Nafion/Poly(sodium 4‐styrenesulfonate) Mixed Coating Modified Bismuth Film Electrode for the Determination of Trace Metals by Anodic Stripping Voltammetry

To improve the reproducibility, stability, and sensitivity of bismuth film electrode (BiFE), we studied the performances of a mixed coating of two cation‐exchange polymers, Nafion (NA) and poly(sodium 4‐styrenesulfonate) (PSS), modified glassy carbon BiFE (GC/NA‐PSS/BiFE). The characteristics of GC/NA‐PSS/BiFE were investigated by scanning electron microscopy and cyclic voltammetry. Various parameters were studied in terms of their effect on the anodic stripping voltammetry (ASV) signals. Under optimized conditions, the limits of detection were 71 ng L^?1 for Cd(II) and 93 ng L^?1 for Pb(II) with a 10 min preconcentration. The results exhibited that GC/NA‐PSS/BiFE can be a reproducible and robust tool for monitor of trace metals by ASV rapidly and environmentally friendly, even in the presence of surface‐active compounds.     

Voltammetric Detection of the Herbicide Metamitron at a Bismuth Film Electrode in Nondeaerated Solution

In this work, we present a novel application of bismuth film electrodes (BiFE) for the direct analysis of the herbicide metamitron (4‐amino‐3‐methyl‐6‐phenyl‐1,2,4‐triazin‐5one) in nondeaerated solutions by square‐wave voltammetry (SWV) and differential pulse amperometry. Bismuth films were plated ex‐situ onto carbon paste electrodes (CPE) by 240 s deposition at ?0.600 V from a 0.10 M acetate buffer (pH 4.5) containing 0.50 mM bismuth nitrate. Metamitron SWV analytical signals were registered in 0.10 M acetate buffer (pH 4.5) solutions, where the herbicide reduction takes place at ?0.675 V. The metamitron signals obtained with BiFE have the double sensitivity and a 50 mV positive potential shift when compared to those obtained with plain CPE. Under these conditions, the dynamic linear range of concentrations is comprised between 10 and 200 μM and the detection limit is 2 μM.     

Investigation of Copper(II) Interference on the Anodic Stripping Voltammetry of Lead(II) and Cadmium(II) at Bismuth Film Electrode

The bismuth‐coated electrode is known to be prone to errors caused by copper(II). This study investigates copper(II) interference at bismuth film electrode for the detection of lead(II) and cadmium(II). It was conducted using glassy carbon electrode, while the bismuth film was plated in situ simultaneously with the target metal ions at ? 1200 mV. Copper(II) presented in solution significantly reduced the sensitivity of the electrode, for example there was an approximately 70 % and 90 % decrease in peak signals for lead(II) and cadmium(II), respectively, at a 10‐fold molar excess of copper(II). The decrease in sensitivity was ascribed to the competition between copper and bismuth or the metal ions for surface active sites. Scanning electron microscopy (SEM) and energy dispersive X‐ray (EDX) analysis suggested a large decrease in the amount of bismuth nanoparticles formed on the electrode surface in the presence of copper(II) occurred, validating the competition between copper and bismuth ions for surface active sites. Recovery of the stripping signal of lead(II) and cadmium(II) was obtained by adding ferrocyanide ion to the solution. Finally, the proposed method was successfully applied to determine lead(II) and cadmium(II) in water samples and the method was validated by ICP‐MS technique.     

