T_0i) at which DSC curve deviates from the baseline of the non‐isothermal DSC curve of EM, the onset temperature (T_ei), the exothermic decomposition reaction kinetic parameters and the values of T₀₀ and T_e0 from the equation T_{0i or ei}=T_{00 or e0}+a₁β_i+a₂β_i²+···+a_L?2β_i^L?2, i=1, 2, ;···, L and then calculate the values of T_b by the six derived formulae. The T_b values for seven nitrosubstituted azetidines, 3,3‐dinitroazetidinium nitrate ( 1 ), 3,3‐dinitroazetidinium picrate ( 2 ), 3,3‐dinitroazetidinium‐3‐nitro‐1,2,4‐triazol‐5‐onate ( 3 ), 1,3‐bis(3′,3′‐dinitroazetidine group)‐2,2‐dinitropropane ( 4 ), 1‐(2′,2′,2′‐trinitroethyl)‐3,3‐dinitroazetidine ( 5 ), 3,3‐dinitroazetidinium perchlorate ( 6 ) and 1‐(3′,3′‐dinitroazetidineyl)‐2,2‐dinitropropane ( 7 ), obtained with the six derived formulae are agreeable to each other, whose differences are within 1.5%. The results indicate that the heat‐resistance stability of the seven nitrosubstituted azetidines decreases in the order 6 > 7 > 5 > 4 > 3 > 2 > 1 .     

Four New Lignan Glycosides from Osmanthus fragrans Lour. var. aurantiacus Makino

Four new tetrahydrofuranoid lignan glycosides, (7S,8R,7′R,8′S)‐4,9,4′,7′‐tetrahydroxy‐3,3′‐dimethoxy‐7,9′‐epoxylignan 9‐O‐β‐D ‐glucopyranoside ( 2 ), (7R,8S,7′S,8′R)‐4,9,4′,7′‐tetrahydroxy‐3,3′‐dimethoxy‐7,9′‐epoxylignan 9‐O‐β‐D ‐glucopyranoside ( 3 ), (7R,8S,7′R,8′S)‐4,9,4′,9′‐tetrahydroxy‐3,3′‐dimethoxy‐7,7′‐epoxylignan 9‐O‐β‐D ‐glucopyranoside ( 4 ), and rel‐(7R,8S,7′S,8′R)‐4,9,4′,9′‐tetrahydroxy‐3,3′‐dimethoxy‐7,7′‐epoxylignan 9‐O‐β‐D ‐glucopyranoside ( 5 ), and ten known lignan glycosides, 1 and 6 – 14 , were isolated from the leaves of Osmanthus fragrans Lour. var. aurantiacus Makino . Their structures were established on the basis of spectral and chemical studies.     

(E/Z)‐Isomerization of 3′‐Epilutein

3′‐Epilutein (=(all‐E,3R,3′S,6′R)‐4′,5′‐didehydro‐5′,6′‐dihydro‐β,β‐carotene‐3,3′‐diol; 1 ), isolated from the flowers of Caltha palustris, was submitted to both thermal isomerization and I₂‐catalyzed photoisomerization. The structures of the main products (9Z)‐ 1 , (9′Z)‐ 1 , (13Z)‐ 1 , (13′Z)‐ 1 , (15Z)‐ 1 , and (9Z,9′Z)‐ 1 were determined based on UV/VIS, CD, ¹H‐NMR, and MS data.     

A pimpinellin monomer and dimer isolated from the roots of Esenbeckia grandiflora

X‐ray diffraction studies carried out on single crystals of the monomeric, viz. 5,6‐di­methoxy‐2H‐furo­[2,3‐h][1]benzo­pyran‐2‐one, C₁₃H₁₀O₅, and dimeric, viz. 5,5′,6,6′‐tetra­methoxy‐3,3′,4,4′‐tetra­hydro‐2H,2′H‐3,3′:4,4′‐bi­(furo­[2,3‐h][1]benzo­pyran)‐2,2′‐dione, C₂₆H₂₀O₁₀, forms of pimpinellin have revealed that, following cyclo­dimerization, the carbonyl groups are head‐to‐head with respect to one another. In the monomer, the heterocyclic ring is planar, but it exhibits a twisted‐boat conformation in the dimer. Both the monomer and the dimer interact through C—H⋯O interactions.     

