Dependence of the Physicochemical and Catalytic Properties of Ce<Subscript>0.5</Subscript>Zr<Subscript>0.5</Subscript>O<Subscript>2</Subscript> Oxide on the Means of Synthesis

The effect the means of synthesis have on the texture, phase composition, redox properties, and catalytic activity of binary oxide systems with the composition Ce_0.5Zr_0.5O₂ are studied. The obtained samples are characterized via BET, SEM, DTA, XRD, and Raman spectroscopy. A comparative analysis is performed of the physicochemical properties of biomorphic systems Ce_0.5Zr_0.5O₂ obtained using wood sawdust and cellulose as templates and the properties of binary oxides of the same composition obtained by template-free means. The catalytic properties of the obtained oxide systems Ce_0.5Zr_0.5O₂ are studied in the reaction of carbon black oxidation. It is shown that the texture of the oxide depends on the means of synthesis. When biotemplates are used, fragile porous systems form from thin binary oxide plates containing micro-, meso-, and macropores. Oxide obtained via coprecipitation consists of dense agglomerates with pores around 30 Å in size. In supercritical water, nanoparticles of metal oxide form that are loosely agglomerated. The intermediate spaces between them act as pores more than 100 Å in size. A system of single-phase pseudocubic modification is obtained using a cellulose template. The crystal lattices of all the obtained systems contain a great many defects. It is shown that the system prepared via synthesis in supercritical water has the best oxygen-exchange properties. A comparative analysis is performed of the effect the physicochemical properties of the samples have on their activity in the catalytic oxidation of carbon black.     

Thermal analysis and epr studies of carbon black oxidation in the presence of copper loaded Y2O3-CeO2-ZrO2 catalyst

The activity of copper-free and copper-loaded 10Y₂O₃-10CeO₂-80ZrO₂ solid solutions towards carbon black combustion was studied using simultaneous thermogravimetric analysis and differential thermal analysis techniques coupled with gas chromatography. It was demonstrated that all studied catalysts lower the temperature of carbon black combustion. The selectivity of the catalytic reaction in CO₂ formation was 100%. The comparison of electron paramagnetic resonance (EPR) spectra of pure catalysts with those of the samples (catalysts mixed with carbon black) after catalysis allowed to evidence, despite of the strong oxidizing atmosphere, a thermal reduction by carbon of Fe³⁺ (impurities), Cu²⁺ and Zr⁴⁺ during the reaction. Moreover a new EPR signal appeared after catalytic test and was attributed to the presence of paramagnetic metal-carbon or/and metal-sulphur complexes. This revised version was published online in August 2006 with corrections to the Cover Date.     

Promotional effect of cobalt addition on catalytic performance of Ce<Subscript>0.5</Subscript>Zr<Subscript>0.5</Subscript>O<Subscript>2</Subscript> mixed oxide for diesel soot combustion

A series of Co-modified Ce_0.5Zr_0.5O₂ catalysts with different concentrations of Co (mass %: 0, 2, 4, 6, 8, 10) was investigated for diesel soot combustion. Ce_0.5Zr_0.5O₂ was prepared using the coprecipitation method and Co was loaded onto the oxide using the incipient wetness impregnation method. The activities of the catalysts were evaluated by thermogravimetric (TG) analysis and temperature-programmed oxidation (TPO) experiments. The results showed the soot combustion activities of the catalysts to be effectively improved by the addition of Co, 6 % Co/Ce_0.5Zr_0.5O₂ and that the 8 % Co/Ce_0.5Zr_0.5O₂ catalysts exhibited the best catalytic performance in terms of lower soot ignition temperature (T_i at 349°C) and maximal soot oxidation rate temperature (T_m at 358°C). The reasons for the improved activity were investigated by X-ray diffraction (XRD), Brunauer–Emmett–Teller (BET), H₂ temperature-programmed reduction (H₂-TPR), X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM). These results revealed that the presence of Co could lower the reduction temperature due to the synergistic effect between Co and Ce, thereby improving the activity of the catalysts in soot combustion. The 6 % Co catalyst exhibited the best catalytic performance, which could be attributed to the greater amounts of Co³⁺ and surface oxygen species on the catalyst.     

