<Emphasis Type="Italic">N</Emphasis>-hydroxyphthalimide-initiated radical polymerization of vinyl monomers

The initiating ability of N-hydroxyphthalimide in polymerization of methyl methacrylate and acrylonitrile was examined. For the polymerization of methyl methacrylate, the initial polymerization rates and activation energies were determined, and the dependences of the polymerization rates on the initiator and monomer concentrations were evaluated. An initiation mechanism was suggested.     

Synthesis of Block Copolymers of Styrene with <Emphasis Type="Italic">D</Emphasis>,<Emphasis Type="Italic">L</Emphasis>-Lactide by the Sequential Controlled Cationic Polymerization and Ring-Opening Anionic Polymerization

The cationic polymerization of styrene initiated by the system 2-chloro-2-phenylpropane–TiCl₄–pyridine is studied in a mixture CH₂Cl₂–n-hexane at a temperature of –80°С. It is shown that under these conditions polymerization occurs via the living mechanism at [monomer]: [initiator] ≤ 100. The method of preparing polystyrenes with terminal primary hydroxyl groups (M_n = 4000–10000 g/mol) by the sequential controlled cationic polymerization of styrene and the in situ alkylation of 4-phenoxy-1-butanol by polystyrene macrocations is proposed. The resulting functionalized polystyrenes are used as macroinitiators of anionic-coordination ring-opening polymerization of D,L-lactide in the presence of tin bis(2-ethyl hexanoate) [Sn(Oct)₂] in toluene at 80°С. Copolymers polystyrene-block-poly(D,L-lactide) with the controlled length of the poly(D,L-lactide) block (M_n = 10000–17000 g/mol) and a relatively low molecular-weight distribution (M_w/M_n = 1.6–1.8) are synthesized. Formation of the block copolymers is confirmed by ¹Н NMR spectroscopy, gel-permeation chromatography, and atomic force microscopy.     

Reaction of transsilylation of <Emphasis Type="Italic">N</Emphasis>-methyl-<Emphasis Type="Italic">N</Emphasis>-trimethylsilylacetamide with silanes ClCH<Subscript>2</Subscript>SiR<Superscript>1</Superscript>R<Superscript>2</Superscript>Cl

The reaction of N-methyl-N-trimethylsilylacetamide with silanes ClCH₂SiR¹R²Cl (R¹, R² = H, Me; H, Ph; Ph₂) leads to the formation of (O→Si) chelate compounds with pentacoordinate silicon: N-[chloro(methyl)-silyl]methyl-, N-[chloro(phenyl)silyl]methyl-, and N-[chloro(diphenyl)silyl]methyl-N-methylacetamides. From the data of multinuclear NMR spectroscopy, the intermediates of the reaction of N-methyl-N-trimethylsilylacetamide with ClCH₂SiPhHCl and ClCH₂SiPh²Cl are stable in CDCl₃ solution at room temperature during several days and slowly rearrange to the final (O–Si) chelate compounds.     

Specific Features of <Emphasis Type="Italic">N</Emphasis>-Morpholinoethyl Methacrylate Synthesis

Methods for synthesis of N-morpholinoethyl methacrylate were compared. It was shown that the monomer produced by acylation of N-morpholinoethanol with methacrylic acid anhydride or methacryloyl chloride spontaneously polymerizes in storage. The possible reasons for the spontaneous polymerization of N-morpholinoethyl methacrylate produced by the acylation method were considered. The conditions in which a stable-in-storage monomer can be obtained in 86–88% yield by the method of re-esterification of methyl methacrylate with N-morpholinoethanol were determined.     

Crystal structures of a family of layered coordination polymers containing divalent metal ions (Mn<Superscript>2+</Superscript>, Co<Superscript>2+</Superscript>, Ni<Superscript>2+</Superscript> and Zn<Superscript>2+</Superscript>) and the 3-amino 4-methyl benzoate ion