Functionalized 3,3′,5,5′‐Tetraaryl‐1,1′‐Biphenyls: Novel Platforms for Molecular Receptors

This paper describes the development of novel aromatic platforms for supramolecular construction. By the Suzuki cross‐coupling protocol, a variety of functionalized m‐terphenyl derivatives were prepared (Schemes 1–4). Macrolactamization of bis(ammonium salt) (S,S)‐ 6 with bis(acyl halide) 7 afforded the macrocyclic receptor (S,S)‐ 2 (Scheme 1), which was shown by ¹H‐NMR titration studies to form ‘nesting' complexes of moderate stability (K_a between 130 and 290 M ^?1, 300 K) with octyl glucosides 13 – 15 (Fig. 2) in the noncompetitive solvent CDCl₃. Suzuki cross‐coupling starting from 3,3′,5,5′‐tetrabromo‐1,1′‐biphenyl provided access to a novel series of extended aromatic platforms (Scheme 5) for cleft‐type (Fig. 1) and macrotricyclic receptors such as (S,S,S,S)‐ 1 . Although mass‐spectral evidence for the formation of (S,S,S,S)‐ 1 by macrolactamization between the two functionalized 3,3′,5,5′‐tetraaryl‐1,1′‐biphenyl derivatives (S,S)‐ 33 and 36 was obtained, the ¹H‐ and ¹³C‐NMR spectra of purified material remained rather inconclusive with respect to both purity and constitution. The versatile access to the novel, differentially functionalized 3,3′,5,5′‐tetrabromo‐1,1′‐biphenyl platforms should ensure their wide use in future supramolecular construction.     

One‐dimensional CuII coordination polymers containing C2h‐symmetric 1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylate linkers

Two new one‐dimensional Cu^II coordination polymers (CPs) containing the C_2h‐symmetric terphenyl‐based dicarboxylate linker 1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylate (3,3′‐TPDC), namely catena‐poly[[bis(dimethylamine‐κN)copper(II)]‐μ‐1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylato‐κ⁴O,O′:O′′:O′′′] monohydrate], {[Cu(C₂₀H₁₂O₄)(C₂H₇N)₂]·H₂O}_n, (I), and catena‐poly[[aquabis(dimethylamine‐κN)copper(II)]‐μ‐1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylato‐κ²O³:O^3′] monohydrate], {[Cu(C₂₀H₁₂O₄)(C₂H₇N)₂(H₂O)]·H₂O}_n, (II), were both obtained from two different methods of preparation: one reaction was performed in the presence of 1,4‐diazabicyclo[2.2.2]octane (DABCO) as a potential pillar ligand and the other was carried out in the absence of the DABCO pillar. Both reactions afforded crystals of different colours, i.e. violet plates for (I) and blue needles for (II), both of which were analysed by X‐ray crystallography. The 3,3′‐TPDC bridging ligands coordinate the Cu^II ions in asymmetric chelating modes in (I) and in monodenate binding modes in (II), forming one‐dimensional chains in each case. Both coordination polymers contain two coordinated dimethylamine ligands in mutually trans positions, and there is an additional aqua ligand in (II). The solvent water molecules are involved in hydrogen bonds between the one‐dimensional coordination polymer chains, forming a two‐dimensional network in (I) and a three‐dimensional network in (II).     

Synthesis and micropatterning properties of a novel base‐soluble,positive‐working,photosensitive polyimide having an o‐nitrobenzyl ether group