Trapped molecular species in N-doped TiO<Subscript>2</Subscript>

Nitrogen-doped TiO₂, a novel photocatalyst active in the decomposition of organic pollutants using visible light, contains several different types of paramagnetic centers. These are molecular species, such as NO and NO₂ radicals and other species, deeply interacting with the TiO₂ structure. All or part of these species is related to specific properties of the solid. Electron paramagnetic resonance has been employed to characterize the N-containing paramagnetic species present in N-doped anatase TiO₂ powders obtained via sol-gel synthesis. In the present work attention is focused on molecular species generated during the synthesis process and segregated in cavities of the TiO₂ structure.     

Selective Catalytic Reduction of NO by NH<Subscript>3</Subscript> over MoO<Subscript>3</Subscript> Promoted Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> Catalyst

A series of MoO₃ doped Fe₂O₃ catalysts prepared by the co-precipitation method were investigated in the selective catalytic reduction of NO by NH₃ (NH₃-SCR). The catalysts displayed excellent catalytic activity from 225 to 400°C and high tolerance to SO₂/H₂O poisoning at 300°C. To characterize the catalysts the N₂-BET, XRD, Raman, NO-TPD, NH₃-TPD and in situ DRIFTS were carried out. It was found that the main reason explaining a high NH₃-SCR performance might be the synergistic effect between Fe and Mo species in the catalyst that could enhance the dispersion of Fe₂O₃ and increase NH₃ adsorption on the catalyst surface.     

The activation characteristics of the decomposition of H<Subscript>2</Subscript>O<Subscript>2</Subscript> on palladium-carbon catalysts

The kinetics of catalytic decomposition of H₂O₂ on palladium-carbon catalysts with various deposited metal distributions in carrier (active carbon) porous granules was studied. The activation parameters (E _a and A ₀) of the process were calculated by the Arrhenius equation. A determining factor for the catalytic process was found to be the entropy factor (A ₀), which characterized the formation and dissociation of activated transition complexes. A quantum-chemical study of the electronic structure of palladium-carbon catalysts showed the occurrence of electron density transfer from the carbon matrix to metal clusters and collectivization of their electronic systems. This increased the donor-acceptor ability of the synthesized materials and, as a consequence, their catalytic activity.     

Carbon nanotubes as a conductive additive in LiFePO<Subscript>4</Subscript> cathode material for lithium-ion batteries

The electrochemical properties and cyclic performances of commercial LiFePO₄ cathode material with different ratio of carbon black (CB) and carbon nanotubes (CNTs) as conductive material were tested in this study. Compared with other samples, the sample with 3 wt % CNTs exhibited the best electro-chemical and cyclic performances at various discharging rate at room temperature; and adhesion strength of electrode was improved by adding CNTs. The enhanced electrode performance may due to the unique natures of CNTs and the contact area of CNTs with active material or current collector.     

Selective catalytic oxidation of ammonia into nitrogen and water vapour over transition metals modified Al<Subscript>2</Subscript>O<Subscript>3</Subscript>, TiO<Subscript>2</Subscript> and ZrO<Subscript>2</Subscript>

Copper or iron supported on commercially available oxides, such as γ-Al₂O₃, TiO₂ (anatase) and monoclinic tetragonal ZrO₂ (mt-ZrO₂) were tested as catalysts for selective catalytic oxidation of ammonia into nitrogen and water vapour (NH₃-SCO) in the low temperature range. Different commercial oxides were used in this study to determine the influence of the specific surface area, acidic nature of the support and crystalline phases as well as of the type of species and aggregation state of transition metals on the catalytic performance in selective ammonia oxidation. Copper modified oxide supports were found to be more active and selective to nitrogen than catalysts impregnated with iron. Activities of both transition metal modified samples decreased in the following order: mt-ZrO₂, TiO₂ (anatase), γ-Al₂O₃. Quantitative total ammonia conversion was achieved with the Cu/ZrO₂ catalytic system at 400°C. Characterisation techniques, e.g. H₂-temperature programmed reduction, UV-VIS-diffuse reflectance spectroscopy, suggest that easily reducible copper oxide species are important in achieving high catalytic performances at low temperatures.     

