Asymmetric photocycloaddition between furan and chiral alkyl glyoxylates

High-pressure mercury lamp irradiation of chiral alkyl glyoxylates [R(?)-menthyl,R(?)- andS(+)-2-octyl,R(?)-andS(+)-2, 2-dimethyl-3-butyl] with furan led to alkyl 2,7-dioxabicyclo-[3.2.0] hept-3-ene-6-car?ylates (13a–e) exhibiting low (2.5–7.3%) optical purity. Compounds13a–e were isomerized to alkyl 3-furylglycolates (14a–e) in good yield. ConfigurationS was assigned to levorotary methyl 3-furlymethoxyacetate. Two interpretations of the results of asymmetric synthesis were proposed.     

光学活性N,N-二烷基-β-氨基醇硼烷配合物对酮的不对称还原反应

从天然氨基酸出发制得的九种新的光学活性N,N-二烷基-β-氨基醇,分别与硼烷反应生成相应的手性恶唑硼烷配合物并将其用于不对称还原反应中. 硼烷-手性恶唑硼烷-还原体系能将脂肪酮和芳香酮还原为仲醇, 化学还原收率可达100%,光学收率也比较高.并简单讨论了立体效应, 反应温度和溶剂效应对此还原反应的影响.     

Asymmetric synthesis by chiral cobalt catalysts: Homogeneous reduction of ketones to optically active alcohols

The hydrogenation of ketones with Co₂(CO)₆(PR₃)₂ (PR₃ = PPh₂-neomenthyl, PPh₂ -6-deoxo-1,2:3,4-diisopropylidene d-galactose and PMe₂ -menthyl) as catalysts gives optically active alcohols in optical yields of 1.6 to 5%.     

Asymmetric proliferation with optically active polyanilines

Thin optically active polyaniline layers have been shown to function as platforms to induce optical activity in polyanilines (containing achiral dopants) that are formed by subsequent electrodeposition.     

Asymmetric total synthesis of optically active α-curcumene

(R)-(?)-α-Curcumene has been prepared in 66% optical yield and in 34% overall yield in five steps by means of asymmetric Grignard cross-coupling reaction catalyzed by a nickel complex of chiral (aminoalkylferrocenyl)phosphine as a key carbon-carbon bond forming step.     

Asymmetric skeletal rearrangement of symmetrically alpha,alpha-disubstituted alpha-amino aldehydes: a new entry to optically active alpha-hydroxy ketones

A unique asymmetric skeletal rearrangement of symmetrically alpha,alpha-disubstituted alpha-amino aldehydes has been accomplished for the first time using a chiral organoaluminum Lewis acid 1. For instance, treatment of (S)-2,2'-bis(trifluoromethanesulfonylamino)-1,1'-binaphthyl with Me3Al (1.0 equiv) in toluene at room temperature for 15 min and at 110 degrees C for an additional 15 min produced (S)-1, and a subsequent reaction with alpha -amino aldehyde 2a (R = CH2Ph) at -78 degrees C for 4 h and at -40 degrees C for 12 h resulted in the smooth rearrangement to the zwitterionic iminium intermediate A, which furnished the alpha-hydroxy ketone 3a (R = CH2Ph) in 93% isolated yield with 95% ee (S) after acidic hydrolysis. This result, together with other representative examples, clearly demonstrates the effectiveness of the present method for the hitherto difficult asymmetric synthesis of acyloins. Furthermore, we found that the treatment of the in situ generated A with DIBAH afforded the corresponding anti amino alcohol exclusively without loss of enantiomeric excess. Our approach casts light on the previously unexplored yet potential utility of alpha-amino aldehydes as synthetic building blocks and also provides a new entry to optically active alpha-hydroxy ketones and 1,2-amino alcohols.     

Asymmetric reduction of aromatic and hetero cyclic ketones by hydrosilylation and hydrogen transfer in the presence of optically active rhodium catalysts

A study has been made of enantioselective hydrosilylation and reduction, by hydrogen transfer, of prochiral alkyl phenyl ketones or alkyl hetaryl ketones over various optically active catalysts. A total of 14 aromatic and heterocyclic carbinols were synthesized with preparative yields of 54–100%. The most effective catalytic systems were found to be complexes of RhCl₃ and [Rh(cod)Cl]₂ with the known optical inductor (S,S)-i-Pr-Pybox, with which we have obtained for the first time a series of heterocyclic secondary alcohols with an enantioselectivity of 20–63%.Latvian Institute of Organic Synthesis, Riga, LV-1006. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 3, pp. 342–358, March, 1996. Original article submitted December 11, 1995.     

