<Emphasis Type="Italic">N</Emphasis>′-tetrazolylmethoxyl derivatives of <Emphasis Type="Italic">N</Emphasis>-methyldiazene <Emphasis Type="Italic">N</Emphasis>-oxides

A preparation method was developed for previously unknown tetrazole derivatives containing in the 1, 2, and/or 5 positions of the tetrazole ring N-methyldiazene-N-oxide-N′-oxymethyl groups.     

Synthesis of <Emphasis Type="Italic">α</Emphasis>-chloropyridine derivatives of <Emphasis Type="Italic">γ</Emphasis>-aminobutyric acid

The sodium salt of N-(6-chloronicotinoyl)-γ-aminobutyric acid, a structural analog of the known nootropic and vasidilating drug picamilon, was synthesized via Schotten–Baumann acylation of γ-aminobutyric acid with 6-chloronicotinoyl chloride and subsequent neutralization of the N-(6-chloronicotinoyl)-γ-aminobutyric acid that was obtained in >60% yield.     

Complex formation of magnesium and calcium ions with trimethylenediamine-<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>’,<Emphasis Type="Italic">N</Emphasis>’-tetraacetic acid

Stability constants and heat effects of the formation reactions of magnesium and calcium trimethylenediaminetetraacetates at 298.15 K and ionic strength of 0.1, 0.5, and 1.0 (mol/L KNO₃) have been determined by means of potentiometry and calorimetry. Standard thermodynamic parameters (log K⁰, Δ_rG⁰, Δ_rH⁰, and Δ_rS⁰) of the studied equilibriums have been determined.     

Crystallization and Simulation Studies in <Emphasis Type="Italic">m</Emphasis>-Dinitrobenzene–<Emphasis Type="Italic">p</Emphasis>-Chloroaniline Eutectic System

Thaw-melt method showed that the phase diagram of m-dinitrobenzene (m-DNB)–p-chloroaniline (p-CA) system belongs to simple eutectic type. The kinetics of solidification followed Hillig and Turnbull’s equation. Excess thermodynamic functions and FT-IR spectral studies indicated some weak interaction between the component molecules in the eutectic. The mechanical strength of the eutectic was found to be higher than those of its components. Molecular stability was predicted on the basis of frontier molecular orbital analysis. The value was found to be 0.06073 a.u. for eutectic, indicating. the possibility of charge transfer interaction during the eutectic formation. Results showed that the eutectic is stabilized by hydrogen-bond formation. Calculated interaction energy of reactants and eutectic was found to be–17.4 kJ mol^–1.     

<Emphasis Type="Italic">β</Emphasis>-Chloro-<Emphasis Type="Italic">α</Emphasis>,<Emphasis Type="Italic">β</Emphasis>-unsaturated carbonyls as convenient precursors of highly substituted benzenes

The Diels–Alder reactions of three β-chloro-α,β-unsaturated carbonyl compounds 1–3 with different dienes were carried out to afford highly functionalized cyclohexenes 4–9, bearing quaternary centers, in good yields. These cycloadducts (CAs) undergo dehydrochlorination with subsequent aromatization in the presence of 1,8-diazabicyclo[5.4.0]undec-7-ene DBU to produce new substituted benzenes 11–14. Compound 10 is the product of lactonization and removal of an HCl molecule from compound 7. All products were characterized by NMR, IR, elementary analysis and some of them by MS. Structure assignments of isomers were carried out on the basis of NMR chemical shifts and coupling constants using 1D, 2D and heteronOe NMR techniques.     

Synthesis and characterization of some <Emphasis Type="Italic">o</Emphasis>,<Emphasis Type="Italic">o</Emphasis>′-dihydroxyazo dyes and their metal complexes

The synthesis and characterization of azo dyes containing o,o′-dihydroxy groups and their azo-metal(II) [Cu, Co, Ni, Zn] chelates by ¹H N.M.R., IR, AAS, UV–VIS, magnetic susceptibility and thin-layer chromatography techniques are reported. The stochiometry of the azo-metal chelates was determined by the spectroscopic titration method to be 1:2 (ML₂). The synthesized azo dyes and azo-metal chelate dyes were applied on wool fabric. Fastness to light and washing were measured.     

Computer models of eutectic-type <Emphasis Type="Italic">T</Emphasis>–<Emphasis Type="Italic">x</Emphasis>–<Emphasis Type="Italic">y</Emphasis> diagrams with allotropy

Using the eutectic-type T–x–y diagram as an example, it can be represented the analysis of its geometrical construction dependence on the temperature of a component two polymorphous modifications which participate in mono- and invariant metatectic and invariant eutectic (eutectoid) transformations above or below (and within) binary eutectics temperature intervals and below a ternary eutectic temperature. Computer models for considered phase diagrams have been designed. Such models help to solve applied tasks like visualization, isopleths and isothermal sections decoding, mass balances calculation and evaluation of phase and conglomerate concentration in microstructure.     

