Impurity profiling of dexamphetamine sulfate by cyclodextrin‐modified microemulsion electrokinetic chromatography

A CD‐modified microemulsion electrokinetic chromatography method has been developed and validated for dexamphetamine sulfate which allows the simultaneous determination of charged and uncharged impurities of the drug including the levorotary (R)‐enantiomer. The optimized background electrolyte consisted of 1.5% w/w SDS, 0.5% w/w ethyl acetate, 3.5% w/w 1‐butanol, 2.5% w/w 2‐propanol and 92% w/w 50 mM sodium phosphate buffer, pH 3.0, containing 5.5% w/w sulfated β‐CD. Separations were performed in a 50.2/40 cm, 50 μm id fused silica capillary at a temperature of 20°C and an applied voltage of ?14 kV. Carbamazepine was used as internal standard. The assay was validated in the range of 0.1–1.0% for the related substances and 0.1–5.0% for levoamphetamine based on a concentration of 3 mg/mL of dexamphetamine sulfate. The LOD of all analytes ranged between 0.05 and 0.2%. In commercial samples of dexamphetamine sulfate, levoamphetamine was found at concentrations between 3.2 and 3.8%, whereas none of the other impurities could be detected.     

Comparison of microemulsion electrokinetic chromatography and solvent modified micellar electrokinetic chromatography on rapid separation of heroin, amphetamine and their basic impurities

Microemulsion electrokinetic chromatography (MEEKC) and solvent modified micellar electrokinetic chromatography (MEKC) were investigated with the goal of the rapid separation of complex heroin and amphetamine samples. The rapid simultaneous separation of 17 species of heroin, amphetamine and their basic impurities and adulterants was performed within about 10 min using MEEKC for the first time, whereas solvent modified MEKCs were unable to resolve all the components. The comparisons between MEEKC and solvent modified MEKC proved internal lipophilic organic phase in microemulsions played an important role in improving the separation performance with respect to efficiency. However, the role of internal lipophilic organic phase in MEEKC was disgusted at high concentrations of cosurfactant, and the separations of MEEKC and 1-butanol modified MEKC became similar at high concentrations of 1-butanol. The evaluation of reproducibility, linearity and detection limit of optimized MEEKC method provided good results for all the analytes investigated, thus allowing its application to real controlled drug preparation analysis.     

Enantioseparation of hydroxyeicosatetraenoic acids by hydroxypropyl‐γ‐cyclodextrin‐modified micellar electrokinetic chromatography

Complete resolution of hydroxyeicosatetraenoic acid (HETE) enantiomers was achieved using hydroxypropyl‐γ‐cyclodextrin (HP‐γ‐CD)‐modified MEKC. The optimum running conditions were determined to be utilizing a 30 mM phosphate–15 mM borate buffer (pH 9.0) containing 30 mM HP‐γ‐CD and 75 mM SDS as the BGE, application of +30 kV as the effective voltage, and carrying out the experiment at 15°C. The eluents were detected at 235 nm. The method was used successfully for the simultaneous separations of (S)‐ and (R)‐enantiomers of regioisomeric 8‐, 11‐, 12‐, and 15‐HETEs. Subsequently, the optimized method was applied to evaluate the stereochemistry of 8‐ and 12‐HETEs from the marine red algae, Gracilaria vermiculophylla and Gracilaria arcuata, respectively. The 8‐HETE was found to be a mixture of 98% (R)‐enantiomer and 2% (S)‐enantiomer, while the 12‐HETE was a mixture of 98% (S)‐enantiomer and 2% (R)‐enantiomer. The present study demonstrates that the HP‐γ‐CD‐modified MEKC method is simple and sensitive and provides unambiguous information on the configuration of natural and synthetic HETEs.     