A novel positive‐working, photosensitive polyimide, poly[1,4‐phenyleneoxy‐1,4‐phenylene‐2,2′‐di(2‐nitrobenzyloxy)benzophenone‐3,3′,4,4′‐tetracarboxdiimide] (OPI‐Nb), developable with an aqueous base was prepared by the o‐nitrobenzylation of a polyimide, poly(1,4‐phenyleneoxy‐1,4‐phenylene‐2,2′‐dihydroxybenzophenone‐3,3′,4,4′‐tetracarboxdiimide) (OPI), derived from 2,2′‐dihydroxy‐3,3′,4,4′‐benzophenonetetracarboxylic dianhydride (DHBA) and 4,4′‐oxydianiline, and it micropatterning properties were investigated. The o‐nitrobenzylation of OPI to OPI‐Nb was conducted with o‐nitrobenzyl bromide in N‐methyl‐2‐pyrrolidinone containing Et₃N. The DHBA monomer was synthesized by exhaustive KMnO₄ oxidation of bis(2‐dimethoxy‐3,4‐dimethylphenyl)methane obtained by etherification of bis(2‐hydroxy‐3,4‐dimethylphenyl)methane with iodomethane, followed by deprotection of the methoxy groups and cyclodehydration of the obtained 2,2′‐dihydroxy‐3,3′4,4′‐benzophenonetetracarboxylic acid. The intermediate bis(2‐hydroxy‐3,4‐dimethylphenyl)methane was prepared by the condensation of 2,3‐dimethylphenol with paraformaldehyde. The degree of o‐nitrobenzylation was determined to be over 94 mol % from ¹H NMR absorption of benzylic CH₂ protons. The aromatic OPI was perfectly soluble in a dilute aqueous NaOH solution and tetramethylammonium hydroxide (TMAH), whereas OPI‐Nb was not even swellable in them. In the micropatterning process, OPI‐Nb showed a line‐width resolution of 0.4‐μm and a sensitivity of 5.4 J/cm² when its thin films were irradiated with 365‐nm light and developed with a 2.38% aqueous TMAH solution at room temperature for 90 s. The thickness loss of OPI‐Nb films measured after postbaking at 350 °C was in the 8–9% range. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 776–788, 2007     

New organic–inorganic frameworks incorporating iso‐ and heteropolymolybdate units and a 3,3′,5,5′‐tetramethyl‐4,4′‐bi‐1H‐pyrazole‐2,2′‐diium multiple hydrogen‐bond donor

Poly[bis(3,3′,5,5′‐tetramethyl‐4,4′‐bi‐1H‐pyrazole‐2,2′‐diium) γ‐octamolybdate(VI) dihydrate], {(C₁₀H₁₆N₄)₂[Mo₈O₂₆]·2H₂O}_n, (I), and bis(3,3′,5,5′‐tetramethyl‐4,4′‐bi‐1H‐pyrazole‐2,2′‐diium) α‐dodecamolybdo(VI)silicate tetrahydrate, (C₁₀H₁₆N₄)₂[SiMo₁₂O₄₀]·4H₂O, (II), display intense hydrogen bonding between the cationic pyrazolium species and the metal oxide anions. In (I), the asymmetric unit contains half a centrosymmetric γ‐type [Mo₈O₂₆]⁴⁻ anion, which produces a one‐dimensional polymeric chain by corner‐sharing, one cation and one water molecule. Three‐centre bonding with 3,3′,5,5′‐tetramethyl‐4,4′‐bi‐1H‐pyrazole‐2,2′‐diium, denoted [H₂Me₄bpz]²⁺ [N...O = 2.770 (4)–3.146 (4) Å], generates two‐dimensional layers that are further linked by hydrogen bonds involving water molecules [O...O = 2.902 (4) and 3.010 (4) Å]. In (II), each of the four independent [H₂Me₄bpz]²⁺ cations lies across a twofold axis. They link layers of [SiMo₁₂O₄₀]⁴⁻ anions into a three‐dimensional framework, and the preferred sites for pyrazolium/anion hydrogen bonding are the terminal oxide atoms [N...O = 2.866 (6)–2.999 (6) Å], while anion/aqua interactions occur preferentially viaμ₂‐O sites [O...O = 2.910 (6)–3.151 (6) Å].     

Novel Non‐Coplanar and Tertbutyl‐Substituted Polyimides: Solubility,Optical, Thermal and Dielectric Properties