A Study on Operational Parameters for Advanced Use of Bismuth Film Electrode in Anodic Stripping Voltammetry

A study is presented on the characterization, evaluation and optimization of several key operational parameters for a reliable and effective use of a bismuth film electrode (BiFE) as an advanced replacement of the mercury film electrode in anodic stripping voltammetric measurements of trace heavy metals. Applying in situ preparation of the BiFE and employing lead(II) and cadmium(II) as model analyte ions, key parameters including bismuth precursor salt and substrate surface (platinum, gold, glassy carbon, carbon paste, carbon fiber) for bismuth plating, concentration as well as cationic and anionic composition of the measurement solution, solution pH and temperature, potential interferents, and stripping modes were carefully examined for their effects in the preconcentration and stripping steps. Parameters such as substrate surface (except platinum), precursor salt, solution matrix and temperature showed no or little impact on the BiFE performance in stripping analysis. On the other hand, the BiFE performance was found to be dependent on the solution pH (with maximum efficiency in the range of 4 to 5), on the stripping mode (with square‐wave voltammetry as the best choice) and to a certain degree on the presence of surface active substances. The results revealed that the non‐toxic solid‐state BiFE is applicable under a wide variety of conditions which proves it highly suitable for practical work in environmental trace heavy metal analysis.     

Ionophore Based Bismuth Film Electrode for Lead

Abstract

A Nafion/ionophore, 4-tert-butylcalix[4]arene-tetrakis(N,N-dimethylthioacetamide) composite coated and bismuth film modified glassy carbon electrode. (GC/NA-IONO/BiFE) was described to determine trace lead sensitively and selectively. The characteristics of such modified GC/NA-IONO/BiFE were studied by scanning electron microscopy and cyclic voltammetry. The influence of various experimental parameters upon the stripping lead signal at the GC/NA-IONO/BiFE was explored. Under the optimized conditions, the differential pulse voltammetric stripping response is highly linear over the 0.1–8.0 nM lead range examined (180 s preconcentration at ?1.2 V), with a detection limit of 0.044 nM and good precision (RSD = 5.4% at 0.5 nM). Also applicability to seawater samples was demonstrated at such modified electrode. The high selectivity of ionophore coupled with the excellent electrochemical characteristics of bismuth endow the GC/NA-IONO/BiFE a promising and robust tool for monitoring of trace lead rapidly and precisely.     

Differential Pulse Voltammetric Determination of Paraquat Using a Bismuth‐Film Electrode

A bismuth‐film electrode (BiFE) ex situ electrochemically deposited onto a copper substrate has been presented for paraquat determination. The bismuth film was electrochemically deposited at an applied potential of ?0.18 V vs. Ag/AgCl (3.0 M KCl) for 200 s. The analytical curve was linear in the paraquat concentration range from 6.6×10^?7 M to 4.8×10^?5 M with a limit of detection of 9.3×10^?8 M. The method presented satisfactory results at a confidence level of 95% and the performance was evaluated in water samples.     

Bismuth Film Electrode for Analysis of Tetracycline in Flow Injection System

A bismuth film was prepared on glassy carbon electrode (GCE) and used in a flow injection amperometric system to analyze tetracycline. Bismuth film electrode (BiFE) preparation and flow injection amperometric parameters were optimized. System performances of BiFE were compared to GCE. BiFE was validated with three different lots of real sample, 250 mg tetracycline capsules, the results showed good agreement, i.e., between 240 and 260 mg per capsule. Good relative recoveries were also obtained in the range of 86–106%.     

Bismuth film electrode for anodic stripping voltammetric determination of tin

The bismuth film electrode (BiFE), in combination with anodic stripping voltammetry, offers convenient measurement of low concentrations of tin. The procedure involves simultaneous in situ formation of the bismuth film electrode on a glassy carbon substrate electrode, together with electrochemical deposition of tin, in a non-deaerated model solution containing bismuth ions, catechol as complexing agent and the metal analyte, followed by an anodic stripping scan. The BiFE is characterized by an attractive electroanalytical performance, with two distinct voltammetric stripping signals corresponding to tin, accompanied with low background contributions. Several experimental parameters were optimized, such as concentration of bismuth ions and catechol, deposition potential, deposition time and pH of the model solution. In addition, a critical comparison is given with bare glassy carbon and mercury film electrodes, revealing the superior characteristics of BiFE for measurement of tin. BiFE exhibited highly linear behavior in the examined concentration range from 1 to 100 μg L⁻¹ of tin (R² = 0.997), an LoD of 0.26 μg L⁻¹ tin, and good reproducibility with a calculated R.S.D. of 7.3% for 10 μg L⁻¹ tin (n = 10). As an example, the practical applicability of BiFE was tested with the measurement of tin in a real sample of seawater.     

