Hierarchical Micro‐Mesoporous Carbon‐Framework‐Based Hybrid Nanofibres for High‐Density Capacitive Energy Storage

Advanced methods, allowing the controllable synthesis of ordered structural nanomaterials with favourable charges transfer and storage, are highly important to achieve ideal supercapacitors with high energy density. Herein, we report a microliter droplet‐based method to synthesize hierarchical‐structured metal–organic framework/graphene/carbon nanotubes hybrids. The confined ultra‐small‐volume reaction, give well‐defined hybrids with a large specific‐surface‐area (1206 m² g^?1), abundant ionic‐channels (narrow pore of 0.86 nm), and nitrogen active‐sites (10.63 %), resulting in high pore‐size utilization (97.9 %) and redox‐activity (32.3 %). We also propose a scalable microfluidic‐blow‐spinning method to consecutively generate nanofibre‐based flexible supercapacitor electrodes with striking flexibility and mechanical strength. The supercapacitors display large volumetric energy density (147.5 mWh cm^?3), high specific capacitance (472 F cm^?3) and stably deformable energy‐supply.     

From N‐Nitro to N‐Nitroamino: Preparation of High‐Performance Energetic Materials by Introducing Nitrogen‐Containing Ions

In the design of energetic materials, high energetic performance and good molecular stability are two main goals. Energetic functionalization which strives for maximum energy often results in unstable chemical bonds and causes safety problems in practical production and storage operations. In this work, N‐nitro‐ and N‐nitroamino‐functionalized mono‐ and bis(1,2,4‐triazoles) were synthesized and characterized by infrared, and multinuclear NMR spectra, and elemental analyses. The N‐nitroamino‐functionalization strategy was employed for bis(imidazole), leading to high density compound 14 (2.007 g cm^?3 at 100 K; 1.94 g cm^?3 at room temperature) and energetic salt 15 . While N‐nitro‐functionalized products are thermally unstable and highly moisture sensitive, N‐nitroamino‐functionalized energetic salts, which are comprised of additional nitrogen‐containing ions, exhibit good density, moderate to excellent structural stabilities, and high performance.     

Redox‐Polymer‐Based High‐Current‐Density Gas‐Diffusion H2‐Oxidation Bioanode Using [FeFe] Hydrogenase from Desulfovibrio desulfuricans in a Membrane‐free Biofuel Cell

The incorporation of highly active but also highly sensitive catalysts (e.g. the [FeFe] hydrogenase from Desulfovibrio desulfuricans) in biofuel cells is still one of the major challenges in sustainable energy conversion. We report the fabrication of a dual‐gas diffusion electrode H₂/O₂ biofuel cell equipped with a [FeFe] hydrogenase/redox polymer‐based high‐current‐density H₂‐oxidation bioanode. The bioanodes show benchmark current densities of around 14 mA cm^?2 and the corresponding fuel cell tests exhibit a benchmark for a hydrogenase/redox polymer‐based biofuel cell with outstanding power densities of 5.4 mW cm^?2 at 0.7 V cell voltage. Furthermore, the highly sensitive [FeFe] hydrogenase is protected against oxygen damage by the redox polymer and can function under 5 % O₂.     

Bottom‐Up Construction and Reversible Structural Transformation of Supramolecular Isomers based on Large Truncated Tetrahedra

A rational synthetic strategy to construct two supramolecular isomers based on polyoxovanadate organic polyhedra with tetrahedral symmetries is presented. VMOP‐α , a low‐temperature product, has an extremely large cell volume (470 842 ų), which is one of the top three for well‐defined MOPs. The corner‐to‐corner packing of tetrahedra leads to a quite low density of 0.174 g cm^?3 with 1D channels (ca. 5.4 nm). The effective pore volume is up to 93.6 % of cell volume, nearly the largest found in MOPs. For the high‐temperature outcome, VMOP‐β , the cell volume is only 15 513 ų. The packing mode of tetrahedra is corner‐to‐face, giving rise to a high‐density architecture (1.324 g cm^?3; channel 0.8 nm). Supramolecular structural transformation between VMOP‐α and VMOP‐β can be reversibly achieved by temperature‐induced solvent‐mediated transformation. These findings give a good opportunity for understanding 3D supramolecular aggregation and crystal growth based on large molecular tectonics.     

