Excess Molar Volume of Binary Mixtures of Methylheptenone+Alkanols at 298.15 K

IntroductionMethylheptenone(CA Registry No. 1 1 0 - 93 -0 ) ,6 - methyl- 5 - hepten- 2 - one,one of theintermediates of isomethpetene synthesis,is atransparent liquid with a strong odor.A survey ofthe literatures shows that there are very fewreports upon the density measurements on thebinary mixtures of MHO and one of alkanols. Tounderstand the nature of MHO and the molecularinteractions between the components of the mixturefurther,the experimental determination on VE isindispensable.The …     

Excess Molar Polarization in Binary Mixtures of Polar Liquids

Abstract

Excess Molar Polarizations (ΔP _W.Q., ΔP _D.D.) have been evaluated in the binary mixture of associated + associated and associated + nonassociated polar liquids using Winkelmann-Quitzsch and Davis-Douheret equations. It is observed that Winkelmann-Quitzsch equation ΔP _W.Q. is the more appropriate one for interpretation of dynamic characteristics of the molecular association in a liquid mixture.     

Temperature Dependence of Excess Molar Volumes of Ethanol + Water + Ethyl Acetate

In order to design and optimize equipment needed for production of distilled alcoholic beverages, an adequate knowledge of their physical properties and phase equilibria is necessary. The key thermodynamic information needed is for those chemicals that are the main components in terms of nonideal behavior. In this paper we present the temperature dependence of the excess molar volumes of the ternary system ethanol + water + ethyl acetate in the range 288.15–323.15 K at atmospheric pressure, due to the importance of ethyl acetate among the flavor compounds contained in this type of beverage. The observed excess molar volumes are usually negative over the whole homogeneous composition range, but take on positive values as the binary ethanol + ethyl acetate system is approached and the liquid phase separation region is observed. Because the current process designs are strongly computer oriented, the accuracy of theoretical model predictions was examined. The experimental data were used to test the capability of the Soave–Redlich–Kwong (SRK) equation of state to predict the ternary mixture behavior from binary mixture interaction parameters, which were obtained from previously published data. Derived properties, such as partial the excess molar volumes, excess isobaric expansibility, and the pressure derivative of excess molar enthalpy at constant temperature were calculated, due to their importance in the study of specific molecular interactions.     

Effect of Structure on Excess Partial Volumes and Deviation in Molar Viscosity of Some Aqueous-Ethylene Glycols Mono Alkyl Ether

The data obtained for density, viscosity, and dielectric constant are used for the study of the physical properties of 2-ethoxy ethanol-water mixtures. Density measurements showed the presence of contraction in the volume of the mixture and also in the partial molal volume of the components. Viscosity data provided supporting evidence of interaction between the two solvents. The dielectric data for the system were studied in terms of a deviation fraction, δD, representing the deviation from an ideal volume mixture. The results are also compared with the data obtained in the literature for water-2-methoxy ethanol and water-ethylene glycol mixtures.     

Excess Molar Volumes,Viscosity Deviations and Isentropic Compressibility of Binary Mixtures Containing 1,3-Dioxolane and Monoalcohols at 303.15 K

The excess molar volume (V ^E), viscosity deviations (Δη) and Gibbs excess energy of activation for viscous flow (G^∗E) have been investigated from density (ρ) and viscosity (η) measurements of eight binary mixtures of 1,3-dioxolane with methanol, ethanol, 1-propanol, 2-propanol, 1-butanol, 2-butanol, t-butanol, and i-amyl alcohol over the entire range of mole fractions at 303.15 K. The viscosity data have been correlated with the Grunberg and Nissan equation. Furthermore, excess isentropic compressibilities (K_S^E) have been calculated from ultrasonic speed measurements of these binary mixtures at 303.15 K. The deviations have been fitted by a Redlich–Kister equation and the results are discussed in terms of molecular interactions and structural effects. The excess properties are found to be either negative or positive depending on the molecular interactions and the nature of the liquid mixtures. The systems studied exhibit very strong cross association through hydrogen bonding.     

Interpretation of the Excess Molar Volumes and Excess Molar Compressions of Pentan-1-ol + Octan-1-ol Mixtures on the Basis of the Homomorph Concept

The densities and speeds of sound in pentan-1-ol + octan-1-ol, pentan-1-ol + nonane and hexane + nonane binary systems have been measured over the whole composition range from 293.15 to 313.15 K. For comparison, literature data for the hexane + octan-1-ol mixture have also been analyzed. The quantities determined have been plotted as functions of temperature and composition. The excess molar volumes and excess molar compressions have been interpeted on the basis of the homomorph concept.     

