Textural and catalytic properties of the FexOy/Fe-KClO4 system

Selected properties of commercial iron powders, standardised in the atmosphere of hydrogen, have been studied. The reactivity of iron oxides in the thermal decomposition of KClO₄ in the solid-state mechanical mixture of Fe and KClO₄ containing 9, 13, 17, 21 and 25 wt.% of KClO₄, respectively, has been tested by the differential thermal analysis (DTA) and thermogravimetric analysis (TG). It has been established that the Fe₃O₄ phase on the surface of the iron powder act as an effective catalysts in the thermal decomposition of KClO₄.     

Thermal behaviour and firing characteristics of Zr/KClO4 primer mixture containing CuO

The effect of CuO on the thermal behaviour of Zr/KClO₄ primer mixtures was studied by thermoanalytical techniques, and the Bruceton method and its related calculation. It was found that the CuO catalytically promoted the decomposition of Zr/KClO₄ primer mixtures and shifted the exothermic peak of DSC curves to lower temperatures. In addition, the Zr/KClO₄ primer mixture containing CuO had a significant effect on the firing characteristics of electro-explosive devices.     

Phenomenological study of the catalytic thermal decomposition of potassium perchlorate by iron(II) oxides with different preparing histories

The catalytic decomposition of KClO₄ by Fe₂O₃, obtained by calcination of Fe(II) salts at different temperatures, was investigated by DTA, TG, X-ray and IR. A sample without catalyst was found to begin fusion and decomposition simultaneously, and to form an intermediate, KClO₃. Addition of catalysts resulted in solid-phase decomposition before fusion of KClO₄, and in a small amount of KClO₃. The difference in catalytic effect observed for different catalysts was less in the molten-phase decomposition than in the solid phase. The initial decomposition temperature (T _i) increased with the temperature of preparation of the catalyst and showed a definitive relationship with the crystallite size of the catalyst. The change ofT _i is discussed on the basis of then-type semiconductive properties of the catalyst.     

Influence of temperatures and starting materials used to prepare α-Fe2O3 on its catalytic activity at the thermal decomposition of KClO4

In order to elucidate the influence of preparative history of α-Fe₂O₃ on its reactivity, the catalytic thermal decomposition of KClO₄ by α-Fe₂O₃ was studied by means of DTA and X-ray techniques. The catalysts were prepared by the calcination of three iron salts, Fe(OH)(CH₃COO)₂, FeSO₄ ? 7H₂O and Fe₂(SO₄)₃ ? αH₂O, at temperatures of 500–1200°C in air. The lower the preparation temperature of αFe₂O₃, the larger the specific surface area and reversely the smaller the crystalline size. KClO₄ without α-Fe₂O₃ was found to begin fusion and decomposition simultaneously at about 530°C. The addition of αFe₂O₃ resulted in promotion of the decomposition reaction of KClO₄; a lowering of 30–110°C in the initial decomposition temperature and a solid-phase decomposition before fusion of KClO₄. The influence of preparative history of α-Fe₂O₃ on the decomposition mainly depended on the preparation temperature rather than the starting material. The initial decomposition temperature of KClO₄ increased with an increase of the preparation temperature of α-Fe₂O₃. The effect of α-Fe₂O₃ was discussed on the basis of the charge transfer and the oxygen abstraction models.     

Influence of H-ZSM-5, Al-MCM-41 and acid hybrid ZSM-5/MCM-41 on polyethylene decomposition

Thermogravimetry (TG) and mass spectrometry (MS) combined techniques have been used to investigate the thermal degradation and catalytic decomposition of high-density polyethylene (HDPE) over solid acid catalysts as H-ZSM-5, Al-MCM-41 and a hybrid material with a bimodal pore size distribution (H-ZSM-5/Al-MCM-41). The silicon/aluminum ratio of all catalysts is 15. Both thermal and catalytic processes showed total conversion in a single mass loss step. Furthermore, the catalytic conversion presents average reduction of 27.4%, in the onset decomposition temperature. The kinetic parameters were calculated using non-isothermal method. These parameters do not indicate significant differences between the thermal and catalytic processes. Even though, the presence of the catalysts changes the reaction mechanism, from phase boundary controlled reaction to random nucleation mechanism. Important difference in distribution of evolved products was detected when several catalysts were used. However, in all cases the main products were alkanes (C₂, C₃ and C₄), alkenes (C₃ and C₄), dienes (C₄ and C₅) and traces of aromatic compounds.     