The syntheses and crystal structures of the layered coordination polymers M(C₈H₈NO₂)₂ [M = Mn (1), Co (2), Ni (3) and Zn (4)] are described. These isostructural compounds contain centrosymmetric trans-MN₂O₄ octahedra as parts of infinite sheets; the ligand bonds to three adjacent metal ions in μ³-N,O,O′ mode from both its carboxylate O atoms and its amine N atom. In each case, weak intra-sheet N–H?O and C–H?O hydrogen bonds may help to consolidate the structure. Crystal data: 1, C₁₆H₁₆MnN₂O₄, M _r = 355.25, monoclinic, P2₁/c (No. 14), a = 10.6534(2) Å, b = 4.3990(1) Å, c = 15.5733(5) Å, β = 95.1827(10)°, V = 726.85(3) ų, Z = 2, R(F) = 0.026, wR(F ²) = 0.067. 2, C₁₆H₁₆CoN₂O₄, M _r = 359.24, monoclinic, P2₁/c (No. 14), a = 10.6131(10) Å, b = 4.3374(4) Å, c = 15.3556(17) Å, β = 95.473(4)°, V = 703.65(12) ų, Z = 2, R(F) = 0.041, wR(F ²) = 0.091. 3, C₁₆H₁₆N₂NiO₄, M _r = 359.02, monoclinic, P2₁/c (No. 14), a = 10.6374(4) Å, b = 4.2964(2) Å, c = 15.2827(8) Å, β = 95.9744(14)°, V = 694.66(6) ų, Z = 2, R(F) = 0.028, wR(F ²) = 0.070. 4, C₁₆H₁₆N₂O₄Zn, M _r = 365.68, monoclinic, P2₁/c (No. 14), a = 10.6385(5) Å, b = 4.2967(3) Å, c = 15.2844(8) Å, β = 95.941(3)°, V = 694.89(7) ų, Z = 2, R(F) = 0.038, wR(F ²) = 0.107.     

Solution Thermodynamics of <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis><Superscript>/</Superscript>-Ethylenebis-(salicylideneiminato)-diaquochromium(III) Chloride in Aqueous Dimethylsulphoxide

The densities, viscosities and refractive indices of N,N ^/-ethylene-bis(salicylideneiminato)-diaquochromium(III) chloride, [Cr(salen)(H₂O)₂]Cl, in aqueous dimethylsulfoxide (DMSO) with different mass fractions (w ₂ = 0.20, 0.40, 0.60, 0.80 and 1.00) of DMSO were determined at 298.15, 308.15 and 318.15 K under atmospheric pressure. From measured densities, viscosities and refractive indices the apparent molar volumes (V _φ ), standard partial molar volume (V _φ ⁰ ), the slope (S _V ^* ), standard isobaric partial molar expansibility (φ _E ⁰ ) and its temperature dependence (?φ _E ⁰ /?T) _p , the viscosity B-coefficient, its temperature dependence (?B/?T), solvation number (S _n ) and apparent molar refractivity (R _D ^φ ), etc., were calculated and discussed on the basis of ion–ion and ion–solvent interactions. These results revealed that the solutions are characterized by ion–solvent interactions rather than by ion–ion interactions and the complex behaves as a long range structure maker. Thermodynamics of viscous flow was discussed in terms of transition state theory.     

Synthesis and crystal structure of EnH<Superscript>2</Superscript>[IrCl<Superscript>6</Superscript>]

The preparation of EnH²[IrCl⁶] is described. Crystal data for C₂H₁₀Cl₆IrN₂ are: a = 6.8972(11) Å, b = 6.9435(16) Å, c = 7.3354(11) Å; α = 88.269(3)°, β = 65.495(2)°, γ = 60.305(2)°, V = 270.76(9) ų, space group P1, Z = 1, d_calc = 2.864 g/cm³. Crystal chemical analysis of the general motif of the structure was performed by the translation sublattice identification technique. It has been found that complex anions [IrCl₆]^2? follow the nodes of a rather regular rhombohedral subcell with the parameters a_c = 7.1 Å, α_c = 64°.     

Formation of mononuclear rhodium(III) sulfates: <Superscript>103</Superscript>Rh and <Superscript>17</Superscript>O NMR study

It was shown that the monomeric rhodium sulfate complexes [Rh(H₂O)₄(SO₄)]⁺, trans-[Rh(H₂O)₂(SO₄)₂]^?, cis-[Rh(H₂O)₂(SO₄)₂]^?, and [Rh(SO₄)₃]^3? were not predominant forms in aqueous solutions. The ¹⁰³Rh NMR chemical shifts of the complexes were assigned, and the conditions for their formation in solutions, concentration parameters, and acidity at which the fraction of the monomers was maximal were determined. The constants of formation of the complexes and ion pair (IP) were estimated: K _IP = 8 ± 3.5, K ₁ ≈ 8, K _2trans ≈ 1, K _2cis ≈ 1, and K ₃ ≈ 2.     

