Immobilization of enzymes on a microchannel surface through cross-linking polymerization

A novel and facile method for the preparation of an enzyme-immobilized microreactor has been developed in which enzymes are immobilized as an enzyme-polymer membrane formed on the inner wall of the microchannel by a cross-linking polymerization method; the resulting microreactor shows excellent reaction performance and stability against denaturating agents.     

The effects of cross-linking and anodic surface roughening on quinone polymer/carbon electrodes

A polymer in which anthraquinone-2-carbonyl groups were bound to polyethyleneimine was coated onto a glassy carbon electrode. Electrodes of this kind were studied using cyclic voltammetry and pH 7 aqueous solutions. At pH <10 only those quinone units in contact with the carbon surface are electroactive. It was shown that anodic surface roughening increased the limited number of electroactive groups in the polymer film and gave more stable activity and narrower voltammetric peaks. Above pH 10 redox propagation through the layer is more rapid but the anionic product desorbs. This desorption was inhibited by cathodically cross-linking a layer of mixed polymers on a polyethyleneimine backboned polymer containing fluorenone units as well as anthraquinone units.     

Enhanced stability of Janus nanoparticles by covalent cross-linking of surface ligands

A mercapto derivative of diacetylene was used as the hydrophilic ligand to prepare Janus nanoparticles by using hydrophobic hexanethiolate-protected gold (AuC6, diameter 5 nm) nanoparticles as the starting materials. The amphiphilic surface characters of the Janus nanoparticles were verified by contact angle measurements, as compared to those of the bulk-exchange counterparts where the two types of ligands were distributed rather homogeneously on the nanoparticle surface. Dynamic light scattering studies showed that the Janus nanoparticles formed stable superstructures in various solvent media that were significantly larger than those by the bulk-exchange counterparts. This was ascribed to the amphiphilic characters of the Janus nanoparticles that rendered the particles to behave analogously to conventional surfactant molecules. Notably, because of the close proximity of the diacetylene moieties on the Janus nanoparticle surface, exposure to UV irradiation led to effective covalent cross-linking between the diacetylene moieties of neighboring ligands, as manifested in UV-vis and fluorescence measurements where the emission characteristics of dimers and trimers of diacetylene were rather well-defined, in addition to the monomeric emission. In contrast, for bulk-exchange nanoparticles, no trimer emission could be identified, and the intensity of dimer emission was markedly lower (though the intensity increased with increasing diacetylene coverage on the particle surface) under the otherwise identical experimental conditions. This is largely because the diacetylene ligands were distributed on the entire particle surface, and it was difficult to find a large number of ligands situated closely so that the stringent topochemical principles for the polymerization of diacetylene derivatives could be met. Importantly, the cross-linked Janus nanoparticles were found to exhibit marked enhancement of the structural integrity, which was attributable to the impeded surface diffusion of the thiol ligands on the nanoparticle surface, as manifested in fluorescence measurements of aged nanoparticles.     

Free-radical cross-linking of serum albumin molecules on the surface of magnetite nanoparticles in aqueous dispersion

A novel universal approach to cross-linking of protein macromolecules on the surface of magnetite nanoparticles has been developed. The approach is based on protein liability to free-radical modification, leading to the formation of intermolecular covalent cross-links. Free radicals are locally generated on the surface of nanoparticles. Stable coatings of serum albumin 3 nm thick are formed on the surface of magnetite nanoparticles. Using a set of physicochemical methods, it has been proven that stable coatings composed of protein macromolecules are formed around individual nanoparticles. The presence of reactive groups in the protein structure makes it possible to perform subsequent modification of the surface layers-in particular, to graft nonprotein drugs. The approach developed can be used to create superfine systems with desired surface properties for targeted delivery of drugs and biologically active substances.     

A novel electrochemical method to detect cell surface carbohydrates and target cells

Glycosylation of cell surfaces is a critical factor in many biological processes; however, the lack of effective analytical tools for the detection of cell surface carbohydrates has been the bottleneck for probing into the processes. In this paper, a novel electrochemical method is presented for the analysis of cell surface carbohydrates, which can be also used to detect the target cells. Firstly, 5-hydroxy-3-hexanedithiol-1,4-naphthoquinone (JUG_thio), the electrochemical reporter, and anti-selectin aptamer are successively modified onto the surface of a gold electrode. Different concentrations of intestinal human colon adenocarcinoma (LS180) cells are employed as the target cells for this study. Consequently, the specific carbohydrates on the surfaces of LS180 cells and anti-selectin aptamers will compete for combination with selectin in the system. As a result, the oxidation signal of JUG_thio is changed and the detection of the cell surface carbohydrates can be achieved easily and sensitively. Furthermore, the proposed method can be used to specifically detect LS180 cells in a wide concentration range, from 10³ to 10⁷ cells/mL, with a good linear relationship and low detection limit, which might be promising for the diagnosis of cancer and some other diseases in the future.     