High‐Temperature and High‐Energy‐Density Dipolar Glass Polymers Based on Sulfonylated Poly(2,6‐dimethyl‐1,4‐phenylene oxide)

A new class of high‐temperature dipolar polymers based on sulfonylated poly(2,6‐dimethyl‐1,4‐phenylene oxide) (SO₂‐PPO) was synthesized by post‐polymer functionalization. Owing to the efficient rotation of highly polar methylsulfonyl side groups below the glass transition temperature (T_g≈220 °C), the dipolar polarization of these SO₂‐PPOs was enhanced, and thus the dielectric constant was high. Consequently, the discharge energy density reached up to 22 J cm^?3. Owing to its high T_g , the SO₂‐PPO₂₅ sample also exhibited a low dielectric loss. For example, the dissipation factor (tan δ) was 0.003, and the discharge efficiency at 800 MV m^?1 was 92 %. Therefore, these dipolar glass polymers are promising for high‐temperature, high‐energy‐density, and low‐loss electrical energy storage applications.     

Oxygen‐barrier properties of cold‐crystallized and melt‐crystallized poly(ethylene terephthalate‐co‐4,4′‐bibenzoate)

This study examined the oxygen‐transport properties of poly(ethylene terephthalate‐co‐bibenzoate) (PETBB55) crystallized from the melt (melt crystallization) or quenched to glass and subsequently isothermally crystallized by heating above the glass‐transition temperature (cold crystallization). The gauche–trans conformation of the glycol linkage was determined by infrared analysis, and the crystalline morphology was examined by atomic force microscopy. Oxygen solubility decreased linearly with volume fraction crystallinity. For melt‐crystallized PETBB55, extrapolation to zero solubility corresponded to an impermeable crystal with 100% trans glycol conformations, a density of 1.396 g cm^?3, and a heat of melting of 83 J g^?1. From the melt, PETBB55 crystallized as space‐filling spherulites with loosely organized lamellae and pronounced secondary crystallization. The morphological observations provided a structural model for permeability consisting of impermeable platelets randomly dispersed in a permeable matrix. In contrast, cold‐crystallized PETBB55 retained the granular texture of the quenched polymer despite the high level of crystallinity, as measured by the density and heat of melting. Oxygen solubility decreased linearly with volume fraction crystallinity, but zero solubility corresponded to an impermeable defective crystal with a trans fraction of 0.83 and a density of 1.381 g cm^?3. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2489–2503, 2002     

Synthesis and Properties of Azide‐Functionalized Ionic Liquids as Attractive Hypergolic Fuels

Hypergolic ionic liquids (ILs) have shown a great promise as viable replacements for toxic and volatile hydrazine derivatives used as propellant fuels, and hence, have attracted increasing interest over the last decade. To take advantage of the reactivity and high energy density of the azido group, a family of low‐cost and easily prepared azide‐functionalized cation‐based ILs, including fuel‐rich anions, such as nitrate, dicyanamide, and nitrocyanamide anions, were synthesized and characterized. All the dicyanamide‐ and nitrocyanamide‐based ILs exhibited spontaneous combustion upon contact with 100 % HNO₃. The densities of these hypergolic ILs varied in the range 1.11–1.29 g cm^?3, and the density‐specific impulse, predicted based on Gaussian 09 calculations, was between 289.9 and 344.9 s g cm^?3. The values of these two key physical properties are much higher than those of unsymmetrical dimethylhydrazine (UDMH). Among the studied compounds, compound IL‐3b, that is, 1‐(2‐azidoethyl)‐1‐methylpyrrolidin‐1‐ium dicyanamide, shows excellent integrated properties including the lowest viscosity (30.9 M Pa s), wide liquid operating range (?70 to 205 °C), shortest ignition‐delay time (7 ms) with 100 % HNO₃, and superior density specific impulse (302.5 s g cm^?3), suggesting promising applications with potential as bipropellant formulations.     