<Emphasis Type="Italic">N</Emphasis>-aryl-<Emphasis Type="Italic">o</Emphasis>-iminobenzoquinones as novel regulators of radical polymerization

The effect of a number of quinoid compounds on methyl methacrylate polymerization initiated by azo-bis(isobutyronitrile) has been studied. It has been revealed that N-aryl-o-iminobenzoquinones, in contrast to o-benzoquinones, can provide radical polymerization of methyl methacrylate in controllable mode. The efficiency of the compounds as chain growth regulators has been found to depend on their composition and reaction conditions. It has been established that 4,6-di-tert-butyl-N-(2,6-diethylphenyl)-o-iminobenzoquinone and 4,6-di-tert-butyl-N-(2,6-diisopropylphenyl)-o-iminobenzoquinone under radical initiation conditions provide the synthesis of poly(methyl methacrylate) with wide-range molecular weight, retaining polydispersity indices about ~1.4–1.8 up to deep conversions.     

Synthesis,crystal structures,and antibacterial activities of Schiff base zinc(II) complexes [Zn(L<Superscript>1</Superscript>)<Subscript>2</Subscript>] and [Zn(L<Superscript>2</Superscript>)<Subscript>2</Subscript>]

The reaction of cyclopentylamine with 2-hydroxy-1-naphthaldehyde and 5-nitrosalicylaldehyde, respectively, in methanol affords two new Schiff bases, 1-(cyclopentyliminomethyl)naphthalen-2-ol (HL¹) and 4-nitro-2-(cyclopentyliminomethyl)phenol (HL²). Two new zinc(II) complexes, [Zn(L¹)₂] (I) and [Zn(L²)₂] (II), derived from the Schiff bases, have been prepared and characterized by single-crystal X-ray diffraction, FT-IR, and elemental analysis. Complex I crystallizes in the monoclinic space group P2₁/c with a = 17.834(4), b = 14.738(3), c = 9.868(2) Å, β = 91.20(3)°, V = 2593.1(9) ų, Z = 4. Complex II crystallizes in the triclinic space group P \(\bar 1\) with a = 10.206(1), b = 10.502(1), c = 12.554(1) Å, α = 66.771(2)°, β = 78.133(2)°, γ = 76.292(2)°, V = 1191.8(1) ų, Z = 2. The Zn atom in each complex is coordinated by two N and two O atoms from two Schiff base ligands, forming a tetrahedral geometry. The Schiff bases and the complexes were assayed for antibacterial activities.     

Application of an experimental design to optimize a segregation method of <Superscript>129</Superscript>I and <Superscript>14</Superscript>C

In this work, the optimization of a segregation method of ¹²⁹I and ¹⁴C, two long-living radionuclides, main constituents of nuclear radioactive waste, has been developed. To be able to carry out this project, a fractional factorial experimental design was applied using 5 factors and 2 levels by factor (2^5–2). Only 8 experiments were necessary to identify the variables affecting the process, and very good recoveries of both radionuclides were obtained: (94?±?2)% for ¹²⁹I, and (99?±?1)% for ¹⁴C. The segregation of ¹²⁹I was influenced by flow (Q), volume of H₂SO₄ (V_H+), and carriers (CR), while V_H+ and time (t) played a major role in the segregation of ¹⁴C.     

Crystal structure of two polymorphs of molybdenyl salicylidene-2-furfuriliminate (HL<Superscript>1</Superscript>) [MoO<Subscript>2</Subscript>(L<Superscript>1</Superscript>)<Subscript>2</Subscript>]

The crystal structures of two polymorphs of molybdenyl salicylidene-2-furfuryliminate [MoO₂(L¹)₂] have been solved by X-ray diffraction. Both complexes crystallize in centrosymmetric and non-centrosymmetric space groups (P2₁/c and Р2₁, respectively) of monoclinic system and have similar structures and close geometric parameters. The Мо atoms have a distorted octahedral coordination to two terminal oxo ligands in cis-positions to each other and two pairs of the oxygen atoms (cis- to О(oxo)) and the nitrogen atoms (trans- to О(oxo)) of two bidentate chelate ligands (L¹)^–.     

The thermodynamic properties of the [(Me<Subscript>3</Subscript>Si)<Subscript>7</Subscript>C<Subscript>60</Subscript>]<Subscript>2</Subscript> fullerene complex

