Characterization and methanol electrooxidation studies of Pt(111)/Os surfaces prepared by spontaneous deposition

Catalytic activity of the Pt(111)/Os surface toward methanol electrooxidation was optimized by exploring a wide range of Os coverage. Various methods of surface analyses were used, including electroanalytical, STM, and XPS methods. The Pt(111) surface was decorated with nanosized Os islands by spontaneous deposition, and the Os coverage was controlled by changing the exposure time to the Os-containing electrolyte. The structure of Os deposits on Pt(111) was characterized and quantified by in situ STM and stripping voltammetry. We found that the optimal Os surface coverage of Pt(111) for methanol electrooxidation was 0.7 +/- 0.1 ML, close to 1.0 +/- 0.1 Os packing density. Apparently, the high osmium coverage Pt(111)/Os surface provides more of the necessary oxygen-containing species (e.g., Os-OH) for effective methanol electrooxidation than the Pt(111)/Os surfaces with lower Os coverage (vs e.g., Ru-OH). Supporting evidence for this conjecture comes from the CO electrooxidation data, which show that the onset potential for CO stripping is lowered from 0.53 to 0.45 V when the Os coverage is increased from 0.2 to 0.7 ML. However, the activity of Pt(111)/Os for methanol electrooxidation decreases when the Os coverage is higher than 0.7 +/- 0.1 ML, indicating that Pt sites uncovered by Os are necessary for sustaining significant methanol oxidation rates. Furthermore, osmium is inactive for methanol electrooxidation when the platinum substrate is absent: Os deposits on Au(111), a bulk Os ingot, and thick films of electrodeposited Os on Pt(111), all compare poorly to Pt(111)/Os. We conclude that a bifunctional mechanism applies to the methanol electrooxidation similarly to Pt(111)/Ru, although with fewer available Pt sites. Finally, the potential window for methanol electrooxidation on Pt(111)/Os was observed to shift positively versus Pt(111)/Ru. Because of the difference in the Os and Ru oxophilicity under electrochemical conditions, the Os deposit provides fewer oxygen-containing species, at least below 0.5 V vs RHE. Both higher coverage of Os than Ru and the higher potentials are required to provide a sufficient number of active oxygen-containing species for the effective removal of the site-blocking CO from the catalyst surface when the methanol electrooxidation process occurs.     

Preoxidation of CO on Os-modified Pt(111): a comparison with Ru-modified Pt(111)

The variation in CO adsorption structures during the preoxidation of CO on Os-modified Pt(111) (Pt(111)/Os) was investigated using cyclic voltammetry and electrochemical scanning tunneling microscopy. The spontaneous deposition of Os on Pt(111) resulted in randomly scattered islands with a coverage range of 0.13-0.54. During preoxidation on Pt(111)/Os, a phase transition from (2 × 2)-α to (√19 × √19) via the transient structures of (2 × 2)-β and (1 × 1) took place as on unmodified Pt(111). As the amount of Os increased, however, the transient structures of (2 × 2)-β and (1 × 1) appeared at lower potentials with higher populations. When the population of the transient structures was greater than 50%, an oxidative CO stripping process took place to the structure of (√19 × √19), completing the preoxidation. These observations strongly support the idea that the presence of Os increases the mobility of adsorbed CO by electronic modification of the Pt(111) surface (electronic effect). In addition, the results obtained with Pt(111)/Os were compared with those of Pt(111)/Ru.     

Examination of Pt(111)/Ru and Pt(111)/Os surfaces: STM imaging and methanol oxidation activity

