Blood compatibility of polyurethane surface grafted copolymerization with sulfobetaine monomer

Surface modification is an effective way to improve the hemocompatibility and remain bulk properties of biomaterials. Recently, polymer tailed with zwitterions was found having good blood compatibility. In this study, the grafting copolymerization of sulfobetaine onto polyurethane surface was obtained through two steps. In the first step, polyurethane film coupled with vinyl groups was obtained through the reaction between the carboxyl group of acrylic acid (AA) and the NH-urethane group of polyurethane by dicyclohexylcarbodiimide (DCC). In the second step, sulfobetaine was grafted copolymerization on the surface using AIBN as an initiator. The reaction process was monitored with ATR-IR spectra and X-ray photoelectron spectroscopy (XPS) spectra. The wettability of films was investigated by water contact angle measurement. The blood compatibility of the grafted films was evaluated by platelet adhesion in platelet rich plasma (PRP) and protein absorption in bovine fibrinogen (BFG). Low platelet adhesion was observed on the grafted films incubated in PRP for 1 and 3 h, respectively. The protein absorption was reduced on the grafted films after incubated in bovine fibrinogen for 2 h. All of these results revealed that the improved blood compatibility was obtained by grafting copolymerization with zwitterionic monomer of sulfobetaine onto polyurethane film. In addition, introducing vinyl groups onto surface through DCC and AA is a novel method to functionalize polyurethane for further modification.     

GRAFTING OF SULFOBETAINE ONTO A POLYURETHANE SURFACE TO IMPROVE BLOOD COMPATIBILITY

On the molecular level, it is believed that polymers containing zwitterionic structures should be compatible withblood. In this work polyurethane films were grafted with sulfobetaine by a three-step procedure. In the first step, the films'surfaces were treated with hexamethylene diisocyanate (HDI) in toluene at 50℃ in the presence of di-n-butyl tin dilaurate(DBTDL) as a catalyst. The extent of the reaction was monitored by ATR-IR spectra; a maximum number of free NCOgroups was obtained after a reaction time of 90 min. In the second step, the hydroxyl groups of N,N-dimethylethylethanolamine (DMEA) were allowed to react in toluene with NCO groups bound on the surface. In the thirdstep, sulfobetaines were formed on the surface through the ring-opening reaction between tertiary amine of DMEA and 1,3-propanesultone (PS). The surfaces of the films were characterized by ATR-IR and XPS showing that the grafted surfaceswere composed of sulfobetaine. The results of the contact angle measurement show that the surface was strongly hydrophilic.The platelet adhesion test demonstrated that the films grafted with sulfobetaine have excellent blood compatibility.     

Platelet adhesive resistance of polyurethane surface grafted with zwitterions of sulfobetaine

A possible approach to improve the blood compatibility of poly(etherurethane)s (PU) involves the covalent attachment of key molecular on its surface. Recently, polymer tailed with zwitterions was found having good blood compatibility. The purpose of present study was to design and synthesis a novel nonthrombogenic biomaterial by modifying the surface of poly(etherurethane) with zwitterions of sulfobetaine via HDI spacer. The films of polyurethane were grafted with sulfobetaine by a three-step procedure. In the first step, the film surfaces were treated with hexamethylene diisocyanate (HDI) in toluene at 50 degrees C in the presence of di-n-butyl tin dilaurate(DBTDL) as a catalyst. The extent of the reaction was measured by ATR-IR spectra; a maximum number of free NCO group was obtained after a reaction time of 2.5 h. In the second step, the primary amine group of N,N-diethylethylenediamine (DEA) or N,N-dimethylethylenediamine (DMA) was allowed to react in toluene with isocyanate groups bound on surface. In the third step, two kinds of sulfobetaines were formed in the surface through the ring-opening reaction between tertiary amine of DMA or DEA and 1,3- propanesultone (PS). The reaction process was monitored with ATR-IR spectra and XPS spectra. The wettability of films was investigated by water contact angle measurement. A platelet adhesion experiment was conducted as a preliminary test to confirm the improved blood compatibility of PU. The number of platelets adhering to PU decreased greatly compared to original after 1 h and 3 h of contact with human plate-rich plasma.     

Research and synthesis of organosilicon nonthrombogenic materials containing sulfobetaine group

A novel organosilicon sulfobetaine was synthesized through the reaction of organosilicon containing tertiary amino with 1,3-propanesulfone. Then this organosilicon sulfobetaine was coated onto polyurethane and organosilicon surface to improve their blood compatibility. The existence of sulfobetaine structure on the surface of materials was revealed by ATR-FTIR and XPS. The thermo-capability of synthesized silicone rubber, containing sulfobetaine was revealed by TGA. The blood compatibilities of organosilicon sulfobetaine and other materials such as silicone and PU as reference coated with them were evaluated by platelet-rich plasma adhesion experiment. The novel segmented silicone rubber containing sulfobetaine structure showed perfect blood compatibility.     