Chiral separation of raltitrexed by cyclodextrin-modified micellar electrokinetic chromatography

A rapid and effective method was developed for the chiral separation of raltitrexed (RD) enantiomers by carboxymethyl-beta-cyclodextrin (CM-β-CD)-modified micellar electrokinetic chromatography (MEKC). Optimization of conditions including the type and concentration of the chiral selector, concentration of sodium dodecyl sulfate (SDS), pH and concentration of the background electrolyte (BGE), capillary temperature, and applied voltage was investigated. The enantiomers of raltitrexed could be separated with satisfactory resolution and linear response by using 75 mM Tris-phosphate at pH 8.0 containing 30 mM SDS and 8 mM CM-β-CD as buffer system. Furthermore, the usefulness of this method was demonstrated in a purity test of a real synthetic drug sample. Figure Chiral separation of raltitrexed by CM-β-CD MEKC was optimized and applied to test the purity of a synthetic drug sample     

Application of micellar and microemulsion electrokinetic chromatography for characterization of gallium(III) complexes of pharmaceutical significance

CE with conventional UV detection has recently been shown as a highly effective means to assaying cytotoxic gallium(III)-based compounds with regard to desirable drug-like properties such as the stability and binding to serum proteins. In this extension of that work, different CE techniques are used to further characterize a given set of gallium coordination compounds with established antiproliferating efficacy. Using free-zone CE mode, the electrophoretic profiles of complexes are recorded in order to assess their actual charge state under physiological buffer conditions. Micellar and microemulsion electrokinetic chromatographic techniques are tested as tools for the rapid estimation of the n-octanol-water partition coefficient (log P) that provides a rationale estimate of a drug's ability to cross biological membranes. A range of electrolyte buffer systems with varying (both in the nature and concentration) organic modifiers are examined to evaluate their effect on the relationship between experimental or calculated log P and the retention factors of compounds (log k'). Both methods were found to be better applicable for neutral than for cationic Ga complexes, the microemulsion mode demonstrating superior lipophilicity estimations as well as statistically meaningful log P versus log k' correlations when all the complexes were included in one regression set.     

Micellar and microemulsion electrokinetic chromatography of hop bitter acids

The elution order of the hop α- and β-acids has been studied under different modes of electrokinetic separation. A model is advanced to explain the shorter migration times of the more hydrophobic β-acids compared to the α-acids in micellar electrokinetic chromatography (MEKC). For quality control of the bitter principles in hops, the ruggedness of electrokinetic separation could be improved by replacing MEKC by microemulsion electrokinetic chromatography (MEEKC).     

Effect of microemulsion component purity on the chromatographic figures of merit in chiral microemulsion electrokinetic chromatography

Numerous combinations of one-, two-, and three-chiral-component microemulsions have been previously prepared in our group, using N-dodecoxycarbonylvaline (DDCV), 2-hexanol, and ethyl acetate, dibutyl tartrate, or diethyl tartrate. A few results of the various formulations investigated suggested the possible presence of minor impurities in one or more components of the microemulsion. In this study, the purity of the current lots of R- and S-surfactant were measured, as was the subsequent effect of minor impurities on the relevant chromatographic figures of merit (CFOMs) that describe a chiral separation, i.e., efficiency, enantioselectivity, retention, migration window (elution range), and resolution. Two related methods are proposed for correcting enantioselectivities measured in the presence of chiral impurities in the chiral microemulsion.     

Chiral separation of trimetoquinol hydrochloride and related compounds by micellar electrokinetic chromatography using sodium taurodeoxycholate solutions and application to optical purity determination

The chiral separation of trimetoquinol hydrochloride, which is a bronchodilator (Inolin), and three related compounds by micellar electrokinetic chromatography was investigated using a bile salt as a chiral surfactant. Enantiomers of these compounds, except laudanosoline, were successfully separated within 12 min using a separation tube of effective length 500 mm × 0.05 rum i.d. and a 0.05 M sodium taurodeoxycholate solution of pH 7.0. The observed theoretical plate numbers of the peaks were ca. 150000. Chiral recognition was affected by the structure of bile salts, the pH of the buffer solutions used and the structure of the solutes. Of four kinds of bile salts, successful chiral separation was achieved only using sodium taurodeoxycholate solution under neutral conditions. The method was applied to the optical purity determination of trimetoquinol hydrochloride. The effects of surfactant concentrations and some additives to the micellar solution are briefly described.     

