A novel stereoselective synthesis of (Z)‐α‐arylsulfanyl‐α,β‐unsaturated ketones via Stille coupling of (E)‐α‐arylsulfanylvinylstannanes with acyl halides

(E)‐α‐Arylsulfanylvinylstannanes react with acyl halides in the presence of a catalytic amount of Pd(PPh₃)₄ and CuI cocatalyst to give stereoselectively the corresponding (Z)‐α‐arylsulfanyl‐α,β‐unsaturated ketones in good yields. © 2009 Wiley Periodicals, Inc. Heteroatom Chem 20:218–223, 2009; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20536     

Elementary reaction analysis of the radical polymerization of α‐ethyl β‐N‐(α′‐methylbenzyl)itaconamates carrying (RS)‐ and (S)‐α‐methylbenzylaminocarbonyl groups

The polymerizations of α‐ethyl β‐N‐(α′‐methylbenzyl)itaconamates carrying (RS)‐ and (S)‐α‐methylbenzylaminocarbonyl groups (RS‐EMBI and S‐EMBI) with dimethyl 2,2′‐azobisisobutyrate (MAIB) were studied in methanol (MeOH) and in benzene kinetically and with electron spin resonance (ESR) spectroscopy. The initial polymerization rate (R_p) at 60 °C was given by R_p = k[MAIB]^{0.58 ± 0.05}[RS‐EMBI]^{2.4 ± 0.l} and R_p = k[MAIB]^{0.61 ± 0.05}[S‐EMBI]^{2.3 ± 0.l} in MeOH and R_p = k[MAIB]^{0.54 ± 0.05}[RS‐EMBI]^{1.7 ± 0.l} in benzene. The rate constants of initiation (k_df), propagation (k_p), and termination (k_t) as elementary reactions were estimated by ESR, where k_d is the rate constant of MAIB decomposition and f is the initiator efficiency. The k_p values of RS‐EMBI (0.50–1.27 L/mol s) and S‐EMBI (0.42–1.32 L/mol s) in MeOH increased with increasing monomer concentrations, whereas the k_t values (0.20?7.78 × 10⁵ L/mol s for RS‐EMBI and 0.18?6.27 × 10⁵ L/mol s for S‐EMBI) decreased with increasing monomer concentrations. Such relations of R_p with k_p and k_t were responsible for the unusually high dependence of R_p on the monomer concentration. The activation energies of the elementary reactions were also determined from the values of k_df, k_p, and k_t at different temperatures. R_p and k_p of RS‐EMBI and S‐EMBI in benzene were considerably higher than those in MeOH. R_p of RS‐EMBI was somewhat higher than that of S‐EMBI in both MeOH and benzene. Such effects of the kinds of solvents and monomers on R_p were explicable in terms of the different monomer associations, as analyzed by ¹H NMR. The copolymerization of RS‐EMBI with styrene was examined at 60 °C in benzene. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1819–1830, 2003     

1‐(β‐d‐Erythrofuranos­yl)cytidine (β‐erythrocytidine)

1‐(β‐d ‐Erythrofuranosyl)cytidine, C₈H₁₁N₃O₄, (I), a derivative of β‐cytidine, (II), lacks an exocyclic hydroxy­methyl (–CH₂OH) substituent at C4′ and crystallizes in a global conformation different from that observed for (II). In (I), the β‐d ‐erythrofuranosyl ring assumes an E₃ conformation (C3′‐exo; S, i.e. south), and the N‐glycoside bond conformation is syn. In contrast, (II) contains a β‐d ‐ribofuranosyl ring in a ³T₂ conformation (N, i.e. north) and an anti‐N‐glycoside linkage. These crystallographic properties mimic those found in aqueous solution by NMR with respect to furan­ose conformation. Removal of the –CH₂OH group thus affects the global conformation of the aldofuranosyl ring. These results provide further support for S/syn–anti and N/anti correlations in pyrimidine nucleosides. The crystal structure of (I) was determined at 200 K.     