Surface modification of SPEU films by ozone induced graft copolymerization to improve hemocompatibility

Surface modification of segmented poly(ether urethane) (SPEU) by graft copolymerization with N,N′-dimethyl-N-methacryloyloxyethyl-N-(3-sulfopropyl) ammonium (DMMSA), a zwitterionic sulfobetaine structure, was conducted. A simple two-step procedure for grafting of DMMSA onto the surface of SPEU film was used. The surface was first treated with ozone to introduce active hydroperoxide groups. The active surface was then exposed to the DMMSA solution in the sealed tube. Grafted SPEU film was characterized by ATR–FTIR, XPS and contact angle measurement. ATR–FTIR and XPS investigations confirmed the graft copolymerization. The monomer concentration, copolymerization temperature and time were varied to maximize the efficiency of DMMSA grafting. The equilibrium water content (EWC) and contact angle measurements showed that the hydrophilicity of the film had been greatly improved. The blood compatibility of the grafted films was evaluated by platelet adhesion in platelet rich plasma (PRP), deposits in blood control and protein adsorption in bovine fibrinogen using SPEU film as the control. No platelet adhesion and no thrombus were observed for the grafted films incubated in PRP for 300 min and in blood for 120 min, respectively. The protein adsorption was reduced on the grafted films after incubation in bovine fibrinogen for 120 min. These results proved that improved blood compatibility was obtained by grafting this new zwitterionic sulfobetaine structure monomer onto SPEU film.     

Novel photoinduced grafting-chemical reaction sequence for the construction of a glycosylation surface

Carbohydrates play a major role in many recognition events, such as blood coagulation, immune response, fertilization, cell growth, embryogenesis, and cellular signal transfer, which are essential for the survival of living entities. Synthetic carbohydrate-based polymers, so-called glycopolymers, are emerging as important well-defined tools for investigating carbohydrate-based biological processes and for simulating various functions of carbohydrates. In this work, we present a facile strategy for the formation of glycopolymer tethered on polypropylene microporous membrane surface. Acrylamide was grafted onto the polypropylene microporous membrane surface by photoinduced graft polymerization in the presence of benzophenone. The amide groups of grafted poly(acrylamide) were then transformed to primary amine groups by the Hofmann rearrangement reaction. Quantificational evaluation of the rearrangement reaction was carried out by ninhydrin method and mass weighting. Sugar moieties were coupled with the grafted functional layer to form glycopolymer by the reaction between primary amine groups and carbohydrate lactones. The grafting of acrylamide, the conversion of amide groups to amine groups, and the coupling of sugar moieties were confirmed by Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy combined with surface morphology observation by scanning electron microscopy.     

血液相容生医材料的合成研究15——苯乙烯型磺酸铵内盐单体的合成及其聚合物的抗血小板粘附性能

两性离子不凝血生物材料;血液相容生医材料的合成研究15——苯乙烯型磺酸铵内盐单体的合成及其聚合物的抗血小板粘附性能     

Enhanced mechanical properties of carbon fiber composites by grafting different structural poly(amido amine) onto fiber surface

The mechanical properties of carbon fiber composites depend on the interfacial strength between fiber and epoxy matrix. Different poly (amido amine) (PAMAM) dendrimers were grafted onto carbon fiber to improve the interfacial strength of the resulting composites. Functional groups on the carbon fiber surface were examined by X-ray photoelectron spectroscopy. The surface morphology of the resulting materials was characterized by scanning electron microscopy and atomic force microscope. The characterization results revealed that PAMAM dendrimers were chemically grafted onto the surface of carbon fiber. More importantly, the mechanical properties of the resulting composites were enhanced owing to the presence of sufficient functional groups on the carbon fiber surface. In addition, after PAMAM containing chair conformations were grafted, the interlaminar shear strength had the highest increase of 53.13%, higher than that of the fiber grafted with PAMAM containing terminated linear amine. This work provides an alternative approach to enhance the mechanical properties of fiber composites by controlling the interface between fiber and epoxy matrix.     