Catalytic removal of soot particles over MnCo<Subscript>2</Subscript>O<Subscript>4</Subscript> catalysts prepared by the auto-combustion method

Soot removal for exhaust gas from diesel engine has been addressed due to the more stringent legislation and environmental concerns. MnCo₂O₄ catalysts were systematically prepared using glucose as a fuel via the auto-combustion method and applied for soot removal. The as-prepared samples were characterized by X-ray diffraction (XRD), O₂-temperature-programmed oxidation (TPO) reaction and H₂-temperature-programmed reduction reaction (H₂-TPR). The catalytic activities for soot combustion were evaluated by micro activity test (MAT) with a tight contact mode between soot and catalysts. Compared with catalysts prepared by the solid state method without glucose, auto-combustion method in the presence of glucose can decrease the synthetic temperature, avoiding high temperature treatment and sintering. The catalysts prepared with glucose could catalyze soot oxidation effectively and the derived values of T₁₀, T₅₀, and T₉₀ were 326, 408, and 468 °C in a tight contact mode, respectively, showing a significant drop of T₁₀, T₅₀, and T₉₀ by 156, 177, and 178 °C for non-catalytic reaction.     

Study of Fe-doped V<Subscript>2</Subscript>O<Subscript>5</Subscript>/TiO<Subscript>2</Subscript> catalyst for an enhanced NH<Subscript>3</Subscript>-SCR in diesel exhaust aftertreatment

Selective catalytic reduction (SCR) with ammonia has been considered as the most promising technology, as its effect deals with the NO_X. Novel Fe-doped V₂O₅/TiO₂ catalysts were prepared by sol–gel and impregnation methods. The effects of iron content and reaction temperature on the catalyst SCR reaction activity were explored by a test device, the results of which revealed that catalysts could exhibit the best catalytic activity when the iron mass ratio was 0.05%. It further proved that the VTiFe (0.05%) catalyst performed the best in denitration and its NO_X conversion reached 99.5% at 270 °C. The outcome of experimental procedures: Brunauer–Emmett–Teller surface area, X-ray powder diffraction, transmission electron microscopy, X-ray photoelectron spectroscopy, temperature-programmed reduction and adsorption (H₂-TPR, NH₃-TPD) techniques showed that the iron existed in the form of Fe³⁺ and Fe²⁺ and the superior catalytic performance was attributed to the highly dispersed active species, lots of surface acid sites and absorbed oxygen. The modified Fe-doped catalysts do not only have terrific SCR activities, but also a rather broad range of active temperature which also enhances the resistance to SO₂ and H₂O.     

Impact of carbon coating thickness on the electrochemical properties of Li<Subscript>3</Subscript>V<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript>/C composites

A series of Li₃V₂(PO₄)₃/C composites with different amounts of carbon are synthesized by a combustion method. The physical and electrochemical properties of the Li₃V₂(PO₄)₃/C composites are investigated by X-ray diffraction, element analysis, Raman spectroscopy, scanning electron microscopy, transmission electron microscopy and electrochemical measurements. The effects of carbon content of Li₃V₂(PO₄)₃/C composites on its electrochemical properties are conducted with cyclic voltammetry and electrochemical impedance. The experiment results clearly show that the optimal carbon content is 4.3 wt %, and more or less amount of carbon would be unfavorable to electrochemical properties of the Li₃V₂(PO₄)₃/C electrode materials. The results would provide some basis for further improvement on the Li₃V₂(PO₄)₃ electrode materials.     

Performance and characterisation of CeO<Subscript>2</Subscript>-TiO<Subscript>2</Subscript>-WO<Subscript>3</Subscript> catalysts for selective catalytic reduction of NO with NH<Subscript>3</Subscript>

Ce-Ti-W-O _x catalysts were prepared and applied to the NH₃-selective catalytic reduction (SCR) reaction. The experimental results showed that the Ce-Ti-W-O _x catalyst prepared by the hydrothermal method exhibited higher NO conversion than those synthesised via the sol-gel and impregnating methods, while the optimal content of WO₃ and molar ratio of Ce/Ti were 20 mass % and 4: 6, respectively. Under these conditions, the catalyst exhibited the highest level of catalytic activity (the NO conversion reached values higher than 90 %) across a wide temperature range of 225–450°C, with a range of gas hourly space velocity (GHSV) of 40000–140000 h^?1. The catalyst also exhibited good resistance to H₂O and SO₂. The influences of morphology, phase structure, and surface properties on the catalytic performance were investigated by N₂ adsorption-desorption measurement, XRD, XPS, H₂-TPR, and SEM. It was found that the high efficiency of NO removal was due to the large BET surface area, the amorphous surface species, the change to element valence states, and the strong interaction between Ce, Ti, and W.     