Poly(α‐methyleneglutarimide)s from radical polymerization of α‐methyleneglutarimides

α‐Methyleneglutaric acid, a metabolite of niacin (nicotinic acid), can be easily converted to its cyclic anhydride. We report here the first conversion of α‐methyleneglutaric anhydride to (a series of) α‐methyleneglutarimides. These monomers can be radically polymerized to the title polymers. These have relatively high glass transition properties compared to the lower homologs derived from itaconimides (α‐methylenesuccinimides). © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1020–1026     

The α‐ and β‐epoxides of 3β‐acet­oxy‐5α‐lanost‐9(11)‐en‐7‐one

The structures of 3β‐acet­oxy‐9α,11α‐ep­oxy‐5α‐lanost‐9(11)‐en‐7‐one and 3β‐acet­oxy‐9β,11β‐ep­oxy‐5α‐lanost‐9(11)‐en‐7‐one, C₃₂H₅₂O₄, differ in their respective substituted cyclo­hexa­none rings but adopt similar conformations in the other three rings. In both of the crystal structures, weak inter­molecular C—H⋯O inter­actions are present.     

A moderate distortion of the `picket‐fence' porphyrin (cryptand‐222)potassium chlorido[meso‐α,α,α,α‐tetrakis(o‐pivalamidophenyl)porphyrinato]ferrate(II) n‐hexane monosolvate

As representative porphyrin model compounds, the structures of `picket‐fence' porphyrins have been studied intensively. The title solvated complex salt {systematic name: (4,7,13,16,21,24‐hexaoxa‐1,10‐diazabicyclo[8.8.8]hexacosane)potassium(I) [5,10,15,20‐tetrakis(2‐tert‐butanamidophenyl)porphyrinato]iron(II) n‐hexane monosolvate}, [K(C₁₈H₃₆N₂O₆)][Fe(C₆₄H₆₄N₈O₄)Cl]·C₆H₁₄ or [K(222)][Fe(TpivPP)Cl]·C₆H₁₄ [222 is cryptand‐222 or 4,7,13,16,21,24‐hexaoxa‐1,10‐diazabicyclo[8.8.8]hexacosane, and TpivPP is meso‐α,α,α,α‐tetrakis(o‐pivalamidophenyl)porphyrinate(2−)], [K(222)][Fe(TpivPP)Cl]·C₆H₁₄, is a five‐coordinate high‐spin iron(II) picket‐fence porphyrin complex. It crystallizes with a potassium cation chelated inside a cryptand‐222 molecule; the average K—O and K—N distances are 2.81 (2) and 3.05 (2) Å, respectively. One of the protecting tert‐butyl pickets is disordered. The porphyrin plane presents a moderately ruffled distortion, as suggested by the atomic displacements. The axial chloride ligand is located inside the molecular cavity on the hindered porphyrin side and the Fe—Cl bond is tilted slightly off the normal to the porphyrin plane by 4.1°. The out‐of‐plane displacement of the metal centre relative to the 24‐atom mean plane (Δ₂₄) is 0.62 Å, indicating a noticeable doming of the porphyrin core.     

Copper(I)‐Catalyzed Asymmetric [3+2]‐Cycloaddition of α‐Substituted Iminoesters with α‐Trifluoromethyl α,β‐Unsaturated Esters

Reported herein is an example of highly regio‐, diastereo‐ and enantioselective Cu(I)‐catalyzed intermolecular [3+2] cycloaddition reaction of α‐substituted iminoesters with α‐trifluoromethyl α,β‐unsaturated esters. This novel strategy provided a facile access to pyrrolidines with two skipped (aza)quaternary stereocenters including a CF₃ all‐carbon quaternary stereocenter. A broad substrate scope was observed and high yields (up to 94%) with excellent diastereoselectivity (up to >20 : 1 d.r.) and enantioselectivity (up to 98% ee) were obtained.     

α,α‐Dibromotoluene as a monomer for poly (substituted methylene) synthesis: Magnesium‐mediated polycondensation of α,α‐dibromotoluene and magnesium/copper‐mediated copolycondensation of α,α‐dibromotoluene with 1,6‐dibromohexane

α,α‐Dibromotoluene 1 was found to be polymerized by the reaction with excess Mg to give poly(phenylmethylene)s 2 , whose main chains were partially dehydrogenated to carbon–carbon double bonds (C?C). The C?Cs in 2 can be brominated by treatment with Br₂. The polymerization mechanism was presumed to include the formation of Grignard reagents of various species with benzylic C? Br bonds and the nucleophilic attacks of the Grignard reagents to various compounds with benzylic C? Br bonds. Copolymerization of 1 with dichlorodimethylsilane successfully proceeded. Mg/Cu‐mediated copolycondensation of 1 with 1,6‐dibromohexane proceeded to give polymers that have similar compositions to those of random copolymers of ethylene and styrene. © 2006Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5661–5671, 2006     