Simulation of proliferation of neural stem cells on a surface with emphasis on spatial constraints on cell division

We present Monte Carlo lattice simulations of proliferation of cells on a surface in the situation when the cell-cell adhesion is relatively strong and the cells may form islands and/or flattened hemispheres. The model parameters were chosen to mimic proliferation of adult rat neural stem cells (or, more specifically, adult hippocampal progenitor cells) deposited on polyornithine and laminin coated polystyrene. The results obtained show that the spatial constraints on cell division may result in slowdown of the exponential growth. Depending on the rules used for cell division, this effect may be either nearly negligible or appreciable. In the latter case, the scale of the deviations from the exponential growth is comparable with that observed in our experiments. In the simulations, the slowdown of the growth starts however somewhat earlier and occurs in a less abrupt manner. This seems to indicate that the spatial constraints on division of cells are not the main factor behind the experimentally observed termination of the growth.     

Investigating the relationship between cell cycle stage and diosgenin-induced megakaryocytic differentiation of HEL cells using sedimentation field-flow fractionation

Differentiation therapy could be one strategy for stopping cancer cell proliferation. A plant steroid, diosgenin, is known to induce megakaryocytic differentiation in human erythroleukemia (HEL) cells. In recent studies, the use of sedimentation field-flow fractionation (SdFFF) allowed the preparation of subpopulations that may differ in regard to sensitivity to differentiation induction. The specific goal of this study was to determine the relationship between cell cycle stage and sensitivity to megakaryocytic differentiation induction of HEL cells. After first confirming the capacity of diosgenin to specifically select targets, hyperlayer SdFFF cell sorting was used to prepare fractions according to cell cycle position from crude HEL cells. The sensitivities of these fractions to diosgenin-induced differentiation were then tested. The coupling of SdFFF cell separation to imaging flow cytometry showed that G1-phase cells were more sensitive to differentiation induction than S/G2M-phase cells, confirming the relationship between cell status at the start of induction, the extent of the biological event, and the potential of SdFFF in cancer research.     

Glycan–protein cross-linking mass spectrometry reveals sialic acid-mediated protein networks on cell surfaces

A cross-linking method is developed to elucidate glycan-mediated interactions between membrane proteins through sialic acids. The method provides information on previously unknown extensive glycomic interactions on cell membranes. The vast majority of membrane proteins are glycosylated with complicated glycan structures attached to the polypeptide backbone. Glycan–protein interactions are fundamental elements in many cellular events. Although significant advances have been made to identify protein–protein interactions in living cells, only modest advances have been made on glycan–protein interactions. Mechanistic elucidation of glycan–protein interactions has thus far remained elusive. Therefore, we developed a cross-linking mass spectrometry (XL-MS) workflow to directly identify glycan–protein interactions on the cell membrane using liquid chromatography-mass spectrometry (LC-MS). This method involved incorporating azido groups on cell surface glycans through biosynthetic pathways, followed by treatment of cell cultures with a synthesized reagent, N-hydroxysuccinimide (NHS)–cyclooctyne, which allowed the cross-linking of the sialic acid azides on glycans with primary amines on polypeptide backbones. The coupled peptide–glycan–peptide pairs after cross-linking were identified using the latest techniques in glycoproteomic and glycomic analyses and bioinformatics software. With this approach, information on the site of glycosylation, the glycoform, the source protein, and the target protein of the cross-linked pair were obtained. Glycoprotein–protein interactions involving unique glycoforms on the PNT2 cell surface were identified using the optimized and validated method. We built the GPX network of the PNT2 cell line and further investigated the biological roles of different glycan structures within protein complexes. Furthermore, we were able to build glycoprotein–protein complex models for previously unexplored interactions. The method will advance our future understanding of the roles of glycans in protein complexes on the cell surface.

The cell surface glycocalyx is highly interactive defined by extensive covalent and non-covalent interactions. A method for cross-linking and characterizing glycan–peptide interactions in situ is developed.     

Photovoltaic performance of dye-sensitized solar cells assembled by in-situ chemical cross-linking

Quasi-solid state dye-sensitized solar cells (DSSCs) were assembled by in-situ chemical cross-linking of a gel electrolyte precursor containing liquid electrolyte. The DSSCs assembled with this cross-linked gel polymer electrolyte showed higher open circuit voltage and lower short-circuit photocurrent density than those of DSSCs with liquid electrolyte. Addition of SiO₂ nanoparticles into the cross-linked gel polymer electrolyte significantly improved the photovoltaic performance and long-term stability of the DSSCs. The optimized quasi-solid state DSSC showed high conversion efficiency, 6.2% at 100 mW cm^?2 with good durability.     