Cycling Performance at Li<Subscript>7</Subscript>La<Subscript>3</Subscript>Zr<Subscript>2</Subscript>O<Subscript>12</Subscript>|Li Interface

Cyclability of the Li|Li₇La₃Zr₂O₁₂ interface was tested by voltammetry under externally applied potential difference. It was found that the solid electrolyte synthesized in the study contains a minor amount of an impurity in the form of lithium carbonate. This impurity forms, when brought in contact with metallic lithium, carbon that pierces the whole volume of the ceramic separator and produces a channel for a flow of electrons through the material, which leads to a poor cyclability of the solid electrolyte. A possible way to solve the given problem is via a purposeful replacement of the carbonate in the intergrain space of Li₇La₃Zr₂O₁₂ with another crystalline or glassy plasticizer that possesses an acceptable unipolar lithium conductivity (no less than 10^–6 S cm^–1) and forms, when brought in contact with metallic lithium, no electrically conducting compound or a compound capable of reversibly intercalating/deintercalating lithium.     

Sol–Gel Synthesis of Membrane Mo<Subscript>2</Subscript>C/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> Catalysts with Different Architectures and Their Catalytic Activity in the Reaction of Carbon Dioxide Conversion of Methane

The methods of synthesis of composite membrane catalysts based on Mо₂C and Al₂O₃ support by a sol–gel method were developed. The samples of membrane catalysts with different architectures were developed. The difference in the catalytic activity of membrane catalysts in carbon dioxide conversion of methane depending on the porous structure and morphology of the catalytic layer was studied.     

Effect of the Support on the Nature of Metal-Promoter Interactions in Ru-Cs<Superscript>+</Superscript>/MgO and Ru-Cs<Superscript>+</Superscript>-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> Catalysts for Ammonia Synthesis

The Ru-Cs⁺/MgO and Ru-Cs⁺/γ-Al₂O₃ catalysts, which were prepared by an impregnation method using RuOHCl₃ and Cs₂CO₃ as precursor compounds and reduced with H₂ at 450°C, are characterized by X-ray diffraction, high-resolution transmission electron microscopy (with X-ray microanalysis), and X-ray photoelectron spectroscopy (XPS). The Cs⁺/MgO(Al₂O₃) systems, Ru-Cs⁺ black, and model systems prepared by cesium sputtering onto polycrystalline ruthenium foil are studied as reference samples. It is found that, in the Ru-Cs⁺/MgO sample, cesium is present as a Cs_{2 + x}O cesium suboxide, which weakly interacts with the support, localized on the surface of Ru particles or near them. In the case of Ru-Cs⁺/γ-Al₂O₃, cesium occurs as a species that is tightly bound to the support; this is likely surface cesium aluminate, which prevents promoter migration to Ru particles. The Ru-Cs⁺/MgO sample exhibits a considerable shift of the Ru3d line in the XPS spectra toward lower binding energies, as compared to the bulk metal. It is hypothesized that this shift is due to a decrease in the electron work function from the surface of ruthenium because of the polarizing effect of Cs⁺ ions in contact with Ru particles. Based on the experimental results, the great difference between the catalytic activities of the Ru-Cs⁺/MgO and Ru-Cs⁺/γ-Al₂O₃ systems in ammonia synthesis at 250–400°C and atmospheric pressure is explained.     