The Thermal Properties and Firing Characteristics of Zr/KClO4 Priming Compositions Containing Graphite,Fe2O3 and Al2O3 additives

Thermal decomposition of Zr/KClO₄ priming compositions containing different concentration of additives, such as graphite, Fe₂O₃ and Al₂O₃ have been studied by DSC/TG techniques. The firing characteristics of these primer mixtures have also been examined by Bruceton test and by adiabatic calorimeter. The results of these experiments suggest that strong interaction has been occurred between KClO₄ and Fe₂O₃ in the solid state. This revised version was published online in July 2006 with corrections to the Cover Date.     

Thermosonimetry and thermomicroscopy of the decomposition of NaClO4 and KClO4

Thermal decompositions of NaClO₄ and KClO₄ were followed by simultaneous TS-DTA and thermomicroscopy. For NaClO₄ TS curves corresponding to melting/decomposition and solidification of molten NaCl were found to consist of six peaks. During decomposition of KClO₄, three TS peaks appeared. The origin of these TS peaks is discussed on the basis of thermomicroscopic observations during which melting of the particles, evolution of bubbles of different sizes, formation of solid products of varied morphologies, vigorous vibration of these solids, and precipitation of NaCl or KCl were observed.     

Some Polynuclear Coordination Compounds Precursors of Chromites Synthesis,Physicochemical Characterization and Thermal Stability

The polynuclear coordination compounds LnCr(tartrate)₃·nH₂O where Ln(III)=La-Er, obtained through a precipitation method, were characterized on the basis of elemental analysis, their electronic and vibrational spectra and magnetic susceptibility measurements. The possibility of obtaining chromites through the transformations of the polynuclear coordination compounds in the solid state was considered. The thermal decompositions of these compounds, studied by TG and DTA methods, were found to follow an almost uniform pattern. The decompositions occurred in six-eight steps. The first two steps involved dehydration, and the third the transformation of tartrate anions to oxalate, followed by conversion to carbonate and oxocarbonate intermediates. The final product in each case was LnCrO₃. A non-isothermal kinetic analysis of the first decomposition steps was performed, the most probable decomposition mechanism being selected and the kinetic parameters evaluated. The final products of the transformations were characterized. This revised version was published online in August 2006 with corrections to the Cover Date.     

Catalytic Active Site for NO Decomposition Elucidated by Surface Science and Real Catalyst

Comprehensive studies combining surface science and real catalyst were performed to get further insight into catalytic active site and reaction mechanism for NO decomposition over supported palladium and cobalt oxide-based catalysts. On palladium single-crystal model catalysts, adsorption, dissociation and desorption behavior of NO was found to be closely related to the surface structures, the stepped surface palladium being active for dissociation of NO. In accordance with this result, the activity of powder Pd/Al₂O₃ catalysts for NO decomposition was directly related to the number of step sites exposed on the surface, suggesting that the step sites act as the catalytic active site for NO decomposition on Pd/Al₂O₃. NO decomposition over cobalt oxide was found to be significantly promoted by addition of alkali metals. Surface science study and catalyst characterization led to the same conclusion that the interface between the alkali metal and Co₃O₄ serves as the catalytic active site. From the results of in situ Fourier transform infrared (FT-IR) spectroscopy and isotopic transient kinetic analysis, a reaction mechanism was proposed in which the reaction is initiated by NO adsorption onto alkali metals to form NO₂⁻ species and then NO₂⁻ species react with the adsorbed NO species to form N₂ over the interface between the alkali metal and Co₃O₄.     

Thermal decomposition of barium(II) tetraphenylborate

Barium(II) tetraphenylborate, Ba(Bph₄))₂·4H₂O was prepared, and its decomposition mechanism was studied by means of TG and DTA. The products of thermal decomposition were examined by means of gas chromatography and chemical methods. A kinetic analysis of the first stage of thermal decomposition was made on the basis of TG and DTG curves and kinetic parameters were obtained from an analysis of the TG and DTG curves using integral and differential methods. The most probable kinetic function was suggested by comparison of kinetic parameters. A mathematical expression was derived for the kinetic compensation effect.     

Study of The Mechanism and Kinetic Parameters of The Thermal Decomposition of Cobalt Sulphate Hexahydrate

Thermogravimetry (TG-DTG), and differential thermal analysis (DTA) were used in the study of the kinetics of decomposition of cobalt sulphate hexahydrate under an air atmosphere. The kinetics of the particular stages of CoSO₄ 6H₂ O decomposition were evaluated from the dynamic mass loss data. The values of the kinetic parameters for each stage of the thermal decomposition were calculated from the α(T) data by using the integral method, applying the Coats-Redfern approximation. This revised version was published online in July 2006 with corrections to the Cover Date.     