The temperature dependence of the heat capacity C _p ^o of the [(Me₃Si)₇C₆₀]₂ fullerene complex was measured for the first time using precision adiabatic vacuum calorimetry over the temperature range 6.7–340 K and high-accuracy differential scanning calorimetry at 320–635 K. For the most part, the error in the C _p ^o values was about ±0.5%. An irreversible endothermic effect caused by the splitting of the dimeric bond between fullerene fragments and the thermal decomposition of the complex was observed at 448–570 K. The thermodynamic characteristics of this transformation were calculated and analyzed. Multifractal analysis of the low-temperature (T < 50 K) heat capacity was performed, and conclusions were drawn concerning the character of the heterodynamicity of the structure. The experimental data obtained were used to calculate the standard thermodynamic functions C _p ^o (T), H ^o (T) ? H ^o (0), S ^o (T) ? S ^o (0), and G ^o (T) ? H ^o (0) over the temperature range from T → 0 to 445 K and estimate the standard entropy of formation of the compound from simple substances at 298.15 K. The standard thermodynamic properties of [(Me₃Si)₇C₆₀]₂ are compared with those of the (C₆₀)₂ dimer, the [(η⁶-Ph₂)₂Cr]⁺[C₆₀]^?? fulleride, and the initial C₆₀ fullerene.     

Crystal structure and <Superscript>121,123</Superscript>Sb NQR parameters of ammonium tridecafluorotetraantimonate(III) NH<Subscript>4</Subscript>Sb<Subscript>4</Subscript>F<Subscript>13</Subscript>

(NH₄)Sb₄F₁₃ crystals (I) are synthesized and their crystal structure (tetragonal crystal system: a = 9.6431(2) Å, c = 6.5503(2) Å, V = 609.11(3) ų, Z = 2, d _calc = 4.100 g/cm³, F(000) = 664, space group I4?) is determined. The main structural units of I are tetranuclear anionic [Sb₄F₁₃]^? complexes and [NH₄]⁺ cations. The anionic complexes are built of four SbF₃ groups linked together by tetrahedral bridging fluorine atom. At room temperature the (NH₄)Sb₄F₁₃ crystals are isostructural to previously studied МSb₄F₁₃ (М = K, Rb, Cs, and Tl). The study of ^121,123Sb NQR spectra of compound I is performed in a range of 77-370 K, which shows that when the temperature decreases (<250 K) the substance exhibits piezoelectric properties, as do other compounds of this group, but with a violation of their isostructurality.     

Synthesis,crystal structure of a new tetranuclear Ni<Stack><Subscript>2</Subscript><Superscript>II</Superscript></Stack>Cu<Stack><Subscript>2</Subscript><Superscript>II</Superscript></Stack> complex containing a macrocyclic ligand

The first inorg/organic hybrid complex incorporating the macrocyclic oxamide, of formula [(NiL)₂Cu₂(μ-NSC)₂(NSC)₂] (1), (NiL, H₂L = 2, 3-dioxo-5,6,14,15-dibenzo-1,4,8,12-tetraazacyclo-pentadeca-7,13-dien), have been synthesized and structurally characterized. The crystals crystallize in the triclinic system, space group P-1, for (1) a = 8.319(3) Å, b = 10.434(4) Å, c = 14.166(5) Å, a = 107.030(5)°, β  =  91.257(5)°, γ = 107.623(5)°. The complex involved both bridging N, S-ligand, and oxamide ligand, C–H?S interactions and NCS → Ni weak coordination interactions making the complex superamolecular.     

Coordination radical polymerization of methyl methacrylate,initiated by the azobis(isobutyronitrile)–tri-<Emphasis Type="Italic">n</Emphasis>-butylborane binary system

A procedure for coordination radical polymerization of methyl methacrylate in the bulk, initiated by the azobis(isobutyronitrile)–tri-n-butylborane binary system at 60°С, was developed. Butyl radicals participating in the initiation step were detected by EPR. These radicals are generated by complexation of cyanoisopropyl radicals with trialkylborane. The radical at the boron atom transforms from the C-centered to N-centered structure with the subsequent S_R2 reaction and fast generation of n-butyl radicals. As found by NMR and confirmed by kinetic studies, the tri-n-butylborane–initiator–monomer system stimulates generation of propagating poly(methyl methacrylate) radicals.     

Synthesis,structure formation,and thermal expansion of A<Superscript>+</Superscript>M<Superscript>2+</Superscript>MgE<Superscript>4+</Superscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript>

