基于正弦和三角波条纹投影的三维测量方法

在现有的针对复杂物体表面形貌的三维测量方法中, 为了完成绝对相位的测量, 通常需要处理至少6幅条纹图像, 限制了测量速度。提出了采用2幅正弦条纹和2幅三角波条纹图来获得物体三维形貌的方法。利用两步相移正弦条纹和两步相移三角条纹得到截断相位, 再利用两步相移三角波条纹得到条纹级次, 减少了投影条纹幅数, 提高测量速度。在得到条纹级次时, 计算三角波条纹强度调制和强度对比度, 与计算相位相比, 可以减少数据处理的时间, 进一步提高测量速度, 同时能减小物体表面反射率的影响, 提高了测量精度。测量最大高度为39 mm的阶梯状标准块, 得到的最大绝对误差和最大的RMS误差分别为0.045 mm和0.041 mm。验证了该方法的有效性和实用性, 在高速实时的复杂形貌三维测量中有广泛的应用前景。     

一种快速获取物体三维形貌和纹理信息的算法

提出了一种新的快速获取物体三维形貌和纹理信息的方法。利用数字投影仪将2幅彩色编码的正弦相移光栅图投影到被测物体表面,彩色相机捕捉经物体调制后的变形条纹图。提取RGB三基色,可获得包含物体高度信息及纹理信息的条纹图和背景光。对包含物体高度信息的条纹图用改进的2+1相移算法重构物体的三维形貌。物体纹理信息则通过对背景光进行彩色编码获得,利用纹理映射技术恢复物体纹理。计算机模拟和实验结果验证了该方法的有效性和可行性。     

一种三维变形光学测量系统及微结构力学性能测试应用

描述了一种使用显微栅线投影技术和数字图像相关技术同时测量微结构三维形貌和变形的光学测量系统.在此系统中,正弦栅线通过相移投影器投影到被测物体表面,变形的条纹图由高分辨率的CCD相机和显微镜头采集并保存.相移技术处理条纹图得到形貌和离面变形,同时从相移图像中提取出被测物表面纹理,数字图像相关技术处理变形前后表面纹理得到面...     

条纹投影法中抗噪声干扰的相移编码去包裹方法

相位去包裹问题广泛存在于条纹投影形貌测量中。提出了一种相移编码去包裹方法,该方法在求解相位时使用多步相移法,并在额外的一幅编码图像中,将标记条纹级数的编码嵌入到相移量中。解码时,通过分析各像素点处不同相移的光强信息序列,可以求解该点处的编码相移量,从而获得绝对相位。该方法只需要少量图像,且可以逐点去包裹,适用于不连续物体的形貌测量,但是容易受到投影仪和相机的噪声影响。通过增加互补的编码条纹图像,提出了一种改进的相移编码去包裹方法,在实现不连续物体形貌测量的同时,显著增强了噪声鲁棒性。经过仿真分析和实验,验证了所提的相移编码去包裹方法的有效性。     

用于三维测量的快速相位解包裹算法

减少条纹投影轮廓术的条纹图数量一直是本领域的研究热点。传统的时间相位解包裹算法,一般需要额外的条纹信息来确定条纹级次,导致条纹图数量过多。提出一种用于三维测量的快速相位解包裹算法,只需要N步标准相移正弦条纹图,就可以完成绝对相位的计算。首先,利用标准相移算法计算包裹相位和消除背景的掩膜;然后,直接利用包裹相位和掩膜,根据连通域标记算法计算条纹级次,进而求得绝对相位。该方法最少只需3幅条纹图,就可以完成三维测量,数据处理速度快。计算机仿真和实验结果验证了该方法的有效性和鲁棒性。     

单幅对称变形相位图分离二维变形分量的相移电子散斑干涉技术

提出了利用相移电子散斑干涉测量物体二维变形分量的方法.单光束照明的传统电子散斑干涉技术,测量得到的是一幅物体变形的混合相位场.当物体具有对称变形时,可由这一幅相位图求得二维变形分量.方法是将该相位图镜像翻转得到第二幅相位图,通过二幅相位图的叠加、复位和分离运算,获得物体的二维变形场的分量值.利用三点加载的简支梁进行了实验,给出了实验结果,并与对称光照明实验结果进行了对比,验证了该方法的正确性.     