Ruthenium and osmium were deposited in submonolayer amounts on Pt(111) single crystal surfaces using the previously reported ‘spontaneous deposition’ procedure [Chrzanowski et al., Langmuir, 13 (1997) 5974]. Such surfaces were first explored using ex situ scanning tunneling microscopy (STM) to image the deposition characteristics of ruthenium and osmium islands on Pt(111). It was found that, using the spontaneous deposition procedure, a maximum coverage of 0.20 ML ruthenium is formed on the surface after 120 s of exposure to a RuCl₃ solution in 0.1 M HClO₄. A homogeneous deposition on the Pt(111) surface was found, with no observed preferential deposition on step edges or surface defect sites. In contrast, in the spontaneous deposition of osmium, osmium clusters form preferentially at, though not limited to, surface defect sites and step edges. Osmium island deposition occurs at a greater rate than ruthenium on Pt(111), and possible explanations are presented. Methanol activity on the Pt(111)/Ru and Pt(111)/Os surfaces is also studied, using the coverage values determined to yield the highest activity for methanol electro-oxidation (0.20 ML coverage for Ru and 0.15 ML for Os). At potentials more negative than 0.40 V vs. RHE, the Pt(111)/Ru surface yields a higher surface activity than Pt(111)/Os. However, at potentials more positive than 0.04 V, Pt(111)/Os exhibits demonstrably higher surface activity. The relevance of this data is discussed and future avenues of interest are indicated.     

Fabrication of monometallic (Co,Pd, Pt,Au) and bimetallic (Pt/Au,Au/Pt) thin films with hierarchical architectures as electrocatalysts

Co thin films with novel hierarchical structures were controllably fabricated by simple electrochemical deposition in the absence of hard and soft templates, which were used as sacrificial templates to further prepare noble metal (Pd, Pt, Au) hierarchical micro/nanostructures via metal exchange reactions. SEM characterization demonstrated that the resulting noble metal thin films displayed hierarchical architectures. The as-prepared noble metal thin films could be directly used as the anode catalysts for the electro-oxidation of formic acid. Moreover, bimetallic catalysts (Pt/Au, Au/Pt) fabricated based on the monometallic Au, Pt micro/nanostructures exhibited the higher catalytic activity compared to the previous monometallic catalysts.     

Decorated Ru/Au(111) and Os/Au(111) surfaces: An in situ STM and electrochemistry study

The structure and reactivity of bimetallic electrodes obtained by spontaneous deposition of Ru and Os on Au(111) single-crystal surfaces are studied. In situ electrochemical STM and cyclic voltammetry are used to characterize a wide range of surface morphologies thus produced. The STM results on Ru/Au(111) demonstrate a pronounced step decoration, while a random distribution of Ru nuclei, quite uniform in size, occurs on terraces. Osmium deposits show a slight preference for deposition on steps, but it also occurs readily on terraces. However, many of the Os islands grow into multilayer heights. The coverage of the Au(111) by the deposited Ru or Os islands for a particular solution concentration depends on the deposition time. Nanostructures of Ru and Os are tested for catalytic behavior and correlated to CO oxidation activity as measured by CO stripping voltammetry. Published in Russian in Elektrokhimiya, 2006, Vol. 42, No. 11, pp. 1385–1392. Based on the report delivered at the 8th International Frumkin Symposium “Kinetics of the Electrode Processes,” October 18–22, 2005, Moscow. The text was submitted by the authors in English.     

Electrocatalytic oxidation of formic acid and methanol on Pt deposits on Au(111)

This work presents characteristics of Pt deposits on Au(111) obtained by the use of spontaneous deposition and investigated by electrochemical scanning tunneling microscopy (EC-STM). On such prepared and STM characterized Au(111)/Pt surfaces, we studied electrocatalytic oxidation of formic acid and methanol. We show that the first monatomic layer of Pt displays a (square root 3 x square root 3)R30 degrees surface structure, while the second layer is (1 x 1). After prolonged deposition, multilayer Pt deposits are formed selectively on Au(111) surface steps and are 1-20 nm wide and one to five layers thick. On the optimized Au(111)/Pt surface, formic acid oxidation rates are enhanced by a factor of 20 compared to those of pure Pt(111). The (square root 3 x square root 3)R30 degrees-Pt yields very low methanol oxidation rates, but the rates increase significantly with further Pt growth.     