Magnetothermal Microfluidic‐Assisted Hierarchical Microfibers for Ultrahigh‐Energy‐Density Supercapacitors

Chemical architectures with an ordered porous backbone and high charge transfer are significant for fiber‐shaped supercapacitors (FSCs). However, owing to the sluggish ion kinetic diffusion and storage in compacted fibers, achieving high energy density remains a challenge. An innovative magnetothermal microfluidic method is now proposed to design hierarchical carbon polyhedrons/holey graphene (CP/HG) core–shell microfibers. Owing to highly magnetothermal etching and microfluidic reactions, the CP/HG fibers maintain an open inner‐linked ionic pathway, large specific surface area, and moderate nitrogen active site, facilitating more rapid ionic dynamic transportation and accommodation. The CP/HG FSCs show an ultrahigh energy density (335.8 μWh cm^?2) and large areal capacitance (2760 mF cm^?2). A self‐powered endurance application with the integration of chip‐based FSCs is designed to profoundly drive the durable motions of an electric car and walking robot.     

Extraordinary Supercapacitor Performance of a Multicomponent and Mixed‐Valence Oxyhydroxide

We report a novel multicomponent mixed‐valence oxyhydroxide‐based electrode synthesized by electrochemical polarization of a de‐alloyed nanoporous NiCuMn alloy. The multicomponent oxyhydroxide has a high specific capacitance larger than 627 F cm^?3 (1097±95 F g^?1) at a current density of 0.25 A cm^?3, originating from multiple redox reactions. More importantly, the oxyhydroxide electrode possesses an extraordinarily wide working‐potential window of 1.8 V in an aqueous electrolyte, which far exceeds the theoretically stable window of water. The realization of both high specific capacitance and high working‐potential windows gives rise to a high energy density, 51 mWh cm^?3, of the multicomponent oxyhydroxide‐based supercapacitor for high‐energy and high‐power applications.     

Maximum Compaction of Ionic Organic Explosives: Bis(hydroxylammonium) 5,5′‐Dinitromethyl‐3,3′‐bis(1,2,4‐oxadiazolate) and its Derivatives

Within this contribution on bis(oxadiazoles) we report on bis‐hydroxylammonium 5,5′‐dinitro‐methyl‐3,3′‐bis(1,2,4‐oxadiazolate), which (to the best of our knowledge) shows the highest density (2.00 g cm^?3 at 92 K, 1.95 g cm^?3 at RT) ever reported for an ionic CHNO explosive. Also the corresponding bis(ammonium) salt shows an outstanding density of 1.95 g cm^?3 (173 K). The reaction of the 3,3′‐bis(1,2,4‐oxadiazolyl)‐5,5′‐bis(2,2′‐dinitro)‐diacetic acid diethyl ester with different nitrogen‐rich bases, such as ammonia, hydrazine, hydroxylamine, and triaminoguanidine causes decarboxylation followed by the formation of the corresponding salts (cation/anion stoichiometry 2:1). The reactions are performed at ambient temperature in H₂O/MeOH mixtures and furnish qualitatively pure products showing characteristics of typical secondary explosives. The obtained compounds were characterized by multinuclear NMR spectroscopy, IR and Raman spectroscopy, as well as mass spectrometry. Single‐crystal X‐ray diffraction studies were performed and the structures of all compounds were determined at low temperatures. The thermal stability was measured by differential scanning calorimetry (DSC). The sensitivities were explored by using the BAM drophammer and friction test. The heats of formation were calculated by the atomization method based on CBS‐4M enthalpies. With these values and the X‐ray densities, several detonation parameters such as the detonation pressure, velocity, energy, and temperature were computed using the EXPLO5 code.     