A novel aromatic diamine monomer bearing tertbutyl and 4‐tertbutylphenyl groups, 3,3′‐ditertbutyl‐4,4′‐diaminodiphenyl‐4′′‐tertbutylphenylmethane (TADBP), was prepared and characterized. A series of non‐coplanar polyimides (PIs) were synthesized via a conventional one‐step polycondensation from TADBP and various aromatic dianhydrides including pyromellitic dianhydride (PMDA), 3,3′,4,4′‐biphenyltetracarboxylic dianhydride (BPDA), 4,4′‐oxydiphthalic anhydride (OPDA), 3,3′,4,4′‐benzophenone tetracarboxylic dianhydride (BTDA) and 4,4′‐(hexafluoroisopropylidene)dipthalic anhydride (6FDA). All PIs exhibit excellent solubility in common organic solvents such as N,N‐dimethylformamide (DMF), N,N‐dimethylacetamide (DMAc), N‐methyl‐2‐pyrrolidone (NMP), dimethyl sulfoxide (DMSO), chloroform (CHCl₃), tetrahydrofuran (THF), and so on. Furthermore, the obtained transparent, strong and flexible polyimide films present good thermal stability and outstanding optical properties. Their glass transition temperatures (T_gs) are in the range of 298 to 347°C, and 10% weight loss temperatures are in excess of 490°C with more than 53% char yield at 800°C in nitrogen. All the polyimides can be cast into transparent and flexible films with tensile strength of 80.5–101 MPa, elongation at break of 8.4%–10.5%, and Young's modulus of 2.3–2.8 GPa. Meanwhile, the PIs show the cutoff wavelengths of 302–356 nm, as well as low moisture absorption (0.30% –0.55%) and low dielectric constant (2.78–3.12 at 1 MHz).     

Porous Coordination Polymers of Diverse Topologies Based on a Twisted Tetrapyridylbiaryl: Application as Nucleophilic Catalysts for Acetylation of Phenols

Porous coordination polymers (CPs) with partially uncoordinated pyridyl rings based on rationally designed polypyridyl linkers are appealing from the point of view of their application as nucleophilic catalysts. A D_2d‐symmetric tetradentate organic linker L , that is, 2,2′,6,6′‐tetramethoxy‐3,3′,5,5′‐tetrakis(4‐pyridyl)biphenyl, was designed and synthesized for metal‐assisted self‐assembly aimed at porous CPs. Depending on the nature of the metal ion and the counter anion, the ligand L is found to function as a 3‐ or 4‐connecting building block leading to porous CPs of diverse topologies. The reaction of L with Zn(NO₃)₂ and Cd(NO₃)₂ yields porous 2 D CPs of “ fes ” topology, in which the tetrapyridyl linker L serves as a 3‐connecting unit with its free pyridyl rings well exposed into the pores. The functional utility of these porous CPs containing uncoordinated pyridyl rings is demonstrated by employing them as efficient heterogeneous nucleophilic catalysts for acetylation of a number of phenols with varying electronic properties and reactivities.     

Acid‐, Water‐ and High‐Temperature‐Stable Ruthenium Complexes for the Total Catalytic Deoxygenation of Glycerol to Propane

The ruthenium aqua complexes [Ru(H₂O)₂(bipy)₂](OTf)₂, [cis‐Ru(6,6′‐Cl₂‐bipy)₂(OH₂)₂](OTf)₂, [Ru(H₂O)₂(phen)₂](OTf)₂, [Ru(H₂O)₃(2,2′:6′,2′′‐terpy)](OTf)₂ and [Ru(H₂O)₃(Phterpy)](OTf)₂ (bipy=2,2′‐bipyridine; OTf^?=triflate; phen=phenanthroline; terpy= terpyridine; Phterpy=4′‐phenyl‐2,2′:6′,2′′‐terpyridine) are water‐ and acid‐stable catalysts for the hydrogenation of aldehydes and ketones in sulfolane solution. In the presence of HOS(O)₂CF₃ (triflic acid) as a dehydration co‐catalyst they directly convert 1,2‐hexanediol to n‐hexanol and hexane. The terpyridine complexes are stable and active as catalysts at temperatures ≥250 °C and in either aqueous sulfolane solution or pure water convert glycerol into n‐propanol and ultimately propane as the final reaction product in up to quantitative yield. For the terpy complexes the active catalyst is postulated to be a carbonyl species [(4′‐R‐2,2′:6′,2′′‐terpy)Ru(CO)(H₂O)₂](OTf)₂ (R=H, Ph) formed by the decarbonylation of aldehydes (hexanal for 1,2‐hexanediol and 3‐hydroxypropanal for glycerol) generated in the reaction mixture through acid‐catalyzed dehydration. The structure of the dimeric complex [{(4′‐phenyl‐2,2′:6′,2′′‐terpy)Ru(CO)}₂(μ‐OCH₃)₂](OTf)₂ has been determined by single crystal X‐ray crystallography (Space group P (a=8.2532(17); b=12.858(3); c=14.363(3) Å; α=64.38(3); β=77.26(3); γ = 87.12(3)°, R=4.36 %).