High power and high beam quality CW green beam generated by diode-side-pumped intracavity frequency doubled Nd:YAG laser

We report a stable high power and high beam quality diode-side-pumped CW green laser from intracavity frequency doubled Nd:YAG laser with LBO crystal. By using a advanced resonator, a large fundamental mode size in the laser crystal and a tight focus in the nonlinear crystal could be obtained simultaneously, which are favorable for high power and high beam quality CW green laser generation. The green laser delivered a maximum 532 nm output power of 40 W. The corresponding optical-to-optical conversion efficiency and electrical-to-optical conversion efficiency were 8.6% and 5.0%, respectively. Under 532 nm output power of 34 W, the beam quality factor was measured to be 1.6.     

Efficient, kHz repetition rate, gain-switched Cr:forsterite laser

We have developed a gain-switched room-temperature Cr:forsterite laser operating at repetition rates of between 1 and 34 kHz, and pumped by a continuous wave, Q-switched Nd:YAG laser. With optimised output coupling, an output pulse energy of 52 μJ was measured at 1.5 kHz repetition rate, corresponding to 11% efficiency and 13% slope efficiency. Threshold pulse energy was 53 μJ. Output power of 370 mW was obtained at 10 kHz repetition rate and 4.4 W pump power. Water cooling was not required for repetition rates up to 10 kHz. In a tunable, folded resonator, the Cr:forsterite wavelength tuned between 1173 and 1338 nm. This laser operated with maximum pulse energy of 34 μJ, efficiency of 13%, and power of 307 mW. The laser output was close to diffraction-limited with M² of 1.2. Received: 6 January 1999 / Published online: 29 July 1999     

Diode end-pumped Q-switched high-power intracavity frequency-doubled Nd:GdVO4/KTP green laser

A diode-laser-array end-pumped acousto-optically Q-switched intracavity frequency-doubled Nd:GdVO₄/KTP green laser, formed with a three-mirror folded resonator, has been demonstrated. With 15 W of pump power incident upon the Nd:GdVO₄ crystal, a maximum average green output power of 3.75 W was obtained at 50 kHz of pulse repetition frequency, giving an optical conversion efficiency of 25%, whereas the effective intracavity frequency-doubling efficiency was determined to be 72%. At the incident pump power of 12.8 W, the shortest laser pulse was achieved at a pulse repetition rate of 10 kHz, the resulting pulse width, single pulse energy, and peak power were measured to be 35 ns, 108 μJ, and 3.1 kW, respectively. Received: 18 May 2000 / Published online: 20 September 2000     

Continuous-wave operation of a room-temperature Ho:YAP laser pumped by a Tm:YAP laser

We reported the Ho:YAP laser pumped by the Tm:YAP laser. The Ho:YAP laser maximum output power was 4.91 W when the incident power was 10.1 W with the threshold of 2.63 W. The slope efficiency was 63.7%, corresponding to an optical-to-optical efficiency of 48.6%. The Ho:YAP output wavelength was centered at 2118.2 nm with bandwidth of about 1 nm. We estimate the beam quality to be M² = 1.29.     

Passive mode locking of a diode-pumped Nd:Gd 0.64 Y 0.36 VO 4 laser with a GaAs saturable absorber mirror

We report a diode-pumped Nd:Gd_0.64Y_0.36VO₄ laser passively mode locked by using a GaAs saturable absorber mirror. Both the Q-switched and continuous-wave (CW) mode locking were experimentally realized. The CW mode-locked pulses have a pulse width of about 8.8 ps at a repetition rate of 161.3 MHz. Limited by the available pump power, a maximum output power of 2.47 W was obtained for the CW mode-locked pulses with a slope efficiency of about 26.6%.     

Compact, Low Threshold Nd^3＋：YVO4 Self-Raman Laser at 1178 nm

A compact low-threshold Raman laser at 1178 nm is experimentally realized by using a diode-end-pumped actively Q-switched Nd^3＋ ：YVO4 self-Raman laser. The threshold is 370mW at a pulse repetition frequency of S kHz. The maximum Raman laser output is 182 m W with the pulse duration smaller than 20 ns at a pulse repetition frequency of 30kHz with 1.8 W incident power. The optical efficiency from the incident power to the Raman laser is 10% and the slope efficiency is 13.5%.     

Lasing performance of a chemical oxygen iodine laser (COIL) with advanced ejector-nozzle banks

Experimental results have demonstrated that the use of ejector-nozzle concepts can allow to achieve simultaneously high chemical efficiency and high pressure recovery in a chemical oxygen iodine laser. The estimated small-signal gain of the gain medium generated by these nozzle banks was from 0.5 to 0.8 %/cm. In laser experiments with all nozzle banks (NB-1–NB-5), Pitot pressures of the order of 80 Torr and Mach numbers of ∼2 in the cavity-mixing chamber have been achieved. The geometry of a given ejector-nozzle bank and gas-flow conditions affect the power extraction and chemical efficiency. The main factors for high efficiency and high power are small mixing scale, high area for the oxygen flow, dilution of chlorine by helium, and the arrangement of nozzles. A chemical efficiency of 25% at a power level of ∼900 W was obtained for NB-1 having the smallest mixing scale, parallel injection of all flows, and dilution of oxygen by helium. The highest power of ∼1.2 kW with a chemical efficiency of 19.5% and 160 W/cm² of specific output power was achieved with NB-5 having the largest area for the oxygen flow and dilution of oxygen by helium. Received: 7 October 2002 / Accepted: 20 January 2003 / Published online: 28 May 2003 RID="*" ID="*"Corresponding author. Fax: +7-8462/355-600, E-mail: nikolaev@fian.smr.ru     