Polyurethane vascular catheter surface grafted with zwitterionic sulfobetaine monomer activated by ozone

Polyurethane (PU) is a conventional biomedical material with favorable biocompatibility and excellent mechanical properties and widely used in making vascular catheter, but its antithrombogenic property is not good enough to make it as a more demanding applicable biomaterial. Surface modification is an effective way to improve the hemocompatibility for biomaterials. The purpose of present study was to use ozonization method to modify the surface of PU vascular catheter slice to improve its antithrombogenicity by grafting N,N-dimethyl-N-methacryloxyethyl-N-(3-sulfopropyl) ammonium (DMMSA), a zwitterionic sulfobetaine monomer. PU vascular catheter (PUVC) grafted with DMMSA (PUVC-g-PDMMSA) was characterized by ATR-FTIR and XPS. ATR-FTIR and XPS investigation confirmed the graft polymerization. The blood compatibility of the grafted films was evaluated by platelet rich plasma (PRP) platelet adhesion study and scanning electron microscopy (SEM) was used to observe the morphology of platelet using PU vascular catheter (PUVC) as the reference. No platelet adhesion was observed for the grafted PUVC slice incubated with PRP at 37 degrees C for 120 min. It is significant that this new zwitterionic sulfobetaine grafted PUVC have improved antithrobogenicity. It is effective that the inner surface of vascular catheter with inner diameter in only 3mm can be grafted with PDMMSA by using ozonization method.     

Chemical graft polymerization of sulfobetaine monomer on polyurethane surface for reduction in platelet adhesion

Surface modification is an effective way to improve the hemocompatibility and remain bulk properties of biomaterials. Recently, polymer tailored with zwitterions was found having good blood compatibility. In this study, the zwitterionic monomer of sulfobetaine was graft polymerized onto polyurethane (PU) surface in a three-step heterogenous system through the vinyl bonds of acrylic acid (AA) or hydroxyethyl methacrylate (HEMA), which was immobilized with hexamethylene diisocyanate (HDI) beforehand. First, PU was activated with isocyanate groups using HDI as coupling agent. Second, AA or HEMA was introduced through reaction of AA or HEMA with NCO groups bonded on PU surface. Last, zwitterionic monomer of sulfobetain was graft polymerized with vinyl group of AA or HEMA using AIBN as polymerization initiator. The reaction process was monitored with ATR-IR spectra and XPS spectra. Variation of graft yield with temperature and monomer feed concentration was investigated and feasible conditions were optimized. The wettability of films was investigated by water contact angle measurement and water absorbance. Platelet adhesion experiment was conducted as a preliminary test to confirm the improved blood compatibility of PU. The number of platelets adhering to PU decreased greatly comparing with the originals after 1 and 3 h of contact with human plate-rich plasma (PRP).     

Analytical investigation of the chemical reactivity and stability of aminopropyl-grafted silica in aqueous medium

Various samples of aminopropyl-functionalized silica (APS) have been prepared by grafting an organosilane precursor 3-aminopropyl-triethoxysilane (APTES) onto the surface of silica gel. The amine group content of the materials has been adjusted by varying the amount of APTES in the reaction medium (toluene). The grafted APS solids have been characterized with using several analytical techniques (N₂ adsorption, X-ray photoelectron spectroscopy, infrared spectrometry) to determine their physico-chemical properties. Their reactivity in aqueous solutions was studied by acid-base titration, via protonation of the amine groups, and by way of complexation of these groups by Hg^II species. APS stability in aqueous medium was investigated at various pH and as a function of time, by the quantitative analysis of soluble Si- or amine-containing species that have been leached in solution upon degradation of APS. The chemical stability was found to increase when decreasing pH below the pK_a value corresponding to the RNH₃⁺/RNH₂ couple, but very low pH values were necessary to get long-term stability because of the high local concentration of the amine groups in the APS materials. Adsorption of mercury(II) ions on APS was also performed to confirm the long-term stability of the grafted solid in acidic medium. Relationship between solution pH and APS stability was discussed. For sake of comparison, the stability of APS in ethanol and that of mercaptopropyl-grafted silica (MPS) in water have been briefly considered and discussed with respect to practical applications of silica-based organic–inorganic hybrids, e.g., in separation science or in the field of electrochemical sensors.     

An electrochemical immunosensor based on covalent immobilization of okadaic acid onto screen printed carbon electrode via diazotization-coupling reaction

In this work, an electrochemical method based on the diazonium-coupling reaction mechanism for the immobilization of okadaic acid (OA) on screen printed carbon electrode was developed. At first, 4-carboxyphenyl film was grafted by electrochemical reduction of 4-carboxyphenyl diazonium salt, followed by terminal carboxylic group activation by N-hydroxysuccinimide (NHS), N-(3-dimethylaminopropyle)-N′-ethyle-carbodiimide hydrochloride (EDC). Hexamethyldiamine was then covalently bound by one of its terminal amine group to the activated carboxylic group. The carboxyl group of okadaic acid was activated by EDC/NHS and then conjugated to the second terminal amine group on other side of the hexamethyldiamine through amide bond formation. After immobilization of OA, an indirect competitive immunoassay format was employed to detect OA. The immunosensor obtained using this novel approach allowed detection limit of 1.44 ng/L of OA, and was also validated with certified reference mussel samples.     