Asymmetric anionic polymerization of optically active N-1-cyclohexylethylmaleimide

Chiral (S)-(−)-N-1-cyclohexylethylmaleimide [(S)-CEMI] and (R)-(+)-N-1-cyclohexylethylmaleimide [(R)-CEMI] were synthesized successfully and then polymerized with chiral complexes of (−)-sparteine or (S,S)-(1-ethylpropylidene)bis(4-benzyl-2-oxazoline) [(S,S)-Bnbox] and organometal as initiators in toluene or tetrahydrofuran to obtain optically active polymers. The effects of the polymerization conditions on the optical activity and structure of poly(N-1-cyclohexylethylmaleimide)s were investigated with gel permeation chromatography, circular dichroism, specific rotation, and ¹³C NMR measurements. Poly[(R)-CEMI] obtained with dimethylzinc (Me₂Zn)/(S,S)-Bnbox had the highest specific rotation ([α]₄₃₅ = +323.7°). Complexes of Bnbox and diethylzinc or Me₂Zn were used very effectively as chiral initiators for the asymmetric anionic polymerization of (S)-CEMI and (R)-CEMI. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4682–4692, 2004     

Asymmetric polymerization of N-vinylcarbazole with optically active anionic initiators

The anionic polymerization of N-vinylcarbazole(NVC) by using optically active anionic initiators such as the lithium salts of(S)-1-(9H-fluoren-2-yl)-4-isopropyl-4,5-dihydrooxazole((S)-1-FIDH) and(S)-2-(9H-fluoren-2-yl)-4-isopropyl-4,5-dihydrooxazole((S)-2-FIDH) and complexes of(-)-Sparteine with n-butylithium(n-Bu Li-(-)-Sp) or fluorenyl lithium(FILi-(-)-Sp) was achieved. The yield and specific rotation of poly(N-vinylcarbazole)s(poly(NVC)s) were considerably affected by the molar ratio of(S)-FIDH to NVC. The highest yield and specific rotation were obtained with Li-(S)-1-FIDH as an initiator, with a molar ratio of monomer and initiator [M]/[I] = 10/1. The effects of the chiral initiators, type of solvent and the polymerization temperature were investigated. The obtained optical activity of polymers was attributed to asymmetric induction of the chiral initiators.     

Asymmetric oxidation of prochiral selenides to optically active selenoxides

Oxidation of 1,1-diphenyl-1-methoxy-2-phenylselenylethane and of 1,1-diphenyl-1-methoxy-2-(o-methoxy)phenylselenylethane with the Sharpless reagent afforded the corresponding selenoxides with moderate optical yields.     

Synthesis of optically active amino ketones from (s)-serine

The oxazoline-protected (S)-serine methyl ester 2 can be coupled with various organolithio compounds to give the corresponding ketones 4a-d in good yield without racemisation.     

Asymmetric synthesis of optically active tricarbonyliron complexes of 1,3-dienes

Asymmetric coordination of prochiral 1,3-dienes to form optically active (diene)Fe(CO)₃ complexes has been achieved by direct transfer of the Fe(CO)₃ group from chiral enone complexes.     

Asymmetric polymerization of triphenylmethyl methacrylate by optically active anionic catalysts

Triphenylmethyl methacrylate (TrMA) was polymerized with two types of asymmetric anionic catalyst, lithium (R)-N-(1-phenylethyl)anilide (LiAn) and (-)-sparteine–butyllithium complex (Sp–BuLi), at ?78°C. Both catalysts yielded optically active polymers. The polymers obtained with LiAn in toluene and tetrahydrofuran (THF) showed specific rotations [α] of from ?50° to ?90° (in THF). The [α] of the polymer obtained with Sp–BuLi in toluene was positive and increased with polymer yield reaching above +300°s, whereas the polymer obtained in THF showed a low [α] (ca. +7°). Gel permeation chromatograms of both polymers obtained with LiAn and Sp–BuLi in THF exhibited rather narrow molecular weight distributions, whereas those obtained in toluene showed at least two or three components with markedly different molecular weights. The circular dichroism (CD) spectrum of the polymer obtained with Sp–BuLi showed strong positive peaks at 208 and 232 nm and a weak band at 250–280 nm; the polymer produced with LiAn showed a similar spectrum with opposite sign. The poly(methyl methacrylate)s derived from these poly(TrMA)s were highly isotactic but showed negligible rotations ([α] ± 2° in toluene). The polymer of high molecular weight showed clear polarization under a polarizing microscope and the low polymer obtained with LiAn appeared to show flow birefringence in chloroform at room temperature.     

Asymmetric polymerization of aromatic isocyanates with optically active anionic initiators

The asymmetric anionic polymerization of o-, m-, and p-methylphenyl isocyanates, p-methoxyphenyl isocyanate, p-chlorophenyl isocyanate, 2,6- and 3,4-dimethylphenyl isocyanates, and 1-naphthyl isocyanate was carried out using chiral anionic initiators such as the lithium salts of (?) -menthol, (?) -(2-methoxymethyl) pyrrolidine, and (+) -1-(2-pyrrolidinylmethyl) pyrrolidine. Although o-methylphenyl isocyanate gave an insoluble polymer and 2,6-dimethylphenyl isocyanate afforded no polymer, the other monomers gave soluble polymers, which showed optical activity due to the prevailing helicity of the polymer chain induced by chiral initiator residues attached to the α-end of the polymer chain. The molecular mechanics conformational calculation for a tetramer of m-methylphenyl isocyanate supported the helical conformation of the main chain. The optical rotation of the polymers depended significantly on temperature. © 1994 John Wiley & Sons, Inc.