Preparation and crystal structure of bis(triethylene glycol-<Emphasis Type="Italic">O</Emphasis>,<Emphasis Type="Italic">O</Emphasis>′,<Emphasis Type="Italic">O</Emphasis>′’,<Emphasis Type="Italic">O</Emphasis>‴)manganese(II) dibromide

A new complex, bis(triethylene glycol-O,O′,O′’,O?)manganese(II) dibromide [Mn(TEG)₂]²⁺·2Br^?, was prepared. Its structure was studied by single crystal X-ray diffraction. The complex cation [Mn(TEG)₂]²⁺ is of the host-guest type with two TEG ligands (podands) as hosts. Both TEG ligands are disordered and tetradentate, with all the four oxygen atoms of each ligand participating in the coordination. The Mn²⁺ cation has coordination number 8, and its coordination polyhedron is a distorted bisdisphenoid (trigonal dodecahedron). The geometric parameters (bond lengths, bond and torsion angles) of the complex were determined relatively accurately. In the crystal structure, the ions form infinite thick layers by interionic hydrogen bonds O-H···Br^?.     

SBR composites reinforced with <Emphasis Type="Italic">N</Emphasis>-isopropyl-<Emphasis Type="Italic">N</Emphasis>′-phenyl-<Emphasis Type="Italic">P</Emphasis>-phenylenediamine-modified clay

SBR compounds including the N-isopropyl-N’-phenyl-p-phenylenediamine-modified clay(organoclay) were prepared.Effects of modified clay and antioxidant(IPPD) contents on mechanical and rheological properties of SBR composites were studied.FTIR results confirmed that the clay was chemically modified by IPPD and changed into an organoclay.X-ray diffraction(XRD) results confirmed the increase in interlayer distance of the clay due to the insertion of IPPD.Rheological and cure characteristics of SBR compounds were determined using RPA(Rubber Process Analyzer) and rheometer.Scorch time and cure time of SBR compounds decreased with introduction of the organoclay.Mechanical properties and heat aging resistance of the SBR composites were improved significantly by incorporation of the organoclay.     

Study of<Emphasis Type="Italic"> β</Emphasis>–<Emphasis Type="Italic">α</Emphasis> recrystallization of the polypropylene

The crystalline modifications and of polypropylene (PP) were studied by using polarized light microscopy (PLM), wide-angle X-ray diffraction (WAXD), and differential scanning calorimetry (DSC). Typically crystals surrounded by spherulites were observed at low temperature. With increasing temperature the crystals melted and a new crystal appeared. More interestingly, the melting temperature of the new crystal was about 5 ° higher than that of spherulites originally present in the sample formed isothermally. It was assumed that this new crystal was the recrystalline crystal. This assumption was supported by the DSC results. Furthermore, the crystallization kinetics of the PP used was studied on the basis of the traditional Avrami analysis. As a result, the Avrami exponents of crystallization temperature from 120 to 130 °C ranged between 4.21 and 3.60, indicating that the crystallization mechanism of PP order melt was spherulitic growth and random nucleation.     

New heteroscorpionate lanthanide complexes for ring-opening polymerisation of <Emphasis Type="Italic">ε</Emphasis>-caprolactone and <Emphasis Type="Italic">rac</Emphasis>-lactide

Yttrium and lanthanum amido-complexes with bis(pyrazol-1-yl)acetates in their coordination spheres were studied as the catalysts in ε-caprolactone and lactide ring-opening polymerisation. A high molecular mass poly(ε-caprolactone) (PCL) was obtained in almost quantitative yield under mild conditions. rac-Lactide polymerisations were less efficient and required quite harsh experimental conditions to obtain atactic PLA samples with moderate yields. The average chain-length of PCL was dependent upon the choice of the metal centre and the presence of substituents on the pyrazole rings of the ancillary ligand. The ground-state geometries of the complexes and the first stages of ε-caprolactone polymerisation were computationally modelled by means of DFT calculations.     

Phase Diagrams of the <Emphasis Type="Italic">n</Emphasis>-Decane–<Emphasis Type="Italic">n</Emphasis>-Hexadecane–Cyclododecane, <Emphasis Type="Italic">n</Emphasis>-Decane–Cyclododecane,and <Emphasis Type="Italic">n</Emphasis>-Hexadecane–Cyclododecane Systems

The n-decane–n-hexadecane–cyclododecane, n-decane–cyclododecane, and n-hexadecane–cyclododecane systems are studied by means of low-temperature differential thermal analysis using a differential scanning heat flow calorimeter. It is noted that all studied systems belong to the eutectic type. It is concluded that in the n-decane–n-hexadecane–cyclododecane system, the eutectic composition contains 85.0 wt % n-С₁₀Н₂₂, 4.0 wt % n-С₁₆Н₃₄, and 11.0 wt % С₁₂Н₂₄. It has a melting point of ?35.0°C.     