Electrodeposition of mesoporous semimetal and magnetic metal films from lyotropic liquid crystalline phases

Mesoporous semimetal bismuth film and magnetic metal nickel and cobalt thin films have been electrodeposited from hexagonal or lamellar structured lyotropic liquid crystalline phases with polyoxyethylene surfactant. The liquid crystalline templates are characterized by low-angle X-ray diffraction (XRD) and polarized-light optical microscopy (POM). The metal films are characterized by low-angle and wide-angle XRD, scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The magnetic measurements on the mesoporous nickel and cobalt films are shown to have higher coercivity (Hc) than the nonporous polycrystalline films.     

Direct Patterning of Copper on Polyimide by Site‐Selective Surface Modification via a Screen‐Printing Process

We demonstrate a simple route to fabricating copper circuit patterns on the surface of polyimide film. The copper pattern can be obtained in three steps: 1) Formation of partially potassium hydroxide modified pattern via a screen‐printing process, 2) formation of macromolecular metal complex with copper, and 3) copper metallization by DMAB reduction. The morphologies of these copper patterns are determined by cross‐sectional transmission electronic microscopy (TEM), scanning electronic microscopy (SEM), and atomic force microscopy (AFM). Furthermore, the growing process of the metallic copper film is investigated. The direct patterning of copper patterns onto polyimide substrates is promising for use in electronics industry as a large‐area and low‐cost processing technique.     

Voltammetric Behavior of Testosterone on Bismuth Film Electrode: Highly Sensitive Determination in Pharmaceuticals and Human Urine by Square‐Wave Adsorptive Stripping Voltammetry

In this paper, an electrochemical application of bismuth‐film electrode (BiFE) fabricated via ex‐situ electrodeposition onto a glassy carbon electrode for testosterone determination was investigated in aqueous and aqueous/surfactant solutions. In cyclic voltammetry, the compound showed one irreversible and adsorption‐controlled reduction peak. The BiFE revealed good linear response in the examined concentration range of 1 to 45 nmol L^?1 testosterone in Britton? Robinson buffer, pH 5.0 containing 3 mmol L^?1 cetyltrimethylammonium bromide. The limit of detection was 0.3 nmol L^?1 (0.09 ng mL^?1). Finally, the BiFE was satisfactorily applied for quantitation of testosterone in both pharmaceutical (oil‐based ampoule) and biological (human urine) samples.     

Novel strategy in enhancing stability and corrosion resistance for hydrophobic functional films on copper surfaces

A rod-like 1-dodecanethiol film assisted with the preferential adhesion of polydopamine was prepared on the non-etching copper surfaces by a simple dip-coating method. The formation and surface structure of the film were characterized by water contact angle measurement, scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS). Once the 1-dodecanethiol film formed on the polydopamine-coated copper surface, the hydrophilic surface changed to hydrophobic. The corrosion behavior of the functional films was evaluated by the electrochemical impedance spectroscopy (EIS). The excellent corrosion resistance property could be ascribed to the compact film structure and good seawater stability for modified copper surface, especially in limiting the infiltration of Cl⁻.     

Synthesis of a nanocomposite containing a water‐soluble polythiophene derivative and gold nanoparticles