Effect of pretreatment conditions on the catalytic activity of coprecipitated Ce<Subscript>0.5</Subscript>Zr<Subscript>0.5</Subscript>O<Subscript>2</Subscript> catalyst in soot oxidation

The temperature of soot oxidation and efficiency of Ce_0.5Zr_0.5O₂ catalyst depends on its morphology, which determines the area of intergranular contact between the solid substrate and the catalyst. The temperature-programmed reduction in hydrogen to 1000°C and oxidation at 500°C (redox cycles) cause the mobility of oxygen in oxide to be enhanced and decrease the temperature of soot combustion. Oxidation of soot in the air flow on the Ce_0.5Zr_0.5O₂ catalyst result in its activation. Reuse of the catalyst decreases the temperature of soot oxidation.     

Acid-catalyzed isomerization of caryophyllene in the presence of SiO<Subscript>2</Subscript> and Al<Subscript>2</Subscript>O<Subscript>3</Subscript> impregnated with sulfuric acid

The conversion of caryophyllene upon contact with Al₂O₃ and SiO₂ impregnated with sulfuric acid was carried out, and the components of the resulting mixtures were identified. Having in hands such “standard” mixtures greatly facilitates identification of components of sesquiterpene fractions of essential oils and other mixtures of natural origin. The catalytic activity of silica gel impregnated with sulfuric acid (H⁺-SiO₂) in the acid-catalyzed isomerization of caryophyllene is significantly higher than that for H⁺-Al₂O₃ and is comparable with the activity of concentrated sulfuric acid.     

Adsorption of NO,NH<Subscript>3</Subscript> and H<Subscript>2</Subscript>O on V<Subscript>2</Subscript>O<Subscript>5</Subscript>/TiO<Subscript>2</Subscript> catalysts

The adsorption of small molecules NO, NH₃ and H₂O on V₂O₅/TiO₂ catalysts is studied with the semiempirical SCF MO method MSINDO as pre-stage for the selective catalytic reduction of NO. The mixed catalyst is represented by hydrogen-terminated cluster models. The local arrangement of the cluster atoms is in accordance with available experimental information. Partial relaxation of cluster atoms near the adsorption sites is taken into account. Calculated adsorption energies are compared with experimental literature data. Rapid convergence of computed properties with cluster size is observed. A possible reaction mechanism for the catalytic reduction of NO with NH₃ and O₂ is outlined.     

Kinetics and mechanism of carbon monoxide oxidation on the supported metal complex catalyst PdCl<Subscript>2</Subscript>-CuCl<Subscript>2</Subscript>/Al<Subscript>2</Subscript>O<Subscript>3</Subscript>

The kinetics of carbon monoxide oxidation with atmospheric oxygen on a PdCl₂-CuCl₂/γ-Al₂O₃ catalyst was studied at T = 27°C and an N₂-O₂-CO mixture pressure of 1 atm. The catalyst was prepared by cold impregnation. Three groups of mechanistic hypotheses are considered, and two of them are demonstrated to be consistent with kinetic data, although they differ in the roles of water and oxygen in carbon monoxide oxidation.     

Strong enhancement of the chemiluminescence of the Cu(II)-H<Subscript>2</Subscript>O<Subscript>2</Subscript> system on addition of carbon nitride quantum dots,and its application to the detection of H<Subscript>2</Subscript>O<Subscript>2</Subscript> and glucose

The authors report that carbon nitride quantum dots (CN QDs) exert a strong enhancing effect on the Cu(II)/H₂O₂ chemiluminescent system. Chemiluminescence (CL) intensity is enhanced by CN QDs by a factor of ~75, while other carbon nanomaterials have a much weaker effect. The possible mechanism of the effect was evaluated by recording fluorescence and CL spectra and by examining the effect of various radical scavengers. Emitting species was found to be excited-state CN QDs that produce green CL peaking at 515 nm. The new CL system was applied to the sensitive detection of H₂O₂ and glucose (via glucose oxidase-catalyzed formation of H₂O₂) with detection limits (3σ) of 10 nM for H₂O₂ and 100 nM for glucose. The probe was employed for glucose determination in human plasma samples with satisfactory results.

Open image in new window

Graphical abstract The effect of carbon nitride quantum dots (CN QDs) on Cu(II)-H₂O₂ chemiluminescence reaction was studied and the new CL system was applied for sensitive detection of glucose based on the glucose oxidase (GOx)-catalyzed formation of H₂O₂.