The compounds AMMgE(PO₄)₃ (A = Na, K, Rb, Cs; M = Sr, Pb, Ba; E = Ti, Zr) were synthesized by the sol–gel procedure followed by heat treatment and studied by X-ray diffraction, differential thermal and electron microprobe analysis, and IR spectroscopy. The phosphates crystallize in the kosnarite (KZr₂(PO₄)₃, space group \(R\bar 3\)) and langbeinite (K₂Mg₂(SO₄)₃, space group P2₁3) structural types. The structure of KPbMgTi(PO₄)₃ was refined by full-profile analysis (space group P2₁3, Z = 4, a = 9.8540(3) Å, V = 956.83(4) ų). The structure is formed by a framework of vertex-sharing MgO₆ and TiO₆ octahedra and PO₄ tetrahedra. The K and Pb atoms fully occupy the extra-framework cavities and are coordinated to nine oxygen atoms. A variable-temperature X-ray diffraction study of KPbMgTi(PO₄)₃ showed that the compound expands isotropically and refer to medium-expansion class (linear thermal expansion coefficients α _a = α _b = α _c = 8 × 10^–6°C^–1). The number of stretching and bending modes of the PO₄ tetrahedron observed in the IR spectra is in agreement with that predicted by the factor group analysis of vibrations for space groups \(R\bar 3\) and P2₁3. A structural transition from the cubic langbeinite to the rhombohedral kosnarite was found for CsSrMgZr(PO₄)₃. In the morphotropic series of ASrMgZr(PO₄)₃ (A = Na, K, Rb, Cs) the kosnarite–langbeinite transition occurs upon the Na → K replacement. The effect of the sizes and electronegativities of cations combined in AMMgE(PO₄)₃ on the change of the structural type was analyzed.     

Synthesis of ultra high molecular weight poly(dimethyldiallyl ammonium chloride)

In the study we reported the synthesis of poly-(dimethyldiallyl ammonium chloride) (PDMDAAC) with ultra high molecular weight. The polymerization method consists in the following: the ultra-high purity monomer synthesized in lab was used as the raw material, and APS as the initiator. APS was added in a lump and the polymerization temperature was increased stepwise to complete the polymerization gradually in 9 h reaction time. The maximum intrinsic viscosity ([η]) of PDMDAAC reached 3.66 dL g^–1 at a monomer conversion rate (Conv) of 96.71%. The structure and properties of PDMDAAC were characterized using FTIR, NMR, GPC-MALLS, and DTA-TG. The effects of polymerization conditions, such as the polymerization temperature, m(DMDAAC), m(APS): m(DMDAAC), and m(Na₄EDTA): m(DMDAAC), on the [η] and Conv of products were investigated. Meanwhile, the effects of the monomer purity on the [η] of products were compared. The results showed that the types and amount of impurities in monomer solution are two key factors, which affect the polymerization and, thus, the molecular weight of products.     

A Systematic Search for Structures and Stabilities of Asymmetric Clusters (HfInN<Subscript>3</Subscript>)<Subscript><Emphasis Type="Italic">n</Emphasis></Subscript> (<Emphasis Type="Italic">n</Emphasis> = 1-6)

In order to find single source precursors (SSP), the structures, relative stabilities, and IR spectra of small asymmetric clusters (HFInN₃) _n (n = 1–6) are systematically investigated by means of the density functional theory at the B3LYP level. The obtained geometries show that the frameworks of clusters (HFInN₃) _n (n = 2–6) prefer to be 2n-membered ring with alternating indium and α-nitrogen atoms. The averaged binding energies reveal that all of asymmetric clusters (HFInN₃) _n (n = 1–6) can continue to gain energy as the cluster size n increasing. The second-order difference of energy (Δ₂E) and the HOMO-LUMO energy gap (E_gap) as a function of the cluster size n both exhibit a pronounced even-odd alternation phenomenon. The influences of cluster size n and temperature T on the thermodynamic properties of clusters are discussed. Judged by enthalpies and Gibbs free energies, the formations of the most stable clusters (HFInN₃) _n (n = 2–6) from the monomer are thermodynamically favorable in the range of 200–800 K.     

Synthesis,scope, <Superscript>1</Superscript>H and <Superscript>13</Superscript>C spectral assignments of isomeric dibenzofuran carboxaldehydes

Two isomeric dibenzofuran carboxaldehydes, namely 2-methoxydibenzo[b,d]furan-1-carbaldehyde (4) and 2-methoxydibenzo[b,d]furan-3-carbaldehyde (5), were synthesized. Formylation of 2-methoxydibenzo[b,d]furan (3) with α,α-dichloromethyl methyl ether and tin(IV) chloride gave a mixture of aldehydes 4 and 5 in 95 % yield and in a 35:65 ratio. Their ¹H and ¹³C NMR spectral signals were not sufficiently resolved in CDCl₃ solution to achieve their complete assignment, but this was possible in DMSO-d ₆ with the help of 2D-NMR techniques: NOESY for ¹H–¹H interactions and HSQC and HMQC experiments for ¹H–¹³C correlations. These aldehydes were used in the synthesis of novel β-phenylethylamines and NBOMe derivatives, which are undergoing biological evaluation.