Stereocomplex formation between enantiomeric poly(α‐methyl‐α‐ethyl‐β‐propiolactones): Effect of molecular weight

Optically pure S(?) and R(+)‐poly(α‐methyl‐α‐ethyl‐β‐propiolactones) (PMEPLs) of controlled low molecular weights were synthesized by anionic polymerization of the corresponding optically active monomers, and characterized using gel permeation chromatography, Maldi‐TOF mass spectrometry, and NMR spectroscopy. Blends of PMEPLs of opposite configurations and different molecular weights were investigated. All blends lead to the formation of a stereocomplex and its crystallization prevails over a wide range of mixing ratios. The stereocomplex melts 30–40 °C above that of the corresponding pure polymers, depending on the molecular weight; pairs of polymers having similar molecular weights exhibit the highest melting temperatures and enthalpies of fusion. Finally, when the stereocomplex is dispersed in a PMEPL matrix, it acts as a very effective nucleation agent for the crystallization of the polymer in excess. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2380–2389, 2007     

Synthesis of β-（ 1→6）-Branched （ 1→3）-Glucononaoside with Alter-nate β- and α-Bonds in the Backbone

Lauryl glycoside of β-D-Glcp-(1→3)-[β-D-Glcp-(1→6)-]α-D-Glcp-(1→3)-β-D-Glcp-(1→3)-[β-D-Glcp-(1→6)-]α-D-Glcp-(1→3)-β-D-Glcp-(1→3)-[β-D-Glcp-(1→6)-]β-D-Glcp was synthesized through 3 3 3 strategy. 3-O-Allyl-2,4,6-tri-O-benzoyl-β-D-glucopyranosyl-(1→3)- -[2, 3, 4, 6-tetra-O-benzoyl-β-D-glucopyranosyl-(1→6)-] 1,2-O-isopropylidene-α-D-glucofuranose was used as the key intermediate which was converted to the corresponding trisaccharide donor and acceptor readily.     

2,4‐Bis(α,α‐di­methyl­benzyl)­phenol

The structure of the title compound, 2,4‐bis(1‐methyl‐1‐phenylethyl)phenol, C₂₄H₂₆O, was found to have a torsion angle of 129.95 (13)° for the C—C bond that connects the benzyl carbon to the phenol ring ortho to the OH group. A value of ～50° was expected from molecular mechanics calculations. Intermolecular interactions, in particular O—H?O and edge–face π bonding, may contribute to this discrepancy. Intramolecular O—H?π bonding is also observed.     

Kinetic and ESR studies on the radical polymerization of α‐n‐(α′‐methylbenzyl) β‐ethyl itaconamates derived from racemic and (s)‐α‐methylbenzylamines

The polymerization of α‐N‐(α′‐methylbenzyl) β‐ethyl itaconamate derived from racemic α‐methylbenzylamine (RS‐MBEI) by initiation with dimethyl 2,2′‐azobisisobutyrate (MAIB) was studied in methanol kinetically and with ESR spectroscopy. The overall activation energy of polymerization was calculated to be 47 kJ/mol, a very low value. The polymerization rate (R_p ) at 60 °C was expressed by R_p = k[MAIB]^0.5±0.05[RS‐MBEI]^2.9±0.1. The rate constants of propagation (k_p ) and termination (k_t ) were determined by ESR. k_p was very low, ranging from 0.3 to 0.8 L/mol s, and increased with the monomer concentration, whereas k_t (4–17 × l0⁴ L/mol s) decreased with the monomer concentration. Such behaviors of k_p and k_t were responsible for the high dependence of R_p on the monomer concentration. R_p depended considerably on the solvent used. S‐MBEI, derived from (S)‐α‐methylbenzylamine, showed somewhat lower homopolymerizability than RS‐MBEI. The k_p value of RS‐MBEI at 60 °C in benzene was 1.5 times that of S‐MBEI. This was explicable in terms of the different molecular associations of RS‐MBEI and S‐MBEI, as analyzed by ¹H NMR. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4137–4146, 2000