格雷码与六步相移编码融合的三维结构光学测量方法

编码结构光技术是一种获取复杂目标三维结构的典型测量技术,其将编码后的结构光图案投射到待测物体表面进行调制、采集,并通过解码计算三维面形数据,可见编码方法是结构光三维测量技术的核心问题。然而,通用的格雷码编码方法和六步相移编码方法都存在一定缺陷,为此,以获取物体的高精度三维点云数据为目标,提出了一种融合格雷码与六步相移的结构光技术。首先,将格雷码结构光设计为7幅黑白相间的条纹周期图像,并通过投射角度解码操作将图像划分为多个区域;然后,设计六步相移结构光为6幅具有相位差的余弦周期图像,通过相位解包裹操作将每个子区域细分到单个像素单元;最后,融合以上两种编码结构光解码值,计算图像内每个空间点的绝对相位信息。仿真实验与实际测试实验显示,与传统六幅莫尔条纹结构光技术相比,融合结构光技术计算量较小,同时也克服了单独使用格雷码或相移技术所存在的问题,能够以较高精度获取物体目标的三维结构细节,为基于结构光的双目三维扫描系统提供一定理论依据。     

利用散斑嵌入条纹和查找表进行三维面形测量

为了快速、准确地重建复杂场景的三维面形,提出了一种利用散斑嵌入相移条纹图案和截断相位-高度查找表的三维面形测量方法。将散斑作为辅助信号嵌入到四步相移条纹图案的相位分布中,得到待投影的复合条纹图案。利用相移算法解调出被测物体的截断相位和额外的散斑信息。利用查找表得到截断相位对应的多个候选高度,再利用散斑对条纹周期进行标记以解决高度歧义问题,唯一确定截断相位所对应的正确高度,以实现被测物体三维面形的快速重建。该方法直接从截断相位信息中重建三维面形,无需投影任何附加图案,也无需进行相位展开。理论分析和实验结果表明,该方法可以实现动、静态复杂场景三维形貌的高精度测量且鲁棒性好。     

单幅彩色条纹投影的不连续物体表面三维形貌测量

提出了基于单幅彩色条纹投影的不连续物体及动态三维形貌的测量方法。该方法利用计算机产生一幅正弦条纹图和两幅单一强度图分别通过红蓝绿三个通道合成为一幅彩色条纹图,由液晶投影仪投影到被测物体表面,彩色CCD采集变形条纹图并保存在计算机中。通过三色分离,同时获得正弦条纹图和反映表面反射率分布及背景信息图,通过图像除法运算及亚像素精度归一化处理实现物体三维形貌的恢复。对于表面形貌不连续的物体,利用蓝色分量的灰度图像进行二值化处理定位阴影或暗背景,从而引导正确的相位求解。实验验证了该方法对不连续物体动态测量方面的可行性。     

结合极线约束和散斑相关的实时三维测量方法

提出了一种结合极线约束和散斑相关的实时三维测量方法。该方法基于标准的三步相移法,向正弦条纹图像中嵌入额外的随机数字散斑,并结合左右相机之间的极限约束来确定每个像素点相位的周期数,最终利用3幅条纹图像实现无歧义的相位展开。实测结果表明,相比于传统信息嵌入法和多相机约束法,本文方法能够大幅提高绝对相位的求解正确率;同时,为了提高算法的运行效率,采用图形处理器并行计算架构对算法进行了优化;该系统成功实现了26frame/s单幅测量点数为94,163的实时动态三维测量。     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Hybrid Wavelength and Code Division Multiple Access in Optical Networks

A review of schemes for multiple access in fiber optic networks shows that a hybrid of wavelength and code division multiple access (WCDMA) combines the best features of both. In particular, the hybrid scheme retains the large information carrying capacity of wavelength division multiple access (WDMA) and flexibility of code division multiple access (CDMA). In this paper WDMA, optical CDMA (OCDMA), and WCDMA networks are discussed. In OCDMA networks, concept of incoherent and coherent coding including inverse decoding and matched filter is introduced. The delay performance of both WDMA and WCDMA networks, under the simple suboptimum access protocols based on cyclic search, is computed. It has been shown quantitatively that tuning delay significantly affects the delay performance of both WDMA and WCDMA networks. Futhermore, delay performance of WCDMA networks is always better than the WDMA networks for the same tuning delay, load, and number of users.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Femtosecond Transform-Limited Pulse Generation by Compensating for the Linear Chirp of SPM Spectra in Dispersion Shifted Fibers