Platinum monolayer on nonnoble metal-noble metal core-shell nanoparticle electrocatalysts for O2 reduction

We synthesized a new class of O2 electrocatalysts with a high activity and very low noble metal content. They consist of Pt monolayers deposited on the surfaces of carbon-supported nonnoble metal-noble metal core-shell nanoparticles. These core-shell nanoparticles were formed by segregating the atoms of the noble metal on to the nanoparticles' surfaces at elevated temperatures. A Pt monolayer was deposited by galvanic displacement of a Cu monolayer deposited at underpotentials. The mass activity of all the three Pt monolayer electrocatalysts investigated, viz., Pt/Au/Ni, Pt/Pd/Co, and Pt/Pt/Co, is more than order of magnitude higher than that of a state-of-the-art commercial Pt/C electrocatalyst. Geometric effects in the Pt monolayer and the effects of PtOH coverage, revealed by electrochemical data, X-ray diffraction, and X-ray absorption spectroscopy data, appear to be the source of the enhanced catalytic activity. Our results demonstrated that high-activity electrocatalysts can be devised that contain only a fractional amount of Pt and a very small amount of another noble metal.     

Mechanisms investigation of the WGSR catalyzed by single noble metal atoms supported on vanadium oxide clusters

The redox and carbonyl mechanisms of the water gas shift reaction (WGSR) catalyzed by the single noble metal (NM) atoms of Ru, Rh, Pd, Ag (from the 4d row) and Os, Ir, Pt, Au (from the 5d row) supported on vanadium oxide cluster ion V₂O₆⁺ have been firstly investigated through the density functional theory (DFT) calculations. Natural population analysis (NPA) shows NMs possess positive charges in the model systems and usually act as reactant molecule trapper and an effective electron store to accept or release electrons. The carbonyl mechanism avoiding the oxygen vacancy (O_v) formation and directing NM‐H bond cleavage is strongly preferred over the redox mechanism. Our computations identified single‐atom catalysts (SAC), especially RhV₂O₆⁺ and PdV₂O₆⁺ exhibit improved overall catalytic performance because of the lower rate‐control step activation barriers via the associate carbonyl mechanism. This work aims to provide some detailed insights into the effects of NM in bimetallic oxide clusters for WGSR at a molecular level, and serves as a starting point for further theoretical studies on the mechanisms of related SAC catalytic reactions.     

Pb deposition on I-coated Au(111). UHV-EC and EC-STM studies

This article concerns the growth of an atomic layer of Pb on the Au(111)( radical3 x radical3)R30 degrees -I structure. The importance of this study lies in the use of Pb underpotential deposition (UPD) as a sacrificial layer in surface-limited redox replacement (SLRR). SLRR reactions are being applied in the formation of metal nanofilms via electrochemical atomic layer deposition (ALD). Pb UPD is a surface-limited reaction, and if it is placed in a solution of ions of a more noble metal, redox replacement can occur, but limited by the amount of Pb present. Pb UPD is a candidate for use as a sacrificial layer for replacement by any more noble element. It has been used by this group for both Cu and Pt nanofilm formation using electrochemical ALD. The I atom layer was intended to facilitate electrochemical annealing during nanofilm growth. Two distinctly different Pb atomic layer structures are reported, studied using in situ scanning tunneling microscopy (STM) with an electrochemical flow cell and ultrahigh vacuum surface analysis combined directly with electrochemical reactions (UHV-EC). Starting with the initial Au(111)( radical3 x radical3)R30 degrees -I, 1/3 monolayer of I on the Au(111) surface, Pb deposition began at approximately 0.1 V. The first Pb UPD structure was observed just below -0.2 V and displayed a (2 x radical3)-rect unit cell, for a structure composed of 1/4 monolayer each of Pb and I. The I atoms fit in Pb 4-fold sites, on the Au(111) surface. The structure was present in domains rotated by 120 degrees. Deposition to -0.4 V resulted in complete loss of the I atoms and formation of a Pb monolayer on the Au(111), which produced a Moiré pattern, due to the Pb and Au lattice mismatch. These structures represent two well-defined starting points for the growth of nanofilms of other more noble elements. It is apparent from these studies that the adsorption of I- on Pb is weak, and it will rinse away. If Pb is used as a sacrificial metal in an electrochemical ALD cycle and adsorbed I atoms are employed for electrochemical annealing, I atoms will need to be applied each cycle.     