Effect of NO, SO2, and O2 on the conversion of nitrous oxide on iron-containing zeolite catalysts

Conditions were found for facilitation of the conversion of nitrous oxide in the presence of Fe-containing zeolite catalysts by oxidants (NO, SO₂, and O₂). The results were interpreted in the framework of a mechanism involving decomposition of N₂O. The effect of NO_x on the reduction of nitrous oxide by C₃-C₄ alkanes was established. __________ Translated from Teoreticheskaya i éksperimental’naya Khimiya, Vol. 42, No. 4, pp. 241–245, July–August, 2006.     

Al含量对Pt-SO2-4 /ZrO2-Al2O3固体超强酸催化

通过向SO^2-₄ /ZrO₂催化剂中同时引入适量的Pt和Al₂O₃, 制备出了具有较高催化性能和稳定性的Pt-SO^2-₄ /ZrO₂-Al₂O₃型固体超强酸催化剂. 以正戊烷异构化反应为探针, 考察了Al含量对催化剂性能的影响; 并采用X射线衍射(XRD)、比表面积测定(BET)、红外(IR)光谱、程序升温还原(TPR)、热重-差热分析(TG-DTA)和氨-程序升温脱附(NH₃-TPD)手段对催化剂进行了表征. 结果表明, Al能够提高ZrO₂的晶化温度, 抑制硫的分解, 增加催化剂的比表面积, 增强硫氧键的结合, 提高催化剂的还原性能, 增加催化剂的酸强度和酸总量. 当Al₂O₃含量(质量分数, w)为5.0%时, Pt-SO^2-₄ /ZrO₂-Al₂O₃固体超强酸催化剂的催化活性最好, 在100 h内异戊烷收率可稳定在52.0%以上, 选择性在98.2%以上.     

Kinetics of thermal decomposition of CeO2 nanocrystalline precursor prepared by precipitation method

The thermal decomposition of CeO₂ nanocrystalline precursor prepared by chemical precipitation method was investigated using thermo-gravimetric/differential scanning calorimetry (TG/DSC) and X-ray powder diffraction (XRD). In particular, the differential thermal analysis curves for the decomposition of CeO₂ nanocrystalline precursor were measured at different heating rates in air by a thermal analyzer (NETZSCH STA 449C, Germany). The kinetic parameters of the thermal decomposition of CeO₂ nanocrystalline precursor were calculated using the Kissinger method and the Coats-Redfern method. Results show that the apparent active energy E of the reaction is 105.51 kJ/mol, the frequency factor lnA is 3.602 and the reaction order n is 2. This thermal decomposition process can be described by the anti-Jander equation and a three-dimensional diffusion mechanism. Tanslated from Journal of Central South University (Science and Technology), 2007, 38(3): 428–432 [译自: 中南大学学报(自然科学版]     

The study of thermal decomposition kinetics of zinc oxide formation from zinc oxalate dihydrate

This study is devoted to the thermal decomposition of ZnC₂O₄·2H₂O, which was synthesized by solid-state reaction using C₂H₂O₄·2H₂O and Zn(CH₃COO)₂·2H₂O as raw materials. The initial samples and the final solid thermal decomposition products were characterized by Fourier transform infrared and X-ray diffraction. The particle size of the products was observed by transmission electron microscopy. The thermal decomposition behavior was investigated by thermogravimetry, derivative thermogravimetric and differential thermal analysis. Experimental results show that the thermal decomposition reaction includes two stages: dehydration and decomposition, with nanostructured ZnO as the final solid product. The Ozawa integral method along with Coats–Redfern integral method was used to determine the kinetic model and kinetic parameters of the second thermal decomposition stage of ZnC₂O₄·2H₂O. After calculation and comparison, the decomposition conforms to the nucleation and growth model and the physical interpretation is summarized. The activation energy and the kinetic mechanism function are determined to be 119.7 kJ mol^?1 and G(α) = ?ln(1 – α)^1/2, respectively.     