Facile cell patterning on an albumin-coated surface

Fabrication of micropatterned surfaces to organize and control cell adhesion and proliferation is an indispensable technique for cell-based technologies. Although several successful strategies for creating cellular micropatterns on substrates have been demonstrated, a complex multistep process and requirements for special and expensive equipment or materials limit their prevalence as a general experimental tool. To circumvent these problems, we describe here a novel facile fabrication method for a micropatterned surface for cell patterning by utilizing the UV-induced conversion of the cell adhesive property of albumin, which is the most abundant protein in blood plasma. An albumin-coated surface was prepared by cross-linking albumin with ethylene glycol diglycidyl ether and subsequent casting of the cross-linked albumin solution on the cell culture dish. While cells did not attach to the albumin surface prepared in this way, UV exposure renders the surface cell-adhesive. Thus, surface micropatterning was achieved simply by exposing the albumin-coated surface to UV light through a mask with the desired pattern. Mouse fibroblast L929 cells were inoculated on the patterned albumin substrates, and cells attached and spread in a highly selective manner according to the UV-irradiated pattern. Although detailed investigation of the molecular-level mechanism concerning the change in cell adhesiveness of the albumin-coated surface is required, the present results would give a novel facile method for the fabrication of cell micropatterned surfaces.     

Quasi-solid-state dye-sensitized solar cells assembled by in-situ chemical cross-linking at ambient temperature

Cross-linked gel polymer electrolytes containing aluminum oxide nanoparticles are successfully prepared using in-situ chemical cross-linking at room temperature after injection of the gel precursor into a dye-sensitized solar cell (DSSC). This makes it possible to directly solidify the electrolyte in the cell without leakage of solvent and to maintain close interfacial contact with the porous TiO₂ electrode. The quasi-solid-state DSSC assembled with gel polymer electrolyte containing 20 wt.% Al₂O₃ particles yields an overall conversion efficiency of 5.25% under AM 1.5 illumination at 100 mW cm^{− 2}.     

Investigating the surface properties of Escherichia coli under glucose controlled conditions and its effect on aggregation

Bacteria exist as aggregates or in biofilms to help with adaptation and protection from environmental stresses. The hypothesis that is tested in this paper is that the relative presence of glucose in the media, at the beginning of the growth phase, influences the surface chemistry of the cell, which as a consequence reduces the tendency for the cells to interact and form aggregates. In this study, we used Escherichia coli (E. coli) MG1655 as a model organism and measured the change in the surface chemistry of cells harvested at different growth phases, which had been cultured in Luria-Bertani media with and without the addition of glucose, using potentiometric titration and infrared spectroscopy. Cells, cultivated with the additional supplement of glucose at the beginning of the growth phase, displayed a higher concentration of bacterial surface functional groups and a variation in outer membrane proteins. As a consequence, the tendency for cell-to-cell attachment was significantly reduced. Our findings therefore revealed that glucose limits aggregation in E. coli MG1655 by altering the concentration of functional groups from macromolecules present on the bacterial surface.     

Profiling and semiquantitative analysis of the cell surface proteome in human mesenchymal stem cells

Mulitpotent mesenchymal stem cells (MSCs) derived from human bone marrow are promising candidates for the development of cell therapeutic strategies. MSC surface protein profiles provide novel biological knowledge concerning the proliferation and differentiation of these cells, including the potential for identifying therapeutic targets. Basic fibroblast growth factor (bFGF) affects cell surface proteins, which are associated with increased growth rate, differentiation potential, as well as morphological changes of MSCs in vitro. Cell surface proteins were isolated using a biotinylation-mediated method and identified using a combination of one-dimensional sodium dodecyl sulfate–polyacrylamide gel electrophoresis and mass spectrometry. The resulting gel lines were cut into 20 bands and digested with trypsin. Each tryptic fragment was analyzed by liquid chromatography–electrospray ionization tandem mass spectrometry. Proteins were identified using the Mascot search program and the International Protein Index human database. Noble MSC surface proteins (n?=?1,001) were identified from cells cultured either with (n?=?857) or without (n?=?667) bFGF-containing medium in three independent experiments. The proteins were classified using FatiGO to elucidate their function. We also confirmed the proteomics results using Western blotting and immunofluorescence microscopic analysis. The nature of the proteins identified makes it clear that MSCs express a wide variety of signaling molecules, including those related to cell differentiation. Among the latter proteins, four Ras-related Rab proteins, laminin-R, and three 14-3-3 proteins that were fractionated from MSCs cultured on bFGF-containing medium are implicated in bFGF-induced signal transduction of MSCs. Consequently, these finding provide insight into the understanding of the surface proteome of human MSCs.