Method for grafting poly(acrylic acid) onto nylon 6,6 using amine end groups on nylon surface

Several methods have been developed for grafting materials to the surface of polymers to alter their surface characteristics. This article reports a procedure for grafting poly(acrylic acid) (PAA) onto nylon 6,6 films via the naturally occurring amine end groups of nylon 6,6 using N‐hydroxy‐succinimide in conjunction with 1‐ethyl‐3‐ (3‐dimethylaminopropyl)carbodiimide hydrochloride (EDC) facilitated amidazation. Reaction conditions were investigated with respect to PAA molecular weight, activator concentrations, reaction temperature, and time. X‐ray photoelectron spectroscopy showed that surface coverage of more than 50% was consistently achieved for 250 kD PAA. The maximum grafting occurred at room temperature with a large excess of EDC with a reaction time of 30 min. The same level of grafting can be achieved using smaller amounts of EDC at 60 °C. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 719–728, 2002; DOI 10.1002/pola.10149     

A mild photoactivated hydrophilic/hydrophobic switch

Surface modification using light is one of the most powerful methods for controlling the physical and chemical properties offunctionalized surfaces. In this paper, we report on systems where soft UV irradiation (lambda = 365 nm) converts a "low" activity fluorocarbon to a "high" activity amine-functionalized surface. An amine-functionalized SAM (self-assembled monolayer) is first masked using a tertiary amine catalyzed reaction with an N-hydroxysuccinimidyl carbonyl reagent. This mild, room-temperature reaction introduces a hydrophobic photocleavable nitrobenzyl "protecting group" terminated with a fluorocarbon end-chain. UV irradiation (lambda = 365 nm) of this hydrophobic/fluorocarbon surface cleaves the nitrobenzyl residue, returning the surface to the original hydrophilic/amine-functionalized state. This provides a mild, generic method of producing surfaces with hydrophilic/hydrophobic patterns or patterned with amine functional residues. Two different protecting groups, one terminated with a single and the other with three fluorocarbon end chains, are compared. In the case of the more bulky protecting group, only a small proportion of the amine residues react, but the surface is equally hydrophobic and the amine residues equally well shielded from further reaction. Surfaces are characterized by X-ray photoelectron spectroscopy, ellipsometry, surface potential, and contact angle measurements. Images of the photopatterned SAMs were obtained using scanning electron microscopy.     

超声波技术制备功能化二氧化硅在苯酚和碳酸二甲酯甲基化反应中的应用

Porous silica modified with -（CH2）3NH2 （primary amine）, -（CH2）3NHCH2CH2NH2 （secondary/primary amine） and -（CH2）3N-cycl-（CH2）4 （tertiary amine） were synthesized by ultrasonic technique under mild conditions. The samples were characterized by BET, elemental analysis and TG, showing that the organosilane moieties were grafted onto the surface of porous silica by covalent bond. The structure of the organosilane moieties and ultrasonic treatment time were all significant for the quantities of grafted amino groups. The samples exhibited promising catalytic properties towards the methylation reaction of phenol with dimethyl carbonate （DMC）. The methylation reaction with the modified samples featured high selectivity at high conversion. The samples were subjected to utilization for a few recycles without obvious loss of activity to indicate that ultrasonic technique was effective for the preparation of organically modified porous silica catalysts.     

Surface-grafting of phosphates onto a polymer for potential biomimetic functionalization of biomaterials

In the human body, phosphate groups play important roles in signaling and the biological functions of proteins and peptides. Despite the importance of phosphate groups, polymer surfaces have not been directly grafted with phosphate groups by chemical reactions because the usual organic solvents used to graft phosphate groups can dissolve or swell polymers. We focused this study on grafting phosphate groups onto a poly(ethylene-co-acrylic acid) (PEAA) surface in an aqueous solution. O-phospho L-serine and O-phosphoethanolamine were grafted on PEAA surfaces to introduce phosphate groups by activating carboxylic acid groups of PEAA using N-hydroxysuccinimide (NHS) and 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide (EDC) in an aqueous environment. X-ray photoelectron spectroscopy (XPS) was used to elucidate the process by which surface grafting occurs and the process that the phosphate group is cleaved into a phosphate ion and a hydrolyzed molecule at high pH. It was found that under appropriate reaction conditions the phosphate groups could be successfully grafted on the polymer surfaces. The phosphate-grafted polymer surfaces showed lower water contact angles than the initial polymer surfaces likely due to their highly mobile and hydrophilic phosphate side groups. This work demonstrates a technique to successfully graft phosphate groups onto organic polymer surfaces in a biocompatible aqueous environment, which may open new avenues to functionalizing synthetic polymeric and natural macromolecule derived biomaterials.     