Excess Molar Volumes of Binary Mixtures of Propyl Ethanoate with some n-Alkanes at 298.15 K and 308.15 K

Abstract

Excess molar volumes v^E have been measured for the binary liquid mixtures of propyl ethanoate with five n-alkanes (n-hexane, n-heptane, n-octane, n-nonane and n-decane) at 298.15 and 308.15 K, using an Anton Paar densimeter. All the mixtures studied present positive v^E values that increase with the length of the chain of the alkane and with the temperature. The experimental results are compared with the predictions of the Nitta—Chao model.     

Densities and Excess Molar Volumes of Binary and Ternary Mixtures of Aqueous Solutions of 2,2,2-Trifluoroethanol with Acetone and Alcohols at the Temperature of 298.15 K and Pressure of 101 kPa

Excess molar volumes V_m^E of the binary mixtures of (trifluoroethanol + 1-propanol), (trifluoroethanol + 2-propanol), (acetone + water), (methanol + water), (ethanol + water), (1-propanol + water), (2-propanol + water), and the ternary mixtures of (trifluoroethanol + methanol + water), (trifluoroethanol + ethanol + water), (trifluoroethanol~+ 1-propanol + water), (trifluoroethanol + 2-propanol + water) and (trifluoroethanol + acetone + water) were measured with a vibrating tube densimeter at the temperature of 298.15 K and the pressure 101 kPa. The extrema in V_m^E of trifluoroethanol mixtures occur at –0.690 cm³-mol^–1 for (trifluoroethanol + 1-propanol), at –0.990~cm³-mol^–1 for (trifluoroethanol + 2-propanol); at 0.562 and –0.973 cm³-mol^–1 for (trifluoroethanol + methanol + water), at 0.629 and –0.973 cm³-mol^–1 for (trifluoroethanol + ethanol + water), at 1.082 and –0.659 cm³-mol^–1 for (trifluoroethanol~+ 1-propanol + water), at 0.998 and –0.991 cm³-mol^–1 for (trifluoroethanol~+ 2-propanol + water), and at 0.515 and –1.472 cm³-mol^–1 for (trifluoroethanol + acetone + water). The experimental ternary V_m^E values were predicted by empirical expressions using binary solution data.     

Studies on Lattice Parameter,Molar Volume and Excess Molar Volume of Pb-based a-phase Solid Solution in Pb-Sn-Cd Ternary System

The lattice parameters a and the molar volumes Km of Pb-based a-phase solid solutions in the Pb-Sn-Cd ternary system were determined by means of X-ray diffraction. The lattice parameters a vary linearly with the molar fractions, the molar volumes show a positive deviation from the ideal solution behaviour, and the contribution of the solute Cd to the excess molar volumes V is much larger than that of the solute Sn. According to Vegard' s law orsub-regular solution model, the relationship between the experimental data of a or Vm andthe compositions of alloy is obtained by the mathematic regressive method, the prediction precisions of the both formulae are within the limits of experiment error.     

非缔合二元有机液体混合物过剩热容的测定与计算

溶液的过剩热容是热力学的重要函数，对其测定与研究具有理论与实际意义．过剩热容不仅可检验溶液中分子间的相互作用，并可利用其计算混合物的热容．本文报告了用微量热仪对环乙烷一本等七个二元物系全浓度范围内在29815K、常压下过剩热容CEp进行的测定工作，上述体系是由具有     

Pb-Sn-Cd三元系Pb基α相固溶体点阵参数、摩尔体积、超额摩尔体积的研究

用X射线衍射法测定了Pb-Sn-Cd三元系Pb基α相固溶体的点阵参数和摩尔体积。发现点阵参数随摩尔分数浓度呈线性变化,点阵畸变主要受组分的尺寸效应影响;摩尔体积对理想溶液行为呈正偏差,且Cd对超额摩尔体积的贡献远大于Sn。分别按Vegard定律和亚规则溶液模型对点阵参数和摩尔体积的数据与摩尔分数的关系进行数学回归,表明两解析式的预测精度均在实验误差范围内。     

Excess Molar Volume of 1-propanol+Aniline, +N-methylaniline, +N,N-dimethylaniline