This paper reports on a facile method for synthesizing gold nanoparticles (AuNps) with diameter around 5 nm encapsulated with water‐soluble polythiophene sulfonate poly[2‐(3‐thienyl)ethyloxy‐4‐butylsulfonate] sodium salt (PTS) and their physical–chemical characterization. The synthesis of hybrid materials of polythiophene derivatives and gold nanoparticles is a way to improve the polymer properties, mainly in application for chemical and optical sensing platforms. The AuNps were prepared by reducing gold salt with acid aqueous sodium citrate by the Turkvich method in the presence of PTS, and both PTS and citrate helped to stabilize the AuNps. The suspensions of AuNp:PTS presented good chemical and photostability for long period of storage. The nanoparticles encapsulated with the polymer presented smaller diameters than those obtained using only sodium citrate, according to scanning electron microscopy images. The AuNps obtained were used for fabrication LbL films with commercial chitosan, which were characterized by impedance spectroscopy measurements. The results showed that the charge transfer resistance values (R_ct) decrease as the average diameter of the AuNps decreases and the proportion of PTS increases in the nanocomposite. Such increase of the nanocomposite conductivity, given by the low values of R_ct, indicates that the novel film architecture developed is promising for chemical sensing applications. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1245–1254     

Performance of Ex Situ Bismuth Film Rotating Disk Electrode in Trace Metal Analysis by Stripping Chronopotentiometry: Definition of the Depletion Regime and Optimization of Experimental Parameters

The potentiality of the ex situ deposited bismuth film electrode, allied to the rotation of a glassy carbon disk electrode (BiFE‐RDE), was exploited in trace metal analyses of lead(II) and cadmium(II) by stripping chronopotentiometry (SCP). A single BiFE (6.2 nm film thickness) can be used for a 1‐day term with no significant variation in the analytical signal. The limit of detection (3σ) for a deposition time of 40 s and an oxidation current of 15×10^?9 A was 1.5×10^?8 M for Pb(II) and 3.0×10^?8 M for Cd(II). BiFE‐RDE was successfully applied to the direct SCP determination of lead(II) in a fresh water certified material.     

Cathodic Electrochemical Detection of Nitrophenols at a Bismuth Film Electrode for Use in Flow Analysis

The bismuth film electrode (BiFE) is presented for use in both batch voltammetric and flow injection (FI) amperometric detection of some nitrophenols (2‐nitrophenol, 2‐NP; 4‐nitrophenol, 4‐NP; 2,4‐dinitrophenol, 2,4‐DNP). The bismuth film was deposited ex situ (batch measurements) and in‐line (FI) onto a glassy carbon substrate electrode. Batch analysis of the nitrophenols was carried out in 0.04 M Britton Robinson (BR) buffer pH 4, while for FI measurements, a carrier/electrolyte solution composed of 0.1 M BR buffer pH 4 mixed with methanol (20+80, v/v%) was employed to resemble media used in preconcentration/clean‐up and flow separation sample pretreatment procedures. Under batch conditions, the voltammetric behavior of the nitrophenols was examined for dependence on medium pH in the range of 2 to 10. Employing the square‐wave voltammetry mode, the limits of detection were 0.4 μg L^?1, 1.4 μg L^?1, and 3.3 μg L^?1 for 2‐NP, 4‐NP, and 2,4‐DNP, respectively. Under flow conditions, a simple in‐line electrochemical bismuth film renewal procedure was tested and shown to provide very good inter‐ and intra‐electrode reproducibility of the current signals at low μg L^?1 analyte concentrations. The limits of detection for 2‐NP, 4‐NP and 2,4‐DNP obtained using FI and amperometric detection at ?1.0 V (vs. Ag/AgCl) were 0.3 μg L^?1, 0.6 μg L^?1 and 0.7 μg L^?1, respectively, with linear ranges extending up to 20 μg L^?1. The attractive performance of the BiFE under flow analysis conditions offers great promise with respect to its detection capability and to its use for a prolonged period of time with no need for inconvenient removal of the electrode from the system for mechanical surface treatment.     

Peculiarities of Electrochemical Bismuth Film Formation in the Presence of Bromide and Heavy Metal Ions

Bi films were deposited on glassy carbon electrode from solutions with and without KBr. The morphology of both types of the films was characterized by scanning electron microscopy (SEM), and their electrochemical behavior was studied by square wave (SWV) and cyclic voltammetry (CV). Bi films were also co‐deposited with common analyte‐heavy‐metals in the presence of KBr and these films also were characterized by SEM, SWV and CV in order to understand the formation of the mixed metal films. All films studied had a different morphology. Bromide addition made the Bi films more compact and uniform, whereas Pb catalyzed Bi film deposition.     