Surface grafted sulfobetaine polymers via atom transfer radical polymerization as superlow fouling coatings

One of the sulfobetaine methacrylate (SBMA) monomers, N-(3-sulfopropyl)-N-(methacryloxyethyl)-N,N-dimethylammonium betaine, was polymerized onto initiator-covered gold surfaces using atom transfer radical polymerization (ATRP) to form uniform polymer brushes. Self-assembled monolayers (SAMs) with ATRP initiators were characterized by X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM). The thickness of grafted poly(SBMA) films was measured by ellipsometry. Fibrinogen adsorption on poly(SBMA) grafted surfaces was measured with a surface plasmon resonance (SPR) sensor. Two approaches were compared to graft ATRP initiators onto gold surfaces for surface polymerization and subsequent protein adsorption on these polymer grafted surfaces. The first was to prepare a SAM from omega-mercaptoundecyl bromoisobutyrate onto a gold surface. Superlow fouling surfaces with well-controlled poly(SBMA) brushes were achieved using this approach (e.g., fibrinogen adsorption <0.3 ng/cm2). The second approach was to react bromoisobutyryl bromide with a hydroxyl-terminated SAM on a gold surface. Although protein adsorption decreased as the density of surface initiators increased, the surface prepared using the second approach was not able to achieve as low protein adsorption as the first approach. Key parameters to achieve superlow fouling surfaces were studied and discussed.     

Surface modification using photocrosslinkable chitosan for improving hemocompatibility

Immobilization of the anticoagulative or antithrombogenic biomolecule has been considered as one of the important methods to improve the blood compatibility of artificial biomaterials. In this study, a novel immobilization reaction scheme was utilized to incorporate O-butyrylchitosan (OBCS) onto the activated glass surface with an aim to develop an anticoagulative substrate. Activation of the glass surface was carried out by silanization and then OBCS was grafted to the silanized surface via a radiation grafting technique. The OBCS-grafted glass surfaces were characterized by electron spectroscopy for chemical analysis (ESCA) and atomic force microscopy (AFM). The blood compatibility of the OBCS-grafted glass was evaluated by platelet rich plasma (PRP) contacting experiments and protein adsorption experiments in vitro. These results have demonstrated that the surface with immobilized OBCS shows much less platelet adhesive and fibrinogen adsorption compared to the control surface. Therefore, the novel reaction scheme proposed here is very promising for future development of an anticoagulative glass substrate.     

Modification of carbon electrode with aryl groups having an aliphatic amine by electrochemical reduction of in situ generated diazonium cations

The electrochemically induced functionalization of glassy carbon electrode by aryl groups having an aliphatic amine group was achieved by reduction of in situ generated diazonium cations in aqueous media. The corresponding diazonium cations of 4-aminobenzylamine, 2-aminobenzylamine, 4-(2-aminoethyl)aniline, N-methyl-1,2-phenylenediamine, and N, N-dimethyl- p-phenylenediamine were generated in situ with sodium nitrite in aqueous HCl. The kinetics of electrochemical grafting were investigated with electrochemical impedance spectroscopy and electrochemical quartz crystal microbalance measurements (with carbon-coated quartz crystal), and the barrier properties of the grafted layers were evaluated by cyclic voltammetry in the presence of electroactive redox probes such as Fe(CN)6 3-/4- and Ru(NH 3)6 (3+). The grafting efficiency of aryl groups was found to depend on the nature of the amine (primary, secondary, and tertiary), the chain length of the alkyl substituent, and the substitution position on the aromatic ring. The nitrosation of the "aliphatic" amine, in the case of secondary and tertiary amines, was also evidenced by X-ray photoelectron spectroscopy.     

细胞相容性聚氨酯的合成及其细胞相容性研究

在紫外光和过氧化氢的共同作用下,过氧化氢基团被引人到聚氨酯膜(PU)表面.将丙烯酸羟乙酯(HEA)吸附于氧化后的PU膜表面,在紫外光下实现了膜表面的接枝,并考察了接枝膜的表面性能.人体脐带静脉内皮细胞粘附和生长的研究表明,HEA接枝后的PU表面细胞粘附率显著提高,细胞的生长速率加快,增值率提高.