Directed Aminomethylation of Pyrrole,Indole, and Carbazole with <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N′</Emphasis>,<Emphasis Type="Italic">N′</Emphasis>-Tetramethylmethanediamine

Catalytic aminomethylation of pyrrole and indole with N,N,N′,N′-tetramethylmethanediamine in the presence of 5 mol % of ZrOCl₂·8H₂O proceeds selectively at the positions 2, 5 of pyrrole and 1, 3 of indole. Carbazole under the same conditions affords 3-formyl-9-aminomethyl derivative. The reaction in the presence of 5 mol % of K₂CO₃ occurs as monoaminomethylation: for pyrrole at the position 2, for indole at the position 3, and for carbazole at the nitrogen atom of the substrate. Water-soluble 1,1′-(1H-pyrrole-2,5-diyl)bis(N,N-dimethylmethanamine) exhibits a fungistatic activity with respect to phytopathogenic fungi Rhizoctonia solani.     

Cyclization of the substituted <Emphasis Type="Italic">N</Emphasis>-(<Emphasis Type="Italic">Ortho</Emphasis>-cyclopropylphenyl)-<Emphasis Type="Italic">N′</Emphasis>-aryl ureas and thioureas in the gas phase and solution

Electron ionization (EI), chemical ionization (CI), tandem mass spectrometry, high-resolution measurements, and labeling studies as well as quantum chemical calculations were used to understand the behavior of the molecular radical cations (EI) and protonated molecules (CI) of substituted N-(ortho-cyclopropylphenyl)-N'-aryl ureas and N-(ortho-cyclopropylphenyl)-N'-aryl thioureas in a mass spectrometer. Fragmentation schemes and possible mechanisms of primary isomerization were proposed. According to the fragmentation pattern, formation of the corresponding benzoxazines and benzothiazines was considered as the major process of isomerization of the original M(+.) and MH(+), although some portions of these ions definitely transformed into other structures. The treatment of N-(ortho-cyclopropylphenyl)-N'-phenyl urea and N-(ortho-cyclopropylphenyl)-N'-phenylthiourea in solution with strong acids formed predicted 4-ethyl-N-phenyl-4H-3,1-benzoxazin-2-amin and 4-ethyl-N-phenyl-4H-3,1-benzothiazin-2-amine as principal products.     

Thermal characterization of diltiazem and <Emphasis Type="Italic">λ</Emphasis>-carrageenan binary systems

Interactions between diltiazem hydrochloride (DTZ), an orally active calcium antagonist used in the treatment of angina and hypertension, and lambda carrageenan (λCRG), which has been successfully used in matrix formulations to obtain constant and pH-independent release of basic drugs, were investigated in solid state using differential scanning calorimetry (DSC) and thermogravimetric analysis (TG). The effect of particle size on thermal behaviour of the drug and the polymer was assessed, and the result used to select the most suitable granulometric fractions for the study. Physical mixtures ranging in composition from 3:1 to 0.6:1 (by weight) drug-to-polymer ratios were analyzed as such and after kneading. A stoichiometric ratio of interaction of 1.6:1 (w/w) DTZ:λCRG was found, in agreement with that obtained from dialysis equilibrium studies. All the examined granulometric fractions (<45 μm, 45–75 μm, 75–105 μm and >105 μm) of the interaction product showed similar thermal behaviour.     

Spectroscopic and electrical characterization of <Emphasis Type="Italic">α</Emphasis>,<Emphasis Type="Italic">γ</Emphasis>-bisdiphenylene-<Emphasis Type="Italic">β</Emphasis>-phenylallyl radical as an organic semiconductor

The semiconductor properties of the earliest known stable radical, α,γ-bisdiphenylene-β-phenylallyl radical (Koelsch radical, 1^?) were assessed using spectroscopic and electrical techniques. This radical undergoes reversible redox processes, and it has low redox potentials. In addition, 1^? possesses long wavelength absorption bands, owing to the existence of a singly-occupied molecular orbital whose energy level lies between those of the HOMO and LUMO. A spin-coated thin-film of 1^? displays photocurrent and an electron mobility of 6.3 × 10^?7 cm² V^?1 s^?1 on a trially-fabricated organic field effect transistor.     

10<Emphasis Type="Italic">α</Emphasis>-Hydroxy-<Emphasis Type="Italic">β</Emphasis>-isomorphine,a by-product of the synthesis of 10<Emphasis Type="Italic">α</Emphasis>-hydroxymorphine

Abstract  A new compound was isolated from the reaction mixture after O-demethylation of 6-O-acetyl-10α-acetoxycodeine with boron tribromide. The structure of this compound, 10α-hydroxy-β-isomorphine, was elucidated by spectral data, and its spatial arrangement was deduced from an NOE experiment. Capillary zone electrophoresis was used for separation of morphine and its 10-hydroxy analogues. Graphical abstract