液相法制备具有双尺寸粗糙度的超疏水铜表面

基于简单的液相法,以硫代硫酸钠和氯化铜为原料在铜片表面上构筑了具有微/纳米双尺寸粗糙度的硫化铜膜.用X射线衍射(XRD)仪、扫描电镜(SEM)、能量色散X射线(EDX)光谱仪及光学视频接触角仪对处理前后的铜表面进行了表征和分析.处理后的超亲水铜表面经硬脂酸修饰后具有超疏水效应,静态接触角高达161°,5μL水滴滚动角低至2.5°左右.超疏水性能归因于表面具有双尺寸粗糙度和低表面能的硬脂酸.该方法简单,无需复杂制备过程和苛刻设备,所得超疏水铜表面具有优异的不粘附性、长时间储存的稳定性和一定的耐摩擦性能.     

Differential pulse anodic stripping voltammetry detection of metallothionein at bismuth film electrodes

As a representation of metalloproteins, metallothionein (MT), which plays important biological and environmental roles such as in the metabolism and detoxification of some metals, was detected at bismuth film electrode (BiFE) by differential pulse anodic stripping voltammetry (DPASV). In pH 2–5.5, two well-defined anodic peaks were produced and attributed to the Zn²⁺ and Cd²⁺ inherent to MT. The calibration plot of DPASV peak currents for Cd²⁺ inherent to MT versus MT concentrations showed a good linearity with a detection limit of 3.86 × 10⁻⁸ mol/L for MT. As a non-toxic excellent electrode material, BiFE shows good performance for detecting MT, and is expected to find further applications in the studies of many other metalloproteins.     

Bismuth film electrode for simultaneous adsorptive stripping analysis of trace cobalt and nickel using constant current chronopotentiometric and voltammetric protocol

Bismuth film electrode (BiFE) is presented as a promising alternative to mercury electrodes for the simultaneous determination of trace cobalt and nickel in non-deoxygenated solutions. The preplated BiFE was employed under adsorptive stripping constant current chronopotentiometric and adsorptive stripping voltammetric conditions in the presence of dimethylglyoxime complexing agent. BiFE exhibited well-defined and undistorted signals with favorable overall resolution for cobalt and nickel cations, with the signals for both metal cations being practically independent of each other. The stripping performance of BiFE is characterized by good reproducibility (RSD 1.4% for Co(II), and 4.3% for Ni(II)), low detection limits of 0.08 μg l⁻¹ for Co(II) and 0.26 μg l⁻¹ for Ni(II) employing a deposition time of 60 s, in addition to good linearity. The non-toxic character of bismuth imparts the possibility of tailoring disposable and one-shot electrochemical sensors for decentralized environmental, clinical and industrial monitoring of trace cobalt and nickel.     

Validation of bismuth film electrode for determination of cobalt and cadmium in soil extracts using ICP-MS

A study is presented on the use of the bismuth film electrode (BiFE) operated in the anodic stripping and the cathodic adsorptive stripping voltammetry (ASV, CAdSV) modes, for the determination of two trace heavy metals (Cd and Co, respectively), in soil extract samples. Two types of BiFE were examined in this study: the in situ prepared BiFE, which was employed in ASV determination of Cd, and the ex situ prepared BiFE, which was used in CAdSV of Co with dimethylglyoxime (DMG) as complexing agent. A series of unpretreated soil extracts with varying Cd and Co concentrations were analyzed, and the results obtained compared to those determined using inductively coupled plasma-mass spectrometry (ICP-MS). The results revealed the suitability of stripping analysis at the BiFE for determination of μg l⁻¹ levels of heavy metals in soil extracts. The promising results obtained here, coupled with the non-toxic nature of bismuth (in comparison to commonly used mercury electrodes employed in stripping analysis), offer great promise in centralized and decentralized analysis of trace heavy metals in complex environmental matrices.