Sustainable and Selective Modern Methods of Noble Metal Recycling

Noble metals exhibit broad arrange of applications in industry and several aspects of human life which are becoming more and more prevalent in modern times. Due to their limited sources and constantly and consistently expanding demand, recycling of secondary and waste materials must accompany the traditional mineral extractions. This Minireview covers the most recent solvometallurgical developments in regeneration of Pd, Pt, Rh, Ru, Ir, Os, Ag and Au with emphasis on sustainability and selectivity. Processing—by selective oxidative dissolution, reductive precipitation, solvent extraction, co-precipitation, membrane transfer and trapping to solid media—of eligible multi-metal substrates for recycling from waste printed circuit boards to end-of-life automotive catalysts are discussed. Outlook for possible future direction for noble metal recycling is proposed with emphasis on sustainable approaches.     

Neutron activation determination of noble metals using a selective group separation scheme

A rapid and comprehensive method has been developed for the determination of ppm to sub-ppb amounts of Ru, Pd, Ag, Os, Ir, Pt and Au, based on thermal neutron irradiation, dissolution of samples, selective absorption on Srafion NMRR ion exchange resin and high resolution γ-ray spectrometry. Two noble metals “specific” resins were tested for their absorption behaviour. The method has been used for analysis of standard rocks, ores, minerals, lunar samples, coal, coal fly ash, and several biological materials.     

Atomic arrangements inside Ru and Os nanoislands spontaneously deposited on Pt(111)

The atomic arrangements inside Ru and Os nanoislands spontaneously deposited on Pt(111) electrode surface were observed with electrochemical scanning tunneling microscopy. The surperlattice of the pristine Ru nanodeposits is (square root of 3 x square root of 3)R30 degrees -RuO+. Upon reduction, the Ru nanodeposits are compressed to a uniaxially incommensurate (square root of 3 x square root of 2)R30 degrees -Ru structure, which does not change during the following reoxidation. The atomic arrangement inside the pristine Os nanodeposits is an incommensurate (square root of 2 x square root of 2)-OsO+ structure, which does not transform during the subsequent reduction-oxidation cycles. The structures of the Ru and Os nanodeposits are discussed in terms of removal and insertion of oxygen ions depending on electrode potential.     

Binding energy of ruthenium submonolayers deposited on a Pt(111) electrode

We investigated the 3d_5/2 core-level binding energy of Ru in Ru nanoislands spontaneously deposited on a Pt(111) electrode [Pt(111)/Ru], and the binding energies of 3d_5/2 iodine and 1s CO adsorbed on Pt(111)/Ru by the use of X-ray photoelectron spectroscopy. Both iodine and CO were used as surface probes of the electronic properties of Pt(111)/Ru. Little difference was found in the binding energy of Ru in Pt(111)/Ru and in Ru(0001). However, the addition of Ru to Pt(111) induces major changes in the core-level binding energies of chemisorbed iodine and CO as referenced to those adsorbed on Ru(0001). We conclude that the iodine 3d_5/2 and CO 1s C core levels experience higher electronic charge on Pt(111)/Ru than on Ru(0001), suggesting a charge transfer from Pt to Ru, or to a Ru-I surface molecule within the deposit. The charge transfer from Pt to Ru is in agreement with the result of previous in situ electrochemical NMR investigations [P.K. Babu, H.S. Kim, A. Wieckowski, E. Oldfield (2003) J. Phys. Chem. B 107:7595] and confirms the general trend of reduction in the density of states of Pt due to alloying with Ru [J. McBreen, S. Mukerjee (1995) J. Electrochem. Soc. 142:3399]. Theoretical calculations are in progress to further interpret the origin of the binding-energy shifts observed in this study.Dedicated to Zbigniew Galus on the occasion of his 70th birthday     