Characteristics of Nd：GdVO4 Laser with Different Nd-Doping Concentrations

We report the properties of a compact diode-pumped continuous-wave Nd：GdV04 laser with a linear cavity and different Nd-doped laser crystals. In a 0.2at.% Nd-doped Nd：GdVO4 laser, 1.54 W output laser power is achieved at 912nm wavelength with a slope efficiency of 24.8% at an absorbed pump power of 9.4W. With 0.3at.% Nd-doping concentration, we can obtain the either single-wavelength emission at 1064nm or 912nm or the dual-wavelength emission at 1064nm and 912nm by controlling the incident pump power. From an incident pump power of 11.6 W, the 1064nm emission between ^4Fa/2 and ^4I11/2 is suppressed completely by the 912nm emission between ^4Fa/2 and ^4I9/2. We obtain 670 mW output of the 912nm single-wavelength laser emission with a slope efficiency of 5.5% by taking an incident pump power of 18.4 W. Using a Nd：GdV04 laser with 0.4at.% Nd-doping concentration, we obtain either the single-wavelength emission at 1064nm or the dual-wavelength emission at both 1064nm and 912nm by increasing the incident pump power. We observe a strong competition process in the dualavelength laser.     

High-efficiency continuous-wave diode-pumped Tm:Ho:LuAG laser at 2.1 μm

Continuous Wave (CW) laser action has been observed from a Ho:Tm:LuAG rod at 2.1 m pumped by a diode laser at 785 nm in the temperature range of 77–200 K. The maximum power observed was 1.38 W at an incident power of 4 W at a crystal temperature of 77 K. The optical-to-optical conversion efficiency was observed to be 35.6% at a threshold power of 0.2 W with a 95% output coupling mirror.     

Diode-pumped Nd:YAG laser using reflective pump optics

We have examined the performance of a diode-laser side-pumped Nd:YAG laser using elliptical mirrors to focus the output of 6 × 10 W laser-diode arrays into the Nd: YAG rod. The multimode cw output power was 14 W with an optical to optical efficiency of 29%. With a resonator designed for TEM₀₀ mode operation 12 W of output was achieved.     

Efficient and high-power intracavity frequency doubled diode-side-pumped Nd:YAG/KTP continuous wave (CW) green laser

Highly efficient continuous wave (CW) green beam generation by intracavity frequency doubling of a diode side-pumped Nd:YAG laser using a single pump head based on a copper-coated flow tube in a V-shaped cavity geometry has been demonstrated. A maximum 30.5 W of CW green power was obtained at a total diode pumping power of 260 W corresponding to 11.7% conversion efficiency of diode pump power to CW green power and 4.7% conversion efficiency of electrical power to CW green power. The performance of the laser by considering the pump power induced thermal lensing effect and the M²-parameter at the fundamental wavelength has been analyzed.     

Diode-pumped passively Q-switched Nd:LuVO4 laser at 916 nm

We demonstrate a passively Q-switched Nd:LuVO₄ laser at 916 nm by using a Nd, Cr:YAG crystal as the saturable absorber. As we know, it is the first time to realize the laser with a simple linear resonator. When the incident pump power increased from 14.6 W to 23.7 W, the pulse width of the Q-switched laser decreased from 24 ns to 21 ns. The pulse width was insensitive to the incident pump power in the experiment. The average output power of 288 mW with repetition rate of 39 kHz was obtained at an incident pump power of 22.5 W, with the optical-to-optical efficiency and slope efficiency 1.3% and 3.6%, respectively.     

High Power Photonic Crystal Fibre Raman Laser

A cw Raman laser based on a 100-m photonic crystal fibre is demonstrated with up to 3.8 W output power at the incident pump power of 12 W, corresponding to an optical-to-optical efficiency of about 31.6%.. The second order Stokes light, which is firstly reported in a cw photonic crystal fibre Raman laser, is obtained at 1183nm with an output power of 1.6 W and a slope efficiency of about 45.7%.     