Thermal decomposition of potassium chlorate in presence of chromium(III) oxide and nickel(II) chromite(III)

A study of thermal behaviour of intimate mixtures of different molar ratios of potassium chlorate and chromium(III) oxide, and potassium chlorate and nickel(II) chromite(III) was made by employing thermogravimetry, differential thermal analysis, chemical analysis, infrared spectroscopy and X-ray powder diffraction analysis. Potassium chlorate in presence of Cr(III), starts decomposing around 200°C which is much below the decomposition temperature of pure KClO₃. Each mole of Cr(III) takes up 8/3 moles of KClO₃ to become oxidized into potassium dichromate.     

Effect of hydrothermal treatment on properties of Ni-Al layered double hydroxides and related mixed oxides

The Ni-Al layered double hydroxides (LDHs) with Ni/Al molar ratio of 2, 3, and 4 were prepared by coprecipitation and treated under hydrothermal conditions at 180 °C for times up to 20 h. Thermal decomposition of the prepared samples was studied using thermal analysis and high-temperature X-ray diffraction. Hydrothermal treatment increased significantly the crystallite size of coprecipitated samples. The characteristic LDH diffraction lines disappeared completely at ca. 350 °C and a gradual crystallization of NiO-like mixed oxide was observed at higher temperatures. Hydrothermal treatment improved thermal stability of the Ni2Al and Ni3Al LDHs but only a slight effect of hydrothermal treatment was observed with the Ni4Al sample. The Rietveld refinement of powder XRD patterns of calcination products obtained at 450 °C showed a formation of Al-containing NiO-like oxide and a presence of a considerable amount of Al-rich amorphous component. Hydrothermal aging of the LDHs resulted in decreasing content of the amorphous component and enhanced substitution of Al cations into NiO-like structure. The hydrothermally treated samples also exhibited a worse reducibility of Ni²⁺ components. The NiAl₂O₄ spinel and NiO still containing a marked part of Al in the cationic sublattice were detected in the samples calcined at 900 °C. The Ni2Al LDHs hydrothermally treated for various times and related mixed oxides obtained at 450 °C showed an increase in pore size with increasing time of hydrothermal aging. The hydrothermal treatment of LDH precursor considerably improved the catalytic activity of Ni2Al mixed oxides in N₂O decomposition, which can be explained by suppressing internal diffusion effect in catalysts grains.     

Nitrous Oxide Adsorption and Decomposition on Zeolites and Zeolite-like Materials

Decomposition of N₂O on modified zeolites, crystalline titanosilicalites, and related amorphous systems is studied by the catalytic and spectroscopic methods. Zinc-containing HZSM-5 zeolites and titanosilicalites with moderate Ti/Si ratios are shown to exhibit a better catalytic performance in N₂O decomposition as compared with conventionally used Cu/HZSM-5 zeolites and amorphous Cu-containing catalysts. Dehydroxylation of the HZSM-5 zeolite by calcination at 1120 K results in an enhancement of the N₂O conversion. The mechanism of the reaction and the role of coordinatively unsaturated cations and Lewis acid sites in N₂O decomposition are discussed on the basis of the spectroscopic data.     

Investigation on The Thermal Properties of Fe2O(SO4)2. Part II

Fe₂O(SO₄)₂ is a secondary product of the decomposition of FeSO₄⋅H₂O. Part I of this study presents results on the synthesis of Fe₂O(SO₄)₂ in gaseous environment containing either low or high concentration of oxygen. In this paper the existence of differences between the structures of Fe₂O(SO₄)₂ and Fe₂(SO₄)₃ is proved on the basis of a detailed thermal study of Fe₂O(SO₄)₂ upon dynamic heating (differential thermal analysis) and upon isothermal heating (thermal-analytic balance) in various gaseous environments as well as by presenting kinetic data on the processes of decomposition of both compounds. This revised version was published online in July 2006 with corrections to the Cover Date.     

Synthesis and thermal decomposition of bismuth peroxotitanate to Bi2Ti2O7

Bi-peroxotitanate was synthesized by a peroxo method and after thermal decomposition Bi₂Ti₂O₇ was obtained. DTA, TG and DSC curves of Bi₂[Ti₂(O₂)₄(OH)₆]5H₂O were recorded and used to determine isothermal conditions suitable for obtaining the intermediate samples corresponding to the phases observed during the thermal decomposition. The samples were identified by quantitative analysis, IR spectroscopy and X-ray analysis. The experimental results were used to propose a mechanism of thermal decomposition of the investigated compound to a nanosized Bi₂Ti₂O₇. The optimum conditions were also determined for obtaining Bi₂Ti₂O₇, which is applicable for piezosensors.