Abstract

Densities of the systems, 1-Propanol(P)+aniline(A), 1-Propanol(P)+N-Methylaniline (NMA) and 1-Propanol(P)+N,N-Dimethylaniline(DMA) have been measured from 21°C to 50°C at an interval of 5°C. The excess molar volumes, V ^E, of the systems, P+A and P +NMA have been found to be negative for the whole range of composition. V^E of the system P+DMA has also been found to be negative, except in DMA-rich region where small positive excess volume is observed. The negative excess volume has been explained primarily in terms of strong specific interaction and size difference of unlike molecules. The magnitude of the negative excess volumes of these systems is of the order, P+A > P + NMA > P + DMA, which has been strongly influenced by steric effect due to CH₃ group attached to N-atom of NMA and DMA. In the highly rich region of DMA in P+DMA system the small positive excess volume is accounted for by the steric effect and breaking up of H-bond of 1-Propanol.     

Some Physical Properties of Binary Liquid Systems: (2-Butanone + n-Propionic Acid or n-Butyric Acid)

Abstract

Density, viscosity and surface tension of two binary liquid systems: 2-butanone + n-propionic acid, 2-butanone + n-butyric acid have been determined at 20, 30 and 40°C, over the whole compositional range. The excess values of molar volume, viscosity, Gibbs free energy for the activation of flow and surface tension were evaluated. These excess values were fitted to a Redlich-Kister type of equation. The Grunberg-Nissan parameter, d, was also calculated. The binary viscosity data were fitted to the models of McAllister, Heric, Auslander and Teja and Rice. Surface tension data were fitted to the models of Zihao and Jufu, Rice and Teja, and an empirical two-constant model proposed in this study.     

Density, Viscosity, Refractive Index, and Speed of Sound in Binary Mixtures of Pyridine and 1-Alkanols (C6, C7, C8, C10) at 303.15 K

The densities (ρ), viscosities (η), refractive indices (nD), and speeds of sound (u), of binary mixtures of pyridine with 1-hexanol, 1-heptanol, 1-octanol and 1-decanol, including those of pure liquids, were measured over the entire composition range at 303.15 K and atmospheric pressure. From these experimental data, the values of excess molar volumes (VE), deviations in isentropic compressibilities (Δks), viscosities (Δh), molar refractions (ΔRm), apparent and partial molar volumes (Vf,2 and ), apparent and partial molar compressibilities (Kf,2 and ), of alkanols in pyridine and their corresponding deviations (ΔV and ΔK) were calculated. The variations of these parameters with composition of the mixtures suggest that the strength of interactions in these mixtures follow the order: 1-hexanol＞1-heptanol＞1-octanol＞1-decanol. All the excess and deviation functions were fitted to Redlich-Kister polynomial equation to determine the fitting coefficients and the standard deviations.     

Excess Molar Volumes and Excess Logarithm Viscosities for Binary Mixtures of the Ionic Liquid 1-Butyl-3-methylimidazolium Hexaflurophosphate with Some Organic Compounds

Experimental data of densities and viscosities are presented for the mixtures of the ionic liquid 1-butyl-3-methylimidazolium hexaflurophosphate, [C₄mim][PF₆], with acetone, 2-butanone, 3-pentanone, cyclopentanone and ethyl acetate at 298.15 K. Based on these data, excess molar volumes, V_m^E, and excess logarithm viscosities, (lnη)^E, have been determined for the binaries. It is shown that all values of V_m^E are negative but those of (lnη)^E are positive. Interestingly, a minimum in V_m^E and a maximum in (lnη)^E are observed at about the same mole fraction of the ionic liquid (x = 0.3) for every mixture investigated. Combined with the V_m^E data reported in literature, the effects of the [PF₆]⁻ and [BF₄]⁻ anions are compared. The results have been discussed in terms of the ion–dipole interactions of the cations of the ionic liquids with the organic compounds as well as their influence on the association of [C₄mim]⁺ and [PF₆]⁻ in the ionic liquid.     

Partial Molar and Excess Volumes and Adiabatic Compressibilities of Binary Mixtures of Ethanolamines with Water

Speed of sound and densities of solutions of mixtures of seven ethanolamineswith water were measured over the full range of composition at 25, 35, and 45°C.Results of these measurements were used to calculate adiabatic compressibilities,excess volumes, partial molar and apparent molar volumes, and apparent molarcompressibilities. Knowledge of the above properties of these mixtures are abasis for understanding some of the molecular interactions in these systems. Fromthe analysis of the results, the type of interactions between the ethanolaminesand water are discussed in terms of the number and size of the alkyl groupsattached to the nitrogen atom of ethanolamine.     