Sub-nanosecond microchip laser with intracavity Raman conversion

Efficient sub-nanosecond pulse operation of microchip lasers with intracavity Raman conversion and pulse compression is presented for the first time. The microchip lasers were composed of Nd:LSB or Nd:YAG laser crystals, Cr⁴⁺:YAG saturable absorber, and Ba(NO₃)₂ Raman medium. The pulse duration obtained at the Stokes wavelength (1196 nm) was as short as 118 ps. Optical conversion efficiency of laser-diode pump power to the Stokes power of 8% was reached. Pulse energy and peak power of Stokes emission were 1.2 μJ and 5.4 kW, correspondingly. Numerical calculations are in good agreement with obtained experimental results. Received: 20 December 2002 / Revised version: 6 March 2003 / Published online: 5 May 2003 RID="*" ID="*"Corresponding author. Fax: +1-716/645-6945, E-mail: ankuzmin@acsu.buffalo.edu RID="**" ID="**"Present address: University at Buffalo, SUNY, The Institute for Lasers, Photonics, and Biophotonics, 458 NSC, Buffalo, NY 14 260-3000, USA     

Continuous-wave Ho:GdVO4 laser pumped by Tm-doped fiber laser with a fiber Bragg grating at room temperature

We reported the Ho:GdVO₄ laser pumped by Tm-doped laser with a fiber Bragg grating. 2.03 W continuous-wave Ho:GdVO₄ laser output power is obtained under 10.5 W incident pump power, with the optical-to-optical conversion efficiency and slope efficiency of 19.3% and 32.3%, respectively, at 7 °C. We can see that, the lower the temperature is, the better the laser output character is. The beam quality factor is M² ∼ 1.29 measured by the traveling knife-edge method.     

Cesium vapor laser with transverse pumping by multiple laser diode arrays

We have demonstrated a Cs vapor laser that utilizes fifteen laser diode arrays for transverse pumping of the gain medium. A maximum output power of 28 W was achieved with a total optical to optical efficiency of 14% and a slope efficiency of 15%. Transverse pumping allows scaling of such a laser system to a higher power level by simple increasing of the gain medium volume and the number of pump sources.     

Comparison of cw laser performance of Nd:KGW, Nd:YAG, Nd:BEL, and Nd:YVO4 under laser diode pumping

4 crystals under low-power laser diode end-pumping. Output power dependencies on the pump power and the pump wavelength of these diode-pumped solid state lasers were investigated. The high Nd³⁺ concentration of the Nd:KGW samples used in our measurements as well as up-conversion and exited-state absorption processes in Nd:KGW cause the reduced laser output power dependence on the pump wavelength which was experimentally observed. At pump levels up to 270 mW a slope efficiency of η_sl≈46% was reached for the Nd:KGW laser. Nd:KGW microchip laser operation with a slope efficiency of η_sl≈50% was demonstrated. Thermal lensing in Nd:KGW at pump powers up to 3 W was measured. Received: 4 August 1997     

Continuous-wave high-power multi-pass pumped thin-disc Nd:GdVO4 laser

A thin-disc Nd:GdVO₄ laser in multi-pass pumping scheme was developed. Continuous-wave output power of 13.9 W at 1.06 μm for an absorbed power at 808 nm of 22 W was demonstrated from a 250-μm thick, 0.5-at.% Nd:GdVO₄ in a 4-pass pumping; the slope efficiency in absorbed power was 0.65, or 0.47 in input power. Output performances were also investigated under diode laser pumping at 879 nm, directly into the emitting ⁴F_3/2 level: maximum power of 3.6 W was obtained at 6.2 W of absorbed power with 0.69 slope efficiency. Compared with pumping at 808 nm, into the highly absorbing ⁴F_5/2 level, improvements of laser parameter in absorbed power (increase of slope efficiency, decrease of threshold) were obtained, showing the advantages of the pumping into the emitting level. However, the laser performances expressed vs. the incident power were modest owing to the low absorption efficiency at 879 nm. Thus, increased number of passes of the medium would be necessary in order to match the performances in input power obtained under 808-nm pumping.     

Efficient passively Q-switched operation of a diode-pumped Nd:GGG laser with a Cr:YAG saturable absorber

The continuous-wave (cw) and passive Q-switching operation of a diode-end-pumped gadolinium gallium garnet doped with neodymium (Nd:GGG) laser at 1062 nm was realized. A maximum cw output power of 6.9 W was obtained. The corresponding optical conversion efficiency was 50.9%, and the slope efficiency was determined to be 51.4%. By using Cr⁴⁺:YAG crystals as saturable absorbers, Q-switching pulse with average output power of 1.28 W, pulse width of 4 ns and repetition rate of 6.2 kHz were obtained. The single-pulse energy and peak power were estimated to be 206 μJ and 51.6 kW, respectively. The conversion efficiency of the output power from cw to Q-switching operation was as high as 84.7%.     

Modeling and optimizing of high-concentration erbium-doped fiber amplifiers with consideration of ion-clusters

Starting from the modeling of isolated ions and ion-clusters, a closed form rate and power evolution equations for high-concentration erbium-doped fiber amplifiers are constructed. Based on the equations, the effects of the fraction of ion-clusters in total ions and the number of ions per cluster on the performance of high-concentration erbium-doped fiber amplifiers are analyzed numerically. The results show that the presence of the ion-clusters deteriorates amplifier performance, such as the signal power, signal gain, the threshold pump power for zero gain, saturated signal gain, and the maximum gain efficiency, etc. The optimum fiber length or other parameters should be modified with the ion-clusters being taken into account for the amplifiers to achieve a better performance.