Two‐Dimensional Conjugated Aromatic Networks as High‐Site‐Density and Single‐Atom Electrocatalysts for the Oxygen Reduction Reaction

Two‐dimensional conjugated aromatic networks (CAN) with ultra‐thin conjugated layers (ca. 3.5 nm) and high single‐metal‐atom‐site density (mass content of 10.7 wt %, and 0.73 metal atoms per nm²) are prepared via a facile pyrolysis‐free route involving a one‐step ball milling of the solid‐phase‐synthesized polyphthalocyanine. These materials display outstanding oxygen reduction reaction (ORR) mass activity of 47 mA mg_cat.^?1 represents 1.3‐ and 6.4‐fold enhancements compared to Pt and Pt/C in benchmark Pt/C, respectively. Moreover, the primary Zn‐air batteries constructed with CAN as an air electrode demonstrate a mass/volume power density of 880 W g_cat.^?1/615 W cm_cat.^?3 and stable long‐term operation for 100 h. This strategy offers a new way to design high‐performance electrocatalysts with atomic precision for use in other energy‐storage and conversion applications.     

Free‐Standing Conducting Polymer Films for High‐Performance Energy Devices

Thick, uniform, easily processed, highly conductive polymer films are desirable as electrodes for solar cells as well as polymer capacitors. Here, a novel scalable strategy is developed to prepare highly conductive thick poly(3,4‐ethylenedioxythiophene):polystyrene sulfonate (HCT‐PEDOT:PSS) films with layered structure that display a conductivity of 1400 S cm^?1 and a low sheet resistance of 0.59 ohm sq^?1. Organic solar cells with laminated HCT‐PEDOT:PSS exhibit a performance comparable to the reference devices with vacuum‐deposited Ag top electrodes. More importantly, the HCT‐PEDOT:PSS film delivers a specific capacitance of 120 F g^?1 at a current density of 0.4 A g^?1. All‐solid‐state flexible symmetric supercapacitors with the HCT‐PEDOT:PSS films display a high volumetric energy density of 6.80 mWh cm^?3 at a power density of 100 mW cm^?3 and 3.15 mWh cm^?3 at a very high power density of 16160 mW cm^?3 that outperforms previous reported solid‐state supercapacitors based on PEDOT materials.     

Polarization‐Driven Self‐Powered Photodetection in a Single‐Phase Biaxial Hybrid Perovskite Ferroelectric

Self‐powered photodetection driven by ferroelectric polarization has shown great potential in next‐generation optoelectronic devices. Hybrid perovskite ferroelectrics that combine polarization and semiconducting properties have a promising position within this portfolio. Herein, we demonstrate the realization of self‐powered photodetection in a new developed biaxial ferroelectric, (EA)₂(MA)₂Pb₃Br₁₀ ( 1 , EA is ethylammonium and MA is methylammonium), which displays high Curie temperature (375 K), superior spontaneous polarization (3.7 μC cm^?2), and unique semiconducting nature. Strikingly, without an external energy supply, 1 exhibits an direction‐selectable photocurrent with fascinating attributes including high photocurrent density (≈4.1 μA cm^?2), high on/off switching ratio (over 10⁶), and ultrafast response time (96/123 μs); such merits are superior to those of the most active ferroelectric oxide BiFeO₃. Further studies reveal that strong inversion symmetry breaking in 1 provides a desirable driving force for carrier separation, accounting for such electrically tunable self‐powered photoactive behaviors. This work sheds light on exploring new multifunctional hybrid perovskites and advancing the design of intelligent photoelectric devices.     