Refractive Indices, Densities and Excess Molar Volumes of Monoalcohols + Water

The refractive index, n _D , and density, ρ, of binary mixtures of monoalcohols + water, have been measured at a temperature of 298.15,K and atmospheric pressure. The variation of the refractive indices of these solutions has also been determined with temperature in the range T = (278.15 to 338.15) K and atmospheric pressure. A comparative study has been made of the refractive indices obtained experimentally and those calculated by means of the Lorentz-Lorenz [Theory of Electrons, Dover Phoenix (1952)] and Gladstone-Dale relations [Trans. R. Soc. London 148:887–902 (1858)]; in all cases, the Gladstone–Dale equation was seen to afford values similar to those obtained experimentally. Calculations have been made of the excess molar volumes, V ^E, and the molar refraction deviations, ΔR, of these mixtures and the differences between the experimental values for refractive index and those obtained by means of the Gladstone–Dale equation. Values of V ^E were compared with others in the literature. In all cases the V ^E values were negative, and in all cases, except in the methanol + water, ΔR showed a maximum for x = 0.8.     

Measurements of the Molar Heat Capacities and Excess Molar Heat Capacities for Acetonitrile + Diethylamine or sec-Butylamine Mixtures at Various Temperatures and Atmospheric Pressure

As a continuation of our studies of the excess functions of binary systems containing acetonitrile (1−x)–amines (x) mixtures, the molar heat capacity, Cp, and excess molar heat capacity, Cp ^E, of acetonitrile + diethylamine or sec-butylamine mixtures have been determined as a function of composition at 288.15, 293.15, 298.15 and 303.15 K at atmospheric pressure using a modified 1455 PARR solution calorimeter. The excess heat capacity data are positive for both systems over the whole composition range. The experimental data on the excess molar heat capacity are discussed in terms of the influence of the magnitude of the experimental excess molar enthalpy, H ^E, over the curve shaped for the experimental Cp ^E data, molecular interactions in the mixtures, isomeric effect of the amines and modeling of Cp ^E data.     

Excess Molar Volumes and Partial Molar Volumes for Binary Mixtures of Water With 1,2-Ethanediol, 1,2-Propanediol,and 1,2-Butanediol at 293.15, 303.15 and 313.15 K

Abstract

From dilatometric method at 293.15,303,15, and 313.15K for binary mixtures of water and 1,2-alkane diols, the excess molar volumes, V^E and the partial molar volumes, V _i of both components at 293.15 K have been obtained as a function of mixtures composition. Excess molar volumes were calculated and correlated by a Redlich-Kister type function in terms of mole fraction. The partial molar volumes have been extrapolated to zero concentration to obtain the limiting values at infinite dilution, V ⁰ _i . All mixtures showed negative values and decreases with the chain length of diols. The values become less negative with increasing temperature. The results are explained in terms of dissociation of the self-associated diol molecules and the formation of aggregates between unlike molecules.     

Speed of Sound, Isentropic Compressibilities, and Excess Molar Volumes of Binary Mixtures Containing p-Dioxane

The speed of sound u in and densities of eight binary mixtures of p-dioxane (p-C₄H₈O₂) with methylcyclohexane (c-C₆H₁₁CH₃), 1-chlorohexane (C₆H₁₃C1), 1-bromohexane (C₆H₁₃Br), p-xylene [C₆H₄(CH₃)₂], propylbenzene (C₆H₅C₃H₇), methyl acetate CH₃COOCH₃), butyl acetate (CH₃COOC₄H₉), and amyl acetate (CH₃COOC₅H₁₁) were measured over the whole composition range at 30°C. Isentropic compressibilities (K _S), Rao's molar sound functions (R), excess molar volumes (V ^E), excess isentropic compressibilities (K _S ^E ) together with relative change in volume V/₁₂ values, have been obtained for all measured mole fractions. The excess partial molar volume (V₁-V ₁ ⁰ ) of p-dioxane in different solvents have also been estimated. The experimental results have been analyzed in terms of the Prigogine–Flory–Patterson theory of solutions.