Kinetic adhesion of bacterial cells to sand: cell surface properties and adhesion rate

Correlation between microbial surface thermodynamics using the extended DLVO (XDLVO) theory and kinetic adhesion of various bacterial cells to sand was investigated. Two experimental setups were utilized. Adhesion tests were conducted in batch reactors with slow agitation. Also, bacteria were circulated through small sand columns in a closed loop and the results were analyzed with a simple model which accounted for the rate of the adhesion phenomena (omega in h(-1)) and adhesion percentage. Cells surface properties were derived from contact angle measurements. The wicking method was utilized to characterize the sand. Zeta potentials were measured for the sand and the cells. Kinetic of bacterial retention by the porous media was largely influenced by the electrostatic interactions which are correlated with omega from the model (R(2)=0.71). Negative zeta potentials resulted in electrostatic repulsions occurring between the sand and the bacterial cells which in result delayed bacterial adhesion. While no correlation was found between the adhesion percentage and the total interaction energy calculated with the XDLVO theory the respective behavior of hydrophobic and hydrophilic bacteria as well as the importance of electrostatic interactions was evidenced. All the bacterial strains studied adhered more in the column experiments than in the adhesion tests, presumably due to enhanced collision efficiency and wedging in porous media, while filtration could be ignored except for the larger Bacillus strains. Approximate XDLVO calculations due to solid surface nanoscale roughness, retention in a secondary minimum and population heterogeneity are discussed. Our results obtained with a large variety of different physicochemical bacterial strains highlights the influence of both surface thermodynamics and porous media related effects as well as the limits of using the XDLVO theory for evaluating bacterial retention through porous media.     

Synthetic mimics of mammalian cell surface receptors: prosthetic molecules that augment living cells

Specific receptors on the surface of mammalian cells actively internalize cell-impermeable ligands by receptor-mediated endocytosis. To mimic these internalizing receptors, my laboratory is studying artificial cell surface receptors that comprise N-alkyl derivatives of 3beta-cholesterylamine linked to motifs that bind cell-impermeable ligands. When added to living mammalian cells, these synthetic receptors insert into cellular plasma membranes, project ligand-binding small molecules or peptides from the cell surface, and enable living cells to internalize targeted proteins and other cell-impermeable compounds. These artificial receptors mimic their natural counterparts by rapidly cycling between plasma membranes and intracellular endosomes, associating with proposed cholesterol and sphingolipid-rich lipid raft membrane microdomains, and delivering ligands to late endosomes/lysosomes. This "synthetic receptor targeting" strategy is briefly reviewed here and contrasted with other related cellular delivery systems. Potential applications of artificial cell surface receptors as molecular probes, agents for cellular targeting, tools for drug delivery, and methods for ligand depletion are discussed. The construction of synthetic receptors as prosthetic molecules, designed to seamlessly augment the molecular machinery of living cells, represents an exciting new frontier in the fields of bioorganic chemistry and chemical biology.     

Human placental cell surface antigens:expression by cultured cells of diverse phenotypic origin

The present work examined the expression of cell surface glycoprotein antigens in cultured human cell lines. The set of glycoproteins studied was defined by their immunoreactivity with antiserum developed to Triton-solubilized extracts of placental brush border membranes. Studies were performed using cell lines of trophoblastic (BeWo, JEG-3) and nontrophoblastic (Chang liver cells) origin, as well as diploid fibroblast cell lines (WI-38, GM-38). Antiplacental brush border antiserum reacts with at least 19 distinct antigens present in placental membrane preparations, each of which can be resolved and identified in two-dimensional electrophoresis. The subunit molecular weight and isoelectric point for all components were defined by their positions in the two-dimensional matrix. Thirteen of these could be detected among the five cell lines examined by lactoperoxidase-catalyzed cell surface iodination. One of these 13 antigens has been identified as the placental isoenzyme of alkaline phosphatase (PAP). The expression of this component is limited to choriocarcinoma cells and Chang liver cells and it is not present in diploid fibroblasts. Under normal circumstances expression of PAP is unique to the differentiated placenta but has been frequently demonstrated in both trophoblastic and nontrophoblastic neoplasms. Two other antigens are variably expressed among the different cell types examined in the present study and their presence or absence was independent of the trophoblastic, epithelial nontrophoblastic, or fibroblastic origin of the cells. Ten surface antigens were expressed in all five cell lines. Six of these had previously been found common to membranes from three adult differentiated tissues, including liver and kidney, as well as placenta (Wada et al, J Supramol Struc 10(3): 287-305, 1979). The presence of this set of antigens in cultured cells as well extends the possibility that these are ubiquitously expressed on human cell surfaces. Two other antigens observed in all cultured cells had been found in both placental and either kidney or liver membranes and may represent common functions shared by many tissues which are also necessary for growth in vitro. The two remaining placental antigens seen in all cultured cells have previously been shown to be absent in adult tissues. Their presence in cultured cells but not in the membranes of resting differentiated tissues may signify the expression of glycoproteins characteristic of trophoblasts in all cells adapted to growth in culture.