Graphitic Carbon Nitride (g‐C3N4): An Interface Enabler for Solid‐State Lithium Metal Batteries

Solid‐state Li metal batteries (SSLMBs) have attracted considerable interests due to their promising energy density as well as high safety. However, the realization of a well‐matched Li metal/solid‐state electrolyte (SSE) interface remains challenging. Herein, we report g‐C₃N₄ as a new interface enabler. We discover that introducing g‐C₃N₄ into Li metal can not only convert the Li metal/garnet‐type SSE interface from point contact to intimate contact but also greatly enhance the capability to suppress the dendritic Li formation because of the greatly enhanced viscosity, decreased surface tension of molten Li, and the in situ formation of Li₃N at the interface. Thus, the resulting Li‐C₃N₄|SSE|Li‐C₃N₄ symmetric cell gives a significantly low interfacial resistance of 11 Ω cm² and a high critical current density (CCD) of 1500 μA cm^?2. In contrast, the same symmetric cell configuration with pristine Li metal electrodes has a much larger interfacial resistance (428 Ω cm²) and a much lower CCD (50 μA cm^?2).     

Oxygen‐barrier properties of oriented and heat‐set poly(ethylene terephthalate)

The improvement in the oxygen‐barrier properties of poly(ethylene terephthalate) (PET) by orientation and heat setting was examined. Orientation was carried out at 65 °C by constrained uniaxial stretching to a draw ratio of about 4. Heat setting was performed at temperatures from 90 to 160 °C with the specimen taut. Orientation decreased the permeability of PET to almost one‐third that of the unoriented, amorphous polymer because of decreases in both the diffusion coefficient and the solubility coefficient. The proposed two‐phase model for oriented PET consisted of a permeable isotropic amorphous phase (density = 1.335 g/cm³) with ethylene linkages predominately in the gauche conformation and an impermeable oriented phase (density = 1.38 g/cm³) with ethylene linkages that had transformed from the gauche conformation to the trans conformation during stretching. Chain segments in the trans conformation did not possess crystalline order; instead, they were viewed as forming an ordered amorphous phase. Crystallization by heat setting above the glass‐transition temperature did not dramatically affect the permeability. However, a decrease in the diffusion coefficient, offset by an increase in the solubility coefficient, indicated that crystallization affected the barrier properties of the permeable amorphous phase. Analysis of the barrier data, assuming a two‐phase model with variable density for both the permeable and impermeable phases, revealed that the impermeable phase density increased during crystallization, approaching a value of 1.476 g/cm³. This value is consistent with previous measurements of the density of the defective crystalline phase in PET. The density of the permeable amorphous phase decreased concurrently to about 1.325 g/cm³, indicating the appearance of additional free volume. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 1679–1686, 2000     

Ferromagnetic Interactions in a 1D Alternating Linear Chain of π‐Stacked 1,3‐Diphenyl‐7‐(thien‐2‐yl)‐1,4‐dihydro‐1,2,4‐benzotriazin‐4‐yl Radicals

X‐ray studies show that 1,3‐diphenyl‐7‐(thien‐2‐yl)‐1,4‐dihydro‐1,2,4‐benzotriazin‐4‐yl ( 6 ) adopts a distorted, slipped π‐stacked structure of centrosymmetric dimers with alternate short and long interplanar distances (3.48 and 3.52 Å). Cyclic voltammograms of 7‐(thien‐2‐yl)benzotriazin‐4‐yl 6 show two fully reversible waves that correspond to the ?1/0 and 0/+1 processes. EPR and DFT studies on radical 6 indicate that the spin density is mainly delocalized over the triazinyl fragment. Magnetic susceptibility measurements show that radical 6 obeys Curie–Weiss behavior in the 5–300 K region with C=0.378 emu K mol^?1 and θ=+4.72 K, which is consistent with ferromagnetic interactions between S=1/2 radicals. Fitting the magnetic susceptibility revealed the behavior is consistent with an alternating ferromagnetic chain (g=2.0071, J₁=+7.12 cm^?1, J₂=+1.28 cm^?1).     

MoB/g‐C3N4 Interface Materials as a Schottky Catalyst to Boost Hydrogen Evolution

Proton adsorption on metallic catalysts is a prerequisite for efficient hydrogen evolution reaction (HER). However, tuning proton adsorption without perturbing metallicity remains a challenge. A Schottky catalyst based on metal–semiconductor junction principles is presented. With metallic MoB, the introduction of n‐type semiconductive g‐C₃N₄ induces a vigorous charge transfer across the MoB/g‐C₃N₄ Schottky junction, and increases the local electron density in MoB surface, confirmed by multiple spectroscopic techniques. This Schottky catalyst exhibits a superior HER activity with a low Tafel slope of 46 mV dec^?1 and a high exchange current density of 17 μA cm^?2, which is far better than that of pristine MoB. First‐principle calculations reveal that the Schottky contact dramatically lowers the kinetic barriers of both proton adsorption and reduction coordinates, therefore benefiting surface hydrogen generation.     

Maximization of Spatial Charge Density: An Approach to Ultrahigh Energy Density of Capacitive Charge Storage

Capacitive energy storage has advantages of high power density, long lifespan, and good safety, but is restricted by low energy density. Inspired by the charge storage mechanism of batteries, a spatial charge density (SCD) maximization strategy is developed to compensate this shortage by densely and neatly packing ionic charges in capacitive materials. A record high SCD (ca. 550 C cm^?3) was achieved by balancing the valance and size of charge‐carrier ions and matching the ion sizes with the pore structure of electrode materials, nearly five times higher than those of conventional ones (ca. 120 C cm^?3). The maximization of SCD was confirmed by Monte Carlo calculations, molecular dynamics simulations, and in situ electrochemical Raman spectroscopy. A full‐cell supercapacitor was further constructed; it delivers an ultrahigh energy density of 165 Wh L^?1 at a power density of 150 WL^?1 and retains 120 Wh L^?1 even at 36 kW L^?1, opening a pathway towards high‐energy‐density capacitive energy storage.     

Catholyte‐Free Electrocatalytic CO2 Reduction to Formate

Electrochemical reduction of carbon dioxide (CO₂) into value‐added chemicals is a promising strategy to reduce CO₂ emission and mitigate climate change. One of the most serious problems in electrocatalytic CO₂ reduction (CO₂R) is the low solubility of CO₂ in an aqueous electrolyte, which significantly limits the cathodic reaction rate. This paper proposes a facile method of catholyte‐free electrocatalytic CO₂ reduction to avoid the solubility limitation using commercial tin nanoparticles as a cathode catalyst. Interestingly, as the reaction temperature rises from 303 K to 363 K, the partial current density (PCD) of formate improves more than two times with 52.9 mA cm^?2, despite the decrease in CO₂ solubility. Furthermore, a significantly high formate concentration of 41.5 g L^?1 is obtained as a one‐path product at 343 K with high PCD (51.7 mA cm^?2) and high Faradaic efficiency (93.3 %) via continuous operation in a full flow cell at a low cell voltage of 2.2 V.     

Polynitro‐Functionalized Dipyrazolo‐1,3,5‐triazinanes: Energetic Polycyclization toward High Density and Excellent Molecular Stability

A new fused N‐heterocyclic framework, dipyrazolo‐1,3,5‐triazinane, was synthesized and the physiochemical properties of its derivatives were investigated to evaluate the integrated energetic performance. In contrast to 1,3,5‐trinitro‐1,3,5‐triazinane (RDX) featuring a distorted chair confirmation, polynitro‐functionalized dipyrazolo‐1,3,5‐triazinanes have nearly planar backbones, thereby enhancing the density and thermal stability. Among these new energetic tricyclic compounds, 5 a and 12 show favorable crystal densities of 1.937 g cm⁻³ and 1.990 g cm⁻³ at 150 K, respectively, which rank highest in triazinane‐based energetic compounds. Additionally, this synthetic approach was carried out to form seven‐membered and eight‐membered rings, giving rise to tetranitro dipyrazolo‐1,3,5‐triazepane ( 5 b ) and tetranitro dipyrazolo‐1,3,5‐triazocane ( 5 c ), respectively.