Separation of some chiral flavonoids by microbial cyclosophoraoses and their sulfated derivatives in micellar electrokinetic chromatography

Neutral cyclosophoraoses (Cys) and highly sulfated cyclosophoraoses (HS-Cys) were successfully applied as chiral selectors with SDS for the separation of some chiral flavonoids in MEKC. HS-Cys were synthesized by the chemical modification of a family of neutral Cys isolated from a soil microorganism, Rhizobium meliloti 2011. Chiral catechin was separated with a resolution (R(s)) of 0.754 by neutral Cys and SDS. In the case of isosakuranetin and neohesperidin, resolution (R(s)) values of 1.483 and 1.306 were obtained with HS-Cys and SDS, respectively.     

Dodecyl thioglycopyranoside sulfates: novel sugar-based surfactants for enantiomeric separations by micellar electrokinetic capillary chromatography

Four novel chiral anionic surfactants having carbohydrate hydrophilic heads, sodium n-dodecyl 1-thio-beta-D-glucopyranoside 6-hydrogen sulfate (6-betaGlcD), sodium n-dodecyl 1-thio-beta-L-glucopyranoside 6-hydrogen sulfate (6-betaGlcL), sodium n-dodecyl 1-thio-beta-L-fucopyranoside 3-hydrogen sulfate (3-betaFucL), and sodium n-dodecyl 1-thio-alpha-L-rhamnopyranoside 3-hydrogen sulfate (3-alphaRhaL), were synthesized by selective sulfation of the corresponding thioglycosides. Their CMC determined by fluorescence using pyrene as a probe in water was 1.3-2.7 mM. These surfactants found to be useful as chiral selectors for enantiomeric separation by MEKC. The enantiomeric separation was optimized with respect to pH, buffer concentration, and surfactant concentration. Under the optimized conditions (50 mM phosphate buffer at pH 6.5, 30 mM surfactant, 20 kV), the enantiomeric separations of five dansylated amino acids (Dns-AAs) were achieved within approximately 20 min with the migration order of Val相似文献   

Simultaneous separation of sixteen positional and optical isomers of the tryptophan family by ligand-exchange micellar electrokinetic chromatography

Summary Ligand-exchange micellar electrokinetic chromatography has been used for the simultaneous separation of 16 positional and optical isomers of the tryptophan family. The Cu(II) complex with L-hydroxyproline was used as the chiral selector. Two groups of anionic surfactant, linear alkylbenzenesulfonates (LAS) and straight-chain alkyl sulfates such as sodiumn-decyl sulfate (SDeS), sodium dodecyl sulfate (SDS) and sodiumn-tetradecyl sulfate (STS), were used for simultaneous separation. The best result was obtained by use of SDS. The influence of SDS concentration and of pH on the separation was investigated. The separation behavior in the absence of the Cu(II) complex with L-hydroxyproline was also examined. Use of organic modifiers causes the resolution to decrease. Relationships between the logarithm of the octanol-water partition coefficient (logP _OW) and resolution, and between logP _OW and migration time are discussed.     

Retention indices in micellar electrokinetic chromatography

The use of retention indices in micellar electrokinetic chromatography (MEKC) is evaluated both from a theoretical and a practical point of view. Fundamental equations for the determination of retention indices in MEKC are described, showing that retention indices are independent of the surfactant concentration. Possibilities as well as limitations of different homologous series as reference standards are described. In addition, the practical application of retention indices for identification, investigation of solute-micelle interactions, characterization and classification of pseudo-stationary phases and determination of solute lipophilicity are discussed.     

Verification of statistical-overlap theory in micellar electrokinetic chromatography

The limited peak capacity of neutral compounds in micellar electrokinetic chromatography (MEKC) causes peak overlap in a simple 38-compound sample that is predicted by statistical-overlap theory (SOT). The low-concentration sample was prepared in-house from several compound classes to span the entire migration-time range and was resolved partially in a pH=7 phosphate buffer containing 50 mM sodium dodecyl sulfate. Peaks, singlets, doublets, and other multiplets were identified on the basis of known migration times and were counted at 13 voltages spanning 4 – 26 kV. These numbers agreed well with predictions of a simple SOT based on the assumption of an inhomogeneous Poisson distribution of migration times. Because the dispersion theory of MEKC is simple, the standard deviations of single-component peaks were modeled theoretically. As part of a new way to implement SOT, probability distributions of the numbers of peaks, singlets, and so on, were computed by Monte Carlo simulation. These distributions contain all theoretical information on peak multiplicity predictable by SOT and were used to evaluate the agreement between experiment and theory. The peak capacity of MEKC was calculated numerically and substituted into the simplest equations in SOT, affirming that peak overlap arises from limited peak capacity.     