A simple technique of pulse compression, based on the linear chirp compensation of self-phase modulation (SPM) spectra in dispersion shifted fibers, is demonstrated. The optimization procedure is carried out, for a short span of a single-mode fiber, using a parabolic law, which describes the behavior of the squared output pulse width versus the pump peak power in the case of Gaussian pulses. The experimental results give a minimum pulse duration of 233 fs, which is in good agreement with the model. Shorter and coherent pulses, down to 90 fs, have been obtained by inserting an interference filter at the optical output.     

Sorting of bending magnets for the SSRF booster

The Shanghai Synchrotron Radiation Facility(SSRF)booster ring,a full energy injector for the storage ring,is deigned to accelerate the electron beam energy from 150MeV to 3.5GeV that demands high extraction efficiency at the extraction energy with low beam loss rate when electrons are ramping.Closed orbit distortion(COD)caused by bending magnet field uniformity errors which affects the machine performance harmfully could be effectively reduced by bending magnet location sorting.Considering the affections of random errors in measurement,both ideal sorting and realistic sorting are studied based on measured bending magnet field uniformity errors and one reasonable combination of bending magnets which can reduce the horizontal COD by a factor of 5is given as the final installation sequence of the booster bending magnets in this paper.     

Measurement of nonlinear coefficient of optical fiber based on small chirped soliton transmission

We measure the waveform and phase curves of short optical pulses before and after transmission over different lengths of fibers by use of the pulse analyzer with the frequency-resolved optical gating (FROG),and numerically simulate pulse evolution under the experimental conditions.The nonlinear coefficient of the fiber is given by comparing the experimental results with the numerical ones.Difference between the experiment and numerical simulation is analyzed.     

Resonance scattering of canonical elastic shells in absorbing fluid medium

Resonance scattering of elastic spherical shell and cylindrical shell while the surrounding fluid medium has absorption is studied. The normal mode solution derived using exact elastic theory and the separation of variables is still applicable. However, the scattering form function has to be modified for the absorbing medium, otherwise the unreasonable result would be obtained. The backscattering form function in the absorbing medium is redefined, and the form function of elastic spherical and cylindrical shell with vacuum or solid matter filled is calculated in various absorption conditions. The results show that the absorption of surrounding fluid leads to notable attenuation of the coincidence resonances in the mid-frequency, but it has a little influence on the low-frequency resonance scattering induced by the filler inside the shell.     

Single-beam self-referenced phase-sensitive surface plasmon resonance sensor with high detection resolution

A versatile and low-cost single-beam self-referenced phase-sensitive surface plasmon resonance(SPR)sensing system with ultra-high resolution performance is presented.The system exhibits a root-mean-square phase fluctuation of ±0.0028.over a period of 45 min.i.e.a resolution of±5.2×10-9 refractive index units.The enhanced performance has been achieved through the incorporation of three design elements:a true single-beam configuration enabling complete self-referencing so that only the phase change associated with SPR gets detected,a differential measurement scheme to eliminate spurious signals not related to the sensor response,and the elimination of retardation drifts by incorporating temperature stabilization in the liquid crystal phase modulato .Our design should bring the detection sensitivity of non-labeling SPR biosensing closer to that achievable by conventional fluorescence-based techniques.     

Influences of SiO2 protective layers and annealing on the laser-induced damage threshold of Ta2O5 films

Ta2O5 films are prepared on BK7 substrates with conventional electron beam evaporation deposition.The effects of SiO2 protective layers and annealing on the laser-induced damage threshold (LIDT) of the films are investigated.The results show that SiO2 protective layers exert little influence on the electric field intensity(EFI)distribution,microstructure and microdefect density but increase the absorption slightly.Annealing iS effective on decreasing the microdefect density and the absorption of the films.Both SiO2 protective layers and annealing are beneficial to the damage resistance of the films and the latter is more effective to improve the LIDT.Moreover,the maximal LIDT of Ta2O5 films is achieved by the combination of SiO2 protective layers and annealing.