The structure, growth and reactivity of electrodeposited Ru/Au(111) surfaces

In order to elucidate electronic effects on the oxidation of CO on small Ru clusters, we investigated this reaction on well defined Ru/Au(111) model systems via parallel in-situ STM studies of the structure and electrochemical deposition of Ru on Au(111) in H₂SO₄ solution and cyclic voltammetry of CO monolayer oxidation on these surfaces. The Ru deposit consists of nanoscale islands, which coalesce with increasing coverage. The Ru saturation coverage depends on the deposition potential, resulting in Ru submonolayer (>0.1 V), (defective) monolayer (≥−0.1 V), and multilayer films (<−0.1 V). At potentials >0.6 V irreversible formation of Ru oxide/hydroxide species is observed, which can be partly reduced in the range 0.4 to 0.0 V. CO stripping commences at ≈0.1 V and occurs over a broad potential range. From the stripping charge a local CO coverage on the Ru monolayer islands of 0.7 ML was estimated. The observed influence of the morphology of the Ru deposit on the CO stripping voltammetry is explained by (local) variations in the CO adsorption energy due to electronic modifications of the Ru film.     

Bipolar electrochemical mechanism for the propulsion of catalytic nanomotors in hydrogen peroxide solutions

Bimetallic nanorods are propelled in aqueous solutions by the catalytic decomposition of hydrogen peroxide to oxygen and water. Several mechanisms (interfacial tension gradients, bubble recoil, viscous Brownian ratchet, self-electrophoresis) have been proposed for the transduction of chemical to mechanical energy in this system. From Tafel plots of anodic and cathodic hydrogen peroxide reactions at various metal (Au, Pt, Rh, Ni, Ru, and Pd) ultramicroelectrodes, we determine the potential at which the anodic and cathodic reaction rates are equal for each metal. These measurements allow one to predict the direction of motion of all possible bimetallic combinations according to the bipolar electrochemical (or self-electrophoretic) mechanism. These predictions are consistent with the observed direction of motion in all cases studied, providing strong support for the mechanism. We also find that segmented nanorods with one Au end and one poly(pyrrole) end containing catalase, an enzyme that decomposes hydrogen peroxide nonelectrochemically, perform the overall catalytic reaction at a rate similar to that of nanorods containing Au and Pt segments. However, in this case there is no observed axial movement, again supporting the bipolar electrochemical propulsion mechanism for bimetallic nanorods.     

Ferrous Centers Confined on Core-Shell Nanostructures for Low-Temperature CO Oxidation

A noble metal (NM) can stabilize monolayer-dispersed surface oxide phases with metastable nature. The formed "oxide-on-metal" inverse catalyst presents better catalytic performance than the NM because of the introduction of coordinatively unsaturated cations at the oxide-metal boundaries. Here we demonstrate that an ultrathin NM layer grown on a non-NM core can impose the same constraint on the supported oxide as the bulk NM. Cu@Pt core-shell nanoparticles (NPs) decorated with FeO patches use much less Pt but exhibit performance similar to that of Pt NPs covered with surface FeO patches in the catalytic oxidation of CO. The "oxide-on-core@shell" inverse catalyst system may open a new avenue for the design of advanced nanocatalysts with decreased usage of noble metals.     

Specificity of noble metals dynamic sorption preconcentration on reversed-phase sorbents

The reversible sorption preconcentration of noble metals (NMs) using different schemes “sorbent–reagent–eluent” was investigated. The extraction of Au, Pd, Pt, Ir, Rh and Ru chlorocomplexes from hydrochloric acid solutions on hyper-crosslinked polysterene MN-200 in the form of ion associates with tributylamine (TBA) and 4-(n-octyl)diethylenetriamine (ODETA) was investigated. It was found that Pd, Pt and Au were quantitatively and reversibly extracted using TBA on hyper-crosslinked polysterene; the appropriate eluent for desorption was 1 M solution of HCl in ethanol. Ir, Rh and Ru under these conditions were not sorbed quantitatively. It was found that sorbent hydrophobicity is not the main characteristic that defines the efficiency of sorption of a particular NM ion associate. Different efficiencies of hyper-crosslinked polysterene MN-200 for sorption of square-planar chlorcomplexes of Pt, Pd and Au and octahedral complexes of Ir, Rh and Ru were found. For the first time, the sorbents with their own N-atoms – StrataX and StrataX-AW – were used for the sorption of Ir, Rh and Ru. Using these sorbents, the sorption of Ir was increased up to 95%, and the sorption of Ru and Rh was increased to about 40%. We can explain these results by nonspecific interaction of chlorcomplexes of Ir, Rh and Ru with ethylenediamine groups of the sorbent. Weak bases with large anions may be applied for desorption of Ir, Rh and Ru. Two schemes of dynamic sorption preconcentration of NMs from hydrochloric acid solutions were proposed – hyper-crosslinked polysterene MN-200 for the determination of Au, Pd, Pt, and StrataX-AW for Ir, Rh and Ru.     

The rapid separation and determination of iridium after lead collection and perchloric acid parting

A rapid and accurate method is described for the determination of iridium in platiniferous materials.The method is based on the classical fire-assay collection of the noble metals into a lead button and the subsequent complete dissolution of lead with perchloric acid after heating at 160—180°C. Iridium remains totally unattacked by the parting acid whereas Pt, Pd, Rh and Au pass completely into the perchloric acid-lead perchlorate solution. After filtration, the residue is fused with sodium peroxide, Ru and Os are removed by boiling with perchloric acid, and iridium is finally determined photometrically or by atomic-absorption spectrometry. The proposed method shows a universal applicability and provides what is perhaps the simplest isolation procedure for iridium.     

Hydrogen Spillover Enhanced Hydroxyl Formation and Catalytic Activity Toward CO Oxidation at the Metal/Oxide Interface

H₂‐promoted catalytic activity of oxide‐supported metal catalysts in low‐temperature CO oxidation is of great interest but its origin remains unknown. Employing an FeO(111)/Pt(111) inverse model catalyst, we herewith report direct experimental evidence for the spillover of H(a) adatoms on the Pt surface formed by H₂ dissociation to the Pt?FeO interface to form hydroxyl groups that facilely oxidize CO(a) on the neighboring Pt surface to produce CO₂. Hydroxyl groups and coadsorbed water play a crucial role in the occurrence of hydrogen spillover. These results unambiguously identify the occurrence of hydrogen spillover from the metal surface to the noble metal/metal oxide interface and the resultant enhanced catalytic activity of the metal/oxide interface in low‐temperature CO oxidation, which provides a molecular‐level understanding of both H₂‐promoted catalytic activity of metal/oxide ensembles in low‐temperature CO oxidation and hydrogen spillover.     

Au nanowires with high aspect ratio and atomic shell of Pt-Ru alloy for enhanced methanol oxidation reaction

The methanol oxidation reaction(MOR) is the limiting half-reaction in direct methanol fuel cell(DMFC).Although Pt is the most active single-metal electrocatalyst for MOR,it is hampered by high cost and CO poisoning.Constructing a Pt or Ru monolayer on a second metal substrate by means of galvanic replacement of underpotentially deposited(UPD) Cu monolayer has been shown as an efficient catalyst design strategy for the electrocatalysis of MOR because of the presumed 100% utilization of atoms and resistance to CO poisoning.Herein,we prepared one-dimensional surface-alloyed electrocatalyst from predominantly(111) faceted Au nanowires with high aspect ratio as the substrate of under-potential deposition.The electrocatalyst comprises a core of the Au nanowire and a shell of catalytically active Pt coated by Ru.Coverage-dependent electro-catalytic activity and stability is demonstrated on the Pt/Ru submonolayers on Au wires for MOR.Among all these catalysts,Au@Pt_(ML)@Ru_(ML) exhibits the best electrocatalytic activity and poisoning tolerance to CO.This presents a viable method for the rational catalyst design for achieving high noble-metal utilization efficiency and high catalytic performance.