Microstructure of microemulsion modified with ionic liquids in microemulsion electrokinetic chromatography and analysis of seven corticosteroids

In this work, the influences of ionic liquid (IL) as a modifier on microemulsion microstructure and separation performance in MEEKC were investigated. Experimental results showed that synergetic effect between IL 1‐butyl‐3‐methylimidazolium tetrafluoro‐borate (BmimBF₄) and surfactant SDS gave a decreased CMC. With increment of IL in microemulsion, negative ζ potential of the microdroplets reduced gradually. The influence of IL on the dimensions of microdroplet was complicated. At BmimBF₄ less than 8 mM, IL made microemulsion droplet smaller in size. While at BmimBF₄ more than 10 mM, the size increased and reached to a maximum value at 12 mM, where the microdroplets were larger than that without IL. After that, the micreodroplet size decreased again. Relative fluorescence intensity of the first vibration band of pyrene to the third one (I₁/I₃) enhanced as IL was added to microemulsion, which indicated that this addition increased environmental polarity in the inner core of microdroplets. Prednisone, hydrocortisone, prednisolone, hydrocortisone acetate, cortisone acetate, prednisolone acetate, and triamcinolone acetonide were analyzed with MEEKC modified with IL to evaluate the separation performance. Cortisone acetate and prednisolone acetate could not be separated at all in typical microemulsion. The seven analytes could be separated by the addition of 10 mM BmimBF₄ into the microemulsion system. The method has been used for analysis of corticosteroids in cosmetic samples with simple extraction; the recoveries for seven analytes were between 86 and 114%. This method provides accuracy, reproducibility, pretreatment simplicity, and could be applied to the quality control of cosmetics.     

Analyses of phenolic compounds by microemulsion electrokinetic chromatography

In this study, a microemulsion electrokinetic chromatography (MEEKC) method was developed to analyze and detect 13 phenolic compounds (syringic acid, p-cumaric acid, vanillic acid, caffeic acid, gallic acid, 3,4-dihydroxybenzoic acid, 4-hydroxybenzoic acid, (+)-catechin, (-)-epigallocatechin, (-)-epicatechin gallate, (-)-epigallocatechin gallate, (-)-epicatechin, and (-)-gallocatechin), which are present in many plant-derived foods. The effects of cosurfactant, organic modifier, and oil were examined in order to optimize the separation of these phenolic compounds. The amounts of cosurfactant (cyclohexanol) and organic modifier (acetonitrile) were determined as the major influence on the separation selectivity, while the type of oil partially affected the separation resolution of the phenolic compounds. A highly efficient MEEKC separation method was achieved within 14 min by using a microemulsion solution of pH 2.0 containing 2.89% w/v SDS, 1.36% w/v heptane, 7.66% w/v cyclohexanol, and 2% w/v ACN. Furthermore, the present work could demonstrate that the nature of the oil phase has a significant influence on the separation selectivity of phenolic compounds.     

Trace analysis of rapamycin in human blood by micellar electrokinetic chromatography

A capillary electrophoretic method with UV detection at 278 nm has been developed for analysis of the immunosuppressant rapamycin (sirolimus) in human blood at low microgram per liter levels. Separation has been achieved in an acidic carrier electrolyte containing sodium dodecylsulfate and 30% (v/v) acetonitrile. For sample clean-up and preconcentration, an off-line solid-phase extraction step using a silica-based reversed-phase material and an on-capillary focussing technique were employed. The latter allows the injection of increased sample volumes without excessive band broadening. Although this new method is less sensitive than existing liquid chromatographic procedures combined with mass spectrometry, it is fully suited to routine analysis of rapamycin in blood from patients treated with this drug. Last but not least the low costs make it an attractive alternative to established methods.     

Separation of anabolic steroids by micellar electrokinetic capillary chromatography

Summary The separation of seven analogous anabolic steroids was studied by micellar electrokinetic capillary chromatography (MECC). The retention order was found to be dependent on polarity. All of these steroids were well separated by the addition of organic modifiers to the separation buffer. Of the organic modifiers tested, 1-propanol gave the best separation